Database Develop

FPSEce configuration/pocket iso

hopefully this tutorial will help fpsece be more fun/playable for everyone.
UPDATE: FPSEce configuration-imo this is one of the best set ups for the wing, but see what you come up with. a little tricky but here goes.
1ST to do this i utilize htc home and battery status plugins. i have been playing this emu overclocked to 299 mhz for periods of up to 2hrs. i do not condone this behavior! and don't even suggest it! but, you get the best gameplay out of the emu.
2ND, make sure all running apps are closed except fpsece,with your device in regular portrait mode with htc home on your today screen, open the keyboard on your wing, go to your programs tab on htc home and press the portrait to landscape flip button. if you you do not have that one activated take a sec and swap it out with one of the other buttons it should be worth it. after this your screen will look funny cause your keyboard is out and your screen has flipped back to portrait orientation.perfect!
3RD, navigate to fpsece and open. go to options/misc/display/landscape left.
4Th, go back into options and choose the joypad/assign buttons. now turn the device so you are looking at the keyboard normally. these are my keymaps but feel free to do your own! PAGE UP-TRIANGLE PAGE DOWN-X ARROW LEFT-SQUQRE ARROW RIGHT-CIRCLE A-LEFT S-UP D-RIGHT Z-DOWN Q-L1 W-L2 O-R1 P-R2 START-SPACEBAR SELECT-TAB MENU- CENTER OF DIRECTIONAL PAD on the screen portion of the wing. finally hit ok!
5TH hit the start tab, then iso and finally navigate to your game WHICH SHOULD BE IN ISOS FOLDER ON YOUR STORAGE CARD. this way you can keep many games on your storage card!
pocket iso guide- http://pdai.org/michu/fpsece/ldrguide.html
this will get your game file sizes way down and your memory card less cramped as well as more games will be compatible with fpsece.

Couple Q's
On CPU Type are you on ARMv4 or ARMv5 ?
Misc-> GFX Driver -> GAPI ?

GiZZy said:
Couple Q's
On CPU Type are you on ARMv4 or ARMv5 ?
Misc-> GFX Driver -> GAPI ?
Click to expand...
Click to collapse
my settings are on usa...recompiler...arm v5...GDI...fast boot...but these may or may not be the best. i am still learning the ideal options myself. i think vga is supposed to be the best/fastest but it depends on the type of device. also i know on some games, gran turismo for example,that adjusting the frame skip number does help speed the game. example: if you are getting5 fps set to 1 on options this will bump it up closer to ten. if you have 12 fps bump up to 2 this may get you closer to 20 fps and so on.

I am trying to install FPSEce on my Herald.
Put your Bios (i.e scph1001.bin) in your FpseCE\BIOS directory
Click to expand...
Click to collapse
What bois ?

Niwla said:
I am trying to install FPSEce on my Herald.
What bois ?
Click to expand...
Click to collapse
you will have to locate yours...maybe it will be on google....ps1 bios??

been waiting for this post for a while
what version are u guys messing with

Hey guys this is my first post on this site i just recently got my first PDA, the wing. I have a slim RUU and i was overclocking to about 280 and when the games are loading they are running from 20-60 ftps but during gameplay it drop down to 8-13max, am i doing something wrong, im using the same set up you guys have been discussing here. and when i set frameskip i cant change numbers, its either a check mark or no check mark. any feedback would be great. thank you

JesusLoves said:
Hey guys this is my first post on this site i just recently got my first PDA, the wing. I have a slim RUU and i was overclocking to about 280 and when the games are loading they are running from 20-60 ftps but during gameplay it drop down to 8-13max, am i doing something wrong, im using the same set up you guys have been discussing here. and when i set frameskip i cant change numbers, its either a check mark or no check mark. any feedback would be great. thank you
Click to expand...
Click to collapse
Setup your controller settings. Bind a key to "menu." Then press that key during gameplay, tap options, then adjust the frames from there.

