Hello,
does someone use a VPN software on the Kaiser ?
Wich one ?
I tried several but none worked.
My Kaiser is using the built in VPN client, to VPN into two different Microsoft RRAS networks using PPTP and IPSec/L2TP.
What problems are you experiencing? What type of networks are you trying to VPN into?
Thanks a lot for your answer !
I didn't know the Kaiser had a VPN client included ...
Where is the application ? What's its name ?
Is there a documentation I can find somewhere to help me to configure it ?
The other thing is that I use a SecurID password to connect to my corporate network, I don't know if this can work also with the Kaiser VPN.
In fact I would like to connect to my corporate network wich accepts both IPSec/UDP and IPSec/TCP. All I know is that I need a Cisco compatible VPN application.
I tried "AnthaVPN", it connects to our Cisco server, but then it disconnects after a few "Time Out" errors.
Thanks again for your help !
I would be interested in this too... we use Cisco at work using Cisco ipsec/udp but no idea how to set this up on the phone
Finally I've found how to use the buit in VPN, but it still does not work for me, because of the SecurID password I think (it says my login/password may be incorrect).
Here is how to access to the built in VPN (my device is french, I translate it to english but I'm not sure the names will be the same on english devices):
parameters/connections -> choose the "Connections" icon.
Then choose "Modify/Configure my VPN servers"
After you filled everything there, choose "Manage existing connections".
At the bottom of the screen, choose "VPN". The VPN connection you made should appear here.
Put your stylus on it until the options "delete" and "connect to" appears.
Select "connect to" and then you should be connected to your network.
I hope this helped.
So finally, I am still searching for a VPN application wich would work with SECURID passwords.
Does someone know one ?
Cisco VPN Help Required
Even my office uses a Cisco PIX Firewall with VPN. Even i have tried many softwares, but nothing seems to work. I thik it is because of the 2 phase authentication of the Cisco VPN.
Also just for info, we use IPSec over UDP (NAT/PAT)
How to set this up in my KAISER?
Hello to all
Im using AnthaVPN and it's work great with Cisco VPN Concentrator System in my KAISER. There must be also a way to connect to a pix.
http://forum.ppcwarez.org/viewtopic.php?f=41&t=32009&hilit=AnthaVPN
Greets
Haija
Like I said, I tried this one, but it did not work with SecurID keys.
I also had a problem with it related to the WIFI :
when I tried to use it with WIFI enabled, if I wanted then to disable the WIFI, it was impossible, even after a soft reset. I had to deinstall AnthaVPN to be able to disable the WIFI.
So finally I think the built-in VPN is better than AnthaVPN because I had no WIFI issue with it.
I have read the manual from the Homepage AnthaVPN and for me its OK. But i haven't testet over wifi. Over GPRS works great.
i'm using the Bluefire VPN CLient (www.bluefiresecurity.com) to connect to my university's vpn (cisco) and it's working great.
with AnthaVPN i was not able to disconnect wifi anymore (phone would hang up -> soft reset -> wifi on again), don't know if they fixed this till now
So I was not alone to have wifi problems with AnthaVPN !
Finally I tried Bluefire VPN, it works a lot better than AnthaVPN (no more wifi problems !), I can go upto the SecurID login, but after that, at "Phase 2", I have an error code talking about IPSec parameters...
So I still have problems but now I know that Bluefire is working with securid keys.
I'm having a bit of an issue with pptp on the Kaiser. The handset is provided by Vodafone so it's branded a v1615, I've not flashed it with anything yet.
I can create and establish a pptp connection via 3g to my server successfully, however as soon as I either go to messaging (setup for imap to the server's internal IP) or PIE to access OWA the pptp connection just drops.
Anyone any ideas?!
Bit of an update - in Messaging the network to use was wap which had an incorrect access point set. I changed it to work, set the access point to internet (I'm on Voda UK), username & password of web.
Then I created the pptp connection under VPN for this (the work) connection.
Now in messaging when I hit send/receive it dials the 3G connection, succeeds, then establishes the pptp connection successfully. And stays connected.
