hey guys, i have a problem with my x1 where it wouldnt start up. It would just go to the tri boot screen and once it does, it ask for an upgrade and then turns off by itself. It would only let me press the power key to upgrade, but once i do it resets and a red light would flash. I tried hard reseting it and syncing to get back to the original rom because i am using a custom rom. I been using this custom rom for many months and had no problem with it. please help guys
please and thank you in advance.
Did you make sure you had AT LEAST 50% battery power? To be safe, you might want to let your phone charge for awhile before attempting to power the phone back on and resuming your task.
phatboy1991 said:
hey guys, i have a problem with my x1 where it wouldnt start up. It would just go to the tri boot screen and once it does, it ask for an upgrade and then turns off by itself. It would only let me press the power key to upgrade, but once i do it resets and a red light would flash. I tried hard reseting it and syncing to get back to the original rom because i am using a custom rom. I been using this custom rom for many months and had no problem with it. please help guys
please and thank you in advance.
Click to expand...
Click to collapse
find any friend who has X1 charge battery full and than try to flash using Micro SD mthod.
on my X1 was problem like that but i flash
about 3 times there was same problem but when i try it again i was ok.
sorry for my bad english. hope u anderstand what i mean.
firs charge your battery full for safe your X1.
Im Packing said:
Did you make sure you had AT LEAST 50% battery power? To be safe, you might want to let your phone charge for awhile before attempting to power the phone back on and resuming your task.
Click to expand...
Click to collapse
i charged it over night, and it still didnt work. ill try it again to make sure. hope it works.
phatboy1991 said:
i charged it over night, and it still didnt work. ill try it again to make sure. hope it works.
Click to expand...
Click to collapse
You flashed rom via data link cable, Did't you?
If Battery empty while flashing rom, now you have a big problem.
You need MTTY to re-alive your X1.
Follow this forums ; How to resolve when has accident while updating ROM.
http://forum.xda-developers.com/showthread.php?t=371154
PS. Flash by using Micro SD method is the best.
chow-doii said:
You flashed rom via data link cable, Did't you?
If Battery empty while flashing rom, now you have a big problem.
You need MTTY to re-alive your X1.
Follow this forums ; How to resolve when has accident while updating ROM.
PS. Flash by using Micro SD method is the best.
Click to expand...
Click to collapse
thnx, i will try this as tomorrow when my x1 finish charging.
so i tried the MTTY and its not working. I did all the steps like closing the rapimgr.exe and wcescomm.exe, but the WCEUSBSH001 isnt showing up. I cant get my x1 to turn on when i want it to. it just starts up by itself and when it does it goes to the boot mode and saids KOVSING.nbh- and ask for an upgrade. Am i doing something wrong? please help
Related
Hello,
What is the worse thing that can happen during a upgrade ? Yes a powerfailure and it happend to me !!!
The result: Nothing works anymore. When I press the power button on my QTek9090, nothing happens !!! When I put it in the cradle only the red led turns on and active sync says: no device connected even if I try manually.
Anyone Any solution or can I trow my PDA in the bin ?!?
I'm open for any suggestions
try to hard reset...
AddAn
error upgrading, BIG problem !?!?!?!?! reset
Hello Addan,
I tried all resetting methodes found here. Nothing works
MeItIs said:
Hello Addan,
I tried all resetting methodes found here. Nothing works
Click to expand...
Click to collapse
Don't worry. I used a GSM rom on my CDMA phone, then nothing worked. Even all type of reset, they did not work. Just find out a correct ROM to reflash it, then should be fine. Now my phone has 90% of function recovery
MeItIs said:
Hello,
What is the worse thing that can happen during a upgrade ? Yes a powerfailure and it happend to me !!!
The result: Nothing works anymore. When I press the power button on my QTek9090, nothing happens !!! When I put it in the cradle only the red led turns on and active sync says: no device connected even if I try manually.