Ok, i have a HTC Heremes, but i thought i'd just ask here, instead of opening a new thread in Hermes section. I get stuck at FPSece screen, no matter how i set up the options, nothing happens. I loaded ps1 bios. And i'm trying to find a tutorial or guide, but can't find any, all of them are mostly about ripping. Any ideas?

try reading this http://forum.xda-developers.com/showthread.php?t=369855&page=8 . also try the link in my sig!

Yea i got a question or 2.
All the ps1 ios' are like 25mb +
How am i susposed to put them on the phone since the phone dont have that much memory, and i cant reach my memorycard through activsync,
also i have dialup *errgg* and downloading iso' that big is a little impossible for my internet connection, is there a site to find iso's 25mb and smaller?

OK, I downloaded the software to play the games but I don't know where to get the games from. People have said they would be around 25mb, but I can only find ones for 350mb+. Please help. I have a Touch Pro 2

Wow, way to raise a thread from the bottom of the sea there...and about a completely different device too boot. Anyways, the games are not going to be 25MB, if they are then they are either demos or homebrew stuff. Most PSX ISOs are AT LEAST 350MB, but can go as large as a CD, IE 680MB or so. You can try to compress these down using that tool in the first post, albeit you will have to search around for it since the original creators website is not around anymore.

Ok, I've spent forever and a day looking this stuff up....so I have everything I need. Now if someone could walk we through getting my isos's to show up in the isos file that would be great! Does anyone know what I'm talking about?

Did you actually download the ISO's? And if you did, you make an ISO folder on your storage card and then transfer the ISO to it.

forgive me if this post is in the wrong section - i'm new to this forum
i've got a problem with my htc p4350 (herald) when using fpsece
i can start fpsece, but when i try to load a .iso file, the screen turns black for about 10 seconds, and after that it just returns to the home screen
i cannot reach any options screen or etc.
i got the right bios copied and trued 3 different files to load
maybe these are just the wrong files?
(in that case, which files should i try, and where can i get these?)
thanx in advance
bram

SORTED: WormsWP plays on Diamond

I used to play Worms a lot on my old Trinity, there was a problem mapping the keys at first until someone managed to create a save file with the right keys on it to suit the Trinity.
I am a complete noob though, so I don't know how to edit the Savefile to change the keys to suit the diamond. I've tried opening it with notepad (garbled) tried a hex-editor but i don't know what i'm looking for really.
I'm attaching the save file so hopefully some bright-spark on here could edit it to suit the diamond.. As only three buttons are needed, the volume buttons and back button should do just the job.
Hope someone can do it

The central button - fire; Vol- - jump; Vol+ - back

RedUser said:
The central button - fire; Vol- - jump; Vol+ - back
Click to expand...
Click to collapse
Brilliant! thanks a lot for that RedUser - it works like a charm

skilty said:
I used to play Worms a lot on my old Trinity, there was a problem mapping the keys at first until someone managed to create a save file with the right keys on it to suit the Trinity.
I am a complete noob though, so I don't know how to edit the Savefile to change the keys to suit the diamond. I've tried opening it with notepad (garbled) tried a hex-editor but i don't know what i'm looking for really.
I'm attaching the save file so hopefully some bright-spark on here could edit it to suit the diamond.. As only three buttons are needed, the volume buttons and back button should do just the job.
Hope someone can do it
Click to expand...
Click to collapse
your mean is worn world party?

hkpeople said:
your mean is worn world party?
Click to expand...
Click to collapse
no worms world party

why cant i play very well worms on my diamond?
i downloaded the cab and all the hw buttons work very well, my poroblem is that most of the times the touch screen doesnt recognize when i click a button, for example at start it takes me ages so i can play because i click and it doesnt act like it should, in game if i choose another weapon on a worm, when i get to other worm it doesnt let me choose anymore, i believe this is due to the vga screen, care to comment?

Could you upload the WWP cab? I would also love to play it on my Diamond.