Only, still no mail - it reports back unable to retrieve new messages or contact server.
On the server, it shows there is a ras client and gives it's IP (obtained by dhcp).
I can't ping it (the kaiser) through the vpn.
I can't get imap to work through the vpn from the kaiser to my server.
I can't get RDP to work through the vpn
I can't get PIE to access OWA when addressing the internal IP of the server through the vpn.
I know these services work via this same pptp connection from another windows box. It's almost like it's not routing traffic down the tunnel. Vodafone don't seem to be blocking it as it is establishing a connection. Anyone any ideas??
This is more than frustrating. PPTP connection establishes fine, RRAS reports back an IP address for the logged on client.
I've tried using vxutil on the device (http://www.cam.com/vxutil_pers.html) - when the tunnel is reported as up, it is unable to pass any traffic through the vpn it seems, no tcp, udp or icmp. Nothing.
I have tried adding the server ip address under exceptions, also *.*, but no difference.
I ran Ethereal/Wireshark on the server, not one packet even reaches the server, this pptp connection is useless and somewhat of a let down.
I guess nobody else uses pptp at all? I would have thought I had a fairly standard setup with a W2k3 box nat'd behind a 3com router/firewall.
PPTP works fine on any other device apart from this..
Just so share my experisnce with VPN. I have configured PPTP using the WM6 VPN client and I am able to establish connection on my Kaiser(stock rom).
The connection works fine in PIE when I use it to access one of my servers via HTTP. In fact, I just need to point PIE to the URL of my server(internal IP. I have to set the IP in the hosts file in the registry) and it will automatically dial into my VPN.
For RDP, I am also able to login to my server but strangely the connection will automatically drop after 3 mins or so. I am also unable to get the RDP client to automatically use VPN. I have to manually establish the VPN connection myself.
You may want to try some other VPN clients and not the WM6 VPN client. I have read some threads in the past in this forum regarding other VPN clients that work on WM6.
After trying off and on for the last couple of months it just seems like you cannot get a reliable PPTP VPN connection on a Tilt using EDGE/3G/H. I have tried the biggest tips everyone has--registry hacks, adding intranet address exceptions, and using isp.cingular but nothing works for me.
Because WM connects the VPN when on WiFi when you point PIE to an added intranet address, but doesn't even try when connected over the antenna, I'm thinking this is more of a software issue than an AT&T network issue. So before I go down the painful path of getting my Tilt running WM 6.1, has anyone had any good success with PPTP VPN in WM 6.1 over 6.0?
I am trying to establish a VPN connection to my home servers.
The device is connecting to a Microsoft RRAS server.
I have been successful in establishing a VPN connection both over PPTP and L2TP (using a pre-shared key) to my server.
I know that it is successful, because I use VxTools and check out my IP info. I am also able to ping the RRAS server and other servers on my internal network successfully. I CAN use Windows Mobile desktop over the VPN by both IP and local name (e.g. SERVER01). So I am 100% positive a VPN is established and that traffic flows over it.
The problem lies in when I actually try to do anything else within the VPN.
If I try to map a drive using either Resco or the HTC network plugin, I am unable to browse to any machines. I am also not able to type the names in directly to connect. In addition if I use PIE to access a webpage internally it tells me it can't connect.
I try by FQDN and by IP. I have set up exceptions to my internal FQDN in the network settings...nothing seems to work.
But, there is no point in having the VPN if I can't actually access any resources!
any ideas?
thanks
p.s. This has been tried on both the stock 6.1 AT&T and HTC ROMS following a clean flash.
just curious if you have found a solution. My RDP will not even connect over the VPN, i think this is bescause I have a newer version of RDP. But i can ping across the vpn just fine. from internal Machines and to them. This is annoying.
I have 300+ GB of music I want to listen to over this thing.
As title. I'd like to be able to connect to a basic Windows PPTP VPN.
I believe it's possible on one of the G1 ROMS. Any way of doing it on a Hero?
Failing that, is there any software offering OpenVPN support?
Thanks.