Hi everyone.
I brought a second hand XDA IIi a few months ago and loved it a lot. It was an upgrade to my ancient XDA. But recently it has developed a problem with the screen alignment where the top of the screen won’t work correctly. I cannot complete a screen align successfully and have also tried a hard reset which got stuck at the screen alignment again. There is no visible screen damage on the phone at all. My old XDA had the same problem but not as extreme as this.
The grey line in the image attached bellow shows how broken the alignment is using the top of the screen as a straight edge (It’s a game called PocketSand). The alignment gets better as you go down the screen and towards the bottom its ok.
Is there anyway I could fix or at least improve it myself? (I’m not that technologically impaired!)
I don’t really want to send it off to be repaired as it’s my only phone and it looks like it costs a lot of money. (I'm a student)
Try to use notes and draw the vertical lines with pen.
Probably the touch screen is died on the top of the screen.
LP
Thanks for the reply.
Attached is a screen shot of the alignment using notes, again using the top of the screen as a straight edge. Its pretty bad as you can see.
Personally I'd go on ebay and get a new screen...
I've just had mine apart (easy to do - about 15 minutes; first time I've done it - to dismantle and put back together) and figured out the screen I wanted is £20.. had previously ordered just the digitiser only (the touch screen part) and figured out today I had the wrong one (the older version)
Oh well 20 quid's not much to get it all working again...
Old style digitiser that I bought: EDIT: WRONG LINK - this definitely isn't compatible(!)
http://cgi.ebay.co.uk/TOUCH-SCREEN-...ries_MobilePhoneBatteries?hash=item519098c2f9
Complete screen I'm now getting: (P/N:TD035STEB2 - matches back of my xda2i screen)
http://cgi.ebay.co.uk/FOR-XDA-2-II-...wItemQQptZPDA_Accessories?hash=item19af05e7b5
Dismantle Instructions
http://www.pdacenter.ru/razborka/razbor_htc_alpine/
Ok thanks for the links,
Guess Im gonna have to buy a new touch screen then.
If you do, then please do check the version you have before buying (unlike me!).
As I said mine had the part number TD035STEB2 on the back and it matched the one on ebay.. and although it looked like I _could_ solder just the digitizer on (ie there were 4 connections still, just a different layout). I was unsure about separating the screen from the digitizer and so decided to bite the bullet and pay out £20.
This could also be well worth the expense if cotulla (see other thread) is successful with porting 6.1 to the xda2i.. looks hopeful so far.
Thanks for the info
The version number I presume is on the inside when you open it up. Am I right?
Unfortunately I don’t have the correct screwdriver at the moment (TORX6?) but I guess the complete LCD + Touch screen would fit as it’s meant for an XDA2i and should be easier to fit as well.
That would be awesome if 6.1 came to the XDA2i
Yes you need a T6 to open it (4 screws) (and a tiny cross-head screwdriver as well.. for about 10 others)
The serial number is on the back of the screen and unfortunately you have to take the thing completely apart to see it.
Not sure if there's any other way to tell what screen you need - I have a feeling there may be two versions...
As I said, it's an easy job and doesn't take long following those dismantling instructions.
kevcal said:
Complete screen I'm now getting: (P/N:TD035STEB2 - matches back of my xda2i screen)
http://cgi.ebay.co.uk/FOR-XDA-2-II-...wItemQQptZPDA_Accessories?hash=item19af05e7b5
Click to expand...
Click to collapse
Thanks for that. Ordered one and hope it will sort out my XDAIIi, which is surprisingly easy to dismantle.
I've received mine and it is the correct one..
Haven't installed yet, as last time I took the xda2i apart, it lost all data including the deathnoise rom and had to reinstall.
Wonder if this means the (small) internal battery needs replacing..?
Both say 100% at the mo.
Anyone know how long until memory contents are lost usually?
I'm not sure how it all works..
Really I'm waiting to try Cotulla's rom image - so will probably wait for that to be released before I dismantle again.. if I'm going to lose the deathnoise rom image then I may as well try wm6.1
How long did it take for the screen to arrive from Hong Kong?
About 10-12 days.. I think... (I'm in England).
I heard it's been chinese new year so postal system may be a bit slow...?
It was packaged a little simply, ie no box but iloads of bubble wrap, etc and it was in one piece when it turned up.
Yep I'm in the UK too..10-12 days would be great
Read all this post before you install the screen...!
Okay - just did mine and no problems at all - all fixed
Out of interest, the screen came with a screen protector...
I installed the screen and put it together again - I then went to put the screen protector on and realised it's bigger than the screen...
Bit confused as maybe I should have put it on before I installed the screen..?
Managed to dismantle and reassemble this time before the backup battery died - think it dropped down to about 25% during the 10 minutes I did the job.
