Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
i'm glad i solved the problem.. just entered manually in bootloader then flashed a original qtek rom and it fine now
thanks anyway, hope this help other people in this very situation
bye
cheers from portugal
W4R_M4ST3R said:
Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
Click to expand...
Click to collapse
You can't go from 1 to 3. Re-flashing a stock ROM was a good move.
--M
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
zorrozorro said:
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
Click to expand...
Click to collapse
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
_Nomad_ said:
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
Click to expand...
Click to collapse
How can i upgrade my ROM if i could not connect my phone to the computer! The main problem is that i could not syncronise my phone and my PC.
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
_Nomad_ said:
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
Click to expand...
Click to collapse
Thank you!!
Could you explane me a bit more precise what does it mean bootloader and reflash? Does it mean that i can syncronise phone and computer when i have RGB on my screen?
When you've got your device in bootloader mode just plug it in and start the upgrading procedure
_Nomad_, thank you!
It works now!!
zorrozorro said:
It works now!!
Click to expand...
Click to collapse
Like music to my ears
Related
I'm trying to fix my friend's MDA right now. The problem is, it's stuck on T-Mo splash screen. It can however go to tri-color screen. Can I save this MDA or should I bury it?
Any help would be appreciated
Hi!
At the tri-color screen you should be able to flash it with a new ROM. Just try it, that worked for me after a failed flash.
Cheers
djvw
rockmanneo said:
I'm trying to fix my friend's MDA right now. The problem is, it's stuck on T-Mo splash screen. It can however go to tri-color screen. Can I save this MDA or should I bury it?
Any help would be appreciated
Click to expand...
Click to collapse
I just had the same problem myself, talk about ****ting my pants.
I have a Dutch rom in my Vario and I cid unlocked it and tried installing
a US rom but the phone was dead after it.
In the tri-color screen I tried to load the new 2.26 US rom and then the latest UK rom but both failed with invalid Vendor id or something like that.
So I downloaded the NL rom from here and thnk god it loaded without a problem and the Vario is working again.
Sadly in Dutch but at least it works again, can anyone from Holland help me upgrade to the latest US rom ?.
Dave...
Dave...
Encountered some problem..
It would not connect to ActiveSync from tri-color screen. There is a 'USB' at the bottom screen when I plug in the USB cable, but I don't think the PC recognizes the device.
And the thing is my friend has never CID unlock the thing
He said he just took it overseas and never turned it off, when he got back here the phone went like this.
More help please
rockmanneo said:
Encountered some problem..
It would not connect to ActiveSync from tri-color screen. There is a 'USB' at the bottom screen when I plug in the USB cable, but I don't think the PC recognizes the device.
And the thing is my friend has never CID unlock the thing
He said he just took it overseas and never turned it off, when he got back here the phone went like this.
More help please
Click to expand...
Click to collapse
PC doesn't need to recgonize the device via activesync to flash the Rom.
Try and find your original rom.
Put the phone in the bootloader (canaryscreen aka tri-colored screen).
plug-in your usb plug.
And start the rom update utility.
Regardless of your activesync status it should start updating your mda.
This takes about 10 minutes, and will pause at some stage, don't be alarmed and don't pull the plug !!!
Good luck
the-equinoxe said:
Try and find your original rom.
Put the phone in the bootloader (canaryscreen aka tri-colored screen).
plug-in your usb plug.
And start the rom update utility.
Click to expand...
Click to collapse
Can I update using the latest ROM (2.26)? Why does it have to be original rom?
Regardless of your activesync status it should start updating your mda.
Click to expand...
Click to collapse
Even tho PC cannot detect the phone at all, rom update util still can go thru?
I will try again tonight, last night I tried, 2.26 rom update utility cannot detect the mda
Good luck
Click to expand...
Click to collapse
Thanks :wink:
rockmanneo said:
Can I update using the latest ROM (2.26)? Why does it have to be original rom?
Click to expand...
Click to collapse
It's recomended to go back to the original rom, so you can go back to the point before the problems began..
Even tho PC cannot detect the phone at all, rom update util still can go thru?
I will try again tonight, last night I tried, 2.26 rom update utility cannot detect the mda
Click to expand...
Click to collapse
In canary-screen mode the phone will have an active usb connection, ActiveSync won't detect it however, because the ActiveSync software on the phone is only started when windows-mobile is running (which doesn't occur in boot-loader).
The Rom Upgrade Utility, should be able to detect the phone.
But always make shure the battery has been charged (at least half-charged).
Several people on this forum have revived their semi-bricked phone this way.
Thanks :wink:
Click to expand...
Click to collapse
You're welcome
Hello folks I desperately need help, Ive just bricked my brand spunky new wizard G4 IPL/SPL 2.21.0001. I tried to do a Rom upgrade from shipped Rom to WM6, xm6 by mfrazz. I went through the process to 99% and then the progress meter changed from blue to red 99%, it stood there for awhile and gave the Error code 302. The screen is now in rainbow colours, it doesn’t do nothing. I need help please.
