Related
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
ecomajor said:
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
Click to expand...
Click to collapse
do you have a G3 or G4?
What are your IPL/SPL?
Which other ROMs have you had installed on this wizard?
ecomajor said:
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
Click to expand...
Click to collapse
So, you start a new thread with the same problem you posted in another thread hoping to get an answer??
My answer to you is the same one I posted to you before --
READ THE STICKY ABOUT UNLOCKING AND FOLLOW IT STEP BY STEP!!
Then -- and ONLY then -- will you be able to flash to a custom ROM.
newbie2 said:
So, you start a new thread with the same problem you posted in another thread hoping to get an answer??
Click to expand...
Click to collapse
Yep, I've replied to ecomajor's various posts in various threads and have basically given up. Very little info each time and having a problem that nobody else that has followed the steps has had.
Sorry ecomajor, don't know what else to tell you that hasn't already been said numerous times.
One Last Try -- Then, I Give UP!!
Read the following post on how to flash ANY Wizard (yes, that includes the 8125) --
http://forum.xda-developers.com/showpost.php?p=1177659&postcount=1
Now, follow the directions in that post WORD FOR WORD and STEP BY STEP. The only reason it wouldn't work is that you're NOT READING and/or NOT FOLLOWING THE INSTRUCTIONS STEP BY STEP.
If you CAN'T read and follow directions, then don't be trying to flash different ROMs to your phone. If you're not willing to do what's necessary to help yourself, then noone else is willing to help you, either. . . especially when your problem has already been replied to with the same information over and over in 2 DIFFERENT THREADS now.
Let me detail you the exact steps I have taken. I have read through those posts, many times so I am certain I took those steps
1)device starts normally goto step 3.6 since unsure if unlocked.
2) read farias thread
3) download buttons rom
4)attempt to downgrade rom - failed
4a)tried 1.08 rom instead of button - failed
4b)tried wizard love- failed
5)download lokiwiz
6)followed all directions -failed - since was not able to downgrade rom.
Obviously these directions are not 100% foolproof - I know that the first time I tried installing WM6, I did not read through all the threads and after much effort I discovered that if I installed the official cingular 225 rom then I could get my ppc back working but since then I have had no luck getting flashing to work. Please tell me what I am doing wrong because noone has had my exact situation. there is no need to act all holier than thou and accuse me of not reading because since I screwed up the first time I have read through all these threads numerous times.
Ok, one more thing to try (shot in the dark, but I have no clue what is happening here)...
On your PC (its running XP, right???), do you have Firewall and/or Antivirus? If so, reboot your pc and don't start anything and then turn off your Antivirus and Firewall programs (I found a couple of threads where people were getting the error 260 when ZoneAlarm is active). Now try flashing the button rom. Don't try doing any other roms, don't try doing lokiwiz, just try to get the button rom on. If that works, then continue on with the steps here:
http://forum.xda-developers.com/showthread.php?t=285435
You might even try booting your computer into safemode and try flashing that way (I doubt activesync would be there, so put the phone in bootloader mode, and if you see USB above the left softkey then you should be able to flash it this way from safemode. Never tried it, but it pretty much eliminates anything that may be on your PC thats causing problems).
If none of that works, then get back to an official stock rom again and report back here with exactly what you did, what you saw, and all. Don't worry about the post being long, because to me, too much info is better than just short posts that don't tell us anything. Also, only update this thread. Forget all the other threads you have stuff going on about this problem.
Final question, I asked this before (and I don't remember if you answered or not)... Have you tried to flash your device from another PC?
And I've attached the ROM Update Utility Readme.doc that describes the error messages and how to fix them.
The weird thing is I never get code 260 with the cingular rom update just with the other roms. I will have to try the disabling all firewalls, antivirus etc at home bc at work there is all sorts of stuff i dont want to mess with. Problem if I do it in safemode is then the activesync driver wont be loaded and it will give me an error for that.
mfrazzz said:
Ok, one more thing to try (shot in the dark, but I have no clue what is happening here)...