BjornH18 said:
Could you upload the WWP cab? I would also love to play it on my Diamond.
Click to expand...
Click to collapse
I would but i... "cough, cough!"... don't know where i got it from!!
google may be able to help though

What do you think for yourself of that?

NICE.. thnx reduser... your wwpsave.dat file is the only one that worked with my htc touch... you saved my life and pimped my PPC... whats the use of a PPC if you cant get WWP on it!

Domitri said:
why cant i play very well worms on my diamond?
i downloaded the cab and all the hw buttons work very well, my poroblem is that most of the times the touch screen doesnt recognize when i click a button, for example at start it takes me ages so i can play because i click and it doesnt act like it should, in game if i choose another weapon on a worm, when i get to other worm it doesnt let me choose anymore, i believe this is due to the vga screen, care to comment?
Click to expand...
Click to collapse
This issue is related to screen rotation. You probably have G-Sen installed. Add worms to the list of programs G-Sen should not rotate, in the G-Sen configuration file (just like it's done for manila).

thanks a million it works perfectly now this game is awesome
thanks for the help it never crossed my mind gsen was messing with it

While I'd be very glad to play Worms, the savegame just makes Worms crash back to the Application selection screen on my Diamond. Any thoughts on what that means, or should I just attach my save-game file?

thanx for the dat files...the game is really good...just wondering guyz...everytime i close the worms app on my diamond...i get an error report...is that normal:/?

Hello, maybe I'm stupid but how can I move and aim with worm? In menu it says with D-pad, but it doesn't work for me. (D-pad is that circle button right?)

Brilliant! Thanks very much for this

Can somebody explane me how to install this on Diamond. And does it work well ?

this is a great fix, THANK YOU!
but can a similer thing be done to remap the buttons in Tomb Raider? the game runs perfect on the Diamond but cant be played as the buttons need to be mapped
can anyone do this?

how do i install it?

can someone remap up and down to end call and start call? i have no up and down on my diamond

SmartGear usage on Diamond? Need assistance...

Hi,
I've loaded SmartGear 1.0.4 onto my Diamond after reading that it's on a few people's "must-have apps" lists. I'm not having the easiest time setting up controls: how do all of you have your Diamond set up for controls for this or any emulators? The "touchscreen" controls don't do anything no matter how I set them in the TS settings, and setting the controls to use the directional keys does not work well at all (the up,down,left,right of the Diamond is NOT conducive to video game play!) Every time I hit the left key it hits the home key.
Is there a way to get the Touchscreen controls to actually work as game controls?
Thanks!
PS: I'm open to suggestions for different emulators too if they work better on Diamond!!

Nevermind, figured it out.

how did you fix this, i had same problem with another emulator?

Please Please Please tell us how you got it to work.
I tried everything and it just doesn't work.
I'm using the (shouldbe) newest v1.0.4 of Smartgear.

I know that no one has been on this thread in forever, but, how did you get it to work period?!?! I have it running roms and everything but it won't recognize ANY buttons, not even hardware... how do you get this to work? Or can you suggest a different emulator? (i've tried pocketsnes and it doesn't work)

Crap, sorry guys, I honestly don't even remember at this point... I took Smartgear off my phone 3 or 4 days later after realizing that the Diamond just isn't the best device for video gaming (other than games that use the G-sensor) due to it's lack of hardware controls. I honestly couldn't tell you what I did since I don't even remember what it looks like anymore!
The only thing I can remember that I had to play with is the video resolution. Make sure yours is set to "Fit2Win*" (the one WITH the *, not the one without!!)

Fpsece

Hey i know people have gotten fpsece (wm playstation emulator if you didnt know) to work on the diamond and other wm.1 phones and i was wondering if anyones actually gotten it to run on the fuze ive been trying for like a week to get it to work and cant seem to find any help anywhere so if anyone could help me out or knows it wont work please tell me.

just copy your roms directly in the fpsece folder, not in the iso folder. where the exe is situated. worked for me but i say that the games are not that playable

ive tried that it still doesnt work

Victory!!!!!!!!! so stupid i should of tried this before i put it on the sd card thinking it would still work so i through fpsece on my phone memory and the games on the sd ant it works. awesome.

