Database Develop

How long to flash a Blue Angel? - Cause I think it's stuck!

I've currently followed the instructions for the 1.31 with Arabic and different radio file because that's exactly same original hardware as my UK O2 XDA IIs.
But I've ran the BaUpgradeUt.exe and it confirmed the version changes, but now it doesn't seem to be doing much.
Phone has gone dark and simply says:
USB
v2.06
And the Upgrade program says: Checking the information on the device please wait.
And a warning not to disconnect it.
Erm this is my first flashing so just a little worried I've toasted my new device :-( I can appreciate it takes a while to transfer 30Mb odd over USB, but it hasn't done anything for almost 10 minutes now :-(
Help please? :-(
Thanks!

And I think I've solved my own problem. Everything you need really is in this forum... somewhere
For everyone else who stumbles over this looking for same thing. I simply took battery out for 30 mins (to flatten backup I assume) and then hard reset it (comes up with serial v2.06 at point you unplug from cradle) and then restarted PC and re-ran update program and SEEMS to be going okay at the moment!

Hi,
I have the O2 XDA IIs just like you too but still with the original ROM. You can get a copy of the original ROM from O2 now off their myxda uk site if there are any problems.
Have you got a step by step guide of how you upgraded to 1.31?
Cheers

Hi,
Take a look at the Wiki site. It has all the info on there. I'm now running a 1.31 main ROM (was originally 1.12), a 1.06.02 radio (originally 1.02 I think) and an extended ROM that is hacked up from Orange's (the network I'm actually on!) as well as my own choice of programs etc. Wiki has all the info! It rocks! Thanks to the guys (and gals?) who write it!

Problems with Go-Suite v. 0.91

Hi guys,
first of all, thank you for this awesome forum. I've been a frequent visitor in this forum and I've already found a lot of useful tips but now I need your help because I don't know what to do anymore.
First of all a brief explanation: I'm using a Kaiser (German Vodafone branding). My old device has been replaced by Vodafone due to a hardware defect. Vodafone gave me completely new device with the following data:
Windows Mobile 6.1 Prof
CE OS 5.2.19122 (Build 19122.1.0.3)
ROM-Version: 3.28.162.2 GER (this is the latest version)
I used exactly the same version on my old device and the program mentioned above Go Suite v. 0.91 does not work with my new Kaiser anymore, however it worked great with my old device. Go Suite requires two further programmes in order to run:
Go Suite v.0.91 (GoSuite.ARMV4.cab - can be downloaded here
netcf.all.wce4.ARMV4.cab
PocketGnuGo.ARMV4.cab (also downloadable on the same website)
I followed the installation manual step by step but it still doesn't work. I've tried everything possible to get the software started. However, this was the first program I installed on my Kaiser (well, I tried).
If you need further information feel free to ask me. Neither Go Suite nor Windows show any error reports, only the launching symbol shows up for a couple of seconds after clicking on the icon.
I'm sorry that I can't give you more detailled information about the error. Is there any tool or a possibility to get to read the Windows error report? If you know one, just let me know where to get it and I'll deliver further details.
I hope you can help me - I'm sort of desperate since I really need this programme and I don't know what to do.
Thank you!
Harald

Harald Kilian said:
Hi guys,
first of all, thank you for this awesome forum. I've been a frequent visitor in this forum and I've already found a lot of useful tips but now I need your help because I don't know what to do anymore.
First of all a brief explanation: I'm using a Kaiser (German Vodafone branding). My old device has been replaced by Vodafone due to a hardware defect. Vodafone gave me completely new device with the following data:
Windows Mobile 6.1 Prof
CE OS 5.2.19122 (Build 19122.1.0.3)
ROM-Version: 3.28.162.2 GER (this is the latest version)
I used exactly the same version on my old device and the program mentioned above Go Suite v. 0.91 does not work with my new Kaiser anymore, however it worked great with my old device. Go Suite requires two further programmes in order to run:
Go Suite v.0.91 (GoSuite.ARMV4.cab - can be downloaded here
netcf.all.wce4.ARMV4.cab
PocketGnuGo.ARMV4.cab (also downloadable on the same website)
I followed the installation manual step by step but it still doesn't work. I've tried everything possible to get the software started. However, this was the first program I installed on my Kaiser (well, I tried).
If you need further information feel free to ask me. Neither Go Suite nor Windows show any error reports, only the launching symbol shows up for a couple of seconds after clicking on the icon.
I'm sorry that I can't give you more detailled information about the error. Is there any tool or a possibility to get to read the Windows error report? If you know one, just let me know where to get it and I'll deliver further details.
I hope you can help me - I'm sort of desperate since I really need this programme and I don't know what to do.
Thank you!
Harald
Click to expand...
Click to collapse
tytn 2 ultimateXv9. your apps working.

