Database Develop

Storage Card not showing up

Hi guys
Had problems yesterday with my Storage Card being renamed to Storage Card2 etc and could not figure out what was up. Renamed it back as described in various places (By deleting the Storage Card folder created and resetting).
Today however the Storage Card is not showing up at all. Have tried the following:
- Remove storage card, copy contents onto PC using card reader and formatting. Copy contents back and put in phone. -> No luck.
- Hard reset. -> No luck.
Never had any other roms than the standard. Have not upgraded to 6.1 yet.
Could the contents stop it from showing up?
Cheers
Louis

One thing i could think of is a corrupt file.
Try formatting it again (with all your files backed up in your PC) and just insert the card with nothing on it. If it shows up and your phone reads it, a good bet that one or more of your files from your backup is corrupt and the phone is unable to read the card.

yes i suppose that is a logical step to do. lets hope it is. but luckily it is still under warranty if it is hardware...

Reformated the card (FAT32 is this right?) and loaded into HTC TyTN II without restoring files onto it (i.e. completely blank).
Still not showing up...
Any ideas?

ur storage card reader might have become faulty. i would recommend a warranty exchange for ur device.

Installing WM6.1 sorted this out...

I have the exact same problem as you had.. But I already have WM 6.1 and the storage card still doesn't show up..
Tried formating, etc and still nothing.. I can see all the contents if i use a card reader on my PC, but once I insert de card on my kaiser it doesn't show up..
Any ideas?

Have you hard reset? It didn't help me until I installed the WM6.1. Otherwise is it still under warranty. I was actually on the way to take mine in when I installed 6.1. Actually I should have taken it in as I have a scratch on my screen and I suspect they would have replaced the phone...

This problem usually happens if you are using a third party file explorer like Resco etc. and make non visible areas such as your ROM visible.
It then treats the new area as Storage card and the SD card becomes Storage card2.
Just check if you have any other memory areas set as viewable and undo this.

My storage card completely disapeared but came back when I installed WM6.1. Didn't use 3rd party explorers etc. But this might be Baretto's problem.

This problem also occurs when running Card Export II. The Storage Card is renamed as Storage Card2. The only solution is to remove the card and re-insert it.
This solved the problem for me.
Regards,
MAC

The problem I originally described here was the Storage Card disappearing completely. Not renamed etc. I.e. there is no Storage Card2. Baretto may have a similar problem to mine or his may also just be renamed.

Yes, I have the exact same prob as lrossouw did. My mem card wasn't renamed. It just disapeared..
I've already did hard-reset, and I don't use any third party explorer.. I already formated the card.
My only hope is to flash another rom.
I'm using the official HTC 6.1 portuguese rom and i'de like to stick with this rom..
If I was the only one with this problem, I would think it would be a hardware prob, but lrossouw solved his prob by flashing another ROM, so I'm hoping there will be another solution..
EDIT: Just tried to flash another ROM and still no success.. Still Can't find my mem card

I got one better for you. I had to wind up formatting mine because of this. Here's the deal. I go to open up my storage card and the folder is there but none of my files are showing. Then I go to the memory to check the space available and it was still showing that I had half of the card full. So I popped out the card and plugged it into my computer with the same results, nothing. So then I soft reset twice, nothing. I pim backed up my phone and hard reset, nothing. The pim back up was on my card but nothing else. Then I made another my documents folder and for a split second it showed the files that use to be in the old my documents. So seeing that all was lost I formatted my card and I haven't had any problems yet. I started a thread about this but no one responded so I assumed no one else had this problem.
P.S. I have an 8gig sdhc card

cragordon said:
I started a thread about this but no one responded so I assumed no one else had this problem.
Click to expand...
Click to collapse
No one has answered you, because there are already other threads about that problem.. Search and you will find them..
This thread is not about empty mem cards.. It's about the device not recognizing the card, so pls refer to other threads..
Thanks

Baretto is it possible to reflash it with the wm6.1 rom? It might fix it.

lrossouw said:
Hi guys
Had problems yesterday with my Storage Card being renamed to Storage Card2 etc and could not figure out what was up. Renamed it back as described in various places (By deleting the Storage Card folder created and resetting).
Today however the Storage Card is not showing up at all. Have tried the following:
- Remove storage card, copy contents onto PC using card reader and formatting. Copy contents back and put in phone. -> No luck.
- Hard reset. -> No luck.
Never had any other roms than the standard. Have not upgraded to 6.1 yet.
Could the contents stop it from showing up?
Cheers
Louis
Click to expand...
Click to collapse
LOL,
Guy this is the easiest fix ever.
All you do is delete the folder that says "Storage Card" then remove & reinsert the SD card. SD 2 will disappear & be corrected upon reinsertion.
This issue happens because of the Unload delay & sometimes because of SD Power management issues.
Always best to make sure SD Card Power Management is DISABLED.

