Database Develop

Bluetooth broken after installing WM6

Hi all,
Finally WM6. Great!
But after installing the Tofclock ROM, my device became unstable like many others have reported. So when C_Shekar published his ROM, I installed it.
No problems on stability anymore, but after this upgrade I can no longer use my Bluetooth functions properly.
I can pair with my GPS, but as soon as I try running GPS software the device becomes slow and will reset after some time. After that, only turning bluetooth on will cause a reset, no matter if I'm paired or even using it at all.
So I re-installed the Tofclock ROM, because there I had at least GPS. But now it was no longer working there either.
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Can someone please help me on this one. I understood from other posts that I'm not the only one, so it's not just my Hima. But I really would like to have my GPS back.

rvdrijt said:
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Click to expand...
Click to collapse
Which indicates that it is an hardware failure and not a software problem.
Flashing the device with another ROM version does not destroy any hardware at all.
Sascha

Thanks for your response.
But if it is just a hardware problem that can't be caused by an upgrade, how come I'm not the only person experiencing the same issue that started at the same time?
If it was just me it simply could have been bad luck.......
I'm just still not sure of my conclusions, but everything points at the upgrade to WM6. Let this be a warning!

I have not seen any similar reports in any threads before. Can you link us to specific messages?
It is very well possible that it's a software problem. After all you're probably using the same GPS/BT software in all these ROM up/downgrades you tried?
My GPS software is entirely on my SD card, after flashing a new ROM and formatting my RAMdisk it instantly knows my last position. Your software has IMHO probably messed up some file on your SD card that's related to your BT/GPS settings or so. I advice you to format your SD card, reinstall the clean GPS software on it, see if it still misbehaves.

http://forum.xda-developers.com/showthread.php?t=332945&page=17
You also entered a reply back then ;-)
I will re-install my GPS software. However, I've tried other programs as well with the same result (i.e. Speed Sentry). But that might be because I tried it after a first reset. And the reboot also appears when I have a different SD card in the slot.
Right now I'm waiting for my backup battery to be empty. Who knows, a 'real' hard reset might help.

@Maggy
Seems you were right! Removing the battery didn't work so I checked my GPS program's files. I found a recently changed file for the config and after I removed it it seems to work again!
Still a big puzzle why it started when I changed to WM6. But I'm updating my ROM at this moment so I hope to be able to answer the question if it is WM6 related soon.
Thanks for the help!

You're welcome.
And yes, you're right that I replied to that post but my memory is in my PC and XDA, not in my head
It's possible that there's a tiny difference between the way the config file is written in WM6 or WM2003, so switching from one OS to the other messes the file up.
I have the good habit of formatting the SD card when I flash a ROM.
Glad this item looks solved.

Even better: it doesn't look solved, but it is solved.
I went home using my GPS! YESSSS!
Knowing this it's time I start cooking my own ROM......... thanks to all the great people at this forum.

Hello All
After having read the message, I just try TOMTOM 6 with RBT2001 and have the same problem, tomtom is very slow, and after some time soft reset.
And I have this problem with the new ROM: 7.0c.40CS (WM6 AKU 7.0)
And I had no problems with the ROM: 7.0b.40CS (WM6 AKU 7.0)
If this can help you understand the problems ?

I guess you should delete \Storage Card\ttnavigator.bif, then reinstall Tomtom

It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.

rvdrijt said:
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
Click to expand...
Click to collapse
Good.
Tomtom work again.
Thank you

Error 246, 260 and 202

hey guys,
I'm freakin' out... I followed the instructions on trinityguides.info to upload the Hard-SPL. However, even though the Active Sync is working and the RUU seems to connect to the mobile and everything if going fine so far I get this bloody 246 and that *****y thingy of a mobile is going into the three colour mode... Ok, not a big deal. As I've read in the FAQ just start the RUU again and it should be cool... well, its not... now I get a 260. Nevertheless, I've not given up yet. I tried the installation again. This time without accepting the message on the mobile, after a while I get another error 202....
so please guys... where is the trick??? I read something about go into bootloader manually - I reckon that's the camera,power and hard reset button combo. When should I do this???
I also downloaded all three of this roms, 1.20, 1.30 and the other Macrofl or so....
I'm running XP SP2, Active Sync 4.5,
Mobile: HTC P3600, IPL-0.50, SPL-1.07.0000, WM5 German

Update via SD
Hi,
I had the same kind of problem just a few days ago... and I solved it simply using my SD memory. Using it, you bypass the pc (and the connection between the PDA and PC) and all this type of problems "connection-depending".
You can flash your PDA putting the rom image on the SDcard (how you should do, you can read here here )...
Ciao
Tompo

hey tompo,
thx for your help, but I still have problems. I formated my Sandisk 2GB ultra II SD card and copied the RUU_signed.nbh to the root of the SD. Then I renamed the file to TRINIMG.nbh and went manually to the bootloader. However, there was only a short flickering of a grey screen that said "loading", after that I was back in that three colour thingy.... crap.... what the hell am I doing wrong???
seems as i have though luck with that mobile....
Any more hints???
cheers

