Related
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
ecomajor said:
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
Click to expand...
Click to collapse
do you have a G3 or G4?
What are your IPL/SPL?
Which other ROMs have you had installed on this wizard?
ecomajor said:
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
Click to expand...
Click to collapse
So, you start a new thread with the same problem you posted in another thread hoping to get an answer??
My answer to you is the same one I posted to you before --
READ THE STICKY ABOUT UNLOCKING AND FOLLOW IT STEP BY STEP!!
Then -- and ONLY then -- will you be able to flash to a custom ROM.
newbie2 said:
So, you start a new thread with the same problem you posted in another thread hoping to get an answer??
Click to expand...
Click to collapse
Yep, I've replied to ecomajor's various posts in various threads and have basically given up. Very little info each time and having a problem that nobody else that has followed the steps has had.
Sorry ecomajor, don't know what else to tell you that hasn't already been said numerous times.
One Last Try -- Then, I Give UP!!
Read the following post on how to flash ANY Wizard (yes, that includes the 8125) --
http://forum.xda-developers.com/showpost.php?p=1177659&postcount=1
Now, follow the directions in that post WORD FOR WORD and STEP BY STEP. The only reason it wouldn't work is that you're NOT READING and/or NOT FOLLOWING THE INSTRUCTIONS STEP BY STEP.
If you CAN'T read and follow directions, then don't be trying to flash different ROMs to your phone. If you're not willing to do what's necessary to help yourself, then noone else is willing to help you, either. . . especially when your problem has already been replied to with the same information over and over in 2 DIFFERENT THREADS now.
Let me detail you the exact steps I have taken. I have read through those posts, many times so I am certain I took those steps
1)device starts normally goto step 3.6 since unsure if unlocked.
2) read farias thread
3) download buttons rom
4)attempt to downgrade rom - failed
4a)tried 1.08 rom instead of button - failed
4b)tried wizard love- failed
5)download lokiwiz
6)followed all directions -failed - since was not able to downgrade rom.
Obviously these directions are not 100% foolproof - I know that the first time I tried installing WM6, I did not read through all the threads and after much effort I discovered that if I installed the official cingular 225 rom then I could get my ppc back working but since then I have had no luck getting flashing to work. Please tell me what I am doing wrong because noone has had my exact situation. there is no need to act all holier than thou and accuse me of not reading because since I screwed up the first time I have read through all these threads numerous times.
Ok, one more thing to try (shot in the dark, but I have no clue what is happening here)...
On your PC (its running XP, right???), do you have Firewall and/or Antivirus? If so, reboot your pc and don't start anything and then turn off your Antivirus and Firewall programs (I found a couple of threads where people were getting the error 260 when ZoneAlarm is active). Now try flashing the button rom. Don't try doing any other roms, don't try doing lokiwiz, just try to get the button rom on. If that works, then continue on with the steps here:
http://forum.xda-developers.com/showthread.php?t=285435
You might even try booting your computer into safemode and try flashing that way (I doubt activesync would be there, so put the phone in bootloader mode, and if you see USB above the left softkey then you should be able to flash it this way from safemode. Never tried it, but it pretty much eliminates anything that may be on your PC thats causing problems).
If none of that works, then get back to an official stock rom again and report back here with exactly what you did, what you saw, and all. Don't worry about the post being long, because to me, too much info is better than just short posts that don't tell us anything. Also, only update this thread. Forget all the other threads you have stuff going on about this problem.
Final question, I asked this before (and I don't remember if you answered or not)... Have you tried to flash your device from another PC?
And I've attached the ROM Update Utility Readme.doc that describes the error messages and how to fix them.
The weird thing is I never get code 260 with the cingular rom update just with the other roms. I will have to try the disabling all firewalls, antivirus etc at home bc at work there is all sorts of stuff i dont want to mess with. Problem if I do it in safemode is then the activesync driver wont be loaded and it will give me an error for that.
mfrazzz said:
Ok, one more thing to try (shot in the dark, but I have no clue what is happening here)...
On your PC (its running XP, right???), do you have Firewall and/or Antivirus? If so, reboot your pc and don't start anything and then turn off your Antivirus and Firewall programs (I found a couple of threads where people were getting the error 260 when ZoneAlarm is active). Now try flashing the button rom. Don't try doing any other roms, don't try doing lokiwiz, just try to get the button rom on. If that works, then continue on with the steps here:
http://forum.xda-developers.com/showthread.php?t=285435
You might even try booting your computer into safemode and try flashing that way (I doubt activesync would be there, so put the phone in bootloader mode, and if you see USB above the left softkey then you should be able to flash it this way from safemode. Never tried it, but it pretty much eliminates anything that may be on your PC thats causing problems).
