ive searched and searched but i havent found how to do it. itz not as simple as renameing it RHODIMG.nbh please help because i own a mac and i cant open exe files or active sync
Related
yesterday I came across a page which gave two methods to upgrade a treo 750 (or similar from memory) rom, one method was using a sd card and the other was using the computer in some way, I unfortunately cannot now find that page again
currently running Cingular WM5 I'm trying to upgrade to WM6 vodafone, sim is locked (was planning to unlock after upgrade (bad idea?))
in my searches I came across XDAtools but that does not seem to work for me (says something about cannot establish a serial connection) and the built in installer in the exe will not work
I only have a 4gig SDHC card so do not believe I would be able to upgrade
using the sd card method (though have not tried)
mostly I am hoping someone here knows of the page, it talks about two methods
it was probably on XDA and probably the wiki, maybe the forum, though its possible it was on a treo forum, I cannot access the computer I used
alternatively if you know of other ways to upgrade using the usb cable that information would be much appreciated
lastly if this question has been asked again and again and again I am sorry, my searches of this forum and the wiki have not turned up what I am looking for as far as I can find
SD Update
You need to have a miniSD card formatted FAT32 and the card must not be HC. Copy your .nbh file to the card and rename it cheeimg.nbh. Insert the card into your Cheetah and put it into bootloader mode by holding down the media key and depressing the reset. the update process is displayed.
I downloaded TomTom Home (both versions that are available) and tried each to connect to the Kaiser with TomTom 6.xx installed. Nothing happens. It refuses to notice the Kaiser connected.
I've tried it with the PDA connected before and after running TomTom Home. I tried it with TomTom 6 active or not active. I can't install any maps because of this. Can anyone help me?
You need to install Tomtom on an SD card, and then you need to put the SD card in an external reader connected to the PC in order for TTHome detect the installation.
It's on an SD Card. I had it in an external card reader just now but nothing changed. I searched in the TomTom support department where it seemed to be suggested that I had to download a bunch of XML files in a ZIP file and store them on the device main directory (which I took to mean "SD Card root directory"). That didn't help, either.
Hm...it's not on the SD Card. The CAB file was executed from the SD Card but WM never asks me where to install...and throws it into main memory. How to alter that behaviour?
Worked fine for me (USA) upon opening it gave a could not connect error, but when I selected ok and then clicked on the icons in the main window that say My Device, it asked me to choose my device and it had the Kaiser listed as an option. Not sure if roms make any difference but I'm running Dutty's latest 6.1.
all the cabs and programs I've uploaded from here all say "The file _______ cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file." Now I understand what it says, but I havent moved, edited, or deleted any files/folders off my device. I'm going to reinstall all of it, but anyone have any idea why this would happen?
LOWbikes4130 said:
all the cabs and programs I've uploaded from here all say "The file _______ cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file." Now I understand what it says, but I havent moved, edited, or deleted any files/folders off my device. I'm going to reinstall all of it, but anyone have any idea why this would happen?
Click to expand...
Click to collapse
Did you install them to the SD card? Have you looked to see if they're installed? Most programs install to (root)\Program Files where (root) is the device or the SD card.
I suspect you installed them to the SD card and the SD card has a problem.
That, or you uninstalled several programs in a row and ran into the bug I see all the time where it doesn't remove what you expect it to, but in that case you wouldn't have shortcuts in the start menu (but you certainly could in other programs where you set it yourself).
There is a setting in Advanced Config to automaticly delete cabs after beeing installed, have you checked this?
i havent, but I'm glad I still had the cabs on my device as I just reinstalled them. If they werent on there, I would had needed to find them again...
This problem drove me crazy for two weeks. I decided to try to copy the contents of the SD card to my hard drive and then reformat the card.
While copying the SD card, I kept getting an error. I eventually figured out the Program files folder on the card has some corrupted files or folders.
I copied everything except the Program Files folder to my hard drive, reformatted the card, copied everything back to the SD card and reinstalled the cabs.
PJBHermes said:
This problem drove me crazy for two weeks. I decided to try to copy the contents of the SD card to my hard drive and then reformat the card.
While copying the SD card, I kept getting an error. I eventually figured out the Program files folder on the card has some corrupted files or folders.
I copied everything except the Program Files folder to my hard drive, reformatted the card, copied everything back to the SD card and reinstalled the cabs.
Click to expand...
Click to collapse
I have had this too. Twice in fact.
First time it was the My Documents folder of the SD card. Just a few days ago, the Program Files folder was affected. Soluation was to open the SD card directly from the PC thro the SD card slot, recover the files and reformat/ copy.
Lesson learnt: Always keep a copy of important SD card contents on your PC/laptop. I do, now. At 8GB, it doesn't matter much on my laptop.
Can anyone tell me how to copy .nbh file to root of SDcard pls? I click on kovsimg.nbh file than copy than i click in my computer to my portal device than right click on storage card and paste.But in boot menu still no image find :s . can anyone explain me how to copy in root of SDcard pls?
thank you
Take a look at this, read point 2.a
If you find it useful, please click thanks button.
when you connect your phone to the PC check choose connect type "Disk Drive" instead of "ActiveSync"
now you will see the sd card as a separate folder in your explorer/total commander/file manager and can easily organize/copy/move files and folders on the card and between PC and phone w/o any format conversion (that you suffer when copying files in activesync mode)
Best, DK
I searched the forums but could'nt find a similar problem. My SD card is read by my phone. But when i connect it to the computer through USB storage, only a few folders are seen(lost.dir, buildprop.tmp, .profig.os) along with any new folders that i create. But while browsing the card through a file explorer on my phone i can see all the files and folders. Anyone know what's wrong??
Try to put it in a card reader and see what happends.
Hey
I bought a sd card from eBay and had countless errors and trouble with it, I bought a new sd and had no issue what so ever. So try a new sd card or even formatt the memory card
Sent from my HTC Incredible S using xda app-developers app
See if you can back the contents up to the pc then run disk check or format.
Formatting at the moment is not an option. I have a lot of data on it that needs to be backed up like photos, videos, music etc. Unfortunately i cant backup the contents onto the PC since they cant be seen! Guess i have to upload everything onto dropbox and then format it. And with my current upload speed its going to take days . Unless there's someother way of doing it
Try doing a backup using a card reader for your pc.
Even with a card Reader only the "New" folders that i create can be seen. But on the phone All the folders can be seen.
Have you tried to connect it with Linux based OS or only with Windows?
Try this also. Currently there's a troyan round the globe. When it activates it hides all the folders on external media devices connected to PC, and creates .exe files with names of hidden folders. When you connect your storage to a PC with good antivirus it deletes .exe files but leaves folders on storage in hidden state. Try to configure your Windows Explorer or Total Commander to show hidden files and folders and maybe you'll be lucky.
Only with Windows XP and 7 based systems as im at a cousin's place. Found this problem when he wanted some songs from my card. I did scan the SD card using AVG. During the scan i noticed that the current files being scanned included those that i couldn't see using windows/commander file explorer. Hope that helps
Edit: A little messing around and i got it!! Folder Options > Hidden Files and Folders > Unchecked "Hide Protected Operating System Files"
Thank you for all your help