Related
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Claus72 said:
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Click to expand...
Click to collapse
I dont know much, but i think its that you tried to downgrade withe a wizard that dosent support downgradeing. i.e spl/ipl ending with .001 i will just say try and get a replacement.
This is exactly why there are so many replies to newbies saying "Read, Read, Read and then read some more".
I'd agree with the theory that your device was a G4 chip (which should never be flashed with a 1.x Rom).
If he can get the boot loader then he can flash the previous rom back :wink:
i am not sure which key u have to press. best man to ask is buzz lightyear
If he can get the boot loader then he can flash the previous rom back :wink:
i am not sure which key u have to press. best man to ask is buzz lightyear
The problem is that I can't enter in BootLoader mode. I try with camera+reset and camera+voice+reset but the screen is always black.
Can't you return it to Imate with a story that the battery was empty, you wanted to charge it, but it stay dead?
I hope you got warranty.
Claus72 said:
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Click to expand...
Click to collapse
I got the same problem after upgrade my MDA Vario(T-mobile NL) by using RUU_Prodigy_2170702_217_20710_TMO_US.exe from the ftp.
It looks like no power at all. Anyone knows how to solve this?
Hi friends,
I am very new to upgrading\downgrading pc phones. I was trying to upgrade my wizard to upload diffirent language ROM, using this method :-
http://forum.xda-developers.com/viewtopic.php?t=56088
After some tries, I succeeded to upgrade rom, but after this power on the wizard and it stuck into startup screen.
If I press Camera + Power swich it shows three colour screen and some text :
IPL 2.16. 0001
SPL 2.16 0001
I think my device was CID locked and G4, and that is why I have a dead wizard.
I have backed up the phone before upgrading with wizBackup.exe and I have back files on my hard disk. I dont know how to restore rom from these backup files. :?: :?: :?:
Please help me to revive my PC.
Thanks in advance
Singh06 said:
Hi friends,
I am very new to upgrading\downgrading pc phones. I was trying to upgrade my wizard to upload diffirent language ROM, using this method :-
http://forum.xda-developers.com/viewtopic.php?t=56088
After some tries, I succeeded to upgrade rom, but after this power on the wizard and it stuck into startup screen.
If I press Camera + Power swich it shows three colour screen and some text :
IPL 2.16. 0001
SPL 2.16 0001
I think my device was CID locked and G4, and that is why I have a dead wizard.
I have backed up the phone before upgrading with wizBackup.exe and I have back files on my hard disk. I dont know how to restore rom from these backup files. :?: :?: :?:
Please help me to revive my PC.
Thanks in advance
Click to expand...
Click to collapse
Your phone is not dead!!!
If you can get to the three color sceen then your botloader is intact (and preserving the bootloader was the point with the tutorial that you followed).
Your phone is CID locked and is G4, that's right, but this is NOT the reason for the problem. The tutorial you followed, which incidentally I wrote, deals with CID locked G4 phone like yours.
The problem you had is probably due to a not correctly cooked rom.
Anyway, don't worry. You got the three colors screen so you can connect your phone to USB (even if activesync won't recognise it) and flash your factory rom (the one you were trying to replace). Don't need to use your backup: simply download the original rom from the manufacturer/operator site.
bye
After many tries now my phone is working again,
I downloaded RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship from internet then cooked its nk.nbf file.
then uploaded the rom and phone is working again. Thanks for your help
Singh06 said:
After many tries now my phone is working again,
I downloaded RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship from internet then cooked its nk.nbf file.
then uploaded the rom and phone is working again. Thanks for your help
Click to expand...
Click to collapse
I glad you worked it out!
Bye
hello. I have similar problem. I upgraded my wizard to AKU2.3 and now phone doesn't start. It start showing splash screen with the information:
IPL:2.24
SPL:2.24
GSM:02.25.11
OS:2.24.10.1
HOW to fix this problem ?
hi guys
i have qtek wiza200 today i'm use MrClean_RUU_WIZARD_224a_AKU23_WWE.zip after flashing my phone turn on and installing all soft and restart and dead my phone. i'm push camera+power+reset i can't enter to boot mode. help me to repair my cellphone and how resolve my problem. my phone forever dead????
thanks a lot
Hi everyone! I am badly need help to fix my MDA. My MDA stuck when it boot up to T-mobile white screen. I tried to do hard reset by pressing and holding Conn Manager and Voiddial buttons while pressing reset then press Send. I got and message
Format FAT Partition
Format is Failed
Now I am still able to flsh with any ROM but I just doing the same thing, stuck on boot screen. Is it the end of my MDA? Please hel
Is it realy no one can help?
