[Q] WM 6.5 for htc touch pro2 - Touch Pro2, Tilt 2 Windows Mobile ROM Development

Hi all.This is my first time visiting this forum.I hope you can help me.
I have a htc touch pro2 and it is in german language.Can you please find for me a WM 6.5 for it because i want to upgrade it in english.I have HardSpl and Active SInc but i only need WM6.5.
I tried to download it in htc official page but it requires a S/N and when i put my S/N it says it is a wrong S/N.
Could you find for me a WM6.5 to download without requireing a S/N.
Thank you.

If you have Hard SPL installed, then flash any one of the custom ROMs in this forum.

I`m sorry but i didn`t understand.Can yoy explain to me please what do you mean?
Look I want to do this with my htc touch pro2:
I read this somwhere and I want to upgrad my HTC in this way also.
As you can see this is for HTC touch pro not for htc touch pro2 but someone said to me that it is the same work process.
hello
i have 1 htc touch pro in hand..
phone is in german languages and i want to change laguages to english...
any1 can help me to do this?? is it safe???
btw this link is a safe instruction??
So let’s say that you live in Taiwan and want to buy a fancy new HTC Touch Pro smartphone. You’ll quickly learn that in Taiwan you can only find the Chinese version of this phone. Importing a European version is expensive, plus you won’t get any contract signup discounts. US phones use provider-customized firmware that may not work correctly or optimally in Taiwan.
Don’t despair. There’s active communities of HTC enthusiasts who have extracted HTC firmware in English and other languages. It’s a fairly simple process to change the firmware on your phone, but the documentation is slim, so it’s difficult to know where to start. Here’s a simple guide on what you need to do. Each page referenced has additional information if you need more detail:
1 ) Download and install on your computer the English version of ActiveSync from Microsoft: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx)
2 ) Turn on your phone and connect the USB cable that came with the phone (aka the charging cable) between your phone and computer and set up the phone to sync. You don’t need to actually sync anything yet, you just need to get ActiveSync on your computer to say it is “Connected”.
3 ) Download to your computer and extract RaphaelHardSPL-Unsigned_1_90_3.zip from here: http://forum.xda-developers.com/showthread.php?t=410150 (http://forum.xda-developers.com/showthread.php?t=410150). Normally you can only install ROM firmware versions intended for your version of the HTC Touch Pro. HardSPL will change the SPL firmware to allow any HTC Touch Pro ROM firmware to be installed.
4 ) Make sure your phone battery is more than 50% charged or the SPL and ROM firmware will not install.
5 ) Run RaphaelHardSPL-Unsigned_190_1_3.exe on your computer. Follow the prompts in the program to start the SPL upgrade. After the upgrade starts there may be an inquiry on your phone’s display asking permission to switch into the bootloader. Press “是” (yes). Do not do anything on your phone or computer until the installer says the process is completed and your phone has restarted. (Note that it says the firmware upgrade takes up the 10 minutes but the SPL is small so it will be much faster.)
6 ) Download to your computer RUU-Raphael-HTC-WWE-1.90.405.1-Radio-Signed-Raphael-CRC-52.33.25.17-1.02.25.19-Ship.exe from http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs). At this writing there are newer ROMs there but this one is the stable released version on shipping English phones. (In the future there may be a newer stable release.)
7 ) Run RUU-Raphael-HTC-WWE-1.90.405.1-Radio-Signed-Raphael-CRC-52.33.25.17-1.02.25.19-Ship.exe on your computer. The interface is similar to the SPL upgrade, but this upgrades the main ROM firmware. Again, do not do anything on your phone or computer until the installer says the process is completed and your phone has restarted. This firmware is very large so it will take several minutes.
8 ) When your phone restarts it’ll go through the install process just like a brand new phone. (Your dealer may have done this for you when you bought the phone.) It’ll take several minutes to install the OS and additional software, calibrate the display and setup your phone network settings.
9 ) Congratulations, your Chinese phone now speaks English.
But in step 6 there is a 6.1 WM and i want a 6.5.Is it clear?
Thank you!

Are you using a Raphael (Touch Pro) or a Rhodium (Touch Pro2)?

drilli said:
I`m sorry but i didn`t understand.Can yoy explain to me please what do you mean?
Look I want to do this with my htc touch pro2:
I read this somwhere and I want to upgrad my HTC in this way also.
As you can see this is for HTC touch pro not for htc touch pro2 but someone said to me that it is the same work process.
Click to expand...
Click to collapse
process may be similar but IT'S NOT THE SAME FILE!! you have a touch pro 2, that Raphael file will brick it. you need to use touch pro 2 or rhodium Hard-SPL, not raphael...

