My phone crashed so I had to perform a hard reset.
After that I tried to reinstall everything that I earlier had in my phone but when I try to install Skandinavisk_ppc_tastatur.exe, the installation goes really well but when I restart my phone the HTC logo will appear and after that the whole phone freezes = won't boot to "Windows 6.1" screen.
I've now performed head reset twice because of that problem but I really would like to restore that Scandinavian on screen keyboard to my phone.
Any hints how to solve the problem? Any other freeware on screen Scandinavian keyboards that would do the trick without "freezing" my phone?
Any help is highly appreciated!
Thanks in advance!
i'm not 100% sure, but you might find luck with a little utility called "SIPChange". search for it and download it.
install SIPChange and then install your keyboard. DO NOT LET THE KEYBOARD INSTALLER SOFT RESET YOUR DEVICE!
goto Settings->Personal->Input and make sure the MS keyboard is set as the default keyboard.
now start SIPChange and set it to change your keyboard to the desired keyboard after a safe timeout. now you can soft reset your device and see if things get better. the expected outcome is:
a. your device should boot completely.
b. your preferred keyboard will popup when needed as if it is set as the default keyboard.
the idea is as follows. there are certain keyboards that you would like to have as default keyboards. these same keyboards often cause boot problems if they are set as default. what SIPChange does is that it leaves the regular MS keyboard as default when your phone boots up. after 30 or 60 seconds into the boot up, SIPChange will set the keyboard of your choice as default.
i'm not 100% sure about what i just wrote but its something off the top of my head that might help. good luck.
Related
Is anyone having the problem where they pick another input type (i.e. PCM Keyboard, TouchPal) and it defaults back to the WM Keyboard? I like to use a soft keyboard for "one-handed" use sometimes. Anyone know of a workaround or fix?
Do a search for SIP changer.cab It allows you to set your default keyboard and it will restore it after a soft reset.
RemE said:
Do a search for SIP changer.cab It allows you to set your default keyboard and it will restore it after a soft reset.
Click to expand...
Click to collapse
I downloaded the SIPChange program and it didn't seem to help. When I reboot, it still comes up with the MS Keyboard. When I select another input method like PCM Keyboard or TouchPal, it goes back to keyboard. Any ideas? This is getting extremely frustrating.
I found with sip changer, you need to run it and make the selection there and confirm it with the button in the middle of the screen, not the OK button in the top right.
If that doesn't help, I'm at a loss as it works fine for me.
If I understand the OP correctly, it isn't simply an issue of what defaults, it's an issue of being able to select the 3rd party keyboard, period. I have the same problem with ToughPal... I install touchpal, it works for a while, then after a while it can't be selected. It's in the pop-up list to select, but selecting it results in the standard keybard. I uninstalled, re-installed, and it worked for a while, and now it's back to not working.
SIP Change also addresses the issue of the 3rd party keyboards not showing up correctly. I'd tried PocketCM keyboard and it had failed, but SIP Change fixed that once I'd executed it correctly.
RemE said:
I found with sip changer, you need to run it and make the selection there and confirm it with the button in the middle of the screen, not the OK button in the top right.
If that doesn't help, I'm at a loss as it works fine for me.
Click to expand...
Click to collapse
I tried a couple of things as well. One of them was to change the setting to 5 seconds first. That didn't work. Once I changed it back to 10 seconds, it worked fine on this reboot. Will post back here if I run into problems again. Also, I only tested it with PCM Keyboard and not TouchPal.
Okay, so I have tried searching for answer to my question, but 90 minutes of reading later, and I'm still no closer to an answer.
I have been tyring to use SIP changer with the HTC Keyboard/keypad (from Dutty's cab collection). When I perform a soft reset, the home page loads and then hangs for about 20 secs, and then displays the 20key keypad on the home page. Until the keypad comes up, the device becomes completely unresponsive and once the keypad is there, I have to click somewhere else on screen to clear it.
First question: anyone know how to fix this? It doesn't happen if I use eg Touchpal as my default input method. I have tried changing the "default delay" time but it makes no difference.
Your help is appreciated.....
EDIT: Just to clarify, I am using SIP change by Sleuth, in case there are other programs out there with the same name.
EDIT2: Removed question 2 regarding complete removal of SIP change as I managed to work it out myself. Question 1 still remains though as, without SIP change, default SIP reverts to standard keyboard, rather than Keypad.
Hi there,
I have the some problem, always when I soft reset my Kaiser the HTC Keyboard/Keypad 20 keys appears on screen of the today screen and I have to touch somewhere to the keyboard disappear.
Any tweak for this situation.
Tks.
After a pretty nasty crash recently (screen turned to interference then total power off), I restored from my SPB backup (thank goodness for that software!)
Since then, the Dutty and HTC touch keyboard + default keyboard haven't worked right, and even re-installing the cab's seems to cause it not to be sorted.
Moreso, if I try and reboot after trying to re-install then the device locks up and never gets to the windows mobile boot screen, so I assume something is getting corrupted somewhere and causing windows not to boot.
So, can anyone please advise how to manually (since the uninstall/remove programs doesn't work in this case) remove the applications:
'duttythroy Default TouchKeyboard.cab'
'HTC Touch Keyboard + Keypad.cab'
Or advise how to extract the cabs and figure this problem out!