TGCLEAR said:
Victory!!!!!!!!! so stupid i should of tried this before i put it on the sd card thinking it would still work so i through fpsece on my phone memory and the games on the sd ant it works. awesome.
Click to expand...
Click to collapse
Not sure why, but I can run off the sd card no problem. Again not very playable with the roms i've tried.

JM33 said:
Not sure why, but I can run off the sd card no problem. Again not very playable with the roms i've tried.
Click to expand...
Click to collapse
same here. Anyone know why the site is down? I was hoping 1.0 would hit today since it will allow faster fps for games. Rumor is 1.0 is finally finished but there will be a pay to use version too..

its been down for 2 days now... i dont know how much longer i can keep hitting the refresh button

bios...
alot of people have problems with fpsce be cause they dont select a bios. if you go to ppcwarez.org-game releases- find fpsce 9.6-a couple of post down a guy posted a zip with like 8 different bios. just extract those into the bios folder. run the emulator goto choose bios. i always select the spch1001. it was recomended to work with almost any game. people haveing problems with fps need to mess with the settings. and frameskipi always set it on 2. hope this helps people. i gotta TP and i run it all off my sd card.

ya ive got it to run halfway decent if its really slow try at least throwing the emulator on your phones memory and theirs not much way getting around using the storage card for the games i got it to run on average around 30fps but im playing ff7 and when the battle starts and ends it drops to like 7 its not that bad when i set the frame skip to at least 3 but everytime i hit a wrong button it screw up so i started using the keyboard in landscape but i dont know how to turn the sound off or change the frame skip if anyone knows how please tell me.

oh and the sites back up

landscape
well you gotta map the buttons, and also i set the menue button to enter on the fuze keyboard. once you get into the menue it brings up the on screen keyboard that fills the screen. from there you can go into options to change frameskip and disable the audio, also exit the emulator or continue back to the game. 1.0 will be out soon and ill buy that ****! theres a bluetooth controller mgp 100or something like that just google bluetooth gamepad and you should find it. its cool cuz it cradles your phone and the buttons are laid out like playstation. all games on the 1.0 have a significant boost in fps. caint wait!!

thanks i figured it out after i posted that but when i open the menu sometimes it rotates the screen when im pressing another button and wont let me rotate it back and ya i wish 1.0 was out but i think theyve been saying it was coming out for a long time so i wouldnt get too excited about it.

You guys are getting 30 fps because of your cpu clock speeds wich is 528mhz default, if no2chem developes a overclocking utility wich i think hes about to do in the coming months, htc raphaels and other msm72xx cpu devices will gain huge fps increase, depending on what OC tables he can come up with, and also if a working gpu plugin that supports openGL ES is ever release that will give a even greater fps incrase overall , so if this two are release the msm7xxx devices will most likely be the best phones for fpsece.
And btw im going to buy a touch pro soon so il be join you guys pretty soon.
Regards
Rafyvitto

i just installed fpse 0.09.5 and when i try to load a rom the program close by itself and of course dont load the game any help?

who has had, the download ... further disassemble themselves
lo ini configured for MiTAC Mio A701 (as an example)
Code:
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=spusoft.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=2
UseOtherMDEC=on
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=100
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=off
EnableHLE=on
EmuConsole=on
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
MemCard1=card1.mcd
MemCard2=card2.mcd
ArmCoreV5=on
ArmCoreMMX=on
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
ShowFPS=on
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_DownRight=1
Onscreen_Down=0
Onscreen_DownLeft=0
Onscreen_UpRight=0
Onscreen_Up=0
Onscreen_UpLeft=0
ForceVGA=off
ForceGDI=off
EnableLFB=off
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=240
Stretch_y=180
Start_y=10
SoundVolume=10
Guncon=0
SPU_IRQ=0
Main_Volume=4
Da_Volume=0
Xa_Volume=0
Isos_PATH=\Storage Card\FpseCE\ISOS
[JOY0KEY]
Up=38
Down=40
Left=37
Right=39
Start=197
Select=198
Triangle=114
Quadrangle=196
Circle=195
Cross=13
L1=0
L2=115
R1=118
R2=117
GunA=193
GunB=196
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[GPUSOFT]
UseDD=0
Fullscreen=0
AlwaysCenter=1
Scanlines=0
hiddenlines=0
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1n1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUWAVE]
DeviceID=0
SampleRate=11025
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=1
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufI

holy sh*t, is this 1.0???

