I start up my boot loader(the tricolored screen) then i connect my usb(says usb connected on bottom left) then i run my RUU. Every time i do this it either says error or invalid tool. Does anyone know what the problem here is or can anyone help me figure out why i can't flash???? I am currently trying to flash a p4300/wizard 8125 and is unlocked.
You need the RUU_noID to flash another ROM. Try and flash the Wizard_Love ROM and see if it boots up
i flashed it with wizard_love rom but it loads really....reallly.....really..... slow so slow i cant really do anything with it and the screen has these lines running horizontally. what do i do now?
BootLoader came up but can not flash
Hello all experts. Sorry, i didn't mean to hi-jack this thread, but it seems i have similiar problem with this. I can get my Tmobile MDA into boot loader (tri-color) when i plug in the the PC the USB appeared on the lower left conner of the MDA. but i can not do anything beyond that. I tried to flash to original shipped ROM from Tmobile, but it won't recognize the the phone, i tried love ROM, same thing......i've read many threads and tried many diffirent methods from other poeple, but still not get the phone recognize the phone. Any help would be appreciated
BTW. the boot loader says
SPL 308
IPL 308
I used bottom row to solve this problem
nskhan said:
I used bottom row to solve this problem
Click to expand...
Click to collapse
Please explain what 'I used bottom row to solve this problem.' What is or where is 'bottom row?'
Thank you.
Tonis said:
Please explain what 'I used bottom row to solve this problem.' What is or where is 'bottom row?'
Thank you.
Click to expand...
Click to collapse
Its not 'bottom row' but "Button's Rom 1.05" and you can find it in 'Definitive unlocking guide' by Dr.Putts in the 'Wizard Upgrading Forum'. or from this link :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Cheers!
Related
Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
i'm glad i solved the problem.. just entered manually in bootloader then flashed a original qtek rom and it fine now
thanks anyway, hope this help other people in this very situation
bye
cheers from portugal
W4R_M4ST3R said:
Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
Click to expand...
Click to collapse
You can't go from 1 to 3. Re-flashing a stock ROM was a good move.
--M
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
zorrozorro said:
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
Click to expand...
Click to collapse
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
_Nomad_ said:
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
Click to expand...
Click to collapse
How can i upgrade my ROM if i could not connect my phone to the computer! The main problem is that i could not syncronise my phone and my PC.
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
_Nomad_ said:
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
Click to expand...
Click to collapse
Thank you!!
Could you explane me a bit more precise what does it mean bootloader and reflash? Does it mean that i can syncronise phone and computer when i have RGB on my screen?
When you've got your device in bootloader mode just plug it in and start the upgrading procedure
_Nomad_, thank you!
It works now!!
zorrozorro said:
It works now!!
Click to expand...
Click to collapse
Like music to my ears
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
kevinalmere said:
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
Click to expand...
Click to collapse
Always post the data of your your phone,to get help.
secondly you had a bad flash,perhaps your phone is CID locked. Which rom were you trying to flash ?
Now to recover,download the official carrier's rom and flash it while in bootloaders.The phone will start working again in default status,then,Read and understand the unlocking method and the flashing guide,read the stickies carefully and perform the method correctly.
cheers !
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Help!!!
I have same Problem with TNE-V1.0n_4mb.exe
IPL 3.08
SPL 3.08
kevinalmere said:
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Click to expand...
Click to collapse
If you can go to boot loader, most likely you will be ok. When you plug in the usb port, does the words in the screen change from serial to USB? Once it changes, then flash your official, and then CID unlock your device (this is different from SIM unlock). Then flash to the ROM you want!!
PS: Go read wiki about how to unlock and flash and understand more about your device. http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
kevinalmere said:
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
Click to expand...
Click to collapse
Vista dont like upgrading and stuff...but there is a work around, search the forum and see if you find it. Or try using XP.
okee problem solved working again
thanks for your help!!!
kevinalmere...
How did you resolve the issue I'm having very simular problems and believe it's my Vista OS causing the problem..
Orange SPV M600 G4
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 4.0.0.0
Sorry should explain my issue incase anyone can help.
I attempted an upgrade to WM6 using an Upgrade .Bat from this site. I was slightly impatiant due to not being able to complete the downgrade first anyway the upgrade frose, after a while I canceled the update and carried out a hard re-set... Since then I'm not able to boot nor connect to my desktop via Active sync (WMDC (Vista))
I've followed every instruction I can find but only to be meet with RUU Errors saying can't connect or file open. I can however acces my Bootloader screen and when connection is made the USB symbol shows on the screen of my phone...
Any help would be greatly recieved......
Hello.
I am new here and I have to say, that I have to manage a big problem.
Whats happend?
A few days ago I get an Vodafone branded Kaiser and yesterday I tried to falsh a new unbranded ROM. So downloaded the HardSPL Tool an the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship ROM.