Anyway, good luck with yours and I hope you have at least as much success as me .
May be worth putting that screen protector on before installing the screen..?
I'll be interested to hear if it fits okay...
EDIT:
Aarrggghh!! I've been a complete idiot...
Just looked at the old screen and that had a screen-protector layer on it - I've just peeled it off and there's a completely pristine screen underneath(!)
So I didn't have to get a new screen; just a new screen protector!!
Guess I now have a spare screen
kevcal said:
Read all this post before you install the screen...!
Okay - just did mine and no problems at all - all fixed
Out of interest, the screen came with a screen protector...
I installed the screen and put it together again - I then went to put the screen protector on and realised it's bigger than the screen...
Bit confused as maybe I should have put it on before I installed the screen..?
Managed to dismantle and reassemble this time before the backup battery died - think it dropped down to about 25% during the 10 minutes I did the job.
Anyway, good luck with yours and I hope you have at least as much success as me .
May be worth putting that screen protector on before installing the screen..?
I'll be interested to hear if it fits okay...
EDIT:
Aarrggghh!! I've been a complete idiot...
Just looked at the old screen and that had a screen-protector layer on it - I've just peeled it off and there's a completely pristine screen underneath(!)
So I didn't have to get a new screen; just a new screen protector!!
Guess I now have a spare screen
Click to expand...
Click to collapse
Hey, thanks for posting that. My screen arrived today and I saw your post before fitting. So, looks like the screen already has a screen protector! All the aftermarket ones are gilding the lily, so to speak.
I got frustrated at the slowness of the IIi last year whilst trying to access transport directions and started stabbing at the screen with the stylus - I thought I had damaged it irrevocably but it was just the screen protector. The screen is pretty tough.
Anyway, now I have what feels like a totally pristine new machine. Except that what I have to do now is fix the charging/sync socket.
Thanks for your help!
Good news
I'm just using an after-market protector at the moment that slips under the upper and lower edges of the screen surround..
Maybe when wm6.1 turns up I'll sort the better one out.
Related
Hello there, XDA.
This thread is more for an ensurance for me that I've done nothing wrong when using my phone - and it might show up that some other people have the same problem as I do.
Now, to the thingie. Bought a HTC Diamond about 3 months ago - working just fine. Although about 3-4 weeks ago I realized that when I tilt my screen, I can see some crazy stuff going on... There is two pictures attached and linked to further down.
Anyone else has this problem? Would be lovely to hear what you've done. I sent an e-mail to HTC and the manu... manufactourer-/or~ (spelling :b).
http://img403.imageshack.us/img403/6462/htcbrokenkx4.jpg
http://img393.imageshack.us/img393/2473/htcbroken2wl7.jpg
i haven't got that problem, and that doesn't look good at all for you
jewhaen said:
Hello there, XDA.
This thread is more for an ensurance for me that I've done nothing wrong when using my phone - and it might show up that some other people have the same problem as I do.
Now, to the thingie. Bought a HTC Diamond about 3 months ago - working just fine. Although about 3-4 weeks ago I realized that when I tilt my screen, I can see some crazy stuff going on... There is two pictures attached and linked to further down.
Anyone else has this problem? Would be lovely to hear what you've done. I sent an e-mail to HTC and the manu... manufactourer-/or~ (spelling :b).
http://img403.imageshack.us/img403/6462/htcbrokenkx4.jpg
http://img393.imageshack.us/img393/2473/htcbroken2wl7.jpg
Click to expand...
Click to collapse
That just looks like moisture between the screen protector and the screen itself.
Odd that it's in a perfect rectangle. I've seen this before on a mates LG Viewty (Horrible phone!), but he never followed it up so I don't know what the cause was. It did have a touch screen, but no protector. Perhaps its moisture actually in the screen or a manufacturing fault?
Good luck.
Oh my - I had rectangle on the screen today when I removed the protective front later (brand new phone).
Though It's no longer showing I'm scared its going to become more apparent and eventually become like this.
What is going on with QA and HTC?
There was another exact case like this that I saw this week. Can't really remmeber but do a search and you will find it.
I have the same thing on my Touch Pro, and another user has had the same problem on his (her?) Diamond:
http://forum.xda-developers.com/showthread.php?t=428262
Unfortunately it isn't moisture below the screen protector, but that the touch resistive layer was subject to heavy pressure (eg: being squeezed in the pocket). It shouldn't affect anything in the short term, but in the long run the touch screen might become erratic or imprecise, so you should keep an eye on it.
The store I bought my TPro from doesn't accept returns/exchanges, and so far HTC hasn't replied to my support ticket. Unfortunately I think some of us are going to be left out in the cold. Personally I'm tempted to buy a replacement touch layer and replace it myself, but of course that would void the warranty (even though it doesn't seem to be doing me any good).