On your PC (its running XP, right???), do you have Firewall and/or Antivirus? If so, reboot your pc and don't start anything and then turn off your Antivirus and Firewall programs (I found a couple of threads where people were getting the error 260 when ZoneAlarm is active). Now try flashing the button rom. Don't try doing any other roms, don't try doing lokiwiz, just try to get the button rom on. If that works, then continue on with the steps here:
http://forum.xda-developers.com/showthread.php?t=285435
You might even try booting your computer into safemode and try flashing that way (I doubt activesync would be there, so put the phone in bootloader mode, and if you see USB above the left softkey then you should be able to flash it this way from safemode. Never tried it, but it pretty much eliminates anything that may be on your PC thats causing problems).
If none of that works, then get back to an official stock rom again and report back here with exactly what you did, what you saw, and all. Don't worry about the post being long, because to me, too much info is better than just short posts that don't tell us anything. Also, only update this thread. Forget all the other threads you have stuff going on about this problem.
Final question, I asked this before (and I don't remember if you answered or not)... Have you tried to flash your device from another PC?
Click to expand...
Click to collapse
ecomajor said:
The weird thing is I never get code 260 with the cingular rom update just with the other roms. I will have to try the disabling all firewalls, antivirus etc at home bc at work there is all sorts of stuff i dont want to mess with. Problem if I do it in safemode is then the activesync driver wont be loaded and it will give me an error for that.
Click to expand...
Click to collapse
I've never tried it in safemode so I don't know if that will work or not, it was just an idea as we are grasping at straws here. But if you boot to safemode, and with the phone at the bootloader screen (hold down the camera button while you turn it on to get to the "rainbow" bootloader screen), if it shows USB above the left softkey then the computer and phone are communicating and Activesync does not matter. BTW:You can try the safemode way there at work as you will have no network connectivity in safemode so you don't have to worry about violating security policies.
You still have not answered my one question directly... Have you tried flashing the button rom to your phone on multiple computers? Or have you always done it from the same PC? And are the PC(s) that you are using running Windows XP?
What DOC chip does your device have? G3 or G4?
If you have a G4 then i guess you ruined your bootloader since G4 devices don't have and don't accept 1.xx IPL versions!!
I have tried button from multiple pcs. This time it gets up to 98% on button and then dies and it gives error 302 - update error for the button. This is a problem that I was having before.
Did you read the document I posted?? If you're getting Update Error 302, you're not going to be able to recover with anything other than the stock Cingular ROM.
Chances are that you did indeed ruin the bootloader when you tried using the ShellTool to flash a G3 phone. And I doubt seriously that you'll be able to do a warranty exchange if you can run the stock ROM successfully, so I'm afraid you're stuck now with the stock-shipped ROM.
So you are saying there is no way to fix the bootloader (like flashing it or soething) I was figuring I had screwed something up. I actually had read the document before but thanks for your help. Why is it that you can fix many other issues with the 8125 but not the bootloader?
I'm not saying it CAN'T be done. What I AM saying is that in the year I've been registered and active here, I've not seen any posts/threads about recovering from a bad bootloader. But that doesn't mean that there ISN'T a way to do it.
You might want to do a search of the Wizard section for bootloader error or recovering bootloader to see what might come up.
Good Luck!!
I am new to completely flashing a custom ROM. I've been trying to flash a new ROM on my tilt, with the latest AT&T updates(ROM 1.62.502.0 Radio 1.27.14.09). Each time I try to flash a custom ROM I get Error 262 Update Error. The progress bar never gets past 0%. I've tried multiple PCs and tried reinstalling ActiveSync. Am I missing something, or do I have to do something first before being able to flash the new ROM?
Any help is greatly appreciated!
Steve
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
I am about 100% sure you searched, didn't you?
Here, baby boy, let me spoon feed you and you can ask your mommy if she can whipe your drool:
http://www.digwin.com/view/schaps-wm6-pro-roms-update-error-262
bapssystupr3m3 said:
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
Click to expand...
Click to collapse
I have searched the forums over the past week or so. The solutions suggested such as soft reset, hard reset, reinstall activesync, switch USB ports, etc have not done anything. I also came across this thread:
http://forum.xda-developers.com/showthread.php?t=370205
which would suggest that I there is an incompatibility. I was hoping someone could point me in the direction of which radio version etc I would need to update to in order to update to a WM 6.1 ROM.
edit:yes I have run CID unlock.
