need help unlocking a orange uk tytn 2 (searched) - Tilt, TyTN II, MDA Vario III General

hi there i want to unlock my phone so it can use different operater sims and im stuck on what to do. ive got written instructions and it says i need spl "spl-1.0 olipof" im just not sure how i get it onto my phone my current spl version is 1.81.0000
ive got kaiser unlocker.zip just not sure what next

First off, I don't think you used the search. And second. The wiki is filled with alot of the information that you are looking for. So before posting, do check the Wiki about your phone. Check under software in the link below. It will tell you how to both HardSPL and Unlock your phone.
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser

of course i searched. ive been here a while, i know theres a lot of sad people who like to have ago if you dont. ive already been flamed.
secondly i went to the wiki page because i kno theres people who hate it when you dont. i searched down and came across the kaiser sim unlocker the prblems i am having is with radio confusion and hard spl compatability clarification. i have the sim unlocker and written instructions on how to use it
the problems i am having is my confusion over what type of hard spl to use and i cant locate the correct radio for my rom to reflash after ive finished with the patched radio thats provided with the radio
all i was asking for was help.
(holy **** george carlins dead. that wasnt on uk news
f*^&ing bbc)

hmm, I was able to unlock my tilt easily

jayjay8585 said:
of course i searched. ive been here a while, i know theres a lot of sad people who like to have ago if you dont. ive already been flamed.
secondly i went to the wiki page because i kno theres people who hate it when you dont. i searched down and came across the kaiser sim unlocker the prblems i am having is with radio confusion and hard spl compatability clarification. i have the sim unlocker and written instructions on how to use it
the problems i am having is my confusion over what type of hard spl to use and i cant locate the correct radio for my rom to reflash after ive finished with the patched radio thats provided with the radio
all i was asking for was help.
Click to expand...
Click to collapse
which radio are you currently using?

jayjay8585 said:
of course i searched. ive been here a while, i know theres a lot of sad people who like to have ago if you dont. ive already been flamed.
secondly i went to the wiki page because i kno theres people who hate it when you dont. i searched down and came across the kaiser sim unlocker the prblems i am having is with radio confusion and hard spl compatability clarification. i have the sim unlocker and written instructions on how to use it
the problems i am having is my confusion over what type of hard spl to use and i cant locate the correct radio for my rom to reflash after ive finished with the patched radio thats provided with the radio
all i was asking for was help.
(holy **** george carlins dead. that wasnt on uk news
f*^&ing bbc)
Click to expand...
Click to collapse
Aha! By saying that you can't find the correct radio for your ROM, would I be right in saying that you are currently using 1.27.12.29?
If so then don't panic - it's not available to download, but when you need to flash back your radio as part of the unlock procedure you can use 1.27.12.32 instead.
For basic unlocking you can use HardSPL v1 from this thread: http://forum.xda-developers.com/showthread.php?t=334679 (as the unlock procedure assumes that this is the SPL you are using it's probably best to use this one rather than the later v3.xx versions (don't worry, you can flash them later)
So, in the following order:
1. Flash HardSPL v1 (once this is done go in to the bootloader to make sure it says "SPL-1.0 OliPof")
2. Run the unlock procedure
3. Start flashing ROMS, but be warned - it can become addictive!
Good luck.