Ok i understand now.So i have to download rhodium HardSpl.
I also found this rom:
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So now i have these tools:
1.ActiveSync
2.I have to download Rhodium HardSpl
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So would it work this for me.I mean after i download Rhodium HardSpl will I have a htc touch pro2 in English ?
Thanks for your reply!

drilli said:
Ok i understand now.So i have to download rhodium HardSpl.
I also found this rom:
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So now i have these tools:
1.ActiveSync
2.I have to download Rhodium HardSpl
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So would it work this for me.I mean after i download Rhodium HardSpl will I have a htc touch pro2 in English ?
Thanks for your reply!
Click to expand...
Click to collapse
Hard SPL is what will allow you to flash non-stock ROMs to our device. Once you put that on, then you will be able to flash the ROM you listed as well as any other one you find for the Rhodium.

cajunflavoredbob said:
Hard SPL is what will allow you to flash non-stock ROMs to our device. Once you put that on, then you will be able to flash the ROM you listed as well as any other one you find for the Rhodium.
Click to expand...
Click to collapse
Just one another question.
Now i have these tools:
1.ActiveSync
2.Rhodium-HardSPL_V2_00R3_185HSPL.zip
from here: http://forum.xda-developers.com/showthread.php?t=550131
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
Would it work with these tools ?
And one thing that i don`t understand:
Is there any diference between Htc Touch Pro2 and Htc Touch Pro2(Rhodium) or this is the same thing ?!

drilli said:
Just one another question.
Now i have these tools:
1.ActiveSync
2.Rhodium-HardSPL_V2_00R3_185HSPL.zip
from here: http://forum.xda-developers.com/showthread.php?t=550131
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
Would it work with these tools ?
And one thing that i don`t understand:
Is there any diference between Htc Touch Pro2 and Htc Touch Pro2(Rhodium) or this is the same thing ?!
Click to expand...
Click to collapse
Since we've answered you four times with information relevant to your problem, and you still aren't understanding this, I'm going to simply say that yes, this is correct if you have a GSM version. I will strongly urge you to read up on what you are doing before hand so you don't risk bricking your device.
Rhodium is the model name for the Touch Pro2. If you look under your battery, you will find a model number that says RHODxxx where xxx is a three-digit number. This is useful in telling people here which device you have, as there are GSM and CDMA versions of the device. You have to be certain of which you will flash or you may brick your device.

cajunflavoredbob said:
Since we've answered you four times with information relevant to your problem, and you still aren't understanding this, I'm going to simply say that yes, this is correct if you have a GSM version. I will strongly urge you to read up on what you are doing before hand so you don't risk bricking your device.
Rhodium is the model name for the Touch Pro2. If you look under your battery, you will find a model number that says RHODxxx where xxx is a three-digit number. This is useful in telling people here which device you have, as there are GSM and CDMA versions of the device. You have to be certain of which you will flash or you may brick your device.
Click to expand...
Click to collapse
Thank You very much.
I have RHOD100 and as i saw in this forum it is not CDMA so it will work.
So i have first to flash rom with HardSpl and after that i have to install
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
I`m sorry for all these questions,but this is my first time trying something like that and i want to make sure that I will not brick my device.I won`t ask anymore for this problem.
Thank You!

drilli said:
Thank You very much.
I have RHOD100 and as i saw in this forum it is not CDMA so it will work.
So i have first to flash rom with HardSpl and after that i have to install
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
I`m sorry for all these questions,but this is my first time trying something like that and i want to make sure that I will not brick my device.I won`t ask anymore for this problem.
Thank You!
Click to expand...
Click to collapse
You seem to have the order correct. I would recommend that you spend a good amount of time reading about this, though. Make sure to read through the instructions and FAQ of the Hard SPL thread before you attempt it. This will save you a lot of time if you need to ask for assistance.

And finally JOB IS DONE!
Thank you for your help.You`re great hehe.

Related

SIM Unlock help...

Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.