If none of that works, then get back to an official stock rom again and report back here with exactly what you did, what you saw, and all. Don't worry about the post being long, because to me, too much info is better than just short posts that don't tell us anything. Also, only update this thread. Forget all the other threads you have stuff going on about this problem.
Final question, I asked this before (and I don't remember if you answered or not)... Have you tried to flash your device from another PC?
Click to expand...
Click to collapse
ecomajor said:
The weird thing is I never get code 260 with the cingular rom update just with the other roms. I will have to try the disabling all firewalls, antivirus etc at home bc at work there is all sorts of stuff i dont want to mess with. Problem if I do it in safemode is then the activesync driver wont be loaded and it will give me an error for that.
Click to expand...
Click to collapse
I've never tried it in safemode so I don't know if that will work or not, it was just an idea as we are grasping at straws here. But if you boot to safemode, and with the phone at the bootloader screen (hold down the camera button while you turn it on to get to the "rainbow" bootloader screen), if it shows USB above the left softkey then the computer and phone are communicating and Activesync does not matter. BTW:You can try the safemode way there at work as you will have no network connectivity in safemode so you don't have to worry about violating security policies.
You still have not answered my one question directly... Have you tried flashing the button rom to your phone on multiple computers? Or have you always done it from the same PC? And are the PC(s) that you are using running Windows XP?
What DOC chip does your device have? G3 or G4?
If you have a G4 then i guess you ruined your bootloader since G4 devices don't have and don't accept 1.xx IPL versions!!
I have tried button from multiple pcs. This time it gets up to 98% on button and then dies and it gives error 302 - update error for the button. This is a problem that I was having before.
Did you read the document I posted?? If you're getting Update Error 302, you're not going to be able to recover with anything other than the stock Cingular ROM.
Chances are that you did indeed ruin the bootloader when you tried using the ShellTool to flash a G3 phone. And I doubt seriously that you'll be able to do a warranty exchange if you can run the stock ROM successfully, so I'm afraid you're stuck now with the stock-shipped ROM.
So you are saying there is no way to fix the bootloader (like flashing it or soething) I was figuring I had screwed something up. I actually had read the document before but thanks for your help. Why is it that you can fix many other issues with the 8125 but not the bootloader?
I'm not saying it CAN'T be done. What I AM saying is that in the year I've been registered and active here, I've not seen any posts/threads about recovering from a bad bootloader. But that doesn't mean that there ISN'T a way to do it.
You might want to do a search of the Wizard section for bootloader error or recovering bootloader to see what might come up.
Good Luck!!
Alright, so i decided to finally get into my 8125's skin.. so i followed tutorials on this website.. started by using button's downgrader and then used the lokiwiz to unlock the CID and SIMLock.. after that i used the T-mobile 2.26 ROM and after that I installed Farias WM6 ROM.. the problem is that now I do not get any cell phone reception when I put in a T-mobile card or any other card and it just keeps on searching and searching.. also the flash light at the back of the phone is also half lit.. i checked by switching it on through the camera function in which it goes full strength but I would say its abt 20% right now.. does anybody know any remedy?
My easiest advice, since this happened directly after flashing then work on the principal that its the culprit. So just reflash it and make sure u first flash with a stock ( non custom made ) rom.
Hope it helps!
thanks for the reply.. i was beginning to think nobody would be able to help me.. anyways.. i tried to flash it with the OEM rom i got from the HTC website but that didnt help.. any other suggestions?
I start up my boot loader(the tricolored screen) then i connect my usb(says usb connected on bottom left) then i run my RUU. Every time i do this it either says error or invalid tool. Does anyone know what the problem here is or can anyone help me figure out why i can't flash???? I am currently trying to flash a p4300/wizard 8125 and is unlocked.
You need the RUU_noID to flash another ROM. Try and flash the Wizard_Love ROM and see if it boots up
i flashed it with wizard_love rom but it loads really....reallly.....really..... slow so slow i cant really do anything with it and the screen has these lines running horizontally. what do i do now?
