my wizard is stuck at the ipl spl screen, i just tried to throm farias new rom on it even though it is cid locked (i used shelltool)
now this happened
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
i dont even know how to enter bootloader mode, i searched the forums but its so hard to find things, im serious, it's a problem ive had before, any help and i would love you
jawnsixteen said:
my wizard is stuck at the ipl spl screen, i just tried to throm farias new rom on it even though it is cid locked (i used shelltool)
now this happened
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
i dont even know how to enter bootloader mode, i searched the forums but its so hard to find things, im serious, it's a problem ive had before, any help and i would love you
Click to expand...
Click to collapse
reset and hold the camera button,you will see a 3 color screen...connect to the PC it should say usb in the bottom of the device screen....now install the latest update from your carrier.
PS
for future reference if you device is ended CID unlocked you do not need to use shelltools...just use the update utility provided by the rom.
also this info has been posted 1 trilion times
..........
Its not that hard to look at the stickies (thats were the really important stuff is located).
Here's a great post for you to use:
http://forum.xda-developers.com/showthread.php?t=298613
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and it got stuck at 99%, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the sheeltool thread and see if they can help me, i still can't get that to work.
thanks again
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and when i powered on it wasn't your rom it was the one i had on it before with some things different, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the shelltool thread and see if they can help me, i still can't get that to work.
thanks again
jawnsixteen said:
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and it got stuck at 99%, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the sheeltool thread and see if they can help me, i still can't get that to work.
thanks again
Click to expand...
Click to collapse
A really useful thread (besides the WIKI is: http://forum.xda-developers.com/showthread.php?t=298613 it, by the way, is the very first item on the WM6 forum, this forum has Dr. P's EXCELLENT thread http://forum.xda-developers.com/showthread.php?t=285435 plus other useful stickies) It seems that your phone is 'working' after flashing the TMo 2.26, the first thing you need to do is find out if you have a G3 or a G4, then CID unlock appropriately. Skip the shelltool stuff for now, if you don't understand what phone you have, you will be on the road to "brick city".
--M
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
jawnsixteen said:
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
Click to expand...
Click to collapse
CID unlocking (as far as I know) won't void your warrantee--at least it hasn't voided mine (TMo US), but YMMV. That said, it isn't a bad thing to ask for help, (cross posting is generally frowned on) we like to help people who aren't lazy or stupid.
When you do post for help, generally the more info provided the better, but I sense you know that. If your phone is a G3, I am not really sure why you are seeking help in the G4 forum....anyway.
IMHO, Faria's WM6 works really well, and I haven't had serious issues with it. There are others that love different ROMs or will cook their own, great! Nottoosmart has a good looking ROM (a Mun derivative ROM) everyone will have an opinion, I know what works well for me. So "what is the best"? Hmm Faria's WM6 (for me).
--Mark
jawnsixteen said:
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
Click to expand...
Click to collapse
While keeping your phone CID Locked does keep you from voiding your warranty in that respect, flashing a custom rom on your phone will technically void your warranty also (although unless do something nasty to it, you should be able to get it back to the official rom and with it still CID locked then you should be fine). Example: You flash the latest and greatest WM6 on your phone and then your USB connector breaks and your SD slot doesn't work. You now can't get back to WM5 so they will know if they look. Far fetched, but I'm just throwing it out that if you are really concerned about your warranty, flashing custom roms may not be a good thing. Don't get me wrong, I'm not trying to tell you not to do it, I'm just saying that doing pretty much anything in the upgrading and WM6 forums here is basically voiding your warranty. But I think in most cases, the carriers don't look that close.
And please ask for assistance when you have issues. There are so many posts though, its hard to tell who has really read and who hasn't sometimes. Just remember that the stickies at the top of the forums are your friends and there is really good info there to help you get unstuck (most of the time).
i love you guys
Related
Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.
Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*
Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.
Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg
Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.
Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963
Hey im new to these forums and just need help unlocking my Cingualr 8125 or put a different Rom liek the xda windows mobile 6.0. Im folowing the steps but like when i open "ROMupdateutility.exe" I follow the steps and when it starts my 8125 goes to like bootmode? It has 3 colors on the screen
red greedn and blue and then on the ROMUPDate utlity i got error 300...i tryed like so many times i need help thnx =[
EDIT : the error says error 300 invalid update tool.... "This error message will appear when you use the incorrect RUU to upgrade. Please make sure you use the correct RUU version to upgrade." where do i get the correct RUU then?...
Also found out that its a G4 because of the Ip number or w/e because it has 3 zeros then a 1 for example .0001
[Help] Unlocking Cingular 8125
Hey im new to these forums and i need help unlocking my Cingular 8125
From what ive seen on these forums my phone is G4 Because it has xxx1 at the end of the ip or w/e that **** is. I would gladly appreciate it if someone would help me unlock my G4.One of my friends has his unlocked it looks like Vista and it has all these sweet programs. Since i just got mine its g4 I guess..and since he got him like 2 months bevfore me maybe his was g3 so it was easy...