the wing by tmobile

hello: iam trying to unlock my phone so i can update the sotware to windows mobile 6 can anybody help me with this ?
Ok. Several things: 1) If you have the default T-mobile ROM on your Wing, you already have Windows Mobile 6.1. 2) If you post the same question in multiple subforums, you are very likely to be ignored. 3) If you only wish to CID unlock the phone, then all you have to do is flash any other ROM found on this forum. Be sure to search in there for "How to Flash" before opening another thread asking for help. Thanks!
what do u mean default T-mobile Rom?
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
fluoroseal said:
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
Click to expand...
Click to collapse
Alright. If you bought this phone directly from T-mobile US, then you do already have Windows Mobile 6.1. Also, to check for sure which version you have, you can go to Start->Settings->System->About. It will display what version of Windows Mobile you have.
I suggest you start with the wiki. Since you keep asking to 'unlock' your phone to be able to flash a new ROM i'm going to guess that you don't know what your doing. Make sure to read up on what is required to flash a new ROM. If you need any more assistance please make sure to ask the correct question in the correct forum and I'm sure everyone will be willing to help. http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
@elazullizard, unless something has changed, the Wing DOES NOT come stock with 6.1, it comes with 6. Now like I say, that may have changed, but I just bought a brand new in the box Wing manufactured in November 2008, and it booted into stock plain jane T-mobile 6. So yeah, this guy does indeed need to CID unlock and upgrade to 6.1 or 6.5.
thank you. and its hera 110 rom ver. 4.26.531 wwe and i do have windows 6 professional but i would like to cid my phone so it can take a new rom? and you help in this mater?
Yes, first of all soft-reset your device using the little hole on the left hand side of it, as soon as you press the little button in the hole, press and hold down the camera button until the 3 color bootloader screen is displayed...confirm that your IPL/SPL is above 4 and reply back to me with the exact number and we can get you started from there.
hello there ther a little problem I use the divce on and everday as my life line for work and i do not have a spare. and this forum takes forever for someone to get back to u ,
so if we can talk head up on yahoo or let me know when u are gona be on this site so we can do this together thank u paul
its rom ver 4.26.531/wwe
radio ver 03.21.90 and runing windows mobile 6 professional.......
Well my yahoo IM is listed in my profile information, and I still need to know your IPL/SPL in order to help you.
Dear friends,
I use T-Mobile Wing. 2007 manufacture.
Can u help me to upgrade it. It uses Windows Mobile v6.0. I wanted to change it to Window Mobile v6.1 or v6.5.
I use it with another sim card. Not T-Mobile. But it is working properly.
How can I do this?
IPL 4.10.0002
SPL 4.10.0000
Thanks a lot...
P.S. Can I use GPS from my mobile. I couldn't found it.
There are plenty of posts that teach you how to flash custom ROMs. If you don't know where to start try searching for "how to hard SPL." You can flash custom ROMs without having your phone hard spl'ed by using USPL. If you decide not to use hard spl there is a great change that you will brick your phone and will no longer be able to use it again. After all you have to do is search for a flashcenter or use mine http://mywing.info/dl/Flascenter.rar . As for you GPS question, there are plenty of gps programs out there. You just need to buy either an external bluetooth gps receiver or a USB gps receiver. pair it with your phone and your done.

htc touch diamon P3700 how to change language he;pppppppp

i have htc touch diamon P3700 with windows mobile 6.1 and i want to change language from sweedish to english and if not i want to upgrade it to wm6.5 i download many windows and it doesnt succes plz helpppppppppppp
the same pb plzzzzzzzzzzzzzzzzz
well, you both need to put on you reading glasses and start digging this forum, first of all, you need HardSPL on your device to be able to flash a ROM in a different language or WM build.
If you do a search here with the high lighted words you'll be able to figure it out, and also this link should give you a good start:
http://forum.xda-developers.com/showthread.php?t=416211
Are you sure that the Hard SPL (or whatever) works on european models of the touch diamond, i.e. the P3700
[first edit]
I mean, i can't get it to work. The program doesn't recognise my phone.
[Second edit]
I managed to get it working with hardspl. i had to use the "manual" way by moving "SSPL-Manual.exe" to my TD and then run the romupgradeutility with installs HardSPL.
Glad you figured it out, i am european and have the P3700, hardSPL worked automatically for me, but for an unknown reason sometimes you have to run it manually.
happy flashing

Help.. I f..... up.. again :)