im using rom 1.81.61.2 wwe
radio 1.27.14.32

and now im having trrouble with spl

Related

Can somone please, going to cry in several seconds

my wizard is stuck at the ipl spl screen, i just tried to throm farias new rom on it even though it is cid locked (i used shelltool)
now this happened
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
i dont even know how to enter bootloader mode, i searched the forums but its so hard to find things, im serious, it's a problem ive had before, any help and i would love you
jawnsixteen said:
my wizard is stuck at the ipl spl screen, i just tried to throm farias new rom on it even though it is cid locked (i used shelltool)
now this happened
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
i dont even know how to enter bootloader mode, i searched the forums but its so hard to find things, im serious, it's a problem ive had before, any help and i would love you
Click to expand...
Click to collapse
reset and hold the camera button,you will see a 3 color screen...connect to the PC it should say usb in the bottom of the device screen....now install the latest update from your carrier.
PS
for future reference if you device is ended CID unlocked you do not need to use shelltools...just use the update utility provided by the rom.
also this info has been posted 1 trilion times
..........
Its not that hard to look at the stickies (thats were the really important stuff is located).
Here's a great post for you to use:
http://forum.xda-developers.com/showthread.php?t=298613
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and it got stuck at 99%, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the sheeltool thread and see if they can help me, i still can't get that to work.
thanks again
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and when i powered on it wasn't your rom it was the one i had on it before with some things different, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the shelltool thread and see if they can help me, i still can't get that to work.
thanks again
jawnsixteen said:
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and it got stuck at 99%, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the sheeltool thread and see if they can help me, i still can't get that to work.
thanks again
Click to expand...
Click to collapse
A really useful thread (besides the WIKI is: http://forum.xda-developers.com/showthread.php?t=298613 it, by the way, is the very first item on the WM6 forum, this forum has Dr. P's EXCELLENT thread http://forum.xda-developers.com/showthread.php?t=285435 plus other useful stickies) It seems that your phone is 'working' after flashing the TMo 2.26, the first thing you need to do is find out if you have a G3 or a G4, then CID unlock appropriately. Skip the shelltool stuff for now, if you don't understand what phone you have, you will be on the road to "brick city".
--M
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
jawnsixteen said:
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
Click to expand...
Click to collapse
CID unlocking (as far as I know) won't void your warrantee--at least it hasn't voided mine (TMo US), but YMMV. That said, it isn't a bad thing to ask for help, (cross posting is generally frowned on) we like to help people who aren't lazy or stupid.
When you do post for help, generally the more info provided the better, but I sense you know that. If your phone is a G3, I am not really sure why you are seeking help in the G4 forum....anyway.
IMHO, Faria's WM6 works really well, and I haven't had serious issues with it. There are others that love different ROMs or will cook their own, great! Nottoosmart has a good looking ROM (a Mun derivative ROM) everyone will have an opinion, I know what works well for me. So "what is the best"? Hmm Faria's WM6 (for me).
--Mark
jawnsixteen said:
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
Click to expand...
Click to collapse
While keeping your phone CID Locked does keep you from voiding your warranty in that respect, flashing a custom rom on your phone will technically void your warranty also (although unless do something nasty to it, you should be able to get it back to the official rom and with it still CID locked then you should be fine). Example: You flash the latest and greatest WM6 on your phone and then your USB connector breaks and your SD slot doesn't work. You now can't get back to WM5 so they will know if they look. Far fetched, but I'm just throwing it out that if you are really concerned about your warranty, flashing custom roms may not be a good thing. Don't get me wrong, I'm not trying to tell you not to do it, I'm just saying that doing pretty much anything in the upgrading and WM6 forums here is basically voiding your warranty. But I think in most cases, the carriers don't look that close.
And please ask for assistance when you have issues. There are so many posts though, its hard to tell who has really read and who hasn't sometimes. Just remember that the stickies at the top of the forums are your friends and there is really good info there to help you get unstuck (most of the time).
i love you guys

How do I flash a different ROM while on WM6?

