Database Develop

Is it bricked? (Upgrade ROM error)

(I'm not 100% sure this is the correct forum, but since it is very ROM related it didn't feel all wrong to put it in here...)
Hi guys. After som serious flashing of cooked ROMs I decided for some unknown reason that I should try to restore a stock ROM. Now, being very tired as I was, i completely forgott that its probably a good idea to flash a new Stock ROM on the unit BEFORE flashing it with a signed SPL....so I just flashed the Signed SPL to the device. That in it self seem to have gone ok, because when I start the unit it say "SPL-1.15.0000". Problem is though that it also says "Upgrade ROM error, please try again"
Now, what should I do? Have tried put both signed and unsigned SPLs on the storage card and started up via the volume down/pwr button thingy, but that does not seem to do anything. I have also tried to attach the unit to a USB port when in tricolor mode ("USB" shows up on the screen) and tried the CustomRUU program. It finds the device and starts to "upgrade" (grey screen on the device with 0%) but then it just doesnt seem to get any further...
As the device was working fine with a custom ROM before I started all this, I suspect that the main problem proably is that I now have a Standard SPL with a cooked ROM, and that they collide sort of. I, as well as the Blackstone, is now stuck and I am all out of ideas what to do? Have also tried Hard and Soft resets, but that doesnt seem to change anything.
Help!

try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps

You can try USPL on your HD and flash a custom or stock ROM with it.

PapaDocta said:
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
Click to expand...
Click to collapse
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).

improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success. Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
Click to expand...
Click to collapse
just do uspl it will work

improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
Click to expand...
Click to collapse
bootloader mode is when you power off the device and hold the volume button down and press power till you get the tricolor screen...
so here is what you need to do .
1. remove the sd card
2. go into the tricolor mode connect your device to the pc and make sure it says (USB) at the bottom
3. run the stock shipped exe from you pc
if that didn't work then you should try the USPL version.. and there is a guide if you are using vista.. i just tried and worked fine.. here it is
http://forum.xda-developers.com/showpost.php?p=3331078&postcount=153
and the reason i'm asking you to remove the sd card because if you have a rom (blacimg.nbh) it won't let you do anything it will try to flash from the sd card and right now you don't want to do that.
and you shouldn't put any rom into the internal storage of the phone..

PapaDocta said:
and you shouldn't put any rom into the internal storage of the phone..
Click to expand...
Click to collapse
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?

nicelad_uk said:
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
Click to expand...
Click to collapse
i don't think anything would happen... the file will get deleted when you flash as the rest of the files in the internal memory

Thank you everyone! The USPL thing solved it, when I did it from a XP machine! The once bricked Blackstone is not alive an kicking again!
About USPL, I saw the workaround for Vista, but downgrading a few components to make it work just doesn't seem like a safe way to do it. And I cant help but to think that it might have unwanted side affects, ie affecting system stability. But maybe I am wrong?

Going back to shipped ROM without bricking?
Hi,
After reading this thread I am now a bit worried and, as a newbie, would appreciate maybe a "simple" answer to my question.
I''ve been experimenting with various cooked ROMs after following the guide in the WIKI for installing HardSPL and then putting the ROM file (BLACKIMG.nbh) on my SD card and installing it using the power on + volume down button method.
However, I now want to revert back to the original "shipped" ROM, which I have downloaded from the list of shipped ROMs via the WIKI (I downloaded the one which closely matched what was originally on my HD - as I didn't know how to backup the actual ROM on my HD at the time).
So, my question:
How should I put the downloaded original/shipped ROM:
RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
into my HD without bricking it?! Do I just run it on my PC with ActiveSync enabled or do I need to do something to remove the HardSPL or something first?
Sorry if this has been answered previously but I get confused when a thread just makes loads of references to SPLthis and SPLthat etc.!

if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..

PapaDocta said:
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
Click to expand...
Click to collapse
Brilliant! Thanks for the simple answer Worked no problem!

custom rom help!

hey...
i cant install any custom rom on my xperia.
i installed HARD SPL.
and during the bootloader...
it says what it suppose to say like in the guide[of biovolt]
i meant during the bootloader...when the tri color screen appears.
it says
KOVS110
SPL-0.72. 01iNex
MicroP1-787
MicroP2-707
i formatted my memory card. [fat 32]
then i put the rom, on the root of the memory.
naming it Kovsimg.nbh
[and yes there is nothing but Kovsimg.nbh]
even then...
it says no image found during the bootloader.
anyone! help me!
please....