I am trying to get the cool 4 shortcut buttons and was directed to something called Cookies Home Tab. I installed it but no program showed up.
I would then try and uninstall it an install it again with sense deactivated, but when choosing uninstall on the program (which shows up on the "remove program" menu, but not in the start menu) the "busy-cursor" is just rotating and nothing happens. I tried powering off and try again, and the same thing happens: It says its uninstalling, but it takes forever and nothing happends.
Can someone help? How do I get the program properly installed. I am running a danish original rom and assumed it would be compatible when directed there. I am not sure where to find my sense version. Can it be that its 2.16xxxxx or is that windows?
came99 said:
I am trying to get the cool 4 shortcut buttons and was directed to something called Cookies Home Tab. I installed it but no program showed up.
I would then try and uninstall it an install it again with sense deactivated, but when choosing uninstall on the program (which shows up on the "remove program" menu, but not in the start menu) the "busy-cursor" is just rotating and nothing happens. I tried powering off and try again, and the same thing happens: It says its uninstalling, but it takes forever and nothing happends.
Can someone help? How do I get the program properly installed. I am running a danish original rom and assumed it would be compatible when directed there. I am not sure where to find my sense version. Can it be that its 2.16xxxxx or is that windows?
Click to expand...
Click to collapse
If you cannot find your manila version, or at least search on how to find it, you really need to learn more before you mess up your phone.
I assume you did a hard reset after your registry issue. If not I suggest you do as you will probably have to do it a few times as you attempt to customize your device.
Your manila version can be found in Settings\Device Info\Software Info.
Read the thread on Cookies Home tab for compatable versions and install instructions. Post your questions there.
p.s. Thanks for implying...
I am really sorry for sounding like a total noob, but I DID read the post, installation instructions and whats not. I also read the "how to find your manila version" which also said to go to settings tab - device info - software info. The thing is that its danish on my phone and I cant find anything called device info on my tab, only "about" which leads me to a webpage with a lot of copyright and legal mumble jumble.
When going to settings - advanced - about the device I get a tab called version, where it says Rom Version 2.16.403.1 (67041) dan. But I dont know if thats it.
But lord, how many original stock roms can there be? Its a pretty new phone and I installed every HTC update available to me. I must say that configuring this little diamond seems to take a rocket scientist or above. I can use a computer pretty well, but getting a little modifications to the HTC UI seems to take a phd
You seem like a nice guy, and I would like to learn. Maybe you can help me out so I dont have to ask so many noobish questions. I really tried to learn by myself but it is a new world to me and it is quite overwhelming.
1) I read that installing a rom is ireversible. Does that really mean that I under no circumstances can replace the original software? Is a cooked rom really a whole other OS and replace windows mobile 6.5 completely? Or is it just a modified windows?
2) What is the distinction between HTC Sense, Touch Flo and Manila, if any? As far as I read the black and white icons is manila and the colored ones is sense... Is that true? And does that mean that I cant use any programs that needs manila to run if I have the HTC Ui with the colored icons?
I hope the above questions helps me to a basic understanding, so I further on dont have to ask so many questions.
PS) after installing TD2 tools my screen rotation line in my system registry came back, and I got rid of the landscape.. Thats one problem solved. Call recording aswell. If I find a way to get these 4 shortcut-buttons available and set one of them to my to-do list I think Im done.. No more tampering.. I promise.
came99 said:
1) What exactly is the difference between installing Cookies Home tab and installing another rom? As I understand it, a rom is a whole other OS, where this software only is a skin? Correct?
Correct, The ROM is the whole OS, where CHT is a modification to the Sense (Manila) UI.
2) I read that installing a rom is ireversible. Does that really mean that I under no circumstances can replace the original software?
No, You must first install hard SPL to be able to flash a cooked(custom) ROM.
Once you install HSPL, your device is considered "out of warranty".
However you can reflash a Stock ROM and then reflash Stock SPL to return the phone to the factory state for warranty purposes. So it can be reverted.
3) What is the distinction between HTC Sense and Manila, if any?
They are one and the same, also referred to as Touch Flo 3D (TF3D)
4) The original question about getting Cookie to work, if someone feels like helping.
If you have installed Cookie's Home Tab and soft reset, when you are on your home screen you should see the flip clock (assuming that in Settings\System\Home\Items is set to HTC Sense), on top right of that is a little dash, this opens up additional panels for your shortcuts.