Did you CID unlock ur phone first? ... flash it back to the cingular ship rom. www.htcamerica.net
Madcap180 said:
Did you CID unlock ur phone first? ... flash it back to the cingular ship rom. www.htcamerica.net
Click to expand...
Click to collapse
Thanks for the advise, No I did not CID unlock it, I read some where in the post it’s wasn’t necessery to CID unlock G4 wizard, unless I was day dreaming! I need detail help pls, the wizard is not responding to a any treatment from it current state. It’s in the rainbow coma if I may call it, if I take out the battery it obviously goes off completely. If I put the battery back in the rainbow colours comes back on and it doesn't do anything. In This circumstance, how am I supposed to flash it back to cingular ship rom, please explain? Many thanks
All you need to do is download the official T-Mobile ROM from their site and re-flash it. The fact that you are in the "rainbow" screen is a good thing because that's the bootloader and where you need to be to flash. After that, you may need to go through all the postings about flashing a G4 again a time or 2 because if you had read them you would have already known how to fix this problem.
I HAVE THE SAME PROBLOM!!!! ok can some one please tell me what i need to do to fix this problom im at the rainbow screen and i am just stuck! is there anyway to just get my phone back to normal?????????
First, connect your phone to your PC. Don't use an USB hub, plug it directly into the PC!
Then, start the phone. When it is in "rainbow" mode, just execute the flash utility (the original provider ROM) on your PC to begin the flash process..
This should work!
TheMusicMaster said:
First, connect your phone to your PC. Don't use an USB hub, plug it directly into the PC!
Then, start the phone. When it is in "rainbow" mode, just execute the flash utility (the original provider ROM) on your PC to begin the flash process..
This should work!
Click to expand...
Click to collapse
I can confirm that this methods almost always work as i had an experience like this last night.
Doomer D. Great said:
I can confirm that this methods almost always work as i had an experience like this last night.
Click to expand...
Click to collapse
what can be done when this doesn't work? i have a message posted with details of my issue.
http://forum.xda-developers.com/showthread.php?t=313817
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
Hello.
I am new here and I have to say, that I have to manage a big problem.
Whats happend?
A few days ago I get an Vodafone branded Kaiser and yesterday I tried to falsh a new unbranded ROM. So downloaded the HardSPL Tool an the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship ROM.
I have connected the Phone via ActiveSync and installed HardSPL first.
Everythings looks fine and I started flashing the new ROM.
While the flashing process was during my PC crashed and the flashing process has been interrupted.
I have started the phone and the PC again but the phone was locked since then.
When I start the phone I get only a screen divided into four colors (red, green, blue and white) without any function.
In the red field I can read
KAIS130
SPL-1.56.0000
CPLD-8
The phone has since no function. I can#t switch it off an I can't use any of the buttons.
If I try to connect the phone with my PC for re-flashing the ROM ActiveSync does connect to the phone and would not be green highlighted.
What I should I do? Who can help me solving this problem?
Many thanks to all, who are willing to help me.
wr450f said:
Hello.
I am new here and I have to say, that I have to manage a big problem.
Whats happend?
A few days ago I get an Vodafone branded Kaiser and yesterday I tried to falsh a new unbranded ROM. So downloaded the HardSPL Tool an the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship ROM.
I have connected the Phone via ActiveSync and installed HardSPL first.
Everythings looks fine and I started flashing the new ROM.
While the flashing process was during my PC crashed and the flashing process has been interrupted.
I have started the phone and the PC again but the phone was locked since then.
When I start the phone I get only a screen divided into four colors (red, green, blue and white) without any function.
In the red field I can read
KAIS130
SPL-1.56.0000
CPLD-8
The phone has since no function. I can#t switch it off an I can't use any of the buttons.
If I try to connect the phone with my PC for re-flashing the ROM ActiveSync does connect to the phone and would not be green highlighted.
What I should I do? Who can help me solving this problem?
Many thanks to all, who are willing to help me.
Click to expand...
Click to collapse
Go to kaiser rom development and read the first thread there. There should be topis about bad flash.
I think this is about bad flash too:
http://forum.xda-developers.com/showthread.php?t=371154
Another thread regarding the problem:
http://forum.xda-developers.com/showthread.php?t=354553
Mikulec said:
Go to kaiser rom development and read the first thread there. There should be topis about bad flash.
I think this is about bad flash too:
http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
You are the GREATEST. Thanks a lot. It works again.
I'll pray for you when I go to bed.
wr450f said:
You are the GREATEST. Thanks a lot. It works again.
I'll pray for you when I go to bed.
Click to expand...