I just got my new Cingular 8125/Wizard last week from my friend and found out about XDA developers and was intrigued with what I can do with my new device. I figured out how to flash the new WM6 onto my phone to replace the laggy WM5. Now that I have had this ROM for long enough, I'd like to change to a new ROM that I've found. Also, this new ROM is a different version of WM6. I don't know if I'm supposed to downgrade first or just start loading a new ROM on? If I am supposed to downgrade, how do I do it and what is the best program to use. Thanks in advance,
Brock
Start in the Wizard wiki (check link on top of page) where you'll find a lot of info to help you know your device; there are two generations of them. You can also get my tool - WST (check my signature) which will also help you.
Also pay attention to the stickies as they have valuable guides
good luck and welcome
mestrini said:
Start in the Wizard wiki (check link on top of page) where you'll find a lot of info to help you know your device; there are two generations of them. You can also get my tool - WST (check my signature) which will also help you.
Also pay attention to the stickies as they have valuable guides
good luck and welcome
Click to expand...
Click to collapse
Thank you. I have a G4 Wizard by the way. I looked through a lot of forums and through the Wizard Wiki and couldn't find how to flash a new ROM after on WM6, only on how to flash from the original WM5. I looked at WST and I'm a little confused. I'm not sure what it is or how to use it? Also, my phone is CDI unlocked. Also, what is the program WizardLove and what does it do? I see all the talk about it and I don't understand it.
No. You don't understand (or you didn't look carefully).
G4 Wizard CANNOT be CID unlocked with free software.
Head to the G4 subforum and look the stickies carefully,
First flash with your original carrier ROM, then use either SoftSPL or HardSPL to flash another version of WM6.
starkwong said:
No. You don't understand (or you didn't look carefully).
G4 Wizard CANNOT be CID unlocked with free software.
Head to the G4 subforum and look the stickies carefully,
First flash with your original carrier ROM, then use either SoftSPL or HardSPL to flash another version of WM6.
Click to expand...
Click to collapse
Ok what I meant is I flashed the HardSPL onto my G4. I'm on Cingular so what exactly is my original carrier rom and where do I find it? I already used HardSPL, do I need to do it again? Thanks again for everyones help. After I get this once, I won't have any more trouble
bropark08 said:
Ok what I meant is I flashed the HardSPL onto my G4. I'm on Cingular so what exactly is my original carrier rom and where do I find it? I already used HardSPL, do I need to do it again? Thanks again for everyones help. After I get this once, I won't have any more trouble
Click to expand...
Click to collapse
Ahh, you should have started by saying that you already knew what device you have and that already applied the HardSPL patch
Now, as long as you flash "G4 safe" ROMs (without IPL/SPL), you can try as many as you'd like. If you had used SoftSPL that would require to do it everytime you flashed a new ROM
cheers

hardspl is: SPL-1.56.0000 (HOW TO ULOCK?)

All,
I am ready to unlock my Kaiser (TyTnII) but my spl version is : SPL-1.56.0000
How do I get this to *.OliPof??
Alf
HardSPL. That's a very basic question and tells me you haven't read much. Read the wiki completely and all the stickies (at the very least). As a noob, I also spent a few days reading the site before I did anything. If you don't know what you're doing, you can brick your device. Good luck.
I did read a lot, And here is what I have found so far:
HardSPL v6, sets the SPL to *.olipro, My version is *.0000
As far as I can figure out, it is not about Hard SPL, cause this is the Startup bi the bootlaoder, whith which you can flach the rom version to a different version.
Now my question was: how do I updat this, but I already found it, exept the link does not work (tool name is: RUUWrapper.exe)
did I mis anything or did not understand this?
Alf
http://forum.xda-developers.com/showthread.php?t=334679
Guilf,
I do know what I was doing, the link you gave me, is the right link (and the only link I found to the Kaiser update, the rest is hermes, and that will not work.) I updated the BootLoader, and followed the rest of the steps, and now..... I am the happy onwner of an UNLOCKED TyTnII
Thanks!!
(and I will donate ofcourse!)
Alf (Whizzy)
No problem. Didn't mean to seem as if you hadn't read. Glad it worked out. Have fun flashing. Too many good cooks for one PPC. It's addictive!
LOL,
and thanks

Should I get a TyTn?