There should also be a new program possibly in settings or \Programs\Tools called CHTEditor to access your tab settings.
I suspect that it installed, you just didn't know how to access it.
Lemme know.
PS) after installing TD2 tools my screen rotation line in my system registry came back, and I got rid of the landscape.. Thats one problem solved. Call recording aswell. If I find a way to get these 4 shortcut-buttons available I think Im done.. No more tampering.. I promise.
Click to expand...
Click to collapse
See above for answers. One quick word of advice; If the program interfaces with your today screen, phone functions, etc. install to device memory and never to Storage Card. Programs that just tweak the registry and settings can be installed to SD card.
Uhm, and I wouldn't be promising anything because its addicting. Once you pop, you can't stop!
Sorry.. I edited my post while you were answering. I found the preguide to roms which was just about basic enough to enlighten me. Your answers helped a lot to, and everything fell into place.
I do think that I will stay away from flashing as it seems like risky business.. The option to hard-reset without to much hassle seems like the emergency brake I like available to me
At the moment I am trying to reinstall Cookies Home Tab, but the installation just hangs.. Probably because it wasnt uninstalled correctly. Any tips other than Hard Resetting which means several hours of setup
Edit: Ahh f... it.. I may aswell do it.. All the tampering made my phone slow anyway.. Now I know what I need and can get it to work without too much experimenting..
Thanks dude.
I did some research on your stock ROM and it looks like you are running Manila 2.1 which is the older version so many tweaks you are attempting may be for 2.5.
You would be better off changing ROMs.
Here is a download of our stock ROM for warranty purposes, keep it just in case. You may have to register for the site, but you may also find a nice cooked ROM in your language on that site. Dutty is a great chef and I use his ROMs because of their stability.
I can attempt to walk you through HSPL, but there have been many issues lately. Almost seems like the only way to get it to work is to "donate" to the developer.
Okay Mr Dope Pusher.. i see where you are going.. Telling me to stay away from these sheningans and 1 hour later you got me hooked anyway
Jokes aside.. Yes.. I Do think I am gonna need some help here.. While the stock backup rom is downloading I will try and find out for myself, but I would very much like some confirmation on what to do before I take the leap.. Stay tuned and thank you very much.. Your help is very appriciated.
I have a question though.. Now I downloaded the stock rom, but what if my phone breaks when Duttys Rom is installed.. Then I wont be able to reinstall the original rom before sending it in for repair. And then Im screwed warranty wise, right?
..., in anticipation of your next question;
As long as you have over 50% battery and do not interupt the flash (unplug the USB) there are very few chances of it bricking.
I have never had it happen and most errors are correctable with a hard reset. It really sounds worse than it is.
Most devices get bricked because the user attempts to flash a cooked ROM w/o HSPL or a ROM or radio from another device.
I have attached 3 files.
Do the following after you download these files;
1. Remove your SIM and SD card.
2. Sync your device to your PC through Active Sync or WMDC depending on your windows version.
2. Copy the enablenewrapi.cab to your device through file explorer and install
to device memory.
3. Open both the SPL 1.83 and the RUU zip files and place contents of both into a new folder.
4. Run the RUU.exe and you should see a progress screen appear.
5. With any luck, you won't get stuck at 0% and the flash will complete.
As the screen states, it may take up to 10 minutes. You will see your device disconnect from active sync, which is normal. Let it run until it completes and do not open anything or let your PC go into standby. Also, you may want to disable your AV and any firewalls as these can mess with the installation.
Make sure you have greater than 50% battery before you attempt this as any interuption during the flashing process can brick your device.
If the steps above complete, you can go into bootloader mode by holding down both volume keys right after you hit the soft reset buton, but before the device begins to boot. You may have to try a couple of times if you are not fast enough. Or you can power off the device then hold both volume keys and press the power button. In bootloader mode which is a tri colored screen, you should see SPL: 1.83.Olinex, then you will know it has installed correctly.
From this point, you are able to flash any cooked Topaz ROM.
The ROM flashing process is the same as HSPL in regards to placing the ROM's .nbh file into the same folder as the custom RUU.exe, so keep that RUU.exe file for future use.
You need only flash HSPL once to continue to flash as many ROMS as you like.
If you ever have to revert to stock, you would install the ROM you downloaded, then find the StockSPL file from the HSPL thread and follow the instructions.
Always hard reset after you flash a new ROM.