Click to collapse
I am glad to help u and welcome to xda.
PS: MY post no. 500
ok, so I tried to upgrade to 1.56 (stock), and yes I now have the dodgy looking screen and phone is stuck in 'Phone Off' mode.
I didn't think I needed to do anything other than run the exe from HTC.
so, anyway..yes I'm screwed.
I've got the list of instructions from an earlier post about flashing 1.56, and am trying to follow them (seems my phone has Olinex1.14 on it - which I've never used as I've never flashed this phone before)
but..I can't connect to my phone, when I plug the usb cable in, I get the screen which asks me which type of connections I want Active sync, disc drive etc, but the screen on my phone is totally unresponsive. the screen then disappears and I'm nowhere...
If I can't connect to my phone, how do I run the file to flash back to 1.14 as per the instructions?
thanks
hm i would try it in bootloader mode?
USB
twisted-pixel said:
ok, so I tried to upgrade to 1.56 (stock), and yes I now have the dodgy looking screen and phone is stuck in 'Phone Off' mode.
I didn't think I needed to do anything other than run the exe from HTC.
so, anyway..yes I'm screwed.
I've got the list of instructions from an earlier post about flashing 1.56, and am trying to follow them (seems my phone has Olinex1.14 on it - which I've never used as I've never flashed this phone before)
but..I can't connect to my phone, when I plug the usb cable in, I get the screen which asks me which type of connections I want Active sync, disc drive etc, but the screen on my phone is totally unresponsive. the screen then disappears and I'm nowhere...
If I can't connect to my phone, how do I run the file to flash back to 1.14 as per the instructions?
thanks
Click to expand...
Click to collapse
If you take the battery out and make sure the USB is not connected.
After a few seconds, put the battery back in.
Next press the down button on the side of the phone and keep it pressed, press the power button as normal.
Does anything appear on the screen?
Next, if you get the coloured screen with 'Serial' at the bottom, if you plug in the USB cable and connect to a PC, does 'Serial' change to read 'USB'.
If it does all of this, your phone is not dead.
I've had to try a different machine..which is working....thank god.
but the issue now is that our virus software is preventing me from downloading USPL2.5, is there another way to to use this file? I know that people have experience issues with this before (although not necessarily this particular file) and they have used a wrapper to bypass the virus protection pop up
ok..ignore that...I don't need it, my phone is not CID locked.
thanks to everyone though. I was in major panic mode for a while
I was going to try the Stock HTC ROM upgrade tonight, but my phone is an early Orange no splash screen or orange branding but it definately locked to orange....
do I have to unlock it prior to doing even the HTC ROM upgrade?
Geeba said:
I was going to try the Stock HTC ROM upgrade tonight, but my phone is an early Orange no splash screen or orange branding but it definately locked to orange....
do I have to unlock it prior to doing even the HTC ROM upgrade?
Click to expand...
Click to collapse
You may have to. Just try the rom upgrade. If it yells something about an "invalid vendor ID" just use USPL to apply the rom upgrade. If you need information on how look at the guide in my signature.
cRaCKwHoRe said:
You may have to. Just try the rom upgrade. If it yells something about an "invalid vendor ID" just use USPL to apply the rom upgrade. If you need information on how look at the guide in my signature.
Click to expand...
Click to collapse
Hey there i had a quick question my telstra HD comes in today. Can i just run the USPL and then load the updated ROM your talking bot off the site? Other wise i was going to load a Dutty's. Sorry to go off topic
cRaCKwHoRe said:
You may have to. Just try the rom upgrade. If it yells something about an "invalid vendor ID" just use USPL to apply the rom upgrade. If you need information on how look at the guide in my signature.
Click to expand...
Click to collapse
Thanx crackwhore! appreciate the pointers... pretty new to phones... I tend to hack consoles etc!
ratchetjaw said:
Hey there i had a quick question my telstra HD comes in today. Can i just run the USPL and then load the updated ROM your talking bot off the site? Other wise i was going to load a Dutty's. Sorry to go off topic
Click to expand...
Click to collapse
Yeah you can load any 1.56 rom whether it is cooked or original using USPL (if your SPL is 1.54.0000 in the bootloader).
cRaCKwHoRe said:
Yeah you can load any 1.56 rom whether it is cooked or original using USPL (if your SPL is 1.54.0000 in the bootloader).
Click to expand...
Click to collapse
Ok thanks for the quick response. I am going t follow your sticky once i get home and get the phone. If i dont have he 1.54.0000 i will put it on there. Kind of excited and nervous at the same time lol
ratchetjaw said:
Ok thanks for the quick response. I am going t follow your sticky once i get home and get the phone. If i dont have he 1.54.0000 i will put it on there. Kind of excited and nervous at the same time lol
Click to expand...
Click to collapse
Understood I was too my first time...