Anyone Any solution or can I trow my PDA in the bin ?!?
I'm open for any suggestions
Click to expand...
Click to collapse
I suggest you to take out the battery out for quite sometime, let the backup battery die. Power it up later on and follow flashing procedure again.
It is always suggested to use Laptop for upgrading as they dont get affected by power shutdown for short time.
Hello Folks,
I tried all suggested til now. I took out the battery for more than a week but the problem is (and was) that I couldn't get a connection anymore with the Qtek thru activesync 4.5.0
The device isn't seen by the computer. Not even when I say activsync to connect to a device.
Still open for more suggestions
qtek doesnt do anyting
if your qtek doesnt doe anything any more try giting it in to bootloader mode and the try to reflash it if you cant get in to bootloader mode your device is nearly finished and you cant do anything more with it the return it to qtek and let them put a new flash chip in it
or get your hand on a new flash chip and a good manual of getting it opend and let someone who can reather good solder solder the old flash chip out of your device and let him put the new one in it and your device must be okaey after that and you can havefun with your device and the when you upgrade you qtek do it eith a laptop because laptops have an battarey that is capebale of work for 1 hour when the power is down or with a traffel battarey it can work on full loaden one for 3,5 hours
Obviously did something wrong in the ROM upgrade. I was trying to install Hard SPL, and it said it wasn't compatible with my phone's SW version - and now it won't switch on, which I find odd. Any ideas?
Have you tried to flash an original ROM already?
EDIT: That won't do if you can't switch your Diamond on.....
I have the Same problem .
Do you try Volume down + reset to go to bootloader ?
That's the problem when you don't have an SD card port. If the hard reset doesn't help, I guess that the solution would be to use something like mtty.
solution
Hi everybody! never give up, you can always repair it: try to find your original rom, connect your diamond to your computer, put it in bootloader and lunch rom update utility. Normaly it will work, i repared my last elfin doing that.
tell me if it work!
regards
it won't turn on at all
soop said:
it won't turn on at all
Click to expand...
Click to collapse
Ive not had this problem after a rom upgrade because I havent done one but I did have a problem where something boofed and it wouldnt turn on and I had to remove the battery and sim card and re-insert for it to turn on...maybe worth a try...
Bootloader
soop said:
it won't turn on at all
Click to expand...
Click to collapse
Neither the bootloader works?
take the battery out for 30 sec, put it back, press volume down + power button and press with you stylus reset. If it goes in Boot loader Connect it to your USB and load the new rom!
Hope that helps!
neilsupermac999 said:
Ive not had this problem after a rom upgrade because I havent done one but I did have a problem where something boofed and it wouldnt turn on and I had to remove the battery and sim card and re-insert for it to turn on...maybe worth a try...
Click to expand...
Click to collapse
yup!i try tat on a elf before,it works but not sure about TD
1: I cannot flash my X1 using any methods! see this link
2: When the X1 is on and i'm trying to turn the screen on, i'm pressing the power button but the Dialpad and Calendar will automaticly comes up it's just like i'm pressing dial and left silver button together with power button
3. I think that's why my vol down+power button is not working as well as silver buttons when trying to hard reset!
Please help me, it's not even a long time that i'm using it!
(sorry for my bad english)
Have you tried flashing by USB method instead of Via Memory Card?
sorry, dont funny to read the thread, so this question could be known by you.
did you turned off your phone by long pressing the off button?
the second way is a little bit tricky:
push reset .. than (no longer than 0,5 seconds) off + vol_down until vibration comes and tree-color-screen.
it works too after taking battery out and than back. but more time for pushing off +vol_down.
okokur said:
sorry, dont funny to read the thread, so this question could be known by you.
did you turned off your phone by long pressing the off button?
the second way is a little bit tricky:
push reset .. than (no longer than 0,5 seconds) off + vol_down until vibration comes and tree-color-screen.
it works too after taking battery out and than back. but more time for pushing off +vol_down.