If this becomes widespread, there could be a chance for a class action lawsuit (hopefully HTC will wise up and help us out before it comes to that).
Ouch >.<, feeling sad (but somewhat a bit of relief) that some others has the same problem.
Yes, the rectangular shape is very, very odd - since that makes me think that just pressure can create this mess. It feels more like a manufacturing fault.. But, as for fhsieh, HTC hasn't respond to my support ticket.
Wondering if I should call them to get a direct answer.. Hm.
I've suffered this
But in a Touch Cruise I own before. I thought, as said, that this regular shape can only came from a pressure problem.
Loosing my warranty (due to the long time to be repaired here in Spain), I opened it, confirming that was not a problem with moisture (at least in my case). Also I saw the resistive layer poorly sticked to the body, with zones unglued, causing the layer to raise, specially in the bottom edges. This bothered me a lot, because I ended with lot of dirt between the layer and the screen itself, unable to clean.
Maybe that was the problem. If the layer is not correctly assembled it gets an irregular surface (as lightly squeeshed) , yielding this. But, functionally speaking, the screen was performing well, as it should be.
Hope this helps.
It's only humidity... it happens also in my diamond... try to dry it under the sun..(not so good for lcd but it works for me)..
Immanuel01 said:
It's only humidity... it happens also in my diamond... try to dry it under the sun..(not so good for lcd but it works for me)..
Click to expand...
Click to collapse
in a perfect rectangular? that doesn't seems right. although I could try it i guess.. still no answer from HTC Support -.-
jewhaen said:
in a perfect rectangular? that doesn't seems right. although I could try it i guess.. still no answer from HTC Support -.-
Click to expand...
Click to collapse
Yes, it's due to the prefect pressure of the screen, exactly in the center..if you try to press a corner for example near to Start button (with screen off) you should see the spot follow your finger's pressure. So there is a small drop between LCD and screen..(for me)
I had same problem in polaris. Send it for warranty as this is manufacturing fault. Why keep ****??? its htc s fault!?!
Well I thought i was the only one who had this problem till I came across this thread.... it's quite weird it's in a perfect rectangular shape anyone tried removing the protective screen and checkin whether it is the display... but one thing you hve to notice once the display is on we can't see tht on the screen only against a black background can you notice it....
It is the problem of screen protector. You may not see this watermark after you take off the screen protector. Try other good screen protector like Brando, Martin Fields ....
angler said:
It is the problem of screen protector. You may not see this watermark after you take off the screen protector. Try other good screen protector like Brando, Martin Fields ....
Click to expand...
Click to collapse
I tried removing the screen protector and the rectangular shape is still there then I put it in front of an A/C cooler unit and it went away!!!! then after awhile it returned back and the place I live is very hot and humid so I guess it's weather which plays a role....
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.
brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.
Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"
brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it
I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.
I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together
kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????
Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF
here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot
I love my tilt. It needs work, I can do. But should I just get a new-like tmob G1 (htc dream?) and unlock it for ATT and styart hacking on that? How cool is the platform? Is it as much fun to have one of those and play on XDA?
You can get an entire screen for your kaiser for around $35 check out fonlogix. The dream is a good phone too, you can check them out on the forum.
I've gone through a screen replacement on my Kaiser--it works perfectly fine, although it was a pain in the you know what to take apart and put back together. Unfortunately, I guess I wasn't careful enough; the upper/lower halves of the phone don't line up perfectly, although its not a good deal. If you value your time (it will take 1 to 2 hours) and you don't want to screw up, just get a new phone. But if you enjoy DIY and want to save some $$ like I did, then go for it
By the way my brother has a G1 that I use a lot, it is a fantastic phone, the larger capacitive screen is a huge upgrade and there are tons of *excellent* ROMs.
Tilt screen replacemnt
I just put a screen in my wife's 8925 a couple minutes ago.
Took about 45 minutes
Remove top bezel, unplug screen, remove. Clean top housing where new screen/digitizer will be, place new in, attach connector and replace housing.
The right hand side, in the middle, is the toughest part to get back together. It may have been easier to put the top bezel back on if the whole phone was apart, but it seemed better to do as I did and not take lots apart.
45 minutes and less than $30 from ebay. Only problem is the screen is not aligned perfectly. most of the screen is proper, but the scroll bars that adjust the time in a new appointment have to be touched more to the right of the button instead of being able to use the whole button. I suppose I got a cheesy screen that the digitizer is not as good as the original one. Still she is happy, and that makes me happy!
@ Hangard
damn your good...guess I need more practice lol
youy folks already fixed your phones? wher'd you get yer reaplacements..
@hangard @ chambord
Where did you get yer digitizer+touchscreen? sounds like ebay. gotta link? how important r toolz?