Morning all
I have been offered a swap for my iPhone for a brand new boxed Orange TyTn II and Im just wondering if its worth doing?
I have had previous windows mobile phones and do like the phones so I am considering the trade, I am currently on o2.
The thing is i have read all the posts about unlocking and flashing roms etc and im a little on edge about doing it myself as im sure i will break it lol
I would basically need to sim unlock the phone and remove all the orange software as I think it looks naff!
How much work is envolved in doing what i need and how long would it take?
Sorry if im repeating a post, im not the best at forums and get lost with all this info you guys have!
Cheers
Sy
Absolutely YES!!!
There is no contest. The TyTN II wins hands down!!!
Leave well enough alone. Perhaps get a sim unlocker. Just do a search and you should find something. But don't play around with flashing roms etc. You may regret it.
Use the HTC original apps which you will find on a sticky at the beginning of this forum.
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
I'm wondering if i should get a TyTn 2 now or wait for a Xperia.
Checked out the TyTn at a store a couple of days ago and i loved it, the only thing i didnt like was that it doesnt have a radio. Then i read around in this forum and came across the driver problems and the touchscreen bug and due to them i'm more inclined to wait for Xperia, but then i checked out Xperia's design and i didnt like the way the keyboard slides to, makes you operate the joystick with the right hand instead of the left and that's kind of uncomfortable.
seriously, who uses radio? I stream my Sirius satalite radio..
Sirius Pwnz AM/FM
..........
Audio said:
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
Click to expand...
Click to collapse
dont you need to CID unlock it first? what is this hardspl and what does it do?
jonneymendoza said:
dont you need to CID unlock it first? what is this hardspl and what does it do?
Click to expand...
Click to collapse
Yes you MUST CID unlock as well (unless it has already been done, which is doubtful if it is on Orange).
My advice...Before even getting the TYTN II, read the sticky's and Wikis in the upgrading ROM section at least 3 times over to ensure you have an idea of what you are going to need to do before even doing anything. when you think you understand it, read them again.
Then go ahead and flash any ROM you fancy and enjoy the benfits of the TYTN II voer the Iphone.
HardSPL is the replacement bootloader that allows you to install an non original ROM.
Im on T mobile and i hav heard that the ROM is not heavily branded. im just worried about bricking it. i already have the MDA viara 3.
reading this thread http://forum.xda-developers.com/showthread.php?t=334679 doing hardspl, does that automaticly unlock the CID or is there another tool to do that? if so do CID unlock it first and then hardspl?
You will NEED to CID unlock AND HardSPL...Do not consider doing anything untill you are 100% certain of the steps you are performing and why, otherwise you will have a rather expensive paperweight.
EVERYTHING you need to know and more about Rom flashing is contained here
http://forum.xda-developers.com/showthread.php?t=369282
Seriously, ensure you read every link and sub link related to ROM flashing. Even make sure you read the "inspirational reading" bit, that will give you the confidence to try it.
As long as you read you will be fine.
When I was new here I spent 4 days solid reading reading and reading before biting the bullet and flashing my first ROM. At
Thanks for the advice. one small question. if i was to follow this guide : http://forum.xda-developers.com/showpost.php?p=1790046&postcount=3 word for word i should be succesful?
there is one question i am still confused about and thats this hardspl/cid unlock. according to the Thread i linked, all i got to do is follow the guide from HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) and bam im ready to Flash the ROM?
also what are the major benefits of flashing to a custom ROM?
does the procedure from that last link above hardspl AND CID at the same time?
hi i managed to hardspl my device succesfuly. so im ready to install a new cooked ROM? what are the best ROMS out there that i can try. i have seen dutty's ROM that many have used and was wondering if thats the best one
Does the DUTTY rom improve the camera and video playback?

