Related
Hi,
I've recently upgraded to the latest radio ROM, no problems there (but it did cause a hard-reset). Now I'm trying to flash FInixNOver's latest ROM. The problem: I run ROMUpdateUtility, the device enteres bootloader mode and... nothing! No flashing, no errors, no nothing. The upgrade fails and I'm stuck in bootloader mode. The weird thing is... soft reset works and I can boot the (already installed) ROM just fine.
Any ideas...?
Thanks!
In which phase are you stuck? some bootloaders leave my trinity with the screen with the colored bands, and then refuse to continue. I launch them again (with some anxiety) and everything continues correctly. I had this probably 20 times and never a problem - but i don't understand why. It is probably a timing matter....
I'm stuck in the three-colour screen. A soft reset boots up the device properly, but it does not flash. However, I've successfully managed to flash by using the SD card method.
i always get stuck, as i was saying, in the three color screen. The windows bootloader complains it cannot continue, i simply relaunch the windows bootloader without doing anything on the trinity. Actually, i doubt it has some relation with the bepe's kitchen, since it didn't happen with NetDrg french rom....but i have exactly the same problem with the present (great) tnyynt roms...good anyway you had solved your problem somehow. it also could depend on the Hard-SPL version you are using.
Yeah, I thought the SPL could be the cause.
However, knowing that the SD card method works is reassuring.
Thanks.
my hard-spl comes from olipro:
http://forum.xda-developers.com/showthread.php?t=299659
Regards,
I had the exact same issue, i re-installed my Olipro Hard SPL v3.2 (if you are running a 3600i be sure to get the specific version).
Tried flash once again, all was fine!
Other thought, it has happened to me, when it is in the bootloader, tri-colour, just run the upgrade again. i had that with some ROMs.
I tried that many times, it didn't work.
Thanks for the reply, though.
Some days ago, i've flashed my phone to get an "up-to-date" ROM. I chose "PDACornerIllusion 21139" of 2009.03.06. All went fine excepting the keyboard of my GPS wont work anymore (dunno why of course), so i re-flashed with another ROM.
I was surprised that my phone kept the CornerIllusion BootScreen, but i didnt care.
All of a sudden, after having soft reset the ROM i chose (the 2nd one), for an installation of some proggie. The ROM restart as brand new asking me to reset the screen, the clock, date etc... losing all my content and customizations. Then i couldnt sync with Outlook after the first sync i've done minutes ago (error code 800004005). I've decided to soft-reset the phone, and now, TF3D wont even start, (it selft tries to start several times, then gives up), AND the programs lists is all broken, no shortcuts left and the games folder is named *h1/4Eg+รง^, nothing works anymore.
I flashed with about 4 roms (including Aztor one), resulting in the same mess.
Does it have something to do with the first one "PDACornerIllusion 21139" and its still remaining BootScreen?
Can i flash my phone from its roots, to get rid of this ?
As it's maybe not the "fault" of PDACornerIllusion, i write this in this section of the Diamond general thread and made a double post at PDACornerIllusion development thread
I suggest you perform a hard reset before flashing any new rom and that you use the traditional "flash-from-PC-using-ActiveSync-connection" method to flash.
And above all I wish you luck!
What was the other ROM you flashed? I am curious.
rondol1 suggests you hard reset prior to flashing a new rom. I suggest you hard reset after flashing a new rom. Net result is probaby much the same. You could even just do a hard reset now with whatever is loaded and things will probably improve. Main thing is...whenever you flash a rom do a hard reset straight after loading it. I always do this religiously and with the exception of one recent rom I tried I have never had a problem.
First of all, thank you both for trying to suggest hints, i really appreciate it.
I've never hard reset the ROM before or after having installed a new one. I never have a problem before.
For the last 2 months, i was on NEON 1.28, then i've decided it was time to update seeing the new features of the more up-to-date ROMs
I've just reflashed it (an hour ago) with PDACornerIllusion 21139, i've hard reseted before and after. let's see how it turns out ....
I've tried NATALY, CLOUDY, MORNA & AZTOR, no luck with any of them, all died after a soft reset or after the 1st sync (reconnecting for a 2nd sync).