BootLoader came up but can not flash
Hello all experts. Sorry, i didn't mean to hi-jack this thread, but it seems i have similiar problem with this. I can get my Tmobile MDA into boot loader (tri-color) when i plug in the the PC the USB appeared on the lower left conner of the MDA. but i can not do anything beyond that. I tried to flash to original shipped ROM from Tmobile, but it won't recognize the the phone, i tried love ROM, same thing......i've read many threads and tried many diffirent methods from other poeple, but still not get the phone recognize the phone. Any help would be appreciated
BTW. the boot loader says
SPL 308
IPL 308
I used bottom row to solve this problem
nskhan said:
I used bottom row to solve this problem
Click to expand...
Click to collapse
Please explain what 'I used bottom row to solve this problem.' What is or where is 'bottom row?'
Thank you.
Tonis said:
Please explain what 'I used bottom row to solve this problem.' What is or where is 'bottom row?'
Thank you.
Click to expand...
Click to collapse
Its not 'bottom row' but "Button's Rom 1.05" and you can find it in 'Definitive unlocking guide' by Dr.Putts in the 'Wizard Upgrading Forum'. or from this link :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Cheers!
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
I've searched and asked for help for months and I can't find anything.
My Sprint Touch Diamond is F'd. I tried flashing an unofficial ROM to it, and on the reboot process, it won't turn back on. In fact, it constantly resets...every time I turn it on, or even placing it on the charger it will turn itself on and keep resetting.
I need to know if it's bricked or if there is anyway of getting it to work again. Someone please please please help, im pretty desperate for advice. Thanks in advance.
Did you install the HardspL? Anyways try to hold down the volume down button and the power button while you push the reset button. If it brings you to a multi-colored screen connect it to the USB and flash another Rom. Make sue it is a CDMA if your phone is CDMA.
Yeah, if you can get it into bootloader you should be able to reflash the shipped rom from your carrier. Use the exe. I would flash it at least twice.
i believe its cdma. it was brand new from sprint.
Lawler said:
I've searched and asked for help for months and I can't find anything.
My Sprint Touch Diamond is F'd. I tried flashing an unofficial ROM to it, and on the reboot process, it won't turn back on. In fact, it constantly resets...every time I turn it on, or even placing it on the charger it will turn itself on and keep resetting.
I need to know if it's bricked or if there is anyway of getting it to work again. Someone please please please help, im pretty desperate for advice. Thanks in advance.
Click to expand...
Click to collapse
Hi Lawler read this first >>> Click Here
Then Here >>> Click Here
HTC Stock Rom >>> Click Here
If you can get into bootloader mode(press vol down + power)until you see the tricolor bars then you're ok you can either flash the stock rom or unlock it then install a custom rom.
HTH
ive searched these forums for an answer for months and have found nothing, It wont go past the boot screen. Ive tried about ten different roms, which have worked before. Hard reset doesn't do anything, and MTTY is a joke. I am willing to pay anyone who can help me get this thing working, im a desperate man at the moment!
ive searched these forums for an answer for months and have found nothing, It wont go past the boot screen. Ive tried about ten different roms, which have worked before. Hard reset doesn't do anything, and MTTY is a joke. I am willing to pay anyone who can help me get this thing working, im a desperate man at the moment!
Click to expand...
Click to collapse
Can you get it into the bootloader? If you cant then your probably out of luck. If you can, flash HSPL, unlock your phone, and flash a ROM.
Sent from my XDANDROID using the XDA mobile application powered by Tapatalk
Yes, it goes into the bootloader. I've flashed a hard spl, it's unlocked. I just tried your rom that makes 12 that I've tried. The same thing happens. The phone turns on to the Touch DIAMOND screen with the red rom info on the bottom and it will not go any farther. Hard resetting does the same thing. I've tried using MTTY, I've tried stock sprint roms.
I know i can get it to work. This same thing happened before and my diamond didnt work for months. One day i decided, ill give it another try and flashed pegasus 6.1 and it worked like a champ ever since. I tried like 4 other roms too and they worked just fine.
I was using PMD's 2.5 rom when it crashed. I deleted all of my text messages, and then the phone froze and didn't turn back on. When I tried to reflash the rom is where im at now...stuck in the boot screen.
I've never been in the bootloader on my Diamond myself, it won't open
If there are diagnostics tools, try them out. Also try flashing on a different PC and OS or with a different cable. Disable antivirus software may also help.
I think I'm sol man. Still no luck.