Spb backuped rom - Tilt, TyTN II, MDA Vario III General

is there any way to via SPB backup or any other backup tool
and any one have the backuped rom wm 6.5 from kaiser
if no then please make it possible for me so i could upgrade via this procedure
Thanks in Advance

Moved as not ROM Development.
and no you can't upgrade via SPB you need to flash which needs hard-spl the instructions are in noob guide how to flash as stated several times...

Related

Sprite backup

i just flashed my Tilt from ATT wm6 to HTC wm6.1
I created a backup file on Sprite Backup. Now i want to restore it and it says that it can cause significant problems if i restore from a different ROM. And wants me to select a Device Upgrade File. Where do i find a Device Upgrade File?
You shouldn't do upgrades from ROM to ROM (especially if it's from 5 to 6 or 6 to 6.1). There's a whole new registry usually and a lot of different things. Just add the program files back and stuff like that, but not the registry. Better yet, reinstall everything manually.
Okay, darn. lol
Now Im learning.
Thanks
starclassic said:
i just flashed my Tilt from ATT wm6 to HTC wm6.1
I created a backup file on Sprite Backup. Now i want to restore it and it says that it can cause significant problems if i restore from a different ROM. And wants me to select a Device Upgrade File. Where do i find a Device Upgrade File?
Click to expand...
Click to collapse
Just thought i'd share, the latest version of SPB backup does let you
restore after ROM upgrade (ROM upgrade mode) & also restore a backup on another device (device upgrade mode)
here's the link: http://www.spbsoftwarehouse.com/products/backup/?en
Cheers.
The Reaper said:
Just thought i'd share, the latest version of SPB backup does let you
restore after ROM upgrade (ROM upgrade mode) & also restore a backup on another device (device upgrade mode)
here's the link: http://www.spbsoftwarehouse.com/products/backup/?en
Cheers.
Click to expand...
Click to collapse
Warning: spb does not yet fully support WM6.1 for his Backup. With Kaiser (WM6.1) it does not work properly (lot of device hangs).
I Think its bricked
I when ahead and downloaded the new rom with WM6.1 for the ATT TILTfrom the HTC website and did everything to the bone and used sprite backup to backup my files but upon restoring them, my screen just boots through att logo and then shows the flying 3G symbols and then blank screen. I can get to the boot loader and but when I try to reflash my phone, using hard spl it says it cannot find my phone. I have spl 3.56 on my phone. Can anyone help me?
When you're in bootloader mode, just flash to the stock ROM and you should be fine.
Thanx all!
I just want to say thanx to everyone who responded and great thanx or asfoor for the wonderful solution for this problem which can be found here.....
http://forum.xda-developers.com/showthread.php?t=348659

Softwareproblem after updating to WM6.1

Hello!
I'm experience som problems after updating my TYTN II's rom, I now have WM6.1 and after this I cant backup my phone. I have tried both SPB Backup and Sprite...SPB hangs the device and Sprite can't backup the database it says.
I also have problems with TCPMP...the app is crashing everytime I start it.
Could anyone please help me???
I am using Sprite Backup 6.2.2. on WM 6.1 with no problems. As it is a different OS, I reinstalled all apps. Did you try to: 1) uninstall SPB Backup/Sprite Backup 2) soft reset 3) reinstall?
TCPMP: there are several versions on this forum, search for this one " TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB", it runs on WM 6.1.
Thanks for your answer anoano!
I got TCPMP to work with the latest release...but I have tried
everything with the backup softwares without any luck.
Any other suggestions?
The latest version of SPB backup (Version 2.0.1) works fine with WM 6.1, the version prior to this (V 2.0) had the hang bug...
niclid said:
Thanks for your answer anoano!
I got TCPMP to work with the latest release...but I have tried
everything with the backup softwares without any luck.
Any other suggestions?
Click to expand...
Click to collapse
1) What version of Sprite Backup are you using?
2) Are you trying to backup on your PC (full version necessary) or on your card?
I am using Sprite Backup full edition Version 6.0.2, Build 2065!

