Hi guys,
My X1 has developed a really annoying fault. It seems the enter key (the optical joystick button) is getting randomly pressed, which totally messes up my texting (it creates a new line) and my calls (it puts the phone in and out of hold).
This is not fixed by using the "disable optical joystick" option, which just stops the joystick functionality, and not the actual press Enter functionality.
Is there some way i can fiddle with the registry etc, perhaps with Total commander, and stop this key doing anything at all? it really is life or death for the phone.
Thanks for any help you can give.
John
If it actually is a hardware problem that produces that input you could use an application like AEButton Plus to make that key only press enter when you press it three times in a row, or long, and to do nothing otherwise. That way you could actually still use the key.
Related
The hardware power button on the Kaiser is the worst I've ever used... (Do HTC actually do any user-testing?)
Can anyone point me in the direction of source code or an application that will re-map the power (on/off) to another hardware button? The rather useless "OK" button next to the scroll-wheel would be a nice alternative.
I'm aware of one or two applications that will suspend a pocket pc (which you can obviously map to a hardware button) but none that will allow bringing the device out of suspend via a specific, designated button.
Cheers,
Steve
I quite like the position of the on/off button it makes sure that you dont switch the phone on/off without meaning to, the camera button to me seems a tad too prominent and lends to getting caught more so than most buttons but thats what the soft lock is for (press and hold red phone, for those that didn't know).
I am pretty sure there are going to be means to do what you want but not until the phones are more discovered.
Russ
Thanks.
I'm aware of the option to lock the thing with the call-end button. But that doesn't turn the phone off...
In the past I've stuffed PDAs into the waterproof plastic cases you can buy for navgational use outdoors, but the power button on the Kaiser is so inaccessible that using it in one of these cases makes turning it on or off pretty much impossible.
The ideal solution would be some software that maps to the centre button of the D-Pad, with a press-and-hold turning the device on and off. I could write the necessary code to map the button and turn the phone off, but I've no idea what's neccessary to turn it on again!
Steve
Steve is right!
I'd pay for a utility that gave me _full_ access to remap _all_ of the buttons to _any_ function including power.
Does anyone have the reg code to access the "inaccessible" buttons on the Tilt (I don't want to install a different rom, but I don't mind editing the registry...)
tia
I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.
For some reason, my powerbutton is malfunctioning and there is no way to repair it. I wonder if there is a way to change the settings in the phone and not allow the power button when being long pressed to try to reboot the phone. Does somebody know how to tweak the phone and get this result?
Thank you.
I think pshutxp may help you here.
If I recall correctly you can set it to trigger the shutdown menu on a long press of the end key. You can then cancel the shutdown if the key has been pressed by mistake.
doubt it think it's harder connected as
even if my phone freeze 100% up
and that would mean that any software button setting
is not being enforced as the system is not responding
long press reset the phone
so I'd take that as it's not controlled
by windows mobile
I've remembered what it was now... it's not a feature of pshutxp, it was Schaps Advanced Configuration Tool that I was playing around with.
Use the key mapping feature to assign a program to the long press power key setting. I tried using this with pshutxp in the past.
Davey101 said:
I've remembered what it was now... it's not a feature of pshutxp, it was Schaps Advanced Configuration Tool that I was playing around with.
Use the key mapping feature to assign a program to the long press power key setting. I tried using this with pshutxp in the past.
Click to expand...
Click to collapse
I have to really thank you Dave!
I ended up fixing it by re mapping the power key using the Adv. config program and making the long press power key to call the Tasks program. I was in need of a program that was going to do nothing like the Tasks program which actually runs in the background.
Before, some months ago I used this same re map of the hard keys but calling a Power off program and it was very annoying. Key here was to choose a program like this one.
My kaisers power button has split in half on me, Im wondering if i can change the PTT button to be the power button thru maybe a registry change or possibly another alternative. As u kno the power button blacks the screen and locks it so u cant push buttons, and i really dont want to dial in my pocket. Can someone please help me???? I dont want to throw away a prefectly good phone bcuz of a poorly made button. Thank you guys
well i took my phone apart and swapped the camera buton for the power button, but who knows how long this one will last. Does anyone know of any reg hacks, or software that will lock the phone on a button press maybe PTT button?
Very good that you have the technical ability to do what you did
In order to not use the power button so much I advise you to install a lock utility like S2U2 for example (I suggest it because I use it and it has a very nice interface). There are also smaller and lighter apps around. Just have a look.
In addition to that you have to change the key lock settings of the phone to "lock keys if phone is locked". This will enable you to wake the phone up with any key on the phone. In order to not activate any functions of the phone with this setting you have to set the timeout of S2U2 on wakeup to 0. This way S2U2 kicks in before any of the key functions come in.
By doing these things I am able to have a phone that does not dial in my pocket and I do not use the power button to wake it up. I use the wheel.
I hope this helps.
I'm trying to remap my End Call button so I can use it to "Go Home", and End Calls. I don't want that button to put my phone to sleep, just the side power button. I want to also free up my IE button for use with anything else I might want it bound too.
In my ventures to do so, I've noticed that both the End Call button and Power button are mapped to the same keymap. I had thought I had changed the Power button but when I tried to end a call, the red button just puts the phone to sleep, which is exactly what I wanted my side power button to do while I'm on a call.
Is this a bug, or a "feature" in the kernel?
im pretty sure its part of the kernel, it has been there since the donut days (the old keymap was crazy volume up was the menu button, volume down was back)
it is partly due to the fact that the vogue has very few buttons, the kaiser was a device that just worked with our kernels at first.
i think even changing the buttons in atools will not change the kernel key stacks like your asking for
although l1q1d being the creator of Atools would know a lot better than I would
I've been looking at the querty.kl file, trying to understand the keymaps, and what they're associated too... Anyway of running a program that captures key presses and prints out the associated keymap for that key press?
Hey! Post from the grave!
Did you have any luck ??
I was also hoping someone knew how to go about this.
I know there are ways to remap keys, but I'm stuck in a browser, and all I can do it put my kaiser to sleep.
I even tried atools keyboard remapper to no avail (awesome tool btw).
It's no fun when you can't exit applications d:
I don't mean to double post, was just hoping someone could answer this.
Krazy-Killa did you have any luck?