Cannot Hard SPL

Hello my name is is Richy and I am hoping someone anyone can help me out. I currently have an HTC TILT 2 (AT&T) I am trying to download NRG ROM to my HTC TILT 2 BUT I can't get my phone to HARD SPL. I am getting an error message stating; error code 246 Device not responding.The update utility cannot get a response from your PDA Phone. Please check that your USB/CABLE is connected properly between the PC and your PDA Phone. Also check your PDA Phone. Can you please help I tried everything.
[email protected]

Hi, first of all, you should probably post your problems here:
http://forum.xda-developers.com/showthread.php?t=550540
This is the official HardSPL thread. It may seem like it's too long for anyone to bother reading, but there are THOUSANDS of us, with nothing better to do than lurk in threads in the middle of the night and help others in need.
Now, you say you are having an issue with HardSPL, however, it looks like you are going straight to the EnergyRom (good choice in ROM, BTW)
Make sure you have an ActiveSync connection first before you start, then follow the steps at the above link to the letter. Any further questions, feel free to post in the appropriate thread.

paparichy said:
Hello my name is is Richy and I am hoping someone anyone can help me out. I currently have an HTC TILT 2 (AT&T) I am trying to download NRG ROM to my HTC TILT 2 BUT I can't get my phone to HARD SPL. I am getting an error message stating; error code 246 Device not responding.The update utility cannot get a response from your PDA Phone. Please check that your USB/CABLE is connected properly between the PC and your PDA Phone. Also check your PDA Phone. Can you please help I tried everything.
[email protected]
Click to expand...
Click to collapse
Look here...http://forum.xda-developers.com/showthread.php?p=5300845&highlight=enablerapinew.cab#post5300845

[Q] WM 6.5 for htc touch pro2

Hi all.This is my first time visiting this forum.I hope you can help me.
I have a htc touch pro2 and it is in german language.Can you please find for me a WM 6.5 for it because i want to upgrade it in english.I have HardSpl and Active SInc but i only need WM6.5.
I tried to download it in htc official page but it requires a S/N and when i put my S/N it says it is a wrong S/N.
Could you find for me a WM6.5 to download without requireing a S/N.
Thank you.

If you have Hard SPL installed, then flash any one of the custom ROMs in this forum.

I`m sorry but i didn`t understand.Can yoy explain to me please what do you mean?
Look I want to do this with my htc touch pro2:
I read this somwhere and I want to upgrad my HTC in this way also.
As you can see this is for HTC touch pro not for htc touch pro2 but someone said to me that it is the same work process.
hello
i have 1 htc touch pro in hand..
phone is in german languages and i want to change laguages to english...
any1 can help me to do this?? is it safe???
btw this link is a safe instruction??
So let’s say that you live in Taiwan and want to buy a fancy new HTC Touch Pro smartphone. You’ll quickly learn that in Taiwan you can only find the Chinese version of this phone. Importing a European version is expensive, plus you won’t get any contract signup discounts. US phones use provider-customized firmware that may not work correctly or optimally in Taiwan.
Don’t despair. There’s active communities of HTC enthusiasts who have extracted HTC firmware in English and other languages. It’s a fairly simple process to change the firmware on your phone, but the documentation is slim, so it’s difficult to know where to start. Here’s a simple guide on what you need to do. Each page referenced has additional information if you need more detail:
1 ) Download and install on your computer the English version of ActiveSync from Microsoft: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx)
2 ) Turn on your phone and connect the USB cable that came with the phone (aka the charging cable) between your phone and computer and set up the phone to sync. You don’t need to actually sync anything yet, you just need to get ActiveSync on your computer to say it is “Connected”.
3 ) Download to your computer and extract RaphaelHardSPL-Unsigned_1_90_3.zip from here: http://forum.xda-developers.com/showthread.php?t=410150 (http://forum.xda-developers.com/showthread.php?t=410150). Normally you can only install ROM firmware versions intended for your version of the HTC Touch Pro. HardSPL will change the SPL firmware to allow any HTC Touch Pro ROM firmware to be installed.
4 ) Make sure your phone battery is more than 50% charged or the SPL and ROM firmware will not install.
5 ) Run RaphaelHardSPL-Unsigned_190_1_3.exe on your computer. Follow the prompts in the program to start the SPL upgrade. After the upgrade starts there may be an inquiry on your phone’s display asking permission to switch into the bootloader. Press “是” (yes). Do not do anything on your phone or computer until the installer says the process is completed and your phone has restarted. (Note that it says the firmware upgrade takes up the 10 minutes but the SPL is small so it will be much faster.)
6 ) Download to your computer RUU-Raphael-HTC-WWE-1.90.405.1-Radio-Signed-Raphael-CRC-52.33.25.17-1.02.25.19-Ship.exe from http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs). At this writing there are newer ROMs there but this one is the stable released version on shipping English phones. (In the future there may be a newer stable release.)
7 ) Run RUU-Raphael-HTC-WWE-1.90.405.1-Radio-Signed-Raphael-CRC-52.33.25.17-1.02.25.19-Ship.exe on your computer. The interface is similar to the SPL upgrade, but this upgrades the main ROM firmware. Again, do not do anything on your phone or computer until the installer says the process is completed and your phone has restarted. This firmware is very large so it will take several minutes.
8 ) When your phone restarts it’ll go through the install process just like a brand new phone. (Your dealer may have done this for you when you bought the phone.) It’ll take several minutes to install the OS and additional software, calibrate the display and setup your phone network settings.
9 ) Congratulations, your Chinese phone now speaks English.
But in step 6 there is a 6.1 WM and i want a 6.5.Is it clear?
Thank you!