Change rom and restore backup

I've searched at the forum but couldn't find a good answerd for my question.
I got a Vodafone NL X1 it's currently on the Vodafone R2 release but i want to change it to the generic release(hate the vodafone crap). So my question is do I need hard spl to flash another official rom to my X1. I know that you need hard spl to flash a cooked rom but is flashing another official rom the same case?
And another question, i've read on websites that spb backup can restore a backup after a rom update. Does anyone have experience with that and is there a big change that i will have problems with that? And if I use this when I flash the generic rom instead of the vodafone one to my phone does it also restore all vodafone crap?
Hope someone can help me
thanks in advanced,
killer8nl said:
So my question is do I need hard spl to flash another official rom to my X1. I know that you need hard spl to flash a cooked rom but is flashing another official rom the same case?
And another question, i've read on websites that spb backup can restore a backup after a rom update. Does anyone have experience with that and is there a big change that i will have problems with that? And if I use this when I flash the generic rom instead of the vodafone one to my phone does it also restore all vodafone crap?
thanks in advanced,
Click to expand...
Click to collapse
My 2c worth:
a) official ROM's have SPL in them, so you don't need hardSPL to flash these
b) regarding "restore after ROM change", in reverse order:
if you restore a full backup from your existing installation after a ROM change, it will obviously restore all that is currently there - including the Vodaphone fluff
both Spb and Sprite offer "full restore after ROM change" options - however, registry changes from one ROM to the next make this risky. Most cooks will advise against it
Oke thank you for the answerd, will do a fresh install then after the rom update
SPB restore can let you choose what to restore, the necessary things will be contacts, sms, email and documents, you can skip the programs, registry and other non personal things, but like this you will need to reinstall all programs and configure them from scratch
killer8nl said:
Oke thank you for the answerd, will do a fresh install then after the rom update
Click to expand...
Click to collapse
Yes, that's the technically correct way.
After you've upgraded the ROM and re-installed all your apps, (say) weekly Spb or Sprite backups for a full restore are obviously viable. I've been doing this for about 5 years now - saved my bacon more than once.
Still, I agree that re-installing all the apps after a ROM upgrade is a real pain in the butt. People who change ROM's constantly must have another day phone on the side
I tried to update the generic NL R2A rom from my vodafone NL R2A phone but it doesn't work. It keep saying "No image file!".
I also got another question. Is it really necessairy to format my ms before flashing. Because I only got the hancock ms and it said not to be working again when I format the ms. Thats why I didn't format the ms yet and only tried without formatting.
I have read almost all tutorials but all said I must use the hard-spl but other forums posts said I don't need when using a official rom. Anyone can help me a bit further please?
Regards,

P3600i Backup Flash Install wm6.5

Hi everyone..
I am having HTC P3600i .. I wanted to flash existing ROM and want to install windows' newer version 6.5 ( WM6.5 )
Can anyone help me to find proper download link and any tutorial how to take backup of existing ROM and flash existing software safely and install WM6.5..??
Thanks in advance

How to upgrade from 6.1 to 6.5(xperia x1)

kinda newbie here in terms of custom ROMs or flashing but could somebody give me a step by step procedure for me to be able to upgrade my xperia x1 6.1 to 6.5? just don't want to brick my phone.
i know that there are lots of tutorial here but i can't find which is the best & stable.
every one is quite stable, if you charge your phone 100% and don't plug your cable out of the phone nothing will go wrong.
After hardspl use SD-Methode to put your 6.5 rom on your phone it's the simpliest way, there you cannot damage your phone with putting a x1 rom on your x1 (with roms from other phones it could damage your phone but i am not sure)
1-unlock yr phone with spl 0.78
2-connect phone with full charge(20% is enough)
note: DON'T use task 29 if u don't flash yr device everyday!
3-try romes to find yr best choice
there is nothing in a simple regular flashing to brick the device
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Wakatsik said:
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Click to expand...
Click to collapse
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
the link for rom I proposed
Dynamics 2.2.0
manishabanzadeh said:
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
Click to expand...
Click to collapse
thanks, will try that & give you feedback
another set of questions....
these are the instructions in flashing x1 to 6.5 but don't understand most of it, sorry for the stupidity =)
-----------------------------------------------------------------------------
Installing:
0) Make a system backup!
Useful apps: SPB Backup, PPC Pim Backup, Sprite Backup
1) Install Hard-SPL 0.78 by OliNex!
2) Put needed cabs to \Storage Card\autocfg\.
Supported formats: *.cab, *.provxml, *.reg, *.rgu.
*.CAB: by default they will be installed to internal memory. Cabs with "_ui" in their names will have an opportunity to be
installed to storage card.
*.EXE: AlphaUC can install *.EXEs from \Storage Card\autocfg\exe\. If you add "_nowait" to filename, customizer won't wait
until it finishes
3) Use task29. !!! Put kovsimg.nbh to storage card !!!
Link: http://forum.xda-developers.com/showthread.php?t=649230
4) Then flash needed ROM as always (via storage card or via CustomRUU). Make a Hard-Reset.
5) Wait for the end of customization. You will see message about it on the second launch.
After that make a soft-reset.
-----------------------------------------------------------------------------
help, the link for task29 is missing, how can i continue?
for number 4, how will i do that?
android froyo 2.2 for xperia x1
hello, guys i'm kinda newbie. how do i get the android froyo 2.2 for my xperia x1. pls help. thanks

Categories

Resources