Click to expand...
Click to collapse
dude? whats up man? dint u go to school?
'dint' you?
Strange this is the second person claiming about the same stuff... anyway... take out memory and try hard reset.
I did everything!!! Nothing helped!
I'm going to flash it back to stock ROM. i donno if i can
i had the same problem...[after a LITTLE cola damage ]
i contacted the sony ericsson support and they repaired me my x1 [switched a key] even their was set a custom rom...
"if the problem is caused by the custom rom you have to pay 25€ for setting an original rom otherwise we will repair it on guarantee"
so the best thing is to tell the hotline what you´ve already tried and send it to x1 support center...
the german firma "becker&partner" was realy fast...after 3-4 days i´ve got my x1 back
doesn´t know where you are living/how fast the x1 support is in other countries
ANy updates about the problem? Have u been able to re-flash your stock rom back?
jhendra said:
ANy updates about the problem? Have u been able to re-flash your stock rom back?
Click to expand...
Click to collapse
No
I cannot even back to my original rom/spl to get it for warranty
What should I do?
isp_85 said:
No
I cannot even back to my original rom/spl to get it for warranty
What should I do?
Click to expand...
Click to collapse
did u try hard reset without sd in?
wazaaappp said:
did u try hard reset without sd in?
Click to expand...
Click to collapse
yes! i did
isp_85 said:
yes! i did
Click to expand...
Click to collapse
Now I have the same problem with my second xperia (even newer) I've done everything possible I guess... :S I'll try to record a video to show everybody what is this all about, and if anyone knows the solution... so now we are two
wazaaappp said:
Now I have the same problem with my second xperia (even newer) I've done everything possible I guess... :S I'll try to record a video to show everybody what is this all about, and if anyone knows the solution... so now we are two
Click to expand...
Click to collapse
Yes!!!
Help!!!!!!!!!!!!!!!!!!!!
Hi Wraaaaap and ISP! Today i had the problem num 262 when trying reflash stock bios, and I found the way that don't need to press power + vol down buttons. maybe it might works for U guy. But firstly, your phone have to normally start up, and can access to windowns screen. And then, go to this page http://forum.xda-developers.com/showthread.php?t=431218 follow instruction in order to flash bios again. If Ur phone have 0.72.OliNex (or 0.52.OliNex MFG) U should flash it back to stock bios? Before reflashing bios, take off SD card, copy stock ROM to SD card and remane it to Kovsimg.nbh, put back to the phone...Start flash. and vice-versa if ur phone's bios is tock one. Hope it will help U
kanchigo said:
Hi Wraaaaap and ISP! Today i had the problem num 262 when trying reflash stock bios, and I found the way that don't need to press power + vol down buttons. maybe it might works for U guy. But firstly, your phone have to normally start up, and can access to windowns screen. And then, go to this page http://forum.xda-developers.com/showthread.php?t=431218 follow instruction in order to flash bios again. If Ur phone have 0.72.OliNex (or 0.52.OliNex MFG) U should flash it back to stock bios? Before reflashing bios, take off SD card, copy stock ROM to SD card and remane it to Kovsimg.nbh, put back to the phone...Start flash. and vice-versa if ur phone's bios is tock one. Hope it will help U
Click to expand...
Click to collapse
can't do it. can't flash anything
wazaaappp said:
can't do it. can't flash anything
Click to expand...
Click to collapse
can ur phone start normally? I mean, winmo in ur phone still ok?
kanchigo said:
can ur phone start normally? I mean, winmo in ur phone still ok?
Click to expand...
Click to collapse
nope mate, I just turn it on and starts the bootloader... I'm uploading a video to judge by urselves, I'm doing everything possible but can't get it !
wazaaappp said:
nope mate, I just turn it on and starts the bootloader... I'm uploading a video to judge by urselves, I'm doing everything possible but can't get it !
Click to expand...