Steve
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
_Alex_ said:
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
Click to expand...
Click to collapse
Thanks Alex! Tri-Color mode worked!
Steve
My error 262 fixed
I don't know if this is the best place to put this, but I didn't want to open a new thread.
I too had been getting repeated error 262. And I spent a couple of hours searching for answers, and while there have been many questions raised on this subject, there have been few clear solutions (and certainly none that worked for me).
I have the HTC branded Kaiser installing from Vista. (By the way I am new to this, but as I had such a hard time working this out, I thought I should at least post what worked for me.) I unlocked the CID with pof's Hard-spl v1 tool. Then (as I want to stay with Mobile 6.1) I upgraded the hard spl to v3.28 by JockyW. I then downloaded a number of Roms I wanted to try. That is where the trouble started.
Each ROM I tried would get past the tri-color screen with no problem. Then it would hang at the 0% until finally showing the error 262. A soft reset would reload my previous rom unchanged. I tried many things: removing all USB's, firewall, virus protection, hard reset, reboot windows, every suggestion I could find (and understand).
While the hard spl I had should have worked, I thought I should try version 3.29. When trying to upgrade to that I had a similar problem with error 260 this time. Looking over spl update instructions I realized I had forgotten to uncheck "disable usb connections" in "Activesync" at the proper stage. Once that was unchecked, the new spl loaded. After that I was able to load the cooked roms with no problem.
It appears there was something wrong with the HardSPL v3.28 I was using or in how I installed it. The tricolor screen was showing 3.28. In any case, after I reinstalled a new hard spl (this time 3.29), I had no more error 262.
A bit long-winded, but hopefully this might help someone else.
hi there i want to unlock my phone so it can use different operater sims and im stuck on what to do. ive got written instructions and it says i need spl "spl-1.0 olipof" im just not sure how i get it onto my phone my current spl version is 1.81.0000
ive got kaiser unlocker.zip just not sure what next
First off, I don't think you used the search. And second. The wiki is filled with alot of the information that you are looking for. So before posting, do check the Wiki about your phone. Check under software in the link below. It will tell you how to both HardSPL and Unlock your phone.
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
of course i searched. ive been here a while, i know theres a lot of sad people who like to have ago if you dont. ive already been flamed.
secondly i went to the wiki page because i kno theres people who hate it when you dont. i searched down and came across the kaiser sim unlocker the prblems i am having is with radio confusion and hard spl compatability clarification. i have the sim unlocker and written instructions on how to use it
the problems i am having is my confusion over what type of hard spl to use and i cant locate the correct radio for my rom to reflash after ive finished with the patched radio thats provided with the radio
all i was asking for was help.
(holy **** george carlins dead. that wasnt on uk news
f*^&ing bbc)
hmm, I was able to unlock my tilt easily
jayjay8585 said:
of course i searched. ive been here a while, i know theres a lot of sad people who like to have ago if you dont. ive already been flamed.
secondly i went to the wiki page because i kno theres people who hate it when you dont. i searched down and came across the kaiser sim unlocker the prblems i am having is with radio confusion and hard spl compatability clarification. i have the sim unlocker and written instructions on how to use it
the problems i am having is my confusion over what type of hard spl to use and i cant locate the correct radio for my rom to reflash after ive finished with the patched radio thats provided with the radio
all i was asking for was help.
Click to expand...
Click to collapse
which radio are you currently using?
jayjay8585 said:
of course i searched. ive been here a while, i know theres a lot of sad people who like to have ago if you dont. ive already been flamed.
secondly i went to the wiki page because i kno theres people who hate it when you dont. i searched down and came across the kaiser sim unlocker the prblems i am having is with radio confusion and hard spl compatability clarification. i have the sim unlocker and written instructions on how to use it
the problems i am having is my confusion over what type of hard spl to use and i cant locate the correct radio for my rom to reflash after ive finished with the patched radio thats provided with the radio
all i was asking for was help.
(holy **** george carlins dead. that wasnt on uk news
f*^&ing bbc)
Click to expand...