GSLEON3 said:
LOL,
Guy this is the easiest fix ever.
All you do is delete the folder that says "Storage Card" then remove & reinsert the SD card. SD 2 will disappear & be corrected upon reinsertion.
This issue happens because of the Unload delay & sometimes because of SD Power management issues.
Always best to make sure SD Card Power Management is DISABLED.
Click to expand...
Click to collapse
As I & Baretto posted before (read the bit you quoted) there is no *spoon* (edit:storage card folder). It is not there. Can't delete it if it is not there. There is no Storage Card 1,2 or any number either. The storage card is not showing up anywhere and not as SD2 either.
Mine was fixed by upgrading to wm6.1. Baretto is on wm6.1 already.

@ lrossouw
I already tried to reflash it with HTC original 6.1 rom and other 6.1 cooked roms and nothing..
I'm getting desperate..
I'm thinking about sending it to the warranty, but I'm predicting 1 or 2 months without my Kaiser if I do so
@ GSLEON3
What do you mean by "SD Power management issues"? As lrossouw said, I don't have the SD card rename problem, but maybe my Kaiser ins't recognizing the SD card because of something related with power mangement..

It might be power related. My phone was on very very low battery power just before this happened for me. In fact had to reset itself a couple of time due to low battery. The next day the storage card was gone.
Anythign similar for you Baretto?

programs not saving to sd card but to phone

for some reason everytime i install programs it installs to my phone and not my sd card. when i run the cab it gives me the option storage card or phone and i select storage card, but it seems as if its still saving to my phone. any idea? my phones out of memory=(

Sometimes there's a folder called "Storage Card" in the phone and the system misses itself.
Or maybe you have problems with your SD card (do a search here about "SD corrupted" and read about it)
If you're experiencing problems always with this, you'ld better have to hard-reset.
Or you may try to modify the registry "by hand" using Total Commander or similar and tell that "storage card" is the card and not any folder.
Could you tell us what ROM are you using, and which is your memory / SD / etc. status ? (screen accessible via settings/system/memory) And how many apps are you installing there ?

basically my memory is reading the following:
from the storage card(2gb):
0.287gb used
1.610gb free
from my phone
122.5mb used
0.00mb free
i'm running abu's v10 ultimate with the 1.65.21.18 radio. its not the suggested but it hasn't given me any problems yet. its just this saving thinig that's been a problem. all of my ringtones and pictures go to the storage card so i don't understand why my CABS aren't. all i know is my phone keeps telling me critical memory. sheit.

how do i set it so that it saves in the storage card on total commander?

You got too much snizzle on your device, i'd recommed getting everything off via active sync/WMDC and performing a hard-reset start fresh back up your SD card and give a fat32 format with computer.
Then you'll be back on a roll with a fresh device

so i did the hard reset, but do i needa reformat my sd card too? its already as a fa32. so everything should be fine now? =)

xxaznxx27 said:
so i did the hard reset, but do i needa reformat my sd card too? its already as a fa32. so everything should be fine now? =)
Click to expand...
Click to collapse
Should be fine i was just going with the whole kobosh

SKTools is an excellent tool with many features. You can move apps from RAM to storage card. There is a trial version on their site: http://s-k-tools.com/index.html?sktools/m_feat.html

Flashing from sd card Problem

Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover

SiemensLover said:
Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
Click to expand...
Click to collapse
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?

ClydeB1 said:
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
Click to expand...
Click to collapse
Thanx for ur reply
Yes, i cook my own clean ROMs, the ruu_signned.nbh is renamed to blacimg.nbh and is directly copyed to the root of my SD Card
I do not know what is wrong!
WBR
Siemens Lover

faced the same prob long time ago with a old 4 Gb card...no matter what i've did was not able to flash. However I sugest to reformat your sd card (FAT 32 and not on your pc/laptop, do it with your phone) and then try again after formating, altough it may not help. to be sure that you are not doing wrong try another SD card if possible.
Another option to check your self is flashing with ActiveSync after formating.
Good Luck
p.s. It seems this is happening often if you used your SD card in another device

I'd a similar problem while flashing on my old P3300
To avoid the problem, I'm using a 1gb micro sd dedicate only to rom flashing but with a single partition of 256MB.
dunno if this could help u
cheers

I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...

zephyr said:
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
Click to expand...
Click to collapse
Fashing with some big SD >4gb could generate some issue. Use one small dedicated to that and format it first in Fat32.

Hi Carl, thanks for your advice - it actually worked like a charm. I didn't really thing 8gb would cause this problem. I used just a plain 2gb ScanDisk card, formatted in Fat 32 and put only blacimg.nbh following normal procedures - thank you very much again!

My 2 cents
I had a similar problem not long ago with my 8Gb Micro SD that came with the card. I'd re-formatted it via the PC and altered the default settings based on a thread I read on here which was supposed to speed up access to the card. If I remember correctly it was changing the default allocation size.
Long story short, reformatted back to default settings and I was able to flash again from SD. IMO it's moreso the format of the card, not so much it's size as I never had a problem with flashing from card before tweaking it's format settings.

