alignscreen: I can't get any further - Tilt, TyTN II, MDA Vario III General

Is there an option to skip this test? I can't use my phone anymore this way

Which rom do you have? have u tried a hard reset?

clarbj said:
Which rom do you have? have u tried a hard reset?
Click to expand...
Click to collapse
WM6.5.3|WWE|101m|XDAUC|Full Roms By jjblaster3|28205|translatable|8/Jan/2010
I did multiple resets, but now I can't even get the aligment screen (stuck while booting, can't upload other firmware).
edit: now I have the align screen back (I think I should installed the radio before I flashed), is there a way to get around this?
edit: I can flash again.

I flashed back @ 6.1 for now
Should I install another radio just to boot with other firmware?

robuser007 said:
I flashed back @ 6.1 for now
Should I install another radio just to boot with other firmware?
Click to expand...
Click to collapse
but I also have the align screen (can't pass that scren, is very difficult).

I have read that I can delete a file and so skip the calibration, but which file is that? (getting really nuts)
edit: I have o permissions to do that.
I wish I never updated anything, now I can trow it away I guess.
The program Screen remote alignment (In English) doesn't work.
update: always do this:
To bypass screen calibration just put an empty file called "welcome.not" on your storage card.
please make this a sticky.

Moved as not ROM Development...

Related

[Q] Problems after a dodgy install.

DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave

diamond bricked :( HELP!!!

Its working now - keeping my fingers crossed... it obviously wasn't bricked... i don't know what happened but all i did was flash the radio to what it came with 1.00.25.05 and voila!
guys i need help... i think my diamond is bricked - maybe someone here could tell me if it really has or is there a way out.
the first screen appears the touch diamond screen, and then the windows screen (the green one) and then it restarts... and this is what keeps on happening...
any idea? any help would be much appreciated!
thanks
ps. already tried hard reset... same thing happens...
ps. 1.40olinex unsigned
Have you tried a HARD reset?
tried hard reset - no help
Maybe the ROM is corrupted on yuor phone. Try getting to bootloader and flashing again.
the_scotsman said:
Maybe the ROM is corrupted on yuor phone. Try getting to bootloader and flashing again.
Click to expand...
Click to collapse
i got into the bootloader - connected it to the USB - shows USB on the bottom... how do i flash a rom then? CustomRUU? or is there a way to place the nbh on the internal storage?
There's No way to place it on the internal storage if you cant get into Windows. This is why I always keep a copy of my current ROM in the Internal Storage, so i can reflash if I need to.
Try doing it over USB, it should still work.
no luck
the_scotsman said:
There's No way to place it on the internal storage if you cant get into Windows. This is why I always keep a copy of my current ROM in the Internal Storage, so i can reflash if I need to.
Try doing it over USB, it should still work.
Click to expand...
Click to collapse
tried a couple of times... restarts... either at 10% or 12% or 23%... tried rebuilding the nbh as well
http://forum.xda-developers.com/showthread.php?t=409425
it just restarts randomly!
rom flashed, radio flashed - still restarts
flashed ROM & Radio... but problem still there... restarts after first windows green screen
cloudedhopes said:
flashed ROM & Radio... but problem still there... restarts after first windows green screen
Click to expand...
Click to collapse
if its under warrenty, flash original ROM, Radio and SPL then send it back as faulty
mugglesquop said:
if its under warrenty, flash original ROM, Radio and SPL then send it back as faulty
Click to expand...
Click to collapse
i want that to be the last option i want to try more! someone should have some help here... i hope
mugglesquop said:
if its under warrenty, flash original ROM, Radio and SPL then send it back as faulty
Click to expand...
Click to collapse
hey thanks man - you gave me the idea of going back to originals... i only went back to original radio and it's working
your phone probably didn't like that particular hard-SPL version.

Stuck on bootloader screen!!! Help!!

