Related
Hello, my name is Kc and I'm new to these forums. I just purchased a Siemens SX66 on the Cingular network. I noticed that there is a ROM upgrade of version 1.40. I have looked around these forums for info but I'm not really familiar with the lingo so I'm not making much progress on my own. Can someone please help me to understand how to update my ROM for my SX66?
ROM Version: 1.32.10 WWE
ROM Date : 12/17/04
Radio Vr. : 1.02.10
Protocol Vr. : 1337.35
ExtROM Vr. : 1.32.115 WWE
Model # : PH20B1
Any help would be great, thank you much.
Read Wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
Still a problem.
First off, thank you TheLastOne, but I'm still having a problem. I tried to install the new Dutch ROM but after I click the update it goes to the next screen telling me what version of stuff I have on my phone then it attempts the update, and then brings up a screen telling me that the country ID is wrong. Did I miss something? Also another question, my display seems to be a little wierd as of late, I have a black boarder around the entire display as if the OS isn't set for the right resolution. Is there a way to make it fit the whole screen?
Thanks again.
~Kc
Figured it out.
Well after a few hours on my phone no longer working I really decided it was time to dig deep and figure it out on my own. I got it up and running with the new Dutch ROM and I'm really happy with it, especially the WiFi, it finds networks much faster now. I have a new question though. I don't use GPRS at all for connecting to the internet, and I have no connections set up. I just want to use WiFi, but I have the annoying 'G' symbol at the top of my PPC. Anyone know of a way for me to get rid of that? Thanks for making this site, and thanks to all the people who contribute. I'm a software developer and you can expect some releases for PPC now that I have one myself.
help with upgrade
its seem that you learn fast so please help me
i also own a cingular sx66 where can i download the dutch rom and how you skip the contry id problem many thank
Did you miss the 2nd post in this thread, seems to have worked for SmearedBlackInk
for mr nobody sunrise swiss
r u missing your mind in the second post it only 1.40 upgrade and not the dutch rom ?????????????
so next time check your post and dont be rude
israel
I'll try to explain
Well it's going to be hard to explain. I used a mix of method 1 and 2 on the page:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
The ROM I used can be downloaded here:
ftp://xda:[email protected]_DT_WWE_DutchRetail_14000_556_11300_Ship.zip
I tried to use method 1 but it just kept giving me a country ID error, so I nuked my ROM, then tried to install using method 2, but it kept stoping halfway through. I mixed my files a bit and used method 1 and some files from method 2 to form a new install folder and voila it worked.
Wow, I just read that and it doesn't really help at all does it.
I think the real trick is just to wipe your ROM before installing. I'd back it up first though, because it's kind of scary when your phone just sits in serial or usb mode and that's it. Sorry I couldn't be of more help.
more help
first many thank for all the links
i change the deviceid=1 and pass the first rom but in the second he stuck
and still give me country error can u help me how u mix the two option
israel
Read wiki. Method one says to download the ROM you want, follow by MaUpgradeUt_noID.ZIP. Unzip MaUpgradeUt_noID.ZIP into your ROMs folder, and run MaUpgradeUt_noID.exe twice and presto...
yop
yes its work many thank as it look a lot better on my first feeling the
wi-fi improve and also the radio bt
hope some more improvement will come in
Can't download MaUpgradeUt_noID.ZIP
broken link???
Sorry my powers are failing me, did you have a link in mind or was this a general why does not somebody search the whole of the site (as in all posts as well as the ftp site and wiki) to work out which link to that file does not work.
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
broken link???
Well not for me, link works fine, opens up a save file dialog.
I get connection refused whilst trying to connect to....
Unplugged router, connected pc directly to modem, worked fine then!
How are you doing this?
Are you in a ftp program and if so have you logged on with the correct user/pwd.
Are you just clicking the link and you firewall software is refusing the download?
Its a problem on your side, the link works fine for me, as is, as posted by you.
PS do you need an answer in the other thread as well?
Hi all,
I am new to these devices and have purchased a htc tytn ii is is an australian model and i live and will use it in australia. I do not know if the device requires the update, can you please inform as to how i can check.
Trouble is i have been reading up on this pda phone alot and realised that an update from wm6.0 to wm6.1 is available.
I have downloaded this file:
RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship
If it's not too much trouble someone please inform me as to what i specifically need and what i specifically need to do to update from wm6.0 to wm6.1. I realise the importance of this process but i do not understand the language being used on the forum. A step by step guide will be much appreciated.
Also a list of required software and locations to these would be much appreciated.
Thank you.
Have you looked through the Wiki?
Yes i have and i couldn't make heads or tails of it. I just need a list of instructions.
HTC TYTN II USER said:
Hi all,
I am new to these devices and have purchased a htc tytn ii is is an australian model and i live and will use it in australia. I do not know if the device requires the update, can you please inform as to how i can check.
Trouble is i have been reading up on this pda phone alot and realised that an update from wm6.0 to wm6.1 is available.
I have downloaded this file:
RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship
If it's not too much trouble someone please inform me as to what i specifically need and what i specifically need to do to update from wm6.0 to wm6.1. I realise the importance of this process but i do not understand the language being used on the forum. A step by step guide will be much appreciated.
Also a list of required software and locations to these would be much appreciated.
Thank you.
Click to expand...