Did you try to use other Roms?
everything looks ok there should not be a problem. maybe your Kovsimg.nbh is corrupt.
there als can be a transfer fail, i had this problem i copy it to my sd card but couldn't flash it. when you copiyed the nbh to sd card don't pull it out wait a moment then try to take out the cable/sd card. this is what i did and worked for me.

commodoor said:
Did you try to use other Roms?
everything looks ok there should not be a problem. maybe your Kovsimg.nbh is corrupt.
there als can be a transfer fail, i had this problem i copy it to my sd card but couldn't flash it. when you copiyed the nbh to sd card don't pull it out wait a moment then try to take out the cable/sd card. this is what i did and worked for me.
Click to expand...
Click to collapse
yes , i did.
about 5 roms.
and it's not corrupted...
cause i always check...
even inside my phone via file manager also.
maybe it's my micro sd.
that's the problem.

igoodbyes said:
yes , i did.
about 5 roms.
and it's not corrupted...
cause i always check...
even inside my phone via file manager also.
maybe it's my micro sd.
that's the problem.
Click to expand...
Click to collapse
Then you know what to do. Try other sd cards.
you can find the problem by trial&error method. what it means is you just have to try different things to find whats wrong it is one off the most used methods.

commodoor said:
Then you know what to do. Try other sd cards.
you can find the problem by trial&error method. what it means is you just have to try different things to find whats wrong it is one off the most used methods.
Click to expand...
Click to collapse
haha
i agree
thank you
btw i got my rom changed via pc method...
which i dont mind using...haha
sorry for the trouble!

Charge/sync problem

I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.

thedon809 said:
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
Click to expand...
Click to collapse
Well, if you are in bootloader and you got the USB sign on it you are ok. Try to flash another rom or reflash your stock rom.

Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.

thedon809 said:
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
Click to expand...
Click to collapse
Just look here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Hope that helps

I flashed that rom and it still does the same thing.

thedon809 said:
I flashed that rom and it still does the same thing.
Click to expand...
Click to collapse
Let's try this one my friend http://forum.xda-developers.com/showthread.php?t=335568 probably you can revert back to the original spl and stock rom

What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.

thedon809 said:
I think what I did was
Click to expand...
Click to collapse
That bit made me shiver.

stuntdouble said:
That bit made me shiver.
Click to expand...
Click to collapse
lol, I know that's exactly what I did. I was just saying, that I think that has something to do with it not charging and syncing. I'm not sure though, because I'm not a pro at flashing and all that. I can rebuild an engine, but I can't flash a stupid rom on a phone . Whatever I have to do to fix it, will have to work the next time because I only have about 60% battery left.

thedon809 said:
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
Click to expand...
Click to collapse
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.

thedon809 said:
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
Click to expand...
Click to collapse
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked

gmaniac2008 said:
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
Click to expand...
Click to collapse
My hp laptop conveniently has an sd card reader.

Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?

thedon809 said:
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
Click to expand...
Click to collapse
Follow the instructions of how to flash via sd card from here: http://forum.xda-developers.com/showpost.php?p=2741200&postcount=1

Do I have to change the name of the att hardspl to KAISIMG.NBH?

thedon809 said:
Do I have to change the name of the att hardspl to KAISIMG.NBH?
Click to expand...
Click to collapse
No.
(message too short so adding more letters to post comment.......)

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

Problem in Bootloader in HTC HD7

Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:

Omar Sammak said:
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Click to expand...
Click to collapse
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794

xdrc45 said:
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
Click to expand...
Click to collapse
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:

Omar Sammak said:
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Click to expand...
Click to collapse
Your welcome... You'll have your HD7 up and running a custom rom in no time!

xdrc45 said:
Your welcome... You'll have your HD7 up and running a custom rom in no time!
Click to expand...
Click to collapse
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???

Omar Sammak said:
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Click to expand...
Click to collapse
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.

xdrc45 said:
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
Click to expand...
Click to collapse
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen

Omar Sammak said:
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:

Omar Sammak said:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Click to expand...
Click to collapse
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.

xdrc45 said:
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
Click to expand...
Click to collapse
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!

Omar Sammak said:
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Click to expand...
Click to collapse
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.

xdrc45 said:
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
Click to expand...
Click to collapse
i installed the two ... but i notested that Deepsharing 7 is not established dont know why .. digital power is not working well even when i restart my phone ant rooted the phone and usb video didnt work
so i returned to Nextgen v3 its lighter and stable