This is probably why so many people flame noobs. cause of questions like this. If you have any sort of I.Q in you you would have checked this link out http://forum.xda-developers.com/showthread.php?t=293480 its the very first post. good luck
deviusdragger said:
This is probably why so many people flame noobs. cause of questions like this. If you have any sort of I.Q in you you would have checked this link out http://forum.xda-developers.com/showthread.php?t=293480 its the very first post. good luck
Click to expand...
Click to collapse
Noob, i already checked that one. Its stickied why wouldnt i not check it before posting this thread?
The link's on that Thread are dead. They dont work anymore ***. Lol
Can't we all just get along? Let's keep things nice-nice, okay?
Anyhow, chaos36 it's really important to read up on this site before posting. All the answers are readily available (with some time and patience).
Here's a quick guideline ...
1. Your first stop should be here (the wiki)
All the information and links to get the most out of your device
2. How to SIM unlock your phone, look here.
3. How to flash any ROM other than your carrier's, here
4. Enjoy!
But just a bit of friendly advice for you in the future. Read and search all you can, then if you can't find what you're looking for, read and search some more before posting.
This site is a great place for developers, hobbyists, and enthusiasts. It's not a "helpdesk". But as long as you help yourself first, you'll find a lot of great (nice) people that will help you along your way.
Good luck and have fun!
http://forum.xda-developers.com/showthread.php?t=293480
Thnx..i ****ed up when i turn on my 8125 it stays at cingular raising the bar witht he ipl and spl number -.- please hel and ty.
chaos36 said:
Thnx..i ****ed up when i turn on my 8125 it stays at cingular raising the bar witht he ipl and spl number -.- please hel and ty.
Click to expand...
Click to collapse
Can you still get into the bootloader screen? (the red/blue/green screen)
To get into the bootloader you need to HOLD the camera button and tap the reset button.
Yes im in that screen right now if you mean the screen thtat has 3 stips a red then green then blue?
Now what do i do when im there?
chaos36 said:
Yes im in that screen right now if you mean the screen thtat has 3 stips a red then green then blue
Click to expand...
Click to collapse
Alright, this is a good example (one that we've all seen over and over again here) of how not to jump into flashing your phone without reading everything thoroughly.
Stay in the bootloader screen, keep your USB cord plugged in and reflash your original carrier's ROM. That will get you back to factory specs.
Then, don't try flashing anything else UNTIL you read everything I mentioned in the previous post first, at least a couple times through.
Just some advice
TaurusBullba said:
Alright, this is a good example (one that we've all seen over and over again here) of how not to jump into flashing your phone without reading everything thoroughly.
Stay in the bootloader screen, keep your USB cord plugged in and reflash your original carrier's ROM. That will get you back to factory specs.
Then, don't try flashing anything else UNTIL you read everything I mentioned in the previous post first, at least a couple times through.
Just some advice
Click to expand...
Click to collapse
How do i reflash the original carriers ROM?
And thank you for helping me out.
[Do you got AIM would be much easier and qicker to discuss thiss.]
chaos36 said:
How do i reflash the original carriers ROM?
And thank you for helping me out.
Click to expand...
Click to collapse
Well, glad to help. To reflash your original carriers ROM, you need to download it from their website and execute it.
Ok i got a cingular 8125. So to download it i go to Cingualr.com?...Sorry for being so noob and do you got AIm will be much easier for you to help me there ty.
I'm actually about to hit the sack. But you can get the Cingular ROM here. Just download and install it and you'll be good.
Good luck!
Wow you gave me a direct link. Thank you for all your help! Do you got AIM incase i cant figure out how to do this? maybe u can help me out tomorrow thnx for all your time and help.
Taurus pretty much held your hand and walked you thru it. You should be fine after this point. And if some of the links arent working, just let some of the mods now and they will take care of all that stuff. So good luck with the flashing.
deviusdragger said:
Taurus pretty much held your hand and walked you thru it. You should be fine after this point. And if some of the links arent working, just let some of the mods now and they will take care of all that stuff. So good luck with the flashing.
Click to expand...
Click to collapse
Yes he did and it was nice of him for doing that to me. My 8125 is fine now..but the link you gave me for the flash's are dead the links dont work =[
i was trying to update my rom..
and i brickd my mda vario any unbrickers for it?
Unless your usb port fell out or smoke is coming out of your Wizard, I am pretty sure you didn't brick it.
First, read the wiki, read the stickies, help IS found there.
Secondly get your phone into bootloader and reflash a stock rom.
Third, do not ask how to get into bootloader...again read the wiki and stickies.
Finally if you have READ READ READ you will be able to unlock your Wizard and update it.
PS-- there are no "UN-Brickers", only a lot of reading and educating yourself about your device.