Are you using a Raphael (Touch Pro) or a Rhodium (Touch Pro2)?

drilli said:
I`m sorry but i didn`t understand.Can yoy explain to me please what do you mean?
Look I want to do this with my htc touch pro2:
I read this somwhere and I want to upgrad my HTC in this way also.
As you can see this is for HTC touch pro not for htc touch pro2 but someone said to me that it is the same work process.
Click to expand...
Click to collapse
process may be similar but IT'S NOT THE SAME FILE!! you have a touch pro 2, that Raphael file will brick it. you need to use touch pro 2 or rhodium Hard-SPL, not raphael...

Ok i understand now.So i have to download rhodium HardSpl.
I also found this rom:
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So now i have these tools:
1.ActiveSync
2.I have to download Rhodium HardSpl
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So would it work this for me.I mean after i download Rhodium HardSpl will I have a htc touch pro2 in English ?
Thanks for your reply!

drilli said:
Ok i understand now.So i have to download rhodium HardSpl.
I also found this rom:
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So now i have these tools:
1.ActiveSync
2.I have to download Rhodium HardSpl
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So would it work this for me.I mean after i download Rhodium HardSpl will I have a htc touch pro2 in English ?
Thanks for your reply!
Click to expand...
Click to collapse
Hard SPL is what will allow you to flash non-stock ROMs to our device. Once you put that on, then you will be able to flash the ROM you listed as well as any other one you find for the Rhodium.

cajunflavoredbob said:
Hard SPL is what will allow you to flash non-stock ROMs to our device. Once you put that on, then you will be able to flash the ROM you listed as well as any other one you find for the Rhodium.
Click to expand...
Click to collapse
Just one another question.
Now i have these tools:
1.ActiveSync
2.Rhodium-HardSPL_V2_00R3_185HSPL.zip
from here: http://forum.xda-developers.com/showthread.php?t=550131
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
Would it work with these tools ?
And one thing that i don`t understand:
Is there any diference between Htc Touch Pro2 and Htc Touch Pro2(Rhodium) or this is the same thing ?!

drilli said:
Just one another question.
Now i have these tools:
1.ActiveSync
2.Rhodium-HardSPL_V2_00R3_185HSPL.zip
from here: http://forum.xda-developers.com/showthread.php?t=550131
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
Would it work with these tools ?
And one thing that i don`t understand:
Is there any diference between Htc Touch Pro2 and Htc Touch Pro2(Rhodium) or this is the same thing ?!
Click to expand...
Click to collapse
Since we've answered you four times with information relevant to your problem, and you still aren't understanding this, I'm going to simply say that yes, this is correct if you have a GSM version. I will strongly urge you to read up on what you are doing before hand so you don't risk bricking your device.
Rhodium is the model name for the Touch Pro2. If you look under your battery, you will find a model number that says RHODxxx where xxx is a three-digit number. This is useful in telling people here which device you have, as there are GSM and CDMA versions of the device. You have to be certain of which you will flash or you may brick your device.