dee-fu said:
hey guys,
I'm freakin' out... I followed the instructions on trinityguides.info to upload the Hard-SPL. However, even though the Active Sync is working and the RUU seems to connect to the mobile and everything if going fine so far I get this bloody 246 and that *****y thingy of a mobile is going into the three colour mode... Ok, not a big deal. As I've read in the FAQ just start the RUU again and it should be cool... well, its not... now I get a 260. Nevertheless, I've not given up yet. I tried the installation again. This time without accepting the message on the mobile, after a while I get another error 202....
so please guys... where is the trick??? I read something about go into bootloader manually - I reckon that's the camera,power and hard reset button combo. When should I do this???
I also downloaded all three of this roms, 1.20, 1.30 and the other Macrofl or so....
I'm running XP SP2, Active Sync 4.5,
Mobile: HTC P3600, IPL-0.50, SPL-1.07.0000, WM5 German
Click to expand...
Click to collapse
Ok.....You wanna get to the 3 strip screen?
Make sure the battery has a 50% of its charge.
-Turn the device off.(DON´T HOOK IT UP TO THE COMPUTER YET) so it should be off and unplugged.
-Press and HOLD camera button + power button,now you should see the 3 strips,if so you can hook it up to the usb port.
Got it?
I don´t remember now if you have to follow this step first:
http://forum.xda-developers.com/showthread.php?t=293957
Like I said I´m not sure,but take a look.....if you brick the phone there´s a way to fix it.
See ya.

THX
thank you guys for the support,
however, the source of the prob was the SD card. Even though I formatted the SD in my laptop with FAT32 and no label, it seemed to me that the mobile couldn't access it. I've done it several times - didn't work. Finally, I thought lets format the thingy with the mobile itself - voila - it worked.... I dono if something with my card reader is wrong... the SD was working fine with tomtom and was accessible in both (laptop and mobile) without flaws. Only the bloody flashing didn't work as it should be.... well, I don't mind any more, may be its a solution for another desperate trinity user....
Cheers guys - I'm runnin' on WM6.1 now....*sweet*

hello could you please say how did you format with the trini, cuz I'm really new and unable to find that function.
I have exactly the same problems, but no external card reader
Many thx

Kaiser Internet Explorer Problem

Gurus,
My internet explorer hangs every time i go to a website. It stops halfway and i flashed Dutty's new Diamond ROM. But it still hangs and i have to reset the mobile again. I have Tomtom and Iguidance with google and live on my mobile. Any of there causing problems?
Any help is greatly appreciated...
Thanks,
Raj

Have you changed the temp internet files to go to the sd card?

ChumleyEX said:
Have you changed the temp internet files to go to the sd card?
Click to expand...
Click to collapse
YESSSSSS... shouldn't i do that?

No. It causes IE to hang (as you just found out ).
Move them back to the device.

this issue has already posted if u search few pages back.. anyway the problem is solved if u follow the tips given

[SOLVED] No 3G/Internet connection on ALL Custom ROMs I've tried.

Hi,
I've flashed all kinds of custom roms after installing HSPL(Energy;4-2/7-2, TouchX, Valkyrie Firestorm, Cristian and others) and also have flashed my Xperia1 with different radio's (also the latest 1.14.55.25 AND installed rilphone). I know I'm doing it right because this is not my first time flashing, but my internet connection stays "dead". I've manually changed the settings to the right ones, softreset.. still no luck. With some roms I do see in CommManager that I'm connected, but when I try to update the weathertab or browse Opera I don't have a working connection. When I flashed it back to the latest stock rom the device still can't get a connection. Does anyone experienced this type of problem and if so, is there a known fix for this? Thnx in advance!

My friend had a similar problem, he was using double SIM card (= he had two sim's in one phone number). Problem got solved when he changed to one sim operator.

With almost all of the roms you have used I had an 3G internet connection when I used the roms.
I use Radio 1.16.25.48 + 1.14.25.55 rillphone.dll
Oz

Try your sim in another phone, see if it can get a GPRS attach. If it can't, then some scrub at your operator might have removed the codes on your account.

I´m having the exact same problem! Difference is my internet connection is sometimes working for 20 seconds or so...
Have you found any solution? I´m going to try talking to my operator again...
My SIM has no problem getting a GPRS attach in another phone.
I just started another topic for this:
http://forum.xda-developers.com/showthread.php?t=632659

I´ve just corresponded with my operator, they say that the problem probably is the phone and that I should send it in for service...
I don´t buy it, to much of a coincidence with two people having the exact same problem.
Wich operator do you have?

Same problem here

x1-xda said:
Same problem here
Click to expand...
Click to collapse
!
This is really strange.
Maybe they are all programmed to stop working during the Olympics...

My phone connects to GPRS/EDGE and connection manager says that data connection is active but when i open IE,Opera,Google Maps or any other network application then it says "server not found" or "connection error" or something similar.
But all worked fine with default WM6.1 ROM.

x1-xda said:
My phone connects to GPRS/EDGE and connection manager says that data connection is active but when i open IE,Opera,Google Maps or any other network application then it says "server not found" or "connection error" or something similar.
But all worked fine with default WM6.1 ROM.
Click to expand...
Click to collapse
For me it´s not working when I go back to original ROM... Have you tried flashing original ROM since your problems started?