Maybe the problem comes from the very root of the phone (like BIOS in a PC, dunno), maybe something in there got corrupted. How to repair it if my guess exists and is it repairable?
dunnno said:
I've never hard reset the ROM before or after having installed a new one.
Click to expand...
Click to collapse
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
logger said:
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
Click to expand...
Click to collapse
completely agree with logger - hard reset after you flash any ROM. I haven't used PDACorner - so can't say for sure... but do the flash via CustomRUU once... when the new ROM is flashed... do a hard reset as soon as it's complete..
good luck!
let's see then, >>>>crossing fingers<<<<
I've had this happen a lot lately as well. Might have something to do with the newer SYS? Anyway, hard reseting hasn't always fixed it for me. However, flashing back to the Sprint stock ROM (or HTC stock for you GSM guys) then flashing a new custom ROM has always done the trick. Maybe because the stock ROMs are bigger and "clean" out the memory somehow? At any rate, flash stock and then you're good to go. No permanent damage.
no luck, after a 2nd soft-reset, the phone is asking "touch the screen to configure for the 1sy use blablabla", all data's lost again & again...
what do you mean by stock Rom ? the rom that came with my phone when i've bought it ?
I've got the same problem with the Diamond rebooting like a hard-reset. But I always did a hard-reset after a fresh install. I blamed it on the rom and tried several others, including donsalari's "Clean Basic Rom", the Gen.Y Sense 2.1 and 2.5 versions and an older Aztor rom. Same problem every time, the first reboot after changing the device locale works fine, then I set the whole phone up properly and on the next reboot it will come up as if had performed a hard reset.
Additionally, the file system on my internal storage got corrupted somehow, had to reformat. At some point, I also had the impression that data on the phone memory got lost gradually. First the Contact's numbers got replaced by some nonsense characters, then there were numbers and contacts missing, and finally I had no contacts at all. ActiveSync stopped working so I was in the middle of a trip without my phonebook...
I've got two hypotheses:
1) The Gen.Y bootloader messed with the phone (Had tried the Sense 2.5 Gen.Y rom before donsalari's)
2) Flash controller or Flash itself is broken
@dunnno: I suggest you rename the thread to something like "diamond hard-resets on 2nd reboot after rom install"
edit: oops, just realised I resurrected a very old thread... Maybe there's a fix already?
My diamond still suffers from this problem. I tried it again and again with different roms but everytime, at some point all my configuration is lost and the diamond reboots like after a fresh install. Can anyone please help?
I'm having this problem as well :|
Grr, I have to rely on my phone for so much, but it just doesn't want to work correctly.
Help is immensely appreciated.
Well, I got mine to work, I just flashed the stock HTC ROM and everything has gone back to normal. H3PO, I suggest you give that a shot if you are still having problems.
I had these problems when I first started flashing my Diamond with custom roms.
Now I always flash my carrier stock rom first, then hard reset, then flash custom rom, then hard reset and I never have any problems. I have no idea why flashing the stock rom first stops the problems but I haven't had any problems with the dozens of roms I've flashed using this method.
Also I always flash from internal storage, but others prefer using MTTY
I still have some problems with the Contact Database, but flashing some stock O2 Rom solved the "reboot as new" problem.
I have problem since I try to find new good ROM. I don't know exactly the root cause, but every time when I flash the ROM it's stable maybe for one or two soft reset. Everything is normaly installed on device. After soft reset it seems like new loading of new ROM. And going around around. I try instaled many types of ROM and also radios. But any combination is not stable.
I aslo try hard reset many times, but it's not helpfull.
It seems like some old file, which is not deleted during flashing ROM and doing mess in the new ROM. This start after instalation ROM Gen.Y-Manila_v2.1_VGA.
But as I written it doing after instalation of any ROM.
Could you please help me?
I think its fixed. If you have similar problem you can go here.
http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22
One day working without any problem and freezing.
Thank you to c_shekhar, you're great, man!!
Hi people,
I recently decided to update my touch diamond to wm6.5.
Already got HardSPL 1.93 some time ago together with the swift rom.