**If you are not successful in flashing HSPL, you will need to go to the HSPL thread and read up on opening a ticket with HTC Support, which will give you an autoinstaller that will work once you donate through the program. I believe they are asking for 4gbp.
Ok.. And one of the above files is the Dutty Rom? Edit: Oh I se.. It isnt.. I will download it then..
Will it look and feel similar to Sense, just with more features and customisation options?
You write: Most devices get bricked because the user attempts to flash a cooked ROM w/o HSPL or a ROM or radio from another device.
Can you please elaborate? I understand it like you need to make sure I install the hspl first before cooking, but "radio" from another device. Please explain it for a dummy as me, so I dont attempt to do it by accident.
came99 said:
Ok.. And one of the above files is the Dutty Rom? Is it available in danish as is, or do I have to do something.
Will it look and feel similar to Sense, just with more features and customization options?
Click to expand...
Click to collapse
No, I have not provided you with a ROM, just the HSPL unlocker.
You can go to HTCPedia and search for a Danish ROM with manila 2.5, or take a look through the ROM development thread and find one from another chef. It should have Sense installed but 2.5 unless it states otherwise. 2.5 has more features and functions and is the most current.
Many ROMs are multilanguage so I believe you select your region language when the ROM first loads. Just look for one that supports DAN. I use WWE (World Wide English) so I am not experienced with multilanguage variations.
Just make sure your HSPL is successful before you attempt to flash a ROM.
If you search hard enough you may even find a ROM with CHT cooked in which will alleviate you from having to install it yourself, but I suspect that your previous install didn't work because your on Sense 2.1
I have never used CHT, but use Max Manila Themes which is just a different mod, but I am thinking about trying CHT.
I'll take a look and see what I can find.
Regarding Radios;
A stock ROM comes with the OS and Radio ROM.
Most cooked ROMs take just the OS and tweak it for best performance, adding programs, removing other useless programs and do not include the radio ROM, therefore you will still have your stock Radio unless you flash a cooked ROM that has included the radio (usually denoted in the title of the ROM by the radio#, i.e. 4.49.25.57 (which is a Topaz radio version)
The only time you can brick is you attempt to install a radio from another device (sometimes they work better) such as a Blackstone radio to a Topaz device unless your SIM is unlocked or attempting to flash a Topaz radio w/o HSPL.
Personally, there are enough Topaz radios posted in the radio thread that I don't need my SIM unlocked to try others.
Symptoms of a problem radio are poor signal strength, rapid battery loss and your device heating up.
I have switched my radio ROM a few times but honestly haven't noticed a difference from my stock radio.
The stock ROM you downloaded would replace your Stock Radio if you happen to flash to a different one.
Your region and carrier are also a factor in choosing a radio, so again, just stick to stock unless you have issues.
Dude.. That radio thingie made me EXTREMELY paranoid and I see that there is dozens of different roms from dutty and thousands of rom in general where many of them seems to come with radio-thingies... I am extremely afraid of choosing something that will brick my system, so please, please help me through this, even though you already have been extremely helpful.
If I were on my own, I would go with this:
http://htcpedia.com/duttys_topaz_wm_leo_r_rtm_e11d19c3e22de899a/soft/htc-topaz-rom.html
But to be honest I dont know if it will work on my device or if I will be able to get it with a danish language pack..
Please help me choose the right one.... I am ready to rock, so I hope for a quick reply, and I promise I will do a extra good deed tomorrow to repay the world for all the help you gave me tonight.
came99 said:
Dude.. That radio thingie made me ETREMELY paranoid and I see that there is dozens of different roms from dutty and thousands of rom aswell where many of them seems to come with radio-thingies... I am extremely afraid of choosing something that will brick my system, so please, please help me through this, even though you already have been extremely helpful.
If I were on my own, I would go with this:
http://htcpedia.com/duttys_topaz_wm_leo_r_rtm_e11d19c3e22de899a/soft/htc-topaz-rom.html
But to be honest I dont know if it will work on my device or if I will be able to get it with a danish language pack..
Please help me choose the right one.... I am ready to rock, so I hope for a quick reply.
Click to expand...
Click to collapse
Don't sweat it Bro, if its posted as a Topaz ROM then its got the Topaz Radio, the only thing you risk is not being able to connect to certain 3G bands.
I've used Dutty's R-8 and its not a bad ROM, but its a little outdated and I didn't see that it had multi language support.
I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????
"I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????"
Then it aint just me being total clueless.. I cant find any either..