I've been waiting for hours for someone to help me and I searched and searched, I can't find any help!!! I have to go to work soon and I've been on this screen since 7:30AM EST!
Looks like I'm stuck at the boot loader screen and it goes back to it when I do a soft rest. I can't do a hard reset since I can't turn off the phone.
I think it's the bootloader screen.
Says RUUNBH on the top right corner and the screen is red, green, blue and white which these codes or whatever.
Took the battery out for a few and it went right back to that same screen.
Can someone help me bring back my Rhodium to stock???
EDIT: I might of posted this in the wrong section. Should this be in Rhodium General?
*UPDATE*
ark666 found the stock rom for T-Mobile HTC TP2 and I did a flash to get it back! Thank you so much ark666!!!
Flash stock rom.
I have no idea on how to do that, I searched how-to's but I can't find any full instructions or where to get the stock rom for T-Mobile HTC TP2.
This is the worse ever!!! Somebody please!!!
Isn't this the best site for things like this?
Try a manual hard reset? The instructions should be in your manual.
It says while the phone is off to HOLD SEND/END key with the power until the message comes up. The phone wont turn off unless I take out the battery for me to do a hard reset.
EDIT: I took the battery out then put it back in. The phone is now off, I hold the buttons and did the hard reset. It went right back to the boot loader screen.
hi,
what happend after you hard reset the device?
regards,
twisted
Asked me to press the VOL UP button to reboot. I did and it went right back to the boot loader screen. A flash happened on the screen when I try a soft reset and it says really quickly!..."NO IMG FILE" then it goes back to the 4 color screen.
EDIT: Image below on how my screen is since 7:30 AM EST!!!
on some device, active the RUU, connect it to PC & press soft reset button (the one in side the battery cover).
don't know if it help, just try that
good luck
Thanks for the reply, but that was the first thing I tried. Looks like I will have to go to work with no phone! This is crazy on how this can't be resolved.
Looks like you've basically erased the flash I'd say...
If you can get the t-mobile image, then try flashing that back to the device... If you connect a usb cable to your device, at the bottom, where it says serial it'll change to usb...
Or, if you have a goldcard, maybe try installing another image. But I'd say you're best to install the t-mobile image if you can get one?!
Ok so where can I get an image that will work on my phone? I also will need instructions on how to do it properly.
HeavyComponent said:
Ok so where can I get an image that will work on my phone? I also will need instructions on how to do it properly.
Click to expand...
Click to collapse
Where are you from? Can you find the rom on your tmobile site?
Or, creat a goldcard, copy the RHODIMG.nbh into the root of the card and try flashing that...?
As far as I know, your device is not bricked, you simply need your original supplier rom...
I replied to the PM (basically do set 16 0 command in mtty)
but I see your photo now - you have 0.85.1000 SPL? that's mfg SPL so if "set 16 0" did not help (you didn't describe what you did to the phone when this happened), you can just take any official rhodium ROM and flash it
sorry if I misread your photo... quite blurry
Ok that's my main problem that I've been having. Where can I get an official Rhodium ROM and how do I do a flash? I've been searching all morning.
And yes 0.85.1000, that's what it says on the screen.
I tried to this ROM...Link: http://forum.xda-developers.com/showthread.php?t=548546
Did the goldcard, but I think I did it wrong. I added the RHODIMG to the SD then tried to update my TP2. That's when I got an error saying it's not for PDA and how I need to update my utility.
I got the steps to do the goldcard correctly, I just want to take another shot at updating this ROM.
lovelldr said:
Looks like you've basically erased the flash I'd say...
If you can get the t-mobile image, then try flashing that back to the device... If you connect a usb cable to your device, at the bottom, where it says serial it'll change to usb...
Or, if you have a goldcard, maybe try installing another image. But I'd say you're best to install the t-mobile image if you can get one?!
Click to expand...
Click to collapse
hard reset doesn't erase the OS image.
HeavyComponent said:
Ok that's my main problem that I've been having. Where can I get an official Rhodium ROM and how do I do a flash? I've been searching all morning.
Click to expand...
Click to collapse
see my PM first, maybe set 16 0 will be enough.
is your SPL version really 0.85.1000? how did you get this phone? what happened when it got stuck on bootloader screen?
as for flashing, see xdadev wiki on rhodium.
Ok, will try what you PMed me. Brb!
It says 0.85.1000 on the screen so I guess so and I got it from T-Mobile. Ordered it through Customer Service.
post #15 has been updated to let you know what I was trying to do.
HeavyComponent said:
Ok, will try what you PMed me. Brb!
It says 0.85.1000 on the screen so I guess so and I got it from T-Mobile. Ordered it through Customer Service.
post #15 has been updated to let you know what I was trying to do.
Click to expand...
Click to collapse
then the set 16 0 will work just fine
weird the rom didn't work though
I have just flashed the 6.5 rom which you flashed
It does change the spl to 0.85 and i have the exact the sameimage which you have shotted during the flash process. But the process of this rom's flashing has two stage, it will restart after first 10% and show up the image which you shotted and upload, and continue afterwards. i guess ur goldcard has the problem so it stops and stucked there. Try other sign roms would be a better solution.

