Database Develop

bluetooth headset: music + calls + gps indications

Hello dears, I get a kaiser and now I'm looking for a BT headset, my problem is I can't find wich special feature (if any) need the BT headset have to choice one and buy it with confidense.
I want to mount it to a motorbike, and I want to be able to receive in the BT headset music + calls + gps voice indications. Investigating some time I found that this can be possible with a software like BTToggle or VoiceRoute or so, to route all the sound of the HTC to the BT headset.
I hope this is true, but now I can't found if we need look some special feature or especifications in the BT HEADSETS available here in the market, and I have not the opportunity of test one and others.
Can someone tell me wich compatibility need I look for in a BT HEADSET for the HTC TYTN II and the custom explained needs above ?
Thank you very much! greetings from Argentina!
- Martin

i believe u need a bluetooth stereo headset for it to pass music/system sounds through (I bought a samsung h350 for 4.99 and found out it cant do that ). Microsoft Voice commander works nice, it announces texts, calls, reminders, etc.

The Jabra 8040 is both a phone and music/audio Blue Tooth. They aren't too expensive. I am unsure if it will interupt the music for voice navigation prompts. Someone running one would have to let you know. I do know it interupts music for calls.

hi, there is this program ( i cant remember the name), but it allows you to stream all sounds from your phone to your headset, regardless of what kind of bluetooth headset you have. does anyone know what program it is?

BH-503 and Xperia X1

I tried paring my BH-503 headset from nokia and it seems i cant make good use of the call button, forward and reverse button, and play and pause button.
Do you have solutions to this?

Just tested it on my xperia x1 and all seemed to work fine.
Maybe try a hard reset and pair the device again?
Good luck

i just noticed that bluetooth controls on my headset didn't work on the Media Panel. Tsk..
Anyway... For owners of BH-503 (or maybe other bluetooth stereo headsets) try using Windows Media so that you could use the controls.
I hope this one helps..

Bluetooth connetion aborts

Hi.
I've a problem with my "old" Diamond^^
When I connect a bluetooth headset to my Diamond and want to listen to my music it works.. but when I use the hardware-keys on my headset (play/pause, skip) it quits the bluetooth connection after 10 to 15 seconds and plays the music loud with the build in speaker. The keys still work but I can't get any music output from the headset. I have to reconnect it to use it again..
When I just use the software buttons (TF3D or WMP) to navigate through my music there is no problem neither.
With my Diamond2 there is no problem. I can listen, and skip and do whatever I want and it stays connected.
Anyone knows how to solve this issue?
[edit]
tryed different roms! Gen.Y, AZTOR, BsB's...

No one has any idea?
[edit] With my Bluetooth Car radio everything works fine. But it doesn't have any button to interact with the phone but the answer call button.. So why did my Stereo headset work with the Diamond1 for month and now acts like this?

Headset Creative

Hello, I'd like to ask you what do you think about using Creative HS-930i with HTC HD2. This headset is for iPhone but it has 3,5 jack so I think it could be able to work with HTC HD2.
Would you recommend me another headset?
I need a headset with microphone and some buttons (play music, pause).
Thanks.

i think it won't work
i once tried the original apple headset with controls, but they remote didnt work.
so i guess this is the same here.
DN41

Sony Ericsson MW600 Headset

Anybody here has tried to use the "Hi-Fi Wireless Headset with FM Radio MW600" with the Ameo?
My Ameo has the (German) HTC WM6.0 stock ROM but I want wo try a WM6.1 ROM. I want to make calls with the MW600 bluetooth headset, voice dialing and audio steaming. And caller-id on WM600 display would be very nice.

bluetooth disabled after pairing
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.

Purzelkater said:
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Click to expand...
Click to collapse
I able to pair this mw600 with my laptop and 2 phones(HTC Touch Pro2 and Sony Ericsson F305).
1) I can answer a call from SE F305 while on movie from laptop/FM/musci from HTC without any prob. The quality of this device SUPERB!!
2)The only prob is with HTC,I can't pair HTC with MW600 while on movie from laptop/FM/music from SE F305. I tried change many option and tweak but hopeless. Anyone have a solution for my problem?Or MW600 compatible multipoint with SE phones only?
TQVM