Click to collapse
Aha! By saying that you can't find the correct radio for your ROM, would I be right in saying that you are currently using 1.27.12.29?
If so then don't panic - it's not available to download, but when you need to flash back your radio as part of the unlock procedure you can use 1.27.12.32 instead.
For basic unlocking you can use HardSPL v1 from this thread: http://forum.xda-developers.com/showthread.php?t=334679 (as the unlock procedure assumes that this is the SPL you are using it's probably best to use this one rather than the later v3.xx versions (don't worry, you can flash them later)
So, in the following order:
1. Flash HardSPL v1 (once this is done go in to the bootloader to make sure it says "SPL-1.0 OliPof")
2. Run the unlock procedure
3. Start flashing ROMS, but be warned - it can become addictive!
Good luck.
im using rom 1.81.61.2 wwe
radio 1.27.14.32
and now im having trrouble with spl
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
USPL and HSPL do this for you so you are able to flash a rom or radio. Read this page from wiki. It'll help you understand
Follow cRaCKwHoRe's guide on how to flash (can be found in my signature). If you intend to do a lot of flashing I'd flash HSPL as its permanent whilst USPL is temporary and you'd need to re-use it before every flash to new rom or radio
Latest HSPL can also be found in my signature
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
futurama said:
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
Click to expand...
Click to collapse
Flashing from one HTC stock rom to another you don't need to use USPL or HSPL. But going to a cooked rom you do.
Answer to your query is it depends on route you take. If you go down the USPL route you'll need to follow cRaCKwHoRe's guide. Would take to long to explain and he as already done a very good tutorial on the subject. If you go down HSPL route, all you need to do is flash latest HSPL then 1.56 rom
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
futurama said:
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
Click to expand...
Click to collapse
I'm currently testing Dutty's V3.4. His V3.3 is already released but I'd wait for the new release hopefully in a few days. Both are based on WM6.1. Alternatively their is so many good roms out there. I'd also recommend Davideuck, EnergyROM & L26_THDV2.2 (Laurentius26). All very good roms by very good cooks. Best thing would be to try each of them and make your own opinion
thanks again mate, you are a legend, Ill post tonight to let you know how it went.
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM?
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
davemazo said:
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
Click to expand...
Click to collapse
There are a few forms of unlocking but the bottom line is that you need to bypass the checking which is done in the flash process.
One way is permanat as done once no issues anymore - HSPL
Another is as and when you need - USPL.
Wiki has a walk through that needs to be upated but I thought still was useable.
Flash the new 1.56 shipped rom and then move on to cooked roms. (will help you by pass the greenscreen issue)
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
futurama said:
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
Click to expand...
Click to collapse
Sorry to hijack your thread futurama but I am having the same problem. Could you let me know how you did it
Thanks HDuser. Not sure if you know where I`m up to but originally I flashed my Orange 1.19.61.1 ROM with USPL and then flashed Duttys 2.7 1.56 based ROM which has given me the green screen problem. An earlier poster suggested I flash Olinex HSPL 1.54 to cure the problem. The problem I am having now is the phone refuses to sync with the PC. I have tried Vista and XP, the PC does not hibernate or sleep or anything, the phone is set to not switch off. It will usually sync on first connection but after a few seconds it will disconnect and therefore HSPL is reporting as being disconnected.
I have tried the earlier HSPL and HSPL 1.56 (as the ROM in bootloader screen is reported as being 1.56 and SPL is 1.14). I feel I`m going round in circles and its only a matter of time before I brick the phone.
I have read and re-read the wikis but I am now just getting more and more confused.
davemazo
Look the best way to approach any problem is to go back to the roots.
Flash a stock rom, find your own stock rom and refalsh it, then take it from there.
Your post is missleading and I have no idea were to sart. One issue is your PC ist does not Hibanate, not or go into sleep mode, at the saem time you are saying that you can't sync. Sounds like you have other problems and those other problems are making you have problems with your device.
Thanks HDuser. Sorry for confusing you, but I am now totally confused myself, Basically though the phone does not sync with the PC, I have tried 2 PC`s, with Vista and XP.