Click to collapse
Connect your HTC to the PC using the provided USB cable.
On your PC, find the downloaded file.
Using your mouse double-click (that's clicking twice on the left mouse button) the downloaded file.
Follow the instructions on screen.
http://forum.xda-developers.com/showthread.php?p=1790046#post1790043
http://forum.xda-developers.com/showpost.php?p=1846653&postcount=800
http://forum.xda-developers.com/showthread.php?t=369282
While we are talking about Australian models anyone know what the difference between these 2 roms is
I know they both have Australian operator settings
RUU_Kaiser_HTCASIA_AUS_3.29.710.1_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
RUU_Kaiser_HTCASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
So all i have to do is run the file i have downloaded. I don't need a radio or SPL?
Also is the file i have downloaded the correct file? or should i get one of these:
RUU_Kaiser_HTCASIA_AUS_3.29.710.1_radio_sign_25.83 .40.02_1.65.16.25_Ship.exe
RUU_Kaiser_HTCASIA_WWE_3.29.707.0_radio_sign_25.83 .40.02_1.65.16.25_Ship.exe
Thanks.
Yes
If you have the original rom came with the pocket pc there is no need for SPL just connect your phone to pc with the usb cable and run the downloaded file.
Cool, what about those other 2 ROMS i mentioned?
one is for Ausies only and the other one is for everyone .. That is all
is there any difference between the two
well i finally got activesync working.
i started the ROM update with the below file:
RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship
and all went well got to the tricolour screen and got a error message on the computer screen:
ERROR[294] : INVALID VENDOR ID
is there a way around this?
Yes. Hard SPL follow the instructions in the link to the letter.
PSi
no worries. got it up and running.
I bought the TYTN II yesterday and registered on the HTC website. The 6.1 upgrade is not there anymore.
Someone else have an alternate link or is it being taken off for another update for the bugs??
If anyone know the link for the update, I would like to upgrade from my 6.0
Any big differences?
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
gomesmachado said:
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
Click to expand...
Click to collapse
Why do people continue to screw up their phones by not reading, not understanding what they are doing, and doing things half the way. Are you all just rich and don't care about bricking a $500 dollar phone ? You are lucky you are able to recover your phone at all
Jumpspl is not hardspl . Jumpspl transitions your phone from stock spl to hardspl. You cannot flash any rom stock or custom ,that isn't specifically made for your carrier, until you have hardspl on your phone.
Read thoroughly and follow all the steps here, do not take short cuts and do not skip ahead,
http://forum.xda-developers.com/showthread.php?t=433835
canot do.....
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
gomesmachado said:
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Click to expand...
Click to collapse
What do the numbers say on your bootloader screen ( tricolored)?
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Press and hold camera button and power button and do a soft reset to get into bootloader to see what it says.
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Thats because you're not making it go to that screen..
Press and hold camera button and press reset
it says:
KAIS130
SPL-3.28.000
CPLD-8
gomesmachado said:
it says:
KAIS130
SPL-3.28.000
CPLD-8
Click to expand...
Click to collapse
Go to the wiki and find the original rom from your carrier and flash that ie: AT$T , T- Mobile, orange , 3 etc. Then after doing trhat try all the steps in the flashing for noobs thread again.
the only problem is that I bought the phone not from a carrier but from a store in Portugal and the phone was unlocked...
do you think I can still find the original ROM?
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
gomesmachado said:
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
Click to expand...
Click to collapse
It is not 3.28.410.0 on this list ?
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Help me Denco7 you're my only hope.
Denco7,
I tired to run the file that you told me with no luck.
it showed the same message of before:
ERROR 294: INVALID VENDER ID
what else can I try to fix my phone?
Does this help
http://forum.xda-developers.com/showthread.php?t=335568
http://forum.xda-developers.com/archive/index.php/t-425558.html
Hello, I am new here. I tried to change the rom in my SE X1 myself.
My first problem was on the first step.
I opened hardSPL, the program found the phone. But it doesn't update it. After 30 seconds it says: Error 202: CONNECTION
but I connected it, activesync is open??!!!
And do I make everything right?
1.) HardSPL - to open the phone for the new rom
2.) how to get new rom on the phone?
3.) how to make it to a perfect end?
please help me, I tried to read me through the forum, but now i am confused.
thank you
best regards
daniel
Strogach77 said:
Hello, I am new here. I tried to change the rom in my SE X1 myself.
My first problem was on the first step.
I opened hardSPL, the program found the phone. But it doesn't update it. After 30 seconds it says: Error 202: CONNECTION
but I connected it, activesync is open??!!!
And do I make everything right?
1.) HardSPL - to open the phone for the new rom
2.) how to get new rom on the phone?
3.) how to make it to a perfect end?
please help me, I tried to read me through the forum, but now i am confused.
thank you
best regards
daniel
Click to expand...
Click to collapse
After you have succeeded in installing the HardSPL you have to download any ROM that you want to try on this forum. I suggest that you use the MicroSD method as it is much easier than updating it using your PC. Try reading this thread, if you still have not.
http://forum.xda-developers.com/showthread.php?t=446070 and also this one (for flashing ROM's using MicroSD method) http://forum.xda-developers.com/showthread.php?t=445662
You can also read this thread for a more comprehensive tutorial http://forum.xda-developers.com/showthread.php?t=497511