URBANUTS said:
F-P-S-E-C-E alpha1... enjoy!!!
not support samsung processor
download
Click to expand...
Click to collapse
any tips for gettin this to work on Touch Pro, when I open the app it goes right to the "select iso" window, and when I click on an iso it crashes.

URBANUTS said:
F-P-S-E-C-E alpha1... enjoy!!!
not support samsung processor
download
Click to expand...
Click to collapse
That is most likely fake as no Alpha version of FPSEce was released today. Plus, you only have one post which reduces your credibility to nothing.

Agent Blair said:
That is most likely fake as no Alpha version of FPSEce was released today. Plus, you only have one post which reduces your credibility to nothing.
Click to expand...
Click to collapse
this is not feke and stolen FPSECE ... from 13.1.2009

I got it to work, but how do you exit? I assigned a button to menu but I still can't get out of it without soft reseting

Tony Hawk Pro 2 Hardware rendering (NEW HD YouTube Video.Love your Touch Pro Again)!)

THPS2 in Hardware Mode. Touch pro users, Tweak Finalized.
This is my touch pro picture.
New HD YOUTUBE VIDEO NEW LINK ADDED
ok i have great news and bad news. Ill start with the bad news. you will need to download the hardware version. its the same as the soft version just with some tweaks for acceleration . now i must say i have tony hawk running on a touch pro with high graphics and hardware rendering on. no lag whats so ever. i cant beleive it.
If you have the Hardware Version then go ahead with the following.
Need the right version PM me. I do not have or give Warez. Just direct
Note: Remember Hardware and Soft version look exactly the same so theres really no way to tell the diffrence except in the size of the install. Hardware is Bigger.
Note 2. To see the 3rd DLL in the Dlls Folder Follow these directions on you windows PC. Enter the DLL'S folder. Press F10. a Menu bar will appear at the top of file explorer. Click Tools Then Foler option. then click view. under Hidden files and folders select Show hidden files and folders. Now you should see the 3rd hidden DLL.
Remember only this version and my tweaks will have this game Blazing i promise. Better than you ever played it on your phone.
Note: use file expoler and click Menu, then Check SHOW ALL FILES
1.Install to Storage card
2.Now you will have to move these 3 DLL's to your windows Directory and edit your registry as follows
3.HKLM/System/D3Dm/Drivers/Localhook Change to d3dm_ati.dll
4.Now in your THPS2 folder replace TH2_OPT with Mines
5.In Your THPS2 folder delete libgles_cm.dll
If you have libgles_cm.dll on your Storage card main directory delete it
Now open your keybroad and start Tony Hawk, Set you quilty setting to High EnJoy.
Mapping is a breeze. just go to options in THPS2 and set your values
Develpers who made this possible are : NuShrike, At0mAng, sakajati,iRiKi, and of course Me The Family. Cheers
Im upset there are people stealing my work on other sites and not giving credit where credit is due.

will it be playable with hw keyboard in landscape mode ? btw can´t wait :_)

Can't wait to test it.. really like the game.. I hope it is playable on a TP.. Keep up the good work..