What exactly is hardSPL? USPL vs hardSPL

I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Essentially what you are doing is changing the Bootloader so you can install a different ROM regardless if it's signed.
USPL and HardSPL is a matter of having it done temporarely or permenantly.
USPL (temporary), is the safe route. This will allow you to Install one USPL capable ROMs per USPL. So if you're not a big flasher, and thinking about selling your phone in the near future, then you might want to stick to this method.
HardSPL (permenant), is the only TRUE way of bricking your phone. You will flash the bootloader for good so that you can constantly flash new ROMs without having to worry about flashing your bootloader of making sure it's a signed ROM. For heavy flashers, like myself, this is the ideal route.
HardSPL is reversible, there are some threads on how to do that. If I remember correctly, you have to flash back to a Stock T-Mo ROM.
Some ROMs require HardSPL because sometimes the cooks use different methods to flash ROMs onto devices other than ActiveSync (which is needed for flashing via USPL).
For example, ttran001's Open Touch V4.0 Micro ROM flashes onto your device using your SDCard, the phone is never connected to you PC so no opertunity to USPL. If it was not HardSPL'd, the ROM would be rejected. If it was, the flash would continue flawlessly.
I hope this answers your questions, and please, if I got anything wrong, correct me.
Regards,
three4seven said:
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Oh and from what I understand, installing those cabs wont hurt your device if you dont HardSPL. I believe you can uninstall them from the "remove program" which can be found under Settings/System/Remove Programs.
Everyone's allowed a Noob question every now and then I only know all this info because I read, so im sure if you read u'll be just fine.
nKiwan, thanks for quick and throrough reply
I get a little lost with this:
nKiwan said:
This will allow you to Install one USPL capable ROMs per USPL.
Click to expand...
Click to collapse
what does that mean exactly?
perhaps I should start by asking the USPL acronym stands for - I've googled it and I couldn't find the right acronym.
From my understanding.. the only real difference (besides one uspl rom per uspl vs infinite - i'm still a little hazy on that) is that hardSPL allows for flashing outside of activesync?
thanks again... I swear I tried my best using the search function and reading
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device. This will temporarely change your bootloader so it will allow you to flash a non signed ROM, a.k.a. an "outside" ROM. USPL capable ROMs, are ROMs that you can flash using USPL, therefore, ActiveSync.
Well there are two differences I guess... HardSPL, basically, allows for flashing outside of ActiveSync; and will allow you to flash any ROM as many times as you would like, once HardSPL'd.
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
nKiwan said:
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device.
hardSPL.... will allow you to flash any ROM as many times as you would like, once HardSPL'd.
Click to expand...
Click to collapse
Technically then.. I could also flash any rom as many times as I want using USPL as long as I run USPL.exe? I read the flashing guide several times. The only difference I found was that you run USPL.exe and it goes through a loader instead of just running the RUU flaser. Is that right?
i apologize once again if I am being incredibly dense.
thanks again for putting up with my n00bness
there ya go! you got it. As you become more experienced you'll start to understand the need of HardSPL.
I was once a noob myself, so i understand where u coming from . Just glad I can help.
Regards,
nkiwan - thank you so much for answering my barrage of n00b questions.
You have been a great help. I really appreciate it.
Wow I think this is the coolest thread I have read ...it is just awesome what the WWW has done for all of us and thanks for the info
Glad I can help
I can understnad the use of USPL but I would recommend the use of hard SPL if you are planning to flash multiple roms. Either way I think it is just a matter of whether or not you actually want to run the USPL everytime you want to flash a rom... Don't quote me on that.
Just to doublecheck myself....
If I use USPL method and hard reset my phone - will I have the stock rom or the flashed one?
if I understand correctly USPL will bring back the stock one after hard reset and HSPL the new one.
very sorry to ask this now..from what i get is there are 3 ways of turning ur phone from phone to super phone:
1. install .cabs
2.soft flashing
3.hard flashing???
am i rite??
nKiwan said:
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
Click to expand...
Click to collapse
I found this thread that you might find useful for the acronyms:xdasite.com/showthread.php?t=1104
Same was with me.....
three4seven said:
I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Hi Brother,
Same problem with me i have also search every where but failed... no answer about Hard spl.Every body say do hard spl and search in fourm and so on. There was no proper guide what it is and how to do. i was really puzzel. Now i have come to know that axect what it is Hard Spl.
Hard Spl mean CID unlock. If you unlock CId of the phone its mean you have done Hard SPl. Without CID unlock you can not write ROM.
Thanks
Br Raja
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Stargazer418 said:
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Click to expand...
Click to collapse
You can always check in the bootloader screen (the RGB screen).
Even if you have a 4.70.Yang you still need the IPL to be higher than 4 to flash custom ROMs. That is what is important.
If you ever see any of these number's change, Run the HardSPL folder again.

Categories

Resources