Now I downloaded this rom:
BOGYSOFT WM6.5 Build 23060
http://forum.xda-developers.com/showthread.php?t=552162
And followed the instructions carefully, put the rom on the internal storage and started the update process as usual.
After it had finished installing I already noticed it took the phone way to long to completely boot into windows.
After a few reinstalls I finally got it to work but it was very slow and often I couldnt even unlock the damn thing.
At this point I cant even get into windows anymore.
Now ofcourse I want this rom removed from my phone, but is that even possible when I cant boot it into windows??
I need to have an USB connection to put on another rom, so is that possible without windows?
Thanks for your help!
I got the same problem. anybody help us?
I had a problem with an earlier version of this ROM, and the fix turned out to be quite simple.
I flashed my stock ROM back on and then re-flashed BOGYSOFT, ever since then been no problems what so ever.
I had flashed a few different ROM's to try before this it's possible I suppose that there may of been some corruption with repeated flashing.
I think the hardspl is affecting the phone's stability, cause returned back to the stock after flashing some cooked roms and it's bad more than before.....
any news?
mb76 said:
I had a problem with an earlier version of this ROM, and the fix turned out to be quite simple.
I flashed my stock ROM back on and then re-flashed BOGYSOFT, ever since then been no problems what so ever.
I had flashed a few different ROM's to try before this it's possible I suppose that there may of been some corruption with repeated flashing.
Click to expand...
Click to collapse
Yes but dont you need to acces the phones internal storage to add a new rom?
Cause I dont know how to do that when I'm not even able to acces windows.
Anybody?
Is my phone bricked or is there a way to connect to the internal storage without WM?
Now it doesnt even boot the rom anymore,
The image has even dissapeared from my internal storage.
It is now stuck in the Bootloader telling me to trigger the USB host.
Any ideas?
My Diamond has been pretty unreliable over the last couple of days, but I used MTTY to format the internal flash, loaded the latest Gen.Y ROM (I don't think it really matters which ROM tho) and now it works perfectly again. Plus to me it seems a bit faster. Anyway I couldn't be happier.
If you can get into the bootloader with USB I'd certainly give the instructions in this flash a go (post 3 or 4 only if you're on Windows XP).
http://forum.xda-developers.com/showthread.php?t=540290
thanks mate!
After i flash rom. When my HD phone hang, so take out the battery and put it back to restart it .. the whole phone will reset to default..... just same like brand new phone without setting. it happen many times, what happen on my HD ?
Have you tried using the red reset button next to the SD card slot?
Yes i do , i try many kind of restart , but when my HD hang ... i restart it. it will back to default setting
if it happens always with the same rom, i suggest you try to change rom and see if that happens again. if it happens with different roms, you should flash back your stock default rom and then proceed flashing another custom rom and see if it does it again. Many times reverting to stock rom from time to time has been proven to solve some weird behaviours.
I would suggest flashing stock rom first before following this guide to flash a cooked rom again
crashDebug said:
if it happens always with the same rom, i suggest you try to change rom and see if that happens again. if it happens with different roms, you should flash back your stock default rom and then proceed flashing another custom rom and see if it does it again. Many times reverting to stock rom from time to time has been proven to solve some weird behaviours.
Click to expand...
Click to collapse
Thank you for suggest, i will try to find the original rom to flash and try it, see can solve my nightmare or not
Fallen Spartan said:
I would suggest flashing stock rom first before following this guide to flash a cooked rom again
Click to expand...
Click to collapse
erm.. i have read it.. but a bit confuse on that
natureborn said:
erm.. i have read it.. but a bit confuse on that
Click to expand...
Click to collapse
Did you use either HSPL or USPL before flashing rom? You will need to use one of these or your HD will hang. If you are having difficulty with that guide, post your query in that thread
I have got mine reset to default too.
My rom is Xannytech 2.2
HD Hangs. After a reset, it returns to the setup progress.
The setup progress is the setup progress of installation.
After the installation, calibrate the screen, set time zone.
the rom returns to function!!!
I am lucky I have saved all my data in the SD card, and backup my contact list and sms in Myphone.
It is quite a good auto recovery system.
The only application I installed is chinese font and htc 6.1 chinese input method.