Finally its a complished
ok i have great news and bad news. Ill start with the bad news. you will need to download the hardware version. its the same as the soft version just with some tweaks for acceleration . now i must say i have tony hawk running on a touch pro with high graphics and hardware rendering on. no lag whats so ever. i cant beleive it.
Since this site does not allow warez you have to email me a request for location of proper file to get this to work. remember i dont have any warezs i just no where to get it. so you better contact me quick before it dis appears.lol
If you have the Hardware Version then go ahead with the following.
Note: Remember Hardware and Soft version look exactly the same so theres really no way to tell the diffrence except in the size of the install. Hardware is Bigger.
PM me and i will give you my email. i will be on for 2 hours so act fast.
Remember only this version and my tweaks will have this game Blazing i promise. Better than you ever played it on your phone.
1.Install to Storage card
2.Now you will have to move these 3 DLL's to your windows Directory and edit your registry as follows
3.HKLM/System/D3Dm/Drivers/Localhook Change to d3dm_ati.dll
4.Now in your THPS2 folder replace TH2_OPT with Mines
5.In Your THPS2 folder delete libgles_cm.dll
If you have libgles_cm.dll on your Storage card main directory delete it
Now open your keybroad and start Tony Hawk, Set you quilty setting to High EnJoy.
Mapping is a breeze. just go to options in THPS2 and set your values

New video is now posted

New video Link
WIll it make you love your pro again. lol.

Works on my Touch Pro........Thanks

Landscape still upside down
Guys, any ideas on how to flip my landscape? I started the game with the keyboard out and it still flips the screen upside down? Any ideas?

You say that you must use the hardware version but where can I download it from?
Thanks in advance,
M_Taylor40

M_Taylor40 said:
You say that you must use the hardware version but where can I download it from?
Thanks in advance,
M_Taylor40
Click to expand...
Click to collapse
PM me No Warez Allowed

wazzubrad said:
Guys, any ideas on how to flip my landscape? I started the game with the keyboard out and it still flips the screen upside down? Any ideas?
Click to expand...
Click to collapse
DId you follow my steps to the tee? What rom you Have? Might be some tweaks or changes you already made thats not allowing it to work.

I did. And reviewed it three times to make sure.

dearmasfamily said:
If you have the Hardware Version then go ahead with the following.
Note: Remember Hardware and Soft version look exactly the same so theres really no way to tell the diffrence except in the size of the install. Hardware is Bigger.
Click to expand...
Click to collapse
OK nevermind i have the hardware version. i know this cause when i try to start the game it says that my device is not a 3D device install the software version. why would that be though?

dearmasfamily said:
DId you follow my steps to the tee? What rom you Have? Might be some tweaks or changes you already made thats not allowing it to work.
Click to expand...
Click to collapse
When you extracted the files did you make sure you unhide the 3rd DLL?

m1ke420 said:
When you extracted the files did you make sure you unhide the 3rd DLL?
Click to expand...
Click to collapse
Thanks for pointing that out. I've tryed. but nothing seems to work i even commad lined it.
So i added a work around to post one. as Note 2 thanks again.

Not working on my Fuze with RRE Series 6 WM 6.5 v8.6. I did everything but the registry hack since it was already there. Replaced all files blah,blah..
I get told that my device is not a 3D device install the software version. I know I have the hardware version.

Wil Badger said:
Not working on my Fuze with RRE Series 6 WM 6.5 v8.6. I did everything but the registry hack since it was already there. Replaced all files blah,blah..
I get told that my device is not a 3D device install the software version. I know I have the hardware version.
Click to expand...
Click to collapse
Like i said in my frist post theres a hardware version tweaked so ask me and i will lead the way. dont give up its a wounderful game when playable like mines
PM ME with your interest

Awesome stuff. I got it all up and running but the playing screen is like barely half of my screen when actually playing. The menus come up full screen but when actually playing it doesn't Any ideas?
Cheers

Oh bugger seems whatever I did, I stuffed up touch flo 3d eep.
Guess I have some work to do here haha.
Cheers

-wireless- said:
Awesome stuff. I got it all up and running but the playing screen is like barely half of my screen when actually playing. The menus come up full screen but when actually playing it doesn't Any ideas?
Cheers
Click to expand...
Click to collapse
Go to options and make sure the game is set to High Quility Not Low OR MED.