I have connected the Phone via ActiveSync and installed HardSPL first.
Everythings looks fine and I started flashing the new ROM.
While the flashing process was during my PC crashed and the flashing process has been interrupted.
I have started the phone and the PC again but the phone was locked since then.
When I start the phone I get only a screen divided into four colors (red, green, blue and white) without any function.
In the red field I can read
KAIS130
SPL-1.56.0000
CPLD-8
The phone has since no function. I can#t switch it off an I can't use any of the buttons.
If I try to connect the phone with my PC for re-flashing the ROM ActiveSync does connect to the phone and would not be green highlighted.
What I should I do? Who can help me solving this problem?
Many thanks to all, who are willing to help me.
wr450f said:
Hello.
I am new here and I have to say, that I have to manage a big problem.
Whats happend?
A few days ago I get an Vodafone branded Kaiser and yesterday I tried to falsh a new unbranded ROM. So downloaded the HardSPL Tool an the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship ROM.
I have connected the Phone via ActiveSync and installed HardSPL first.
Everythings looks fine and I started flashing the new ROM.
While the flashing process was during my PC crashed and the flashing process has been interrupted.
I have started the phone and the PC again but the phone was locked since then.
When I start the phone I get only a screen divided into four colors (red, green, blue and white) without any function.
In the red field I can read
KAIS130
SPL-1.56.0000
CPLD-8
The phone has since no function. I can#t switch it off an I can't use any of the buttons.
If I try to connect the phone with my PC for re-flashing the ROM ActiveSync does connect to the phone and would not be green highlighted.
What I should I do? Who can help me solving this problem?
Many thanks to all, who are willing to help me.
Click to expand...
Click to collapse
Go to kaiser rom development and read the first thread there. There should be topis about bad flash.
I think this is about bad flash too:
http://forum.xda-developers.com/showthread.php?t=371154
Another thread regarding the problem:
http://forum.xda-developers.com/showthread.php?t=354553
Mikulec said:
Go to kaiser rom development and read the first thread there. There should be topis about bad flash.
I think this is about bad flash too:
http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
You are the GREATEST. Thanks a lot. It works again.
I'll pray for you when I go to bed.
wr450f said:
You are the GREATEST. Thanks a lot. It works again.
I'll pray for you when I go to bed.
Click to expand...
Click to collapse
I am glad to help u and welcome to xda.
PS: MY post no. 500
Hi,
Although this is my first post, I have been lurking for many years.
I have successfully flashed a Kaiser and a Diamond in the past so I feel reasonably confident.
However, I am having real problems with my blackstone. I have followed the instructions until point 5, when I enter bootloader it is showing 1.14000 etc - I then try to follow the rest of the instructions. It will go into the rom updater utility, the screen will go grey and show 0% but then nothing happens and I eventually have to go into recovery.
Any ideas?
Thanks
Caroline
cazlol said:
Hi,
Although this is my first post, I have been lurking for many years.
I have successfully flashed a Kaiser and a Diamond in the past so I feel reasonably confident.
However, I am having real problems with my blackstone. I have followed the instructions until point 5, when I enter bootloader it is showing 1.14000 etc - I then try to follow the rest of the instructions. It will go into the rom updater utility, the screen will go grey and show 0% but then nothing happens and I eventually have to go into recovery.
Any ideas?
Thanks
Caroline
Click to expand...
Click to collapse
Sounds like you haven't installed either HSPL or USPL before trying to flash rom.
I'd recommend going down the HSPL route. (Latest HSPL can be found in my signature). Once downloaded flash to phone then you are ready to flash to cooked roms
Hi,
Thanks for replying. I just tried that and have the same problem.
What have I done wrong??
Caroline
cazlol said:
Hi,
Thanks for replying. I just tried that and have the same problem.
What have I done wrong??
Caroline
Click to expand...
Click to collapse
Go into bootloader. If it says 1.14.0000 you are ready to go to step (5c). When you connect usb cable to pc does the text at bottom change from 'serial' to 'USB'?
Possible problems could be:
1. You haven't disabled anti-virus
2. Drivers on you pc need updated. Download step (1g) and go to (0).
If USPL is successful it should state SPL v 1.15.USPL in bootloader. If HSPL is successful it should state SPL v 1.15 OliNex
Hi,
Well after much swearing at both computer and phone, I managed to get the drivers updated. Many thanks Spartan, it seems that this was the problem as I am flashing Dutty's ROM right now.
Thanks for your help.
Caroline
cazlol said:
Hi,
Well after much swearing at both computer and phone, I managed to get the drivers updated. Many thanks Spartan, it seems that this was the problem as I am flashing Dutty's ROM right now.
Thanks for your help.
Caroline
Click to expand...
Click to collapse
No prob's, just glad you got it sorted