cajunflavoredbob said:
Since we've answered you four times with information relevant to your problem, and you still aren't understanding this, I'm going to simply say that yes, this is correct if you have a GSM version. I will strongly urge you to read up on what you are doing before hand so you don't risk bricking your device.
Rhodium is the model name for the Touch Pro2. If you look under your battery, you will find a model number that says RHODxxx where xxx is a three-digit number. This is useful in telling people here which device you have, as there are GSM and CDMA versions of the device. You have to be certain of which you will flash or you may brick your device.
Click to expand...
Click to collapse
Thank You very much.
I have RHOD100 and as i saw in this forum it is not CDMA so it will work.
So i have first to flash rom with HardSpl and after that i have to install
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
I`m sorry for all these questions,but this is my first time trying something like that and i want to make sure that I will not brick my device.I won`t ask anymore for this problem.
Thank You!

drilli said:
Thank You very much.
I have RHOD100 and as i saw in this forum it is not CDMA so it will work.
So i have first to flash rom with HardSpl and after that i have to install
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
I`m sorry for all these questions,but this is my first time trying something like that and i want to make sure that I will not brick my device.I won`t ask anymore for this problem.
Thank You!
Click to expand...
Click to collapse
You seem to have the order correct. I would recommend that you spend a good amount of time reading about this, though. Make sure to read through the instructions and FAQ of the Hard SPL thread before you attempt it. This will save you a lot of time if you need to ask for assistance.

And finally JOB IS DONE!
Thank you for your help.You`re great hehe.

All HTC Tytn II English roms are missing

Hello everyone, I am new to the forums.
Anyways, I have been searching for an English Rom for my HTC TyTn II (GER) that is currently running on Windows 6.
But I have not found one link that works.
I want my phone to be able run the Android Gingerbread 2.3.5, if there is a later version that will be even better.
Please, I have been searching for hours now.
The phone has 120mb internal storage memory.
A great friend of mine gave me this phone. Not sure if that helps, but just putting it out there lol.
I already found some awesome How-To guides from this forum.
And I know this forum is still very active, which is good too.
What I need:
a working English rom
Android Gingerbread 2.3.5 patch... (not sure if I need the English rom, if I have this or not)
So may someone please help? Thank you in advance!

skyhonor said:
Hello everyone, I am new to the forums.
Anyways, I have been searching for an English Rom for my HTC TyTn II (GER) that is currently running on Windows 6.
But I have not found one link that works.
I want my phone to be able run the Android Gingerbread 2.3.5, if there is a later version that will be even better.
Please, I have been searching for hours now.
The phone has 120mb internal storage memory.
A great friend of mine gave me this phone. Not sure if that helps, but just putting it out there lol.
I already found some awesome How-To guides from this forum.
And I know this forum is still very active, which is good too.
What I need:
a working English rom
Android Gingerbread 2.3.5 patch... (not sure if I need the English rom, if I have this or not)
So may someone please help? Thank you in advance!
Click to expand...
Click to collapse
all official rom (English/WWE) for htc kaiser can you find at http://shipped-roms.com/index.php?category=windows mobile&model=Kaiser

So I downloaded all the WWE's and tried every one of them, but they all give me "INVALID VENDOR ID." I'm sure I have a HTC Tytn II, Kaiser. What is wrong? How can I fix it?

So I downloaded all the WWE's and tried every one of them, but they all give me "INVALID VENDOR ID."
Then I followed the Hard SPL guide, I got a white screen. And no Tri-color screen.
After that I just removed battery and re-tried it a few more times same deal, white screen.
Even followed a youtube guide: http://www.youtube.com/watch?v=UaCt5pUn6iI
Did not yield the same result...
The active sync however had a
So I tried SSPL-KAIS.exe using Microsoft ActiveSync, I simply moved the SSPL-KAIS.exe to the Windows Mobile-Based Device, then I clicked on the bootloader.. it brought up properties.
I thought this was supposed to be really easy from what I read on the forums, but I keep running into dead ends. lol.
Please I need to know if I'm doing anything wrong, if so how can I install the English rom? Because I can't, not yet anyways.
Thank you.