SE Updater failed to install new rom, what is the best thing to do now?

Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
original roms will still work with original spl... but nevermind =P
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)
meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.

problem on calibration screen after flash

hello i have flash a new rom 1.56xx on my blackstone spl 1.54 and when i do the calibration the screen goes white and after 2 second it returns on the calibration screen and doesn't go forward. i tried 3 or 4 different rom and also to restore the original spanish rom but the problem remains.
HEEEEELPPPPP
i tried also hard reset but nothing the problem remain
You need to accurately press the mid point of the crosses with a stylus. If it returns to the calibration screen it generally means that you have not accurately calibrated the screen.
i tried so many many times with stylus but it return every time in calibration. I have a question. can i with ceregistryeditor modify a value to skip the calibration?
vegelith said:
i tried so many many times with stylus but it return every time in calibration. I have a question. can i with ceregistryeditor modify a value to skip the calibration?
Click to expand...
Click to collapse
Solutions:
1) Do not quick tap the "+" signs, press them (and wait) until they get moved by themselves.
2) If you have screen protector on your screen then it's time to replace it.
3) Please flash the official ROM first and then flash a custom ROM.
I believe the solution #1 should take care of your experience.
Try this then:
The solution to skip or bypass the screen alignment process altogether. (Some Chefs do this already, namely Dutty, to among other things speed up the set up process.)
How to do it: there are a couple of ways you can find in the forum, however, one way is to create a blank text file called, welcome.not, instead of welcome.not.txt, and place it in the root of your storage card. Next, flash a new rom or hard reset and you're done.
If all goes to plan, the "welcome" phase will be bypassed, any you will not be prompted to align the screen or set the date, location, time etc. If for some reason it does not, go into the root of your SD and manually with your stylus or via activesync on your desktop create a new blank file in there and name it welcome.not.
Click to expand...
Click to collapse
EDIT - Nevermind, I see ClydeB1 beat me to it with bypass solution above
pkshr said:
Solutions:
1) Do not quick tap the "+" signs, press them (and wait) until they get moved by themselves.
2) If you have screen protector on your screen then it's time to replace it.
3) Please flash the official ROM first and then flash a custom ROM.
I believe the solution #1 should take care of your experience.
Click to expand...
Click to collapse
1) tried doesn't work
2) i don't have screen protector.
3) tried
clydeb1 said:
try this then:
Click to expand...
Click to collapse
i love you!!!!!!
vegelith said:
i love you!!!!!!
Click to expand...
Click to collapse
Easy now, what would my wife think
Glad it worked for you.
Fallen Spartan said:
EDIT - Nevermind, I see ClydeB1 beat me to it with bypass solution above
Click to expand...
Click to collapse
For once
i flash with leonext 6.5.1 rom it doesn't work :°°°°°°°°°°° sigh i have to put original rom sigh
vegelith said:
i flash with leonext 6.5.1 rom it doesn't work :°°°°°°°°°°° sigh i have to put original rom sigh
Click to expand...
Click to collapse
Using the method pointed out by ClydeB1, did it skip the alignment process? Please elaborate further on what didn't work. Out of curiosity, when you first began having this problem did you flash with your SD card in?
I have open the .nbh file with htc rom image editor and i have overwrite welcome.ink with a blank file. GREAT
i think that the problem is not with the rom but with the display. i have to jump the calibrate and with official rom with welcome.not in the root dir of the telephone and the storage card it works. with cooked rom no. when i reset the device the file in storage card remains but the copy in the root of telephone disappears. after so many hours of attemptes i have modified the rom and now i jump the calibrate

Categories

Resources