Click to collapse
if ur phone stops at silver screen, shows "loading..." so u take off SD card and copy ROm in there (if stock bios so copy stock ROM or 0.72 so copy any cooked Rom) rename ROM to Kovsimg, put the card back to the phone, take off battery and start again. It might work.
don't need to press anything, just power button one time.
kanchigo said:
if ur phone stops at silver screen, shows "loading..." so u take off SD card and copy ROm in there (if stock bios so copy stock ROM or 0.72 so copy any cooked Rom) rename ROM to Kovsimg, put the card back to the phone, take off battery and start again. It might work.
don't need to press anything, just power button one time.
Click to expand...
Click to collapse
hoho thanks m9 for ur help but as I said, I've done everything which is in my mind, that was the first thing I did ... no success though
just baught it, it worked fine.. then i tried to install HARD SPL, my computer froze and restarted.. i tried to do it again.. did the same..
so then i tredi to install a rom ( probs a stupid idea).. it loaded up to 100% then told me the rom was corrupt! and it refused to get out of the triband bootloader screen!.. i tried to hardreset it.. stayed in bootloader screen.. tried doing hardSPL again.. gave me erros, and asked me to do a recovery.. didn;t work.. tried to re-flash the rom.. no luck..
then i tried mtty, followed the commands given.. this time it reset and got to the roms loading screen.. but doe snot load past there..
now.. it wont detect USB wont load... nothing.. hard reset doesn;t work..
wheni connect usb cable it comes up with an orange light..
PLEASE !HELP!!!! :'( :'(
What OS are you running?
I had to use XP to unlock my phone. If all else fails, you should have a 1 year manufactures warranty on the phone. Just call them and say this thing 'just stopped working' and cross your fingers.
running xp.. the warranty it void... if anyone has any idea.. PLEASE HELP!! :'(
http://forum.xda-developers.com/showthread.php?t=423486
wish you a good luck!
I can't help you ,
wish you!
ardley216 said:
just baught it, it worked fine.. then i tried to install HARD SPL, my computer froze and restarted.. i tried to do it again.. did the same..
so then i tredi to install a rom ( probs a stupid idea).. it loaded up to 100% then told me the rom was corrupt! and it refused to get out of the triband bootloader screen!.. i tried to hardreset it.. stayed in bootloader screen.. tried doing hardSPL again.. gave me erros, and asked me to do a recovery.. didn;t work.. tried to re-flash the rom.. no luck..
then i tried mtty, followed the commands given.. this time it reset and got to the roms loading screen.. but doe snot load past there..
now.. it wont detect USB wont load... nothing.. hard reset doesn;t work..
wheni connect usb cable it comes up with an orange light..
PLEASE !HELP!!!! :'( :'(
Click to expand...
Click to collapse
You are first going to have to determine if your phone is truly unlocked.
I am not sure that you phone is bricked. But it does sound like you are going to have to be creative to undo what you have done. If you are able I would suggest flashing hardSPL via SD. Please go here: http://forum.xda-developers.com/showthread.php?t=433835
ok i'll try this now.. can someone tell me what i need to do after this if it fails??? desperate here ..
thanks so far!!
ardley216 said:
ok i'll try this now.. can someone tell me what i need to do after this if it fails??? desperate here ..
thanks so far!!
Click to expand...
Click to collapse
One step at a time. You might have to get a card reader to load the microsd, they make adapters for them to fit a standard SD slot, plug it into your USB and load into it.
yeah.. i happened to lose my adapter as soon as i need it.. i have a hermes. can i run the software through that???
thanks
ardley216 said:
yeah.. i happened to lose my adapter as soon as i need it.. i have a hermes. can i run the software through that???
thanks
Click to expand...