No, i didn't try to go back to original ROM.
I will try it tomorrow and post results here.

Had same issue, no internet keep on poping up.
I hard SPL and flashed the stick ROM. Then Hard SPL again and flashed Untamed 1.3 and it's working like a charm...no issue (running from 2days now)
Try out...
Thanks!

x1-xda said:
No, i didn't try to go back to original ROM.
I will try it tomorrow and post results here.
Click to expand...
Click to collapse
Are you on T-Mobile? If so, the phone does not support their network for 3G

MJCS said:
Are you on T-Mobile? If so, the phone does not support their network for 3G
Click to expand...
Click to collapse
My area only has Edge. But 30 miles north of me where my brother works T-Mobile supports 3G.

manishsharmasz said:
Had same issue, no internet keep on poping up.
I hard SPL and flashed the stick ROM. Then Hard SPL again and flashed Untamed 1.3 and it's working like a charm...no issue (running from 2days now)
Try out...
Thanks!
Click to expand...
Click to collapse
Why Hard SPL again if you already have Hard SPL on your phone?

soulseller said:
Why Hard SPL again if you already have Hard SPL on your phone?
Click to expand...
Click to collapse
I flashed the stock ROM (Image and then SPL)...tried to flash ROM's without SPL again and phone wasn't detecting the image file on uSD card...did Hard SPL again and worked perfectly...that's the reason!

Ah, OK.
Maybe I´ll try to go back to stock SPL and then Hard SPL and see if it works.
Or maybe I´ll just send it in and hope thr warranty claim works...

MJCS said:
Are you on T-Mobile? If so, the phone does not support their network for 3G
Click to expand...
Click to collapse
I'm not on T-Mobile.
When i bought this phone, everything was working fine, then i installed hard spl and put custom rom and after that internet connection doesn't work. It worked with stock rom and automatic settings but now doesn't, and i even tried entering all settings manually but no luck. Phone connects to data connection but there is no activity on that connection (0 bytes sent/ 0bytes received) no matter what i do, nothing goes through.

MJCS said:
Are you on T-Mobile? If so, the phone does not support their network for 3G
Click to expand...
Click to collapse
My Xperia X1 supports and works fine with T-Mobile 3G. So doesn't support doesn't compute...
Oz

I solved my problem: my data connection need proxy server to connect to internet but i just removed that checkbox from connection proxy settings and now data connection works

Installed wrong nbh file help!!!

Ok first off I am really sorry for the stupidity and should have paid more attention. I was flashing the NBH on my Tilt 8925 and I got the wrong one! it was the KAISIMG-PANEL1-428.NBH that I downloaded and now the text is hard to read and it wont install and I cant change it. Right after I did that I found the forum that told you witch one to use. I wanted to cry!!! So what I'm asking is my phone done for? or is there a way to fix this? like through the andboot folder somehow?
Thank you for any help at all!!!
you learn from your mistakes though, I'm sure I wont do that again

Fixed it! :d
After I gave up I remembered someone said to hold the camera and the power button and reset buttons. I did that just to see what it would do and the colored screen came up with usb at the bottom. so I triad the right file and ran it again and it worked! Now I'll have to give it another go!
so this can be deleted now Thanks!

Just for future reference.
If you flash the wrong nbh with android, you should be able to flash the correct one using either the SD method, or the USB method.
Above all, do not panic, panic bricks more devices than bad flashes ever did
Since this is the Android area, I must say we are extremely lucky, since we are able to flash a new nbh without losing anything at all as far as the OS is concerned, your data and system files will remain intact, flashing an android nbh only replaces the zImage and the android bootloader files, unlike WM where you flash the whole OS and lose everything

Android
That's good to know because I thought I lost the phone for good. I didn't have any data on it that I needed, I was trying to install android to nand and just got the wrong NBH.
The only thing now that would keep me with WM 6.5 is cant get the wifi to work right. It connects to the router but the internet cuts out very bad, like it will work for 10 seconds then cant get it to work at all for 20min then it will load a web page then doesn't work again!

I did the same thing to my Tilt. I downloaded the Kaiser for Super Eclair and flashed it and did not not know I did not flashed the HardSPL.nbh.
I finally figured it out and flashed the HardSPL.nbh. It is at 3.29 right now. But I the phone keep getting error after the penguin screen with scrolling text. It said something about unable to read data. How do I fix this problem?

BeenAndroidized said:
I did the same thing to my Tilt. I downloaded the Kaiser for Super Eclair and flashed it and did not not know I did not flashed the HardSPL.nbh.
I finally figured it out and flashed the HardSPL.nbh. It is at 3.29 right now. But I the phone keep getting error after the penguin screen with scrolling text. It said something about unable to read data. How do I fix this problem?
Click to expand...
Click to collapse
Jesus... the last post is more the 1year old.
I know you must search, but if the last post is that old, the probability that everything in it is outdated, is near 100%.

Well, that is the what I found. I hate digging up old post especially when it's that old.