So Im not clear Ive got spider cracks and 'ppols' of black and not hires display just B&W. Does that mean I need to get a digitizer or a DTGZER and touchscreen from ebay... seems like im finding a lot of digitizers for $10?
Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube, but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!
Display removal
grisu59964 said:
Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!
Click to expand...
Click to collapse
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...
display is connected to body with really strong glue. Remember that it is impossible to remove old display without breaking it. Second thing is that with new display the phone most likely will not be waterproof
hakanW said:
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...
Click to expand...
Click to collapse
Hi! I broke mine last night. How did your repair go when the part arrived? I also could only find the russian video without the screen being removed
How hot did you have to make the screen? I was thinking of using an iron with a cloth around it.
Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?
canuck82 said:
Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?
Click to expand...
Click to collapse
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.
Daryl_tt said:
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.
Click to expand...
Click to collapse
I just ordered this: http://www.parts4repair.com/complete-screen-assembly-for-sony-xperia-v-lt25i/ I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...
Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.
Update
Daryl_tt said:
Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.
Click to expand...
Click to collapse
I replaced the screen - had it working for two days and dropped it again - cracked screen, doesn't even light up.
I now have another replacement screen and a better case - at least now I'm getting quicker at taking the phone apart....
screen help
canuck82 said:
I just ordered this: I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...
Click to expand...
Click to collapse
Hi this wont work, I went through the exact same issue, and its impossible to attach the new screen properly. your best bet is to try and find a second hand screen via ebay. it has to have the "housing part with it. otherwise you are wasting your time. it cost me so much to fix mine as I ordered two screens in the end I could have bought a new phone on special....
Try Ebay, and make sure you see the one with the screen and front housing on, I am unable to port the correct link on here as I haven't made 10 posts yet.
Search for the following on ebay : Genuine Sony Ericsson Xperia V LT25i front+digitizer touch screen+LCD display
This should let you find the correct screen
Look at the picture you will see the side housing for the front is also installed, the one you have ordered is the incorrect one as its only the LCD and the Digitzer, without the front housing that it gets "glued" onto. You can see the main difference where the earpiece is its shown as black, hence the mesh is there. that would be the correct one to order. Unless you have the means of getting yours glued back on the same way as the factory, I see you will struggle to get it done otherwise.
HI.
I've unfortunately caught my XT890's screen with what was probably a set a of keys and have pushed the frame away from the glass at the Sim and SD card slot so that there is approx. a 4 mm gap between the glass and the frame ( the sealant is visible).
The phone's screen continued to work perfectly for about a day until I pushed the frame back into place and appear to have done some damage as the screen slowly stopped working - I had a section of black that appeared at the top of the screen and slowly crept down the screen, which went purple first then black , creeping down the sides of the screen first, then filling in the middle until the full screen is black. I think I've also lost the digitizer input, as I can no longer turn the 6am alarm off on it.. and I can't take out the battery either :S
I've "rebend" the frame to the original damage, but this has had no impact in reverting the screen to "usable".
The glass looks complete - no cracks or anything, so I'm really not sure if replacing the glass screen and digitizer pre-build as a "frame" will fix the problem, or not. At ~£30 for the part on a phone worth ~£70, I'd like to understand if its' worth the risk or just to buy a replacement outright.
Has anyone had similar experience with this?
lol, never seen that before. Looks like the liquid inside the screen slowly dropped out and damaged some internal parts. This will certainly needs replacements. But unless u can do it your self i would consider buying a new one.
How did u bend your phone sides on the first place? (i never tried it, but it seems very sturdy)
I have absolutely no idea how I managed this - I was up a ladder at the time and must of inadvertently put a leatherman or keys in the same pocket as the phone and then "trapped" it so that it pushed sideways on exactly the weak spot of the simcard slot. I'll upload a picture of the damage for prosperity.
I didn't think AMOLED had liquid in them, but that would correlate with the affect I had - it must of been a tiny, tiny hole :S.
Such as shame after 2 years of perfect operation - and I had hoped for another year instead of procuring a new phone as it did the job so well.
Yep, I'm happy to replace it myself, I've done 4 or 5 screens on a Defy before, and this looks simpler.
PS - it looked very similar to the pictures in this, so that's positive in some ways!
http://forum.xda-developers.com/showthread.php?t=2456966
I cracked my screen and bought a new with digitizer. was very easy to replace just follow the youtube video about disassemble razr i.
You will also need some glue though for the stupidly placed motorola logo..
i bought mine from ebay for less than 20 euro. but it has some wierd greenish color in the top where the statusbar is. its not visible when holding the phone vertical. but when holding horizontel its alittle noticeable. not a problem at all but just be carefull going for the cheap ones.