G1 wifi doesnt work with my local router???? HELP!!!!! - G1 Q&A, Help & Troubleshooting

PLEASE HELP....
i have a TP-LINK wireless router and ive tried connecting to it through my device.
it connects perfectly and it worked once i dont know how after trying for like a million times but once i disconnected it didnt after that
i read somewhere for link sys that by changing the wep key to wpa tpik or something like that
it still doesnt work
im hopeless, every gadget of mine works with the same TP link router
my psp worked my iphone does even my notebook
just that my G1 isnt working at all
it even gets an ip and an excellent signal strenght but the internet doesnt seem to work
Can anyone please HELP..........

change ur settings in the router.
Security mode: WPA personal
WPA Algorithms: TKIP
change ur password n try to conect from the phone.

BrutalHoe said:
change ur settings in the router.
Security mode: WPA personal
WPA Algorithms: TKIP
change ur password n try to conect from the phone.
Click to expand...
Click to collapse
i did doesnt work.....

Related

Mr Clean ROM and Wifi problems

My wifi connected no problem on older ROMS, now it will only connect with the security on my router disabled. If I try to set it to WPA or WEP, it finds the connection but won't connect. I don't really wont to turn off the security everytime I want to use my wifi.
I have a Belkin F5D7632-4 Wireless-G DSL router.
i have the same issue here, it say "connectin" but never connect.
But it does connect without the security? check your authentication method and make sure that what you have on your phone matches your router. I actually did this a while back, and it was driving me insane cause it wouldn't connect. Hope that helps you guys out.
Using WEP on a 802.11g and it works fine for me.
At first I didn't get any options to set the key but once the network was detected I was able to go into "network cards" and put in my key. Works fine with that.

WiFi problems

Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
10332007 said:
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
Click to expand...
Click to collapse
I do have the connection settings in both IE and Opera set to automatic. I's there somewhere else I have to change settings?
I'm quite sure i typed the password correctly. I also checked the client list on the router and the phone showed up correctly.
Gah, cant remember where I saw it but there was a setting in the phone itself for what to connect to.
Another thing to try under the wifi connection open your saved connection and go into it and see if you have it set to connect to the internet or just to the private network under "network type" in the Wi-Fi sub menu of Wlan settings. Its late and I cant think right, i'll see about checking more into it later...
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Wing + WRT54GL
Hi!
I have an S730 and a Linksys WRT54GL router. I've tried to use wlan with my phone, but it doesn't working. I want to use WPA2 with AES without Radius. Is the WPA shared key (router) same to network key(phone)? without security and encryption, it's working well.. I cannot see any syslog. That could be so easy..
klenovcok said:
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Click to expand...
Click to collapse
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
ksga said:
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Click to expand...
Click to collapse
Did you check network settings? I mean e.g. if you don't use DHCP server and you didn't fill in right settings phone may connect to network but may not get outside. I know it can look like "lame" question, but sometimes even a master can do a newbie mistake..
ksga said:
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
Click to expand...
Click to collapse
usually it is in section WLAN Advanced setup - WEP Encryption - disable and in WLAN MAC Filters - active + allow asotiation with table of adress your Wings - aply . I have Zyxel Prestige 660HW.
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
ksga said:
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
Click to expand...
Click to collapse
Your DNS are also provided automatically? Or could you ping (through some app) to any IP address of any server on the internet? If you succee, then we can look for a mistake with DNS.
Problem solved!!!
Okay. Found the cause for all my sufferings...
Power management. under WLAN-settings i changed power setting from power save mode to best performance...
thanks for all the help. hope next time I have a better question
wifi problem
hello everybody,i have tried several times to connect to my router at home but no chance at the end i got this warning saying:
cannot log on to the wireless network this network requires a personel certificate to positively identify you.

ActiveSync causes laptop to drop off line

Hi,
Just got a new diamond and can sync to my laptop with no problem except one thing; when I plug into the cradle it knocks the laptop offline. I need it to stay online because I use the PPC for download TT map or other stuff.
Do you have any suggestions
active sync 4.5
Thanks in advance...
also had this issue, its a problem with WPA wirelessLAN change it to WPA2 at your router
Active Sync kills the WPA encryption WPA2 works
silver1980 said:
also had this issue, its a problem with WPA wirelessLAN change it to WPA2 at your router
Active Sync kills the WPA encryption WPA2 works
Click to expand...
Click to collapse
Thank you bro... I'll try that...
silver1980 said:
also had this issue, its a problem with WPA wirelessLAN change it to WPA2 at your router
Active Sync kills the WPA encryption WPA2 works
Click to expand...
Click to collapse
what abou wpa2 mixed? or should I do only WPA2
i also get experience this problem, its fine at work but on my home pc it automatically disconnects my internet connection.
now for my noobie question, how do i change WPA2 at my router ?
Thanks in advance
gungho2014 said:
i also get experience this problem, its fine at work but on my home pc it automatically disconnects my internet connection.
now for my noobie question, how do i change WPA2 at my router ?
Thanks in advance
Click to expand...
Click to collapse
Enter your router through the set-up area (Web page or software) navigate around and change same...pretty simple!!

WiFi connection unsuccessful

I am having problem accessing my internet connection through my wireless router. Everytime, i tried to connect my G1 to my SSID, it says obtaining IP address then it says unsuccessful.My wireless router is a LinkSys 802.11N with WPA encryption. I did some research and the G1 only accepts 802.11b/g routers? Is that true?
that could be true since it runs on 3G network... just go buy a new routher. i use my FiOS and there is 802.11g router
A N router should be able to trasmit to G adapters. At least thats how it is with linksys routers. No need to even go get a new router . Look under the settings and see if its just broadcasting N or if can Do N and G.
Had this problem. Change your security to WPA2 Personal Only, not WPA1. Should fix it.
h.nocturna said:
Had this problem. Change your security to WPA2 Personal Only, not WPA1. Should fix it.
Click to expand...
Click to collapse
x2
Thats what I had to do. Please specify more information on what ROM your using. Different ROM's have different Wifi drivers

Can't connect my Dream to my wi-fi @ home.

I've googled, i've searched here and I just can't figure out why i cant find my wireless connection on my phone...it finds both of my neighbours connections but not mine...i'm lost here dudes...any help would be greatly appreciated
i've gone through the network settings on my home pc where my router is plugged into...everything is legit there...my ps3 and other computers find it no problem...had my buddy who got me my g1 to bring his over and see if he could figure it out...tried scanning for it and nothing...fml
does his g1 see your wifi?
na his doesn't find it either
check the b/g/n mode on your router is all i can think of.. if it's on "mixed" or n, then try specifying b or g and see if your g1 picks it up
i'll check that out...my other buddy brought over some LG android and his found it no problem
Change the security encryption of theWiFi,wpa /wpa 2psk.It should work.
I had this problem just today with my new router (Linksys WRT320N) and it wasn't picking it up because I wasn't broadcasting the signal.
Once I enabled the SSID broadcast it connected just fine.
Kind of weird because I never had it broadcasting on my old router (Linksys WRT54GL) and it would connect just fine.
jongie123 said:
Change the security encryption of theWiFi,wpa /wpa 2psk.It should work.
Click to expand...
Click to collapse
you mean on my phone or on my pc?
still nada
by the way, I know it's elementary but did you try entering the SSID directly in Add New Network?

Categories

Resources