Oh, and HOW do you know it is bricked? If you can get into bootloader mode and your usb port is attached, your phone is not bricked...just being stubborn...and from you very vague description, we cannot really help you either. Now if you said my phone is smoking, it is a G4, it is singing Wayne Newton songs, then we'd know where to begin to help you. IS your phone a G3 or G4? If you don't know, you need to read more. How is your phone behaving? What rom were you trying to update to? Are you CID unlocked? These are things we need to know to help you. But we will not hold your hand. You need to do the leg-work by reading and understanding your device.
well dude thx alot well i just need to access the bootleg thing and reupdated it thx alow its workd!!!
thx
Morning all
I have been offered a swap for my iPhone for a brand new boxed Orange TyTn II and Im just wondering if its worth doing?
I have had previous windows mobile phones and do like the phones so I am considering the trade, I am currently on o2.
The thing is i have read all the posts about unlocking and flashing roms etc and im a little on edge about doing it myself as im sure i will break it lol
I would basically need to sim unlock the phone and remove all the orange software as I think it looks naff!
How much work is envolved in doing what i need and how long would it take?
Sorry if im repeating a post, im not the best at forums and get lost with all this info you guys have!
Cheers
Sy
Absolutely YES!!!
There is no contest. The TyTN II wins hands down!!!
Leave well enough alone. Perhaps get a sim unlocker. Just do a search and you should find something. But don't play around with flashing roms etc. You may regret it.
Use the HTC original apps which you will find on a sticky at the beginning of this forum.
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
I'm wondering if i should get a TyTn 2 now or wait for a Xperia.
Checked out the TyTn at a store a couple of days ago and i loved it, the only thing i didnt like was that it doesnt have a radio. Then i read around in this forum and came across the driver problems and the touchscreen bug and due to them i'm more inclined to wait for Xperia, but then i checked out Xperia's design and i didnt like the way the keyboard slides to, makes you operate the joystick with the right hand instead of the left and that's kind of uncomfortable.
seriously, who uses radio? I stream my Sirius satalite radio..
Sirius Pwnz AM/FM
..........
Audio said:
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
Click to expand...
Click to collapse
dont you need to CID unlock it first? what is this hardspl and what does it do?
jonneymendoza said:
dont you need to CID unlock it first? what is this hardspl and what does it do?
Click to expand...
Click to collapse
Yes you MUST CID unlock as well (unless it has already been done, which is doubtful if it is on Orange).
My advice...Before even getting the TYTN II, read the sticky's and Wikis in the upgrading ROM section at least 3 times over to ensure you have an idea of what you are going to need to do before even doing anything. when you think you understand it, read them again.
Then go ahead and flash any ROM you fancy and enjoy the benfits of the TYTN II voer the Iphone.
HardSPL is the replacement bootloader that allows you to install an non original ROM.
Im on T mobile and i hav heard that the ROM is not heavily branded. im just worried about bricking it. i already have the MDA viara 3.
reading this thread http://forum.xda-developers.com/showthread.php?t=334679 doing hardspl, does that automaticly unlock the CID or is there another tool to do that? if so do CID unlock it first and then hardspl?
You will NEED to CID unlock AND HardSPL...Do not consider doing anything untill you are 100% certain of the steps you are performing and why, otherwise you will have a rather expensive paperweight.
EVERYTHING you need to know and more about Rom flashing is contained here
http://forum.xda-developers.com/showthread.php?t=369282
Seriously, ensure you read every link and sub link related to ROM flashing. Even make sure you read the "inspirational reading" bit, that will give you the confidence to try it.
As long as you read you will be fine.
When I was new here I spent 4 days solid reading reading and reading before biting the bullet and flashing my first ROM. At
Thanks for the advice. one small question. if i was to follow this guide : http://forum.xda-developers.com/showpost.php?p=1790046&postcount=3 word for word i should be succesful?
there is one question i am still confused about and thats this hardspl/cid unlock. according to the Thread i linked, all i got to do is follow the guide from HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) and bam im ready to Flash the ROM?
also what are the major benefits of flashing to a custom ROM?
does the procedure from that last link above hardspl AND CID at the same time?
hi i managed to hardspl my device succesfuly. so im ready to install a new cooked ROM? what are the best ROMS out there that i can try. i have seen dutty's ROM that many have used and was wondering if thats the best one
Does the DUTTY rom improve the camera and video playback?
Warranty Issue
I've been trying to read up as much as I could thru the wiki and through the threads but it seems that theres so many technical posts but no posts covering simple questions, so I thought I'd post some here.
1) I first got my trinity (P3600i) last 11 months and unlocked it with olipro tool meant for P3600i, it worked a treat, the tool at the time made it super CID as well as unlocking it. Does this pretty much mean my warranty is void already?
If it does, can I revert back to normal CID? (SPL)
2) I already flashed my machine with stock RUU----ship
3) How am I to find way/s to revert SPL.......tried SSPL-trin.exe from my machine and that does not work at all. Do this unit require different SSPL-trin.exe file. Same goes to CID tool which was specially build by Olipro just meant for P3600i ?
Sorry I know that a lot of these qs might seem simplistic and have been answered many times but I've been searching and it's quite difficult to just get simple answers!Thanks for your help.
I am running out of time 'cos my warranty will be another 20 days time.
Thanking you all in advance.
regards
Sorry just to float this