Before the HD phone hangs, it is running opera 9.7.
I have ~ 500 contacts. and 300 sms..
As per Fallen Spartan's question above, have you used either USPL or HSPL before you flashed?
hktotti said:
I have got mine reset to default too.
My rom is Xannytech 2.2
HD Hangs. After a reset, it returns to the setup progress.
The setup progress is the setup progress of installation.
After the installation, calibrate the screen, set time zone.
the rom returns to function!!!
I am lucky I have saved all my data in the SD card, and backup my contact list and sms in Myphone.
It is quite a good auto recovery system.
The only application I installed is chinese font and htc 6.1 chinese input method.
Before the HD phone hangs, it is running opera 9.7.
I have ~ 500 contacts. and 300 sms..
Click to expand...
Click to collapse
Whats your SPL in bootloader? Was USPL or HSPL successful? Did you hard reset after flashing rom?
I had exactly the same problem after using xannys 2.2 rom. I'm using Hardspl. Even reflashed HSPL but it didnt help.
What did help was to flash another rom (Xnors) multiple times. Since that my phone did not hang again.
Z3rO` said:
I had exactly the same problem after using xannys 2.2 rom. I'm using Hardspl. Even reflashed HSPL but it didnt help.
What did help was to flash another rom (Xnors) multiple times. Since that my phone did not hang again.
Click to expand...
Click to collapse
Alternatively flash stock rom before flashing another cooked rom. This method appears to solve a number of reportewd issues
Z3rO` said:
I had exactly the same problem after using xannys 2.2 rom. I'm using Hardspl. Even reflashed HSPL but it didnt help.
What did help was to flash another rom (Xnors) multiple times. Since that my phone did not hang again.
Click to expand...
Click to collapse
I am sure Xannys 2.2 have this problem , i have already flash many many rom for more than one year is no problem.
The same happens to me but with all the roms (Xanny, Sh3lby 1.10/1.9/1.7 (although they were working fine), Xnor and PDAViet).
Do you know where I can find a stock rom?
- Bya -
EDIT: Found on the HTC official website and look here for the method.
EDIT2: Owned by Clyde ^^"
Bya said:
The same happens to me but with all the roms (Xanny, Sh3lby 1.10/1.9/1.7 (although they were working fine), Xnor and PDAViet).
Do you know where I can find a stock rom?
- Bya -
Click to expand...
Click to collapse
You can look here
Actually problems appear when I use Myphone. 2 options:
- Either it finished and then it freezes randomly from then, hard-reset itself, never complete it, reboot and get stuck on the black screen with radio information.
- Either it doesn't finish and when I try to exit/stop the program, it freezes and same than above happens.
Trying to get back to stock rom but battery's still not at 50% charge. So waiting a bit and playing with it without using myphone to see if it get blocked again...
- Bya -
Fallen Spartan said:
Did you use either HSPL or USPL before flashing rom? You will need to use one of these or your HD will hang. If you are having difficulty with that guide, post your query in that thread
Click to expand...
Click to collapse
Yes, i use HSPL (ISO-8859-1''HSPLWrapper_Blackstone_156OliNex ) , then the rom i flash is RUU_Dutty's_HD_WM6.5_5_Leo_R7 .
Well , i try to combine some of the opinion and flash rom again, this is what i do :
Step 1. I flash back the original rom ( RUU_BlackStone_hTC_Asia_WWE_1.18.707.3_Radio_52.49a.25.26_1.09.25.14_Ship ) . then hard reset twice.
Step 2. Then install HSPL (ISO-8859-1''HSPLWrapper_Blackstone_156OliNex ), then reset twice .
Step 3. Flash custom rom ( RUU_Dutty's_HD_WM6.5_5_Leo_R7 ), the reset twice .
Today is my second day after flash... so not sure will have the same old problem happen .... i wish nothing happen and can use smooth
I experienced the same issue with Miri V 14.0 two days ago. I never believe it does happen until it happened to me despite the fact that I always flash a custom rom before flashing any cooked rom.
Mine first came up with a message that I need to reset my device to factory settings because I have installed an application that is not compatible or not signed on my phone, message was when I performed a soft rest after phone freeze.