A bit of extra info, if it 'thinks' the keyboard/keypad is installed, I can see it in the list of keyboards available to me, but if I pick it, I get the default keyboard and the menu jumps back (I'm guessing it realised the touch keyboard/keypad wasn't working so defaulted back).
Thanks for any advise!
andyb2000 said:
After a pretty nasty crash recently (screen turned to interference then total power off), I restored from my SPB backup (thank goodness for that software!)
Since then, the Dutty and HTC touch keyboard + default keyboard haven't worked right, and even re-installing the cab's seems to cause it not to be sorted.
Moreso, if I try and reboot after trying to re-install then the device locks up and never gets to the windows mobile boot screen, so I assume something is getting corrupted somewhere and causing windows not to boot.
So, can anyone please advise how to manually (since the uninstall/remove programs doesn't work in this case) remove the applications:
'duttythroy Default TouchKeyboard.cab'
'HTC Touch Keyboard + Keypad.cab'
Or advise how to extract the cabs and figure this problem out!
A bit of extra info, if it 'thinks' the keyboard/keypad is installed, I can see it in the list of keyboards available to me, but if I pick it, I get the default keyboard and the menu jumps back (I'm guessing it realised the touch keyboard/keypad wasn't working so defaulted back).
Thanks for any advise!
Click to expand...
Click to collapse
To me, it sounds like your backup is the problem. Hard-reset and use the keyboards without restoring your files first. If they work then some application/file in your backup is causing the problem.
Hi all,
I've finally narrowed down where all my sytem crashes are coming from, and it appears to be my installations of "duttythroy HTC Touch Keyboard" and "HTC Touch Keyboard + Keypad"
Both are installed (HTC one first, then duttythroy), and when I come to type something, the options are there in the pop-up menu ("Touch Keyboard" "Touch Keypad"), however if I select one, the normal keyboard appears and the selected entry jumps back to "Keyboard", so I'm guessing thats because it failed to access/load the touch keyboard?
So I then go to uninstall, and it cannot uninstall either of them, it sits forever with the little spinning icon as it tries to uninstall, eventually failing by either locking the device needing a reset, or by popping up saying it cannot remove the application at this time.
Can anyone provide me manual removal details for this application, I'll need registry, files, etc to remove it as cleanly as I can if possible.
Thanks in advance
I dont know about your system crashes, but the solution to the keyboard and keypad problem is found here:
http://forum.xda-developers.com/showthread.php?t=271008
Hiya,
Thanks for that but I don't believe thats the actual issue, as its not between resets that it won't permit me to select the touch keyboard, its actually when I manually select the touch keyboard it cancels that and reverts back.
So, I really need to manually clean/uninstall these applications that appear to have become corrupted somewhere along the way.
That is the actual issue with the keyboard, it wont let you select it at all - if you read back through the post linked above it's not aimed at setting a default selection, it's to make it work at all!
I had the same issue, clicked on either and it would just stay on keyboard and so have many others. Installation of SIPchange sorted it. Maybe then you can rule out this being the problem for your system crashes?
Good luck
Software Keyboard (seems fast)
Try FingertouchPRO, the layout is customizable and so is the keyboard height, I was able to make this as big as fullscreen and also little as I liked.
The cab resides on www.fingertouchpro.com , just click the big CAB button.
There is a movie showing this toy in action, the speed (if it's real) is incredible!
Thought I move the thread to here to see if I will get more help:
Have had the phone for a few weeks and learning lots. All of sudden yesterday when trying to make a calendar entry, the full QWERTY, compact QWERTY, and phone pad can no longer be used to enter text. It's stuck on numeric mode. Tapping the "abc" key on the bottom of the full QWERTY keyboard doesn't change anything. Can still use transcriber and full keyboard for now. BUt when switched to Note program, all entry methods work. Have not installed any new programs lately (besides a few games and new calculator). Have been using S2U2 and Diamond tweaks to help with a few other problems...Help please since this is now my primary calendar and runs my life so need to have this working again!!
I"m using the GSM version with the latest ROM version. The problem also seems to be "periodic" in the sense that everytime I change mode of text entry to something else and back to QWERTY, it lets me enter text, but the moment I change it to numerics, I can't go back unless I change mode of entry again.....Argh.....
I suffer from a similar problem sometimes. Sometimes the keyboard doesn't open at all. I can't type anything. Perhaps it's because of TouchPal, dunno. Gotta reboot the device then ...
Sorry for abusing your thread, but it's a similar problem.7
Have you performed a soft-reset? Did it change anything or have you been suffering from the same problem ... ? Actually a stupid question
Done a soft reset once, and didn't change anything. Like I said it has a mind of its own...when I change the mode of text entry to full keyboard, everything works perfectly so I've been defaulting to that...then when I change from full keyboard to QWERTY, it would bring back the alphabet screen..but the moment I tap the 123 button to change to numeric pad to enter something, I CANNOT go back....I'm unwilling to hard reset for a problem that I have a "work around" on .....hence the post to see if others have similar problem, and HOW THE HECK did it happen???
ya i'm also facing the same problem, but now my COMPACT QWERTY keyboard stopped working completely, it was only taking no's, please suggest solution for this
Thanks in advance
same problem here. a complete reset to factory defaults was the only solution to that problem.
full querty worked normally, but without T9.
compact and phone pad numbers only, equal if i selected ABC or 123. Symbols worked normally