SD Card
I always flash from my SD card.
My latest card is a 16Gb class4 SanDisk, and I must have flashed more than 50 times from this. I always put my blacimg.nbh file in the root of the card.
Size of the card is not important, it just have to be formated in FAT32.
There are several reports that some brands of card do not work very well with Windows Mobile.
One time I purchased a Kingston card that simply would not work.

micro SD smaller than before- ??

hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance

bump bump bump

cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
keep the card in your phone and connect to pc with usb cable in card reader mode.
Format card.
If still dont work you got a fake/pirate micro sd

How did you format it ?
On the official SD Association web site http://www.sdcard.org/consumers/formatter/ there is the following statement:
"SD or SDHC memory card file systems formatted with generic operating system formatting software do not comply with official SD memory card requirements and optimum performance may not be experienced."
The site also provide an SD card formatter program, fully compliant with SD Association specifications, but, unfortunately for you, it runs only on PC, so you need a card reader.
I had the same problem some time ago, with a 2GB full size SD formatted with my iPaq and recognized as 1GB, this tool fixed it.

If you connect your device to PC as a card reader, as stated above, it should work.
Go to Settings / Connections / USB to PC and choose Disk Drive. At least, my Xperia, and many HTC have this control panel.

cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
chinese fake

you are a chinese fake, formatted with device that one of u recommended me and working
thx

Strange Sd card problem

Whenever i Install an gingerbread or cm7 Rom 2.3.7 on my x8,
after it the sd card in the phone is protected against writing, only reading.
The phone dont see the SD card anymore , and on my pc it see the card in my cardreader but i cant copy and paste things from it.
When i directly connect the phone with the sd card in it to my pc via usb, the pc dont see the sd card also.
Then when i flash back to the original Rom, the SD card is back normal like writing and reading and my phone sees the card.
Also i can Copy and paste like normal.
When i flash to froyo pro 24 (2.2.9 android) the phone also see the card like normal.
Looks to me something in 2.3 android versions mess with my SD card and set it on read only...
Does someone know what this could be?
Thnx in advance,
Henk

what sd card do you have? did you try format it?

It is the standard 4gb card that was in the box from the x8.
I install the roms via this sdcard.
I also formatted it but that did not solve the problem.
there is no ''lock''on the card, and after i flash it back to the original stock rom with flashtool it shows the card with no write or read protection.
In android 1.6 ,2.1 and 2.2 till version 2.2.9 i dont have the sd card issues.
I checked mini cm shakira,
herodroid
gx stock
prime hd and 2 other roms based on android 2.3.
Some i reinstalled and full wiped after the installation but that made no difference.
(offcourse i always full wipe/factory before installing the Roms )
In''storage settings it always say:
-total space
unavailable
-Available space
unavailable
-mount Sd card
Insert a sd card for mounting
-erase Sd card
erases all data on the phone Sd card such as music and photos.
(This is the only option that is highlighted and usable, and it erases only files when i tested it, it dont format the card)
I also tried to unlock the read only protection to place the mini sd card in the cardreader but i can't find an option to unlock that protection.
It only shows the files on the card but i cant copy and paste something.
(Both in windows7 and windows xp)
Some of them are on Stock kernel and the mini cm7 on an naa kernel.
(problem with the naa kernel was that i could not update the fix after flashing the rom in xrecovery,
since right after the flash from my sd card to mm7 my sdcard was on read only and write protected........had to reinstall the stock version by flashtool again and install xrecovery again and busybox,rooting, to start after with the flashing of custom roms again.
All of them did something with the sd card that it is read only when i place it in my sd card reader on pc ,and its not visible on the phone.
With some roms i can access the sd card via cwm or xrecovery to flash an rom zip but sometimes it says it cant mount''e'',
which is my sd card.
After i flashed my phone back to stock rom via flashtool, the sd card is visible again on the phone and not read or write protected.
Also on froyo pro 24(android 2.2) i dont have this sd card problem.
Could it be that there is some kind of driver for my sd card so that my phone reconize the sd card?
I really don't know what this issue could be and im stucked on 2.2 now.

you're using 2nd ext partition?
if yes, trying to solve it and boot via cwm and format it using partition sdcard (advance > partition sdcard) you need to backup your data first
if not using 2nd ext partition, try format using this http://hard-disk-low-level-format-tool.software.informer.com/ but i'm not test it yet

maybe u must check and repair your sdcard
1. try with another sdcard
2. make sure if your sdcard format is FAT
or
3. backup your sdcard data to your pc, then format it!
it must be work

Your idea doesnt work
BlackRabbit1703 said:
maybe u must check and repair your sdcard
1. try with another sdcard
2. make sure if your sdcard format is FAT
or
3. backup your sdcard data to your pc, then format it!
it must be work
Click to expand...
Click to collapse
Maybe the ROM doesnt have the necessary drivers. Any idea on how to install them?

Go to following directory via a root explorer app:
Root/system /bin
Find this file:
Fsck_msdos
Delete & Replace with froyopro's disk checker.(same file in froyopro rom)
Yes,this is the file which scan & fix ur sdcard For errors in startup.
This must help u.
Sent From My Black DRAGON