But back to your point about flashing stock ROM, I have tried a link in the wiki to download the one I need which is Orange 1.19.61.1 but the link seems to be broken and I don`t know where else I can get it. It doesn`t seem to be on the Orange website or HTC.
HDuser said:
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
Click to expand...
Click to collapse
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
futurama said:
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
Click to expand...
Click to collapse
It sounds as if you have it sorted now and everything working. As HDUser stated previously HSPL & USPL allows you to bypass the CID lock to enable you to flash new roms
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
futurama said:
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
Click to expand...
Click to collapse
Of course you can. All information you need including original stock radio's, roms etc are available in wiki to download.
Greetings to all..Well to go straight to the point.I bought the htc unlocker from olipro some few hours ago and having some serious issues with the software.Well in the process of flashing the rom the the display colour changed and it has not been well ever since..I tried flashing again and it tells a hard spl has already been detected so i couldn't re-do the whole thing again.I tried unlocking the radio and it tells me I am in a flight mode which I am not or the i have to purchase an IMEI..I am seriously confused as to what to do next since my phone(htc touch hd) screen display looks like a real mess.I know i may have done something wrong somewhere.So i want to guys to help me fix this.Below are some additional info of the phone.
Rom Version: 1.19.61.1 WWE
Radio Version: 1.09.25.14
Model No: HTC Touch HD T8282
Best Regards and Thx in advance
niixxl said:
Greetings to all..Well to go straight to the point.I bought the htc unlocker from olipro some few hours ago and having some serious issues with the software.Well in the process of flashing the rom the the display colour changed and it has not been well ever since..I tried flashing again and it tells a hard spl has already been detected so i couldn't re-do the whole thing again.I tried unlocking the radio and it tells me I am in a flight mode which I am not or the i have to purchase an IMEI..I am seriously confused as to what to do next since my phone(htc touch hd) screen display looks like a real mess.I know i may have done something wrong somewhere.So i want to guys to help me fix this.Below are some additional info of the phone.
Rom Version: 1.19.61.1 WWE
Radio Version: 1.09.25.14
Model No: HTC Touch HD T8282
Best Regards and Thx in advance
Click to expand...
Click to collapse
The unlocker is used to unlock a sim, and is not what is needed to flash a rom. You need to read this - http://forum.xda-developers.com/showthread.php?t=505377.
When your phone is in the bootloader (tri-colour mode)what spl is showing? All the symptoms you describe are indicative of having the wrong spl for the rom you have flashed. As this thread will be closed down soon, please post any further questions in the thread linked above.
Well the thing is..am trying to unlock my htc touch hd which is orange uk branded.so i saw olipro's thread on how to unlock it..thts all..
Well the display is just wrecked like when u have a bad vga on pc..
DO u have any ideas as to wht is happening and if i have used the wrong software,how to i revert to the factory settings and get my display back?
any ideas on how to unlock my phone..
http://forum.xda-developers.com/showthread.php?t=505377
Dummys guide to flashing a rom.
You should get a mod to remove the references to the IMEI number you posted. It's not wise to put this number in a public place.
niixxl said:
Well the thing is..am trying to unlock my htc touch hd which is orange uk branded.so i saw olipro's thread on how to unlock it..thts all..
Well the display is just wrecked like when u have a bad vga on pc..
DO u have any ideas as to wht is happening and if i have used the wrong software,how to i revert to the factory settings and get my display back?
any ideas on how to unlock my phone..
Click to expand...
Click to collapse
I haven't unlocked my phone before, so I'm not sure exactly what the unlocker does. If you didn't change the rom, then the unlocker must somehow have changed the spl version and hence the bad colours. Not to worry, it can be fixed. As this thread is likely to be closed soon, please take the discussion further in the thread that I (and alexpetrucci) linked to above.
could the mod pls do me a favour and delete my imei from the first posr pls?...
niixxl said:
could the mod pls do me a favour and delete my imei from the first posr pls?...
Click to expand...
Click to collapse
You can, just click Edit and then delete it
First off, if you are using Olipro's unlocker and having difficulty...why not post in his thread??
Secondly, where do we currently stand? Have you followed the dummies guide? What is your current SPL?
Any further flashing queries should be posted in dummies guide thread