Hi guys!
I have a problem with my Diamond.
I've bought a AD2P stereo bluetooth headset. At home I have a wireless network and sometimes I am watching some video's with the Youtube application over Wifi. At first I was using the original headset, everything works fine. But now I am using the AD2P headset and now the streaming is very slow and choppy. It has to buffer every 10 seconds!
Does anybody knows what the solution is for this problem?
Kind regards,
Rinse Ringma
(Ps. Don't mention my crappy English, I'm from Holland)
Related
I am using iTech S38 bluetooth stereo headset.
My Music/video player is TCPMP 0.72RC1
I had paired my O2 XDA IIi with this itech S38.
The 2 setup I had done:
Hands-free/Headset setup and High Quality Audio setup.
Playing MP3 is okay, and would auto disconnect my bluetooth after few minutes when i backlit goes off. Is there any way to stop this?
As for video playback, all the bell whistle accessing the menu can be heard, but whenever i hit play, it simply disconnect my BT connection.
Anyone know what is the issue?
I am using Pug Asian firmware with O2stuff stripped.
Someone told me.. it could be the A2DP patch.. but how can I tell what patch I am using? Native BT profiles does not have A2DP on original O2 XDA IIi firmware.
Thank you.
Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....
Having Bluetooth "Handsfree" and A2DP connected at same time causing severe skipping
Hi....I know there are a lot of posts regarding skipping while playing MP3s over A2DP. My problem is perhaps a little bit different because I've narrowed my problem down to the handsfree bluetooth service.
Here's my situation with my unlocked HTC TyTN II using the stock HTC ROM and with no registiry modifications (bitpool, etc)
If I have only A2DP connected and streaming music to an external bluetooth receiver the MP3 playback is flawless. It sounds fantastic. I've tried Windows Media Player, PocketMusic, and PocketPlayer and they all work just great.
However, when I turn on my handsfree headset (which is a separate device from my A2DP receiver) and allow it to connect to my TyTN II, extreme stuttering immediately occurs through the A2DP music stream. When I shut off my handsfree headset the stuttering stops and the music stream returns to its usual fantastic sound. The problem can be replicated also by leaving the handsfree headset powered ON and simply enabling handsfree service on the HTC TyTN II to cause the stuttering to begin. The stuttering stops immediately when handsfree service is subsequently disabled.
Anyone else out their experience this? Any suggestions? For the time being I have to resort to disabling handsfree when streaming music to my A2DP bluetooth receiver.
Skipping/Cutting out/Speeding Up/Slowing down
Not much to add other than 'Me Too!' and thanks for tracking this down since i thought i was going nuts since I've had a couple of times where i thought i had it resolved only for it to crop up again.
Are you also experiencing your A2DP audio speeding up and slowing down along with the audio cutting out? since to me that is the most bizarre of all of the audio freakery going on.
I found my Logitech handsfree less likely to cause cut outs when on than my Jawbone does. but neither were trouble free.
Just an update for those that may experience the same problem as me. I've noticed that sometimes I have perfect audio even though I am connected to my handsfree car system while streaming music via A2DP. So this leads me to believe that bitpool settings and such are not the issue...since the perfect audio can occur with the default settings. I have also heard in other threads that flashing a new radio may help...but haven't gone to that measure yet.
What I have been able to determine is that this horrible skipping/stuttering occurs when my phone is changing cell phone towers.
That is, if
1) Streaming audio over bluetooth via A2DP
AND
2) Tytn II also connected to a handsfree device
then A2DP skips horribly when the phone needs to switch cell towers.
I have confirmed this by using the program PhoneAlarm to log the cell phone towers my phone is connected to. My A2DP stuttering/skipping problem coincides with every change in cell phone tower.
Now having said all this there is still one other factor that plays into it that I haven't quite figured out. If I soft reset my device and then immediately connect to my car and A2DP stereo then I do not get the stuttering problem when changing cell phone towers. However if I spend the day using the device, active-syncing and such at work, then on the drive home I will ALWAYS get the stuttering during every cell phone tower hand-over.
Frustrating. Anyway...hopefully I'll eventually figure out the last piece of the puzzle. I would rather not have to soft reset every time I get in my car just so that I can get good audio.
--------------------------------------------------------------------------------
hondophred said:
Are you also experiencing your A2DP audio speeding up and slowing down along with the audio cutting out? since to me that is the most bizarre of all of the audio freakery going on.
Click to expand...
Click to collapse
I do recall getting this behaviour when using Windows Media player...but I have started using the new Pocket Player and have since never experienced the audio slow down problem.
I found a work-around that works for me. It's posted here:
http://forum.xda-developers.com/showthread.php?p=1990783#post1990783
Yet another A2DP skipping problem
Rumball said:
I do recall getting this behaviour when using Windows Media player...but I have started using the new Pocket Player and have since never experienced the audio slow down problem.
Click to expand...
Click to collapse
I seem to have related but a different problem with skipping.
I have both Sony and goldlantern BT headphones which i tried (stereo profile).
Both severely skip audio when located on the left side of my belt. Silly but the reception/skipping problems improves a GREAT deal when i move it to the right side. It works flawlessly inside of the building where i have no phone signal but outside -- it skips horribly, even worse after 6.1rom upgrade.
Can anyone confirm that the BT signal going through the body worsens skipping? If so, I assume the signal strength/BT/wireless channel may be at fault, not the tower switching as for me, it happens even when I stay stationary.
Any help is GREATLY APPRECIATED!