Click to collapse
you should be able to load the software onto your SD card via the hermes. Once have done this you can then move the SD card over to your tilt and go from there. It's very important that you take your time and read the instructions. This is one time that you dont want to rush through them.
ok so i tried to follow the microSD card flashing method.. i dragged and droped the nbh file ( it was renamed) to the card.. put it in my kaiser.. held power button and camera button.. went to the tri coloured screen for about 2 seonds now its got a white screen just saying "Loading..." does this just mean its loading the rom??
thanks
an hour and half later.. still the same screen... is this phone bricked...?
ardley216 said:
an hour and half later.. still the same screen... is this phone bricked...?
Click to expand...
Click to collapse
ITS NOT BRICKED!!! If you are seeing any screen at all it is not bricked. if the rom is not flashing or having trouble, double check the hardspl. And lastly, when was the last time you wiped?
I've searched and asked for help for months and I can't find anything.
My Sprint Touch Diamond is F'd. I tried flashing an unofficial ROM to it, and on the reboot process, it won't turn back on. In fact, it constantly resets...every time I turn it on, or even placing it on the charger it will turn itself on and keep resetting.
I need to know if it's bricked or if there is anyway of getting it to work again. Someone please please please help, im pretty desperate for advice. Thanks in advance.
Did you install the HardspL? Anyways try to hold down the volume down button and the power button while you push the reset button. If it brings you to a multi-colored screen connect it to the USB and flash another Rom. Make sue it is a CDMA if your phone is CDMA.
Yeah, if you can get it into bootloader you should be able to reflash the shipped rom from your carrier. Use the exe. I would flash it at least twice.
i believe its cdma. it was brand new from sprint.
Lawler said:
I've searched and asked for help for months and I can't find anything.
My Sprint Touch Diamond is F'd. I tried flashing an unofficial ROM to it, and on the reboot process, it won't turn back on. In fact, it constantly resets...every time I turn it on, or even placing it on the charger it will turn itself on and keep resetting.
I need to know if it's bricked or if there is anyway of getting it to work again. Someone please please please help, im pretty desperate for advice. Thanks in advance.
Click to expand...
Click to collapse
Hi Lawler read this first >>> Click Here
Then Here >>> Click Here
HTC Stock Rom >>> Click Here
If you can get into bootloader mode(press vol down + power)until you see the tricolor bars then you're ok you can either flash the stock rom or unlock it then install a custom rom.
HTH
ive searched these forums for an answer for months and have found nothing, It wont go past the boot screen. Ive tried about ten different roms, which have worked before. Hard reset doesn't do anything, and MTTY is a joke. I am willing to pay anyone who can help me get this thing working, im a desperate man at the moment!
ive searched these forums for an answer for months and have found nothing, It wont go past the boot screen. Ive tried about ten different roms, which have worked before. Hard reset doesn't do anything, and MTTY is a joke. I am willing to pay anyone who can help me get this thing working, im a desperate man at the moment!
Click to expand...
Click to collapse
Can you get it into the bootloader? If you cant then your probably out of luck. If you can, flash HSPL, unlock your phone, and flash a ROM.
Sent from my XDANDROID using the XDA mobile application powered by Tapatalk
Yes, it goes into the bootloader. I've flashed a hard spl, it's unlocked. I just tried your rom that makes 12 that I've tried. The same thing happens. The phone turns on to the Touch DIAMOND screen with the red rom info on the bottom and it will not go any farther. Hard resetting does the same thing. I've tried using MTTY, I've tried stock sprint roms.
I know i can get it to work. This same thing happened before and my diamond didnt work for months. One day i decided, ill give it another try and flashed pegasus 6.1 and it worked like a champ ever since. I tried like 4 other roms too and they worked just fine.
I was using PMD's 2.5 rom when it crashed. I deleted all of my text messages, and then the phone froze and didn't turn back on. When I tried to reflash the rom is where im at now...stuck in the boot screen.
I've never been in the bootloader on my Diamond myself, it won't open
If there are diagnostics tools, try them out. Also try flashing on a different PC and OS or with a different cable. Disable antivirus software may also help.
I think I'm sol man. Still no luck.