Im bafled by this world.. I basically have two modest demands: To record calls in mp3 and get easy access to my to-do list.. preferably on my homescreen, but just as good by one of the nifty Hotbuttons Ive seen in pictures..
To get those two modest demands fulfilled I either:
- Need to give up on my danish interface and crack my phone beyond warranty and a chance of bricking it.
- Disable HTC sense and go with WM interface
I know how limited I would be with any other phone, but this road I got myself on is really amazing
came99 said:
"I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????"
Then it aint just me being total clueless.. I cant find any either..
Im bafled by this world.. I basically have two modest demands: To record calls in mp3 and get easy access to my to-do list.. preferably on my homescreen, but just as good by one of the nifty Hotbuttons Ive seen in pictures..
To get those two modest demands fulfilled I either:
- Need to give up on my danish interface and crack my phone beyond warranty and a chance of bricking it.
- Disable HTC sense and go with WM interface
I know how limited I would be with any other phone, but this road I got myself on is really amazing
Click to expand...
Click to collapse
I found some Danish support threads, just search Danish Topaz in XDA and you may find something to load over a WWE rom.
Personnaly I think you will be disappointed if you do not take the plunge.
I had a Rhodium before my Topaz and once I go tmy Topaz, I couldn't stand it. It wouldn't do half the **** my Rhodium did. Because I had my Rhodium flashed to custom.
Finally HSPL was released and I flashed it immediately and can't believe I ever liked that other brick of a phone.
Take your time, get comfy with the process first, and read lots on the language packs.
The brick warning is just a disclaimer and it is very difficult to achieve if you follow the steps correctly.
I know these are expensive toys to take a chance on, but they really are only at 50% capacity out of the box. What a waste....
Bruce, dude, you're a saint. This is why so many folks look to xda for help. You should be commended, but probably won't be! You got my vote.
jdwilson said:
Bruce, dude, you're a saint. This is why so many folks look to xda for help. You should be commended, but probably won't be! You got my vote.
Click to expand...
Click to collapse
Thanks JD!
Is that commended or condemed???
Just trying to give a little back.
Greetz from SoCal.
I agree.. The helpfulnes here has been overwhelming, and has given me the bravery to try this out. But I am still very nervous.
Let me sum up what I learned from tonight.
1) When following your instructions I will have a phone which I can modify with custom roms.
2) As long as I am 100 % sure the rom is for Topaz I dont have to worry about messing up and bricking my phone due to doing wrong stuff to the radio-thingie? (yes, I still dont understand what that is)
3) I will be able to get back to factory defaults and warranty by installing the official rom you linked and afterwards install the original spl thingie afterwards?
4) Should I mess up and brick my phone, there is a fair chance of being able to restore it by the help of another device and a micro SD-card? (See I DO try and learn myself.. (Its probably incorrect though ))
5) I need to give up on the danish interface, but I will without too much hassle be able to get a danish keyboard?
6) To be absolutely sure not choosing a wrong ROM, please confirm this one as a possible choice: "Duttys Topaz HG R10 [5.2.23541.5.5.0]"
It is downloading and I am ready to take the leap... Geronimoooo!
came99 said:
I agree.. The helpfulnes here has been overwhelming, and has given me the bravery to try this out. But I am still very nervous.
Let me sum up what I learned from tonight.
1) When following your instructions I will have a phone which I can modify with custom roms.
Yes
2) As long as I am 100 % sure the rom is for Topaz I dont have to worry about messing up and bricking my phone due to doing wrong stuff to the radio-thingie? (yes, I still dont understand what that is)
Radio controls cell signal, GPS and WiFi connections.
3) I will be able to get back to factory defaults and warranty by installing the official rom you linked and afterwards install the original spl thingie afterwards?
Yes
4) Should I mess up and brick my phone, there is a fair chance of being able to restore it by the help of another device and a micro SD-card? (See I DO try and learn myself.. (Its probably incorrect though ))
Exactly.
5) I need to give up on the danish interface, but I will without too much hassle be able to get a danish keyboard?
Bingo!
6) To be absolutely sure not choosing a wrong ROM, please confirm this one as a possible choice: "Duttys Topaz HG R10 [5.2.23541.5.5.0]"
That's the one I am currently running. Great ROM!
It is downloading and I am ready to take the leap... Geronimoooo!
Click to expand...
Click to collapse
I'm usually not on the forum as much on the weekends but if you get stuck, shoot me a PM which will notify my e-mail and I'll see if I can help.
I take it you were successful with HSPL? If so, thats most of the battle!
Peace!
"5. With any luck, you won't get stuck at 0% and the flash will complete."
Well... Guess what...
Can someone please help.. Im stucked here and having a stroke.
Edit: Tried on 2 different computers and its the same: Stuck on 0 %.. Antivirus disabled.