TILT - R2 VEGA WM6.1 CE OS 5.2.19209 (Build 19209.1.0.2) ROM
I think part of the problem can be the A2DP device as well. I had a pair ofr HT 820 older bluetooth headsets with A2DP that were skipping and annoying. I went out and bought some s9s and the problem went away. I figured just for a test I would try the HT820 out again, still skipping. So for me it was not the phone but the A2DP device.
jallenclark said:
I think part of the problem can be the A2DP device as well. I had a pair ofr HT 820 older bluetooth headsets with A2DP that were skipping and annoying. I went out and bought some s9s and the problem went away. I figured just for a test I would try the HT820 out again, still skipping. So for me it was not the phone but the A2DP device.
Click to expand...
Click to collapse
i thought that too but i have two different headsets from two different manufacturers, both are skipping the same...
A2DP requires a lot of the bandwidth Bluetooth can provide. Having a 2nd connection open simply exceeds what the Bluetooth chip can handle, no surprise in that. If the BT headset keeps the connection open it's very likely to happen.
kilrah said:
A2DP requires a lot of the bandwidth Bluetooth can provide. Having a 2nd connection open simply exceeds what the Bluetooth chip can handle, no surprise in that. If the BT headset keeps the connection open it's very likely to happen.
Click to expand...
Click to collapse
what do you mean by a SECOND CONNECTION?
i have 2 different headsets because i thought that i have a poor headset, but both work similarly bad, which makes me think it is the tilt, not the headphones. i do not have 2 connections, never has it and not even sure if it is possible....
Lowering of bitrate did not help at all.....
Anyone have experienced these problems? anyone is using BT headset besides motorola s9?
On mine it does it when it picks up a wi-fi hotspot. When I'm driving the wi-fi is on when the screen is and whenever I pass a hot spot it drops out. Turning the wi-fi off solved it. Don't know if it does it with cell towers.
gs465 said:
what do you mean by a SECOND CONNECTION?
Click to expand...
Click to collapse
The thread was initially about skipping when BOTH an A2DP stereo headset AND a BT handsfree were connected at the same time, as the title shows. I was commenting on that.
Other than this, when I want to listen to music I can leave the Kaiser in my room and walk around in my entire flat with the headphones on without skipping (around 10-15m straight line, with some walls).
However, Wifi must not be active and communicating, otherwise either / both of them will drop. If I'm using Wifi and start streaming audio via A2DP, the wifi will slow down a lot and sometimes disconnect. In the same way if Wifi is communicating the audio will skip. If both of them are active but one is idle everything's fine. But that's also normal as both share the same frequencies and will step on each other. When usage is low it's not noticeable but when both are using a lot of bandwidth then they will disturb each other.
The cell radio doesn't seem to cause any problems for me.
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
Not having experience of this unit this may be down to the individual headset and I hope some others will come in with experience of this.
Does the headset support both Headset and Wireless Stereo profile?
If it does not, the function may not be supported. I use a Promate PM-2600 and it supports both and when I have selected Wireless Stereo (this has to be done manually!) it works without problem when answering a call and passing back to music or video play.
Hope someone with information on this particular unit gets back to you.
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Click to expand...
Click to collapse
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
jazzman-t said:
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
Click to expand...
Click to collapse
I'm facing the same issue as well! Tried numerous hard resets and fixes you would have thought imaginable! Unfortunately the problem is still existent and it is freaking irritating when you have to press the play button to repair the headset. Worst still - when the music starts playing through the speaker after a call, everyone starts to look at you like you are some moron.
I do really hope there is a way to resolve the problem. Any new fixes i can try???
Senior members? Any help?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
I have this exact same problem on my Sony Ericsson HBH-DS220.
The bluetooth will disconnect after hanging up a phone call. I don't press anything on the headset, I wait for the other person to hang up. When it hangs up, it immediately disconnects the bluetooth headset.
Annoying!
Probably a problem with the bluetooth stack then. The stack is already known to be very buggy and have problems with lots of Bluetooth devices. Luckily, unlike the graphics card, it looks like HTC will be releasing a fixed Bluetooth stack at some point in the future. In the mean time, you are probably out of luck.
Bluetooth connection problem also with Tilt
I have a Plantronics 510 BT earpiece that for no discernible reason is connected one minute and gone the next too. I haven't been able to determine any combination of actions, such as ending a call as the culprit. I always have to make the connection manually between the earpiece and the Tilt also - it never links automatically when I turn the earpiece on like it did with my Treo 650. I've had this Tilt for 3 days and this is probably going to be a show stopper and make me return it to at&t before the eval period in spite of everything else good about the phone. I also have a Plantronics Pulsar 590 stereo headset that I haven't experimented enough with yet to know if the connection is as flaky. But the bottom line is - I'll be damned if I'm going to try to fiddle with establishing a connection and all the steps it can take while I'm driving down the road!
HTC CLUB
I FOUND THIS FILE AT HTC CLUB... Dont know if it will fix your problem or not .. but its for some BLUETOOTH BUG ... This File is For TYTN2...
Description From HTC CLUB:
12/19/2007
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Hope This Helps
Hello! Салам!
I have LG Thrill 4G. I like to use Bluetooth Earphones to listen to music on it.
But when I try to watch video with bluetooth earphones, trouble I have. The audio, it plays fine. The video, it does not. It is jumpy and jerky and not smooth. Misses frames. Video play normally when not using bluetooth, when I have earphone plugged in.
I have tried Philips SHB7102 bluetooth earphone, motorola S705 bluetooth earphone, and sony MW600 bluetooth earphone.. but it make no different.
I have tried many different type of video file with different bluetooth earphone, and still problem!
I have tried same video file on Dell Streak phone, and HTC Touch Pro II phone, and I do not have this problem with any set of earphones.
Can anyone help me? I use the Stock ROM, I have not changed it.
Thank you from Kyrgyzstan