I don't believe that no one can help me even a command.
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
I don't get it
Johnnnnnnnnnny said:
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
Click to expand...
Click to collapse
What should I do? any rom for me to flash to solve this problem?
You could flash any originaly ROM with write IPL/SPL
and quicky. If the battery will turn off. the Wizard will bricked
I flash with right rom
Johnnnnnnnnnny said:
You could flash any originaly ROM with write IPL/SPL
and quicky. If the battery will turn off. the Wizard will bricked
Click to expand...
Click to collapse
I flashed with T-mobile ROM 2.26. It went thru 100% but when the device reboot, It just stuck on the T-mobile boot screen wich saying
IPL: 2.26
SPL: 2.26
GSM: 02.25.11
OS: 2.26.10.2
Finally
Finally I got my MDA fix.
Re: Finally
KhMeRA said:
Finally I got my MDA fix.
Click to expand...
Click to collapse
Please tell everyone what you did to fix your problem.
Molski
he was in bootloader.. He hasn´t brick her phone by wrong xG IPL/SPL
Re: Finally
molski said:
KhMeRA said:
Finally I got my MDA fix.
Click to expand...
Click to collapse
Please tell everyone what you did to fix your problem.
Molski
Click to expand...
Click to collapse
Just follow this link http://forum.xda-developers.com/viewtopic.php?t=62268&start=0&postdays=0&postorder=asc&highlight
please tell us whate happend (fixed or no )
sifreen said:
please tell us whate happend (fixed or no )
Click to expand...
Click to collapse
Read post #8 on the 1st page.
my helard p 4350
ipl 1.08.0001
spl 1.08.0001
i try to flash custom room so that happened
and when i try to flash any room its display invaild update tool
stuck on boot loader what can i do
plz advise me
thanx for ur cooperation
try this thread. read the WHOLE thread and carefully:
http://forum.xda-developers.com/showthread.php?t=417930
mr_guitar_eg said:
my helard p 4350
ipl 1.08.0001
spl 1.08.0001
i try to flash custom room so that happened
and when i try to flash any room its display invaild update tool
stuck on boot loader what can i do
plz advise me
thanx for ur cooperation
Click to expand...
Click to collapse
you could also try this:
Originally Posted by ivanmmj
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
In his case, the goldcard is the answer. He did not heed the warnings about flashing a phone with an SPL/IPL lower than 4.
ivanmmj said:
In his case, the goldcard is the answer. He did not heed the warnings about flashing a phone with an SPL/IPL lower than 4.
Click to expand...
Click to collapse
thats what i thought.
what the gold card
actually i falsh a new room through hard spl then i try to falsh another one through ruu,
but now when i go through bootloader and the three coloure displayed i cant flash any rom cuz its stopped at 0% and the msg invalid,,,,,,,,,,,,,
so ?
What did you flash the second time? It broke your SPL and IPL.
Search for the word Goldcard.
spacemonkey333 said:
try this thread. read the WHOLE thread and carefully:
http://forum.xda-developers.com/showthread.php?t=417930
Click to expand...
Click to collapse
i gave him the goldcard link already
thanx for the link mr but it must need a memory card
is that right
and the steps is not clearly
plz any one help me
[email protected] plz contact me via mssenger
Br
is there any way to get back my device gold card doesnt work
That's the only known method. If it's not working properly, make sure you're following the steps properly. If it still doesn't work, then it's repair time... Sorry.
Done ,, gold card is great
thanx my friends
hi...
i need some help here...
i'm using kaiser TYTN 2...
WM 6.1
ROM ver. : 3.29.707.0
radio ver : 1.65.16.25
protocol ver : 25.83.40.02H
any ROM i can flash now (i want to upgrade my phone, so slow)
how to flash ROM?
can i upgrade to WM6.5?
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Blinkydamo said:
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Click to expand...
Click to collapse
sorry...what mean by stuck on bootloader screen?
is mean my phone stuck at when i start-up my phone...
or stuck at the 4 colour screen with SPL version?
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
All reqd info avail through search
jordanjoker said:
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
Click to expand...
Click to collapse
If that's all you can get from your phone then indeed it's at the bootloader screen. Try reading the Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here thread - took me about 20 s to find using search. ALL the info you need is here if you browse the wiki thoroughly and search. Good luck with your searching and reading up!