Help me for updating ROM for HTC Touch HD

Hi,
I'm using HTC TOUCH HD (orange). I bought this handset from Scotland it was locked with orange only but i Unlocked this handset in india and now i'm using this handset with vodafone India.
Now this handset works gr8 for me but still i can see some settings are map with orange only. I heard if i update with international English ROM then my problem will get solved.
I have no idea about updating ROM. I read lots of blogs even i read on xda wiki also but not sure as its looks like if i update my ROM then i may lose my original ROM.
I have few question:
1. How to choose correct ROM for my handset.
2. Which is the right tool to take the Device backup.
3. If i'm unable to update with new ROM then will i lose my Original ROM.
Hereby i'm sending you my current ROM Version and release date
Current ROM Version: 1.1961.1 WWE
Operator Version: 34.119.1.611
ROM Date: 11/25/08
Radio Version: 1.09.25.14
Protocol Version: 52.49a.25.26U
Your help will be highly appreciate.
Thanks in advance.
I suggest not doing it. If you can't read and search, then you can't flash a ROM.
hey dear. i also got my handset from UK with locked with orange. If u want to upgrade simply go for Cooked ROM's. Those original rom's are crap and cant use the full potential of ur handset.
I would suggest u go for Energy sense 2.1 21898 version.
u need to do just few things in order to flash a cooked rom. if u r ready then do let me know
the best way to take a backup is using PIM backup software
re ur 3rd question. once u flash a cooked rom u will never want to go back to ur original stock rom.
send me a pm whenever u r ready and confident to flash ur phone
apatni said:
Hi,
I'm using HTC TOUCH HD (orange). I bought this handset from Scotland it was locked with orange only but i Unlocked this handset in india and now i'm using this handset with vodafone India.
Now this handset works gr8 for me but still i can see some settings are map with orange only. I heard if i update with international English ROM then my problem will get solved.
I have no idea about updating ROM. I read lots of blogs even i read on xda wiki also but not sure as its looks like if i update my ROM then i may lose my original ROM.
I have few question:
1. How to choose correct ROM for my handset.
2. Which is the right tool to take the Device backup.
3. If i'm unable to update with new ROM then will i lose my Original ROM.
Hereby i'm sending you my current ROM Version and release date
Current ROM Version: 1.1961.1 WWE
Operator Version: 34.119.1.611
ROM Date: 11/25/08
Radio Version: 1.09.25.14
Protocol Version: 52.49a.25.26U
Your help will be highly appreciate.
Thanks in advance.
Click to expand...
Click to collapse
it is a real simple process and once u do it u wont fear flashing it again & again
sorry for late reply Thank you so much for ur positive reply.
Could you please let me know from where i can get the currect ROM for my handset?
also please tell me who u did it with ur HTC TOUCH HD and does and don't if you have something before flashing ROM.
OK I have some time so let me try to put it as simple as I can.
First, there are 3 firmwares:
SPL -- This needs to be hacked to be able to change to any ROM
ROM -- You have the HTC official one and cooked ones
RADIO: you have 1.09, lastest are 1.13 / 1.14 / 1.17
The safest way is to use USPL, since it does not modify the SPL. You can always flash a ROM again.
See: http://forum.xda-developers.com/showthread.php?t=462347
Download uspl_2.5.zip
Be aware that some antivirus flag the exe as dangerous, but that's because it contains an exploit for a buffer overflow.
If you're using Vista or 7, you need to change the drivers for HTC USB sync as explained on http://forum.xda-developers.com/showthread.php?t=291723.
Now power off the phone (long press power button)
Press volume down on the side, and power button
That should leave it in the Red/Green/Blue/White screen
Now connect it to the PC and run USPL
It should reboot and go back to the Red/Green/Blue/White screen but now it says USPL
The phone is ready to flash any ROM or any radio now.
Official HTC ROMs here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
is the last one on the web, it works fine. Does not have the lastest versions of everything but it works fine.
In the forum you have links to many cooked ROMs, based on Windows Mobile 6.1 and 6.5. WM 6.5 takes more RAM and it's slower than 6.1 (like Vista and XP). But most ROMs today are WM 6.5.
I have been used these two in the last months:
http://forum.xda-developers.com/showthread.php?t=460640
http://forum.xda-developers.com/showthread.php?t=648831
The recomendation is to flash the HTC stock ROM first (that will also update the RADIO to 1.13.25.24). Then if you want to experiment, you can flash a cooked ROM.
Well,
My opinion: once you are addicted to ROM, I think HSPL would be the best way.
You can flash a ROM within 5 minutes or less. Also, using task29 is even more easier.
Cheers, my friend.
vcespon said:
If you're using Vista or 7, you need to change the drivers for HTC USB sync as explained on http://forum.xda-developers.com/showthread.php?t=291723.
Click to expand...
Click to collapse
Could somebody tell me in an easy way how to do this? And when do i do it? Do i have to install the old drivers again after flashing? Where can i find the drivers to use, i use windows 7 32 bit
Thank you from Forca
wow you make it very easy for me now this weekend i'm gonna try all this.
I really appreciate your effort to explain me in details. I think its quite easy to do.
vcespon said:
OK I have some time so let me try to put it as simple as I can.
First, there are 3 firmwares:
SPL -- This needs to be hacked to be able to change to any ROM
ROM -- You have the HTC official one and cooked ones
RADIO: you have 1.09, lastest are 1.13 / 1.14 / 1.17
The safest way is to use USPL, since it does not modify the SPL. You can always flash a ROM again.
See: http://forum.xda-developers.com/showthread.php?t=462347
Download uspl_2.5.zip
Be aware that some antivirus flag the exe as dangerous, but that's because it contains an exploit for a buffer overflow.
If you're using Vista or 7, you need to change the drivers for HTC USB sync as explained on http://forum.xda-developers.com/showthread.php?t=291723.
Now power off the phone (long press power button)
Press volume down on the side, and power button
That should leave it in the Red/Green/Blue/White screen
Now connect it to the PC and run USPL
It should reboot and go back to the Red/Green/Blue/White screen but now it says USPL
The phone is ready to flash any ROM or any radio now.
Official HTC ROMs here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
is the last one on the web, it works fine. Does not have the lastest versions of everything but it works fine.
In the forum you have links to many cooked ROMs, based on Windows Mobile 6.1 and 6.5. WM 6.5 takes more RAM and it's slower than 6.1 (like Vista and XP). But most ROMs today are WM 6.5.
I have been used these two in the last months:
http://forum.xda-developers.com/showthread.php?t=460640
http://forum.xda-developers.com/showthread.php?t=648831
The recomendation is to flash the HTC stock ROM first (that will also update the RADIO to 1.13.25.24). Then if you want to experiment, you can flash a cooked ROM.
Click to expand...
Click to collapse
By the way, I'm back to Topix 3.5 WM6.1 Manila 2.1.
The difference in speed with a WM 6.5 ROM is too big. People should really consider give this one a try and see what I mean. On WM 6.5 even typing in keyboard is slow. Here you start with 37% RAM used, not 52%. And while using Opera, you have 55% RAM used, not 80%.
No way I'm going back to WM 6.5.
ok, I'm closing this thread now. In future could everyone direct users looking for flashing help to this thread.
Thread closed

Categories

Resources