Problems with my TYTN II - Tilt, TyTN II, MDA Vario III General

Hello Guys,
Icant flash my tytn II, when my htc restart appears again in spl 1.0.Olipof screen and cant pass that screen... :_( (Desesperated), i try doferents rooms and nothjing happends, i supouse is a problem with reference in hardspl 1.0 (sorry my english).

bruenorz said:
Hello Guys,
Icant flash my tytn II, when my htc restart appears again in spl 1.0.Olipof screen and cant pass that screen... :_( (Desesperated), i try doferents rooms and nothjing happends, i supouse is a problem with reference in hardspl 1.0 (sorry my english).
Click to expand...
Click to collapse
Have you followed this http://forum.xda-developers.com/showthread.php?t=433835.

your hard spl is of original htc you have to break the spl1.0 to spl 3.29 then try to flash it.

Related

Charmer dead. any solution?

have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.

Trembling display after installing HARD SPL

Hi all!
I have a HTC DIAMOND (no BRAND) with the last official ITALIAN rom. Today I have tried to install the Hard SPL 1.24 (the original one was the 2.03.0000) . The hard spl installed succesfully, but when I rebooted the device i have noticed a kind of tremble on the display. What happened? How can I reinstall the original Hard SPL? Thanks in advance
Hi. I don't know if this might help, but I have the latest official ROM for Europe, which is a bit older than your's, I think, and I had to install HardSPL Olinex. I had screen flicks, but it was from the Flash Player 7. After unninstall, it became regular, altough it still flicks sometimes while booting.
Hope it helps...

Error during ROM Update

Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Charlles said:
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Click to expand...
Click to collapse
Reflash your original carrier rom. from the tri-color screen.
Since WM 6.5 has not and will not be released for the Kaiser, I am assuming that you are trying to flash a custom 6.5 rom, and have followed all the steps described here:
http://forum.xda-developers.com/showthread.php?t=433835
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Charlles said:
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Click to expand...
Click to collapse
Did you follow all the steps in the link I gave you above before you tried to flash the Hyperdragon rom ?
What I mean is to find the original rom that came with your phone, in the Kaiser Wiki and reflash that on to your phone.
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Charlles said:
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Click to expand...
Click to collapse
Where and when did you get your phone and who is the carrier ?
I from Brazil, the carrier is CLARO, i buy of a friend in this month, i have no idea when he buy.
In the box of the phone, is write: "Windows Mobile 6 Professional"
have another way to fix this?
What is the built of your tytn II i.e. its HTC TYTN II or AT&T Tilt ???
if its of HTC then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of HTC available on kaiser wiki page and vice versa for AT&T Tilt.
Hope it'll sort out ur problem.
Cheers
kashifmehmood said:
what is the built of your tytn ii i.e. Its htc tytn ii or at&t tilt ???
If its of htc then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of htc available on kaiser wiki page and vice versa for at&t tilt.
Hope it'll sort out ur problem.
Cheers
Click to expand...
Click to collapse
htc tytn ii
A try a lot, and usualy the errors bellow happen:
ERROR [294] : INVALID VENDER ID
ERROR [262] : UPDATE ERROR
If help, what show in the screen is:
RUUNBH
KAIS120
SPL-1.94.0000
CPLD-8
USB
You need other information?
Thanks
Fellas,
I read in another topics, and i think this error happen because i don't have the HardSPL installed on my HTC TyTN II.
Now the question, how i can install HardSPL with my phone frozen on the tri color screen?
How can i know if HardSPL is install on my phone?
Thanks.

tytn 2 help (i'm new >.<)

hi...
i need some help here...
i'm using kaiser TYTN 2...
WM 6.1
ROM ver. : 3.29.707.0
radio ver : 1.65.16.25
protocol ver : 25.83.40.02H
any ROM i can flash now (i want to upgrade my phone, so slow)
how to flash ROM?
can i upgrade to WM6.5?
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Blinkydamo said:
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Click to expand...
Click to collapse
sorry...what mean by stuck on bootloader screen?
is mean my phone stuck at when i start-up my phone...
or stuck at the 4 colour screen with SPL version?
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
All reqd info avail through search
jordanjoker said:
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
Click to expand...
Click to collapse
If that's all you can get from your phone then indeed it's at the bootloader screen. Try reading the Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here thread - took me about 20 s to find using search. ALL the info you need is here if you browse the wiki thoroughly and search. Good luck with your searching and reading up!

(PLEASE HELP) Do i have to install Hard spl again?

Hi.
Im quiet a noob at this, I have a htc diamond with wm 6.1 and original (i think) htc rom.. I realised i have hardspl 1.40 installed it also shows 'security unlocked' as i pressed the volume down button and the on button, it shows the 4 colour thing.
Id like to put on bsb 6.5 rom, do I have to install hard spl 1.40 again? and I have a v1.00.25.05 radio which is good.. do i have to change that to?
and would I be able to change the radio after i installed the new rom?
and by the way I have an unlocked htc diamond.. I am using a '3' sim...after i install the rom would I not be able to use 3g and '3' anymore?
Thank you

Categories

Resources