Database Develop

Unbrick Trinity From SD

Need a favours over here. Recently, i bricked my trinity. P3600 more precisely Dopod D810 (i flashed wrong ROM -> Unpacking cooked rom for trinity but i merge it with -Hermes cmd in NBMerge! houh... so stupid! ). Soo... just not what i expected, Rom flashing stop on half, SR my trin and tada.... 3Color screen bootloader popup! haaarggg, i try flashing another rom using any rom that has same CID *official or cooked rom* (some are 100% thru, but someother not) but like usual it won't start the windows (just blank/black screen with green led[ always on!) Never been like this before! Have been flashing several times using any cooked rom by great chef on trinity but this time! :doh: damn it! my bad.
i found solution on the forum *Unbricking Trinity Stuck on Bootloader* but since my usb port can't be detected on my vista/xp machine, whether i disable AS and changed my usb cable it doesnt work at all, on mtty too! so i can't use that utility. i try run install sspl olipro 1.3 but it never changed my spl at all. now i can't use my trin at all cuz allready dead.
btw this is the info on trin 3color screen bootloader:
IPL 1.00
SPL 3.20 OLIPRO
anysolution for bringing back my trinity from the death? maybe a tools/utility to unbrick trinity from SD or something like that, which not involved any pc connection, without bring this devices to htc center of course.
I hope any expertise on this forum would helped me sort out this probs.
Sorry for my english and thanks for reading my post.

Read this :http://forum.xda-developers.com/showthread.php?t=308691 download splxploit-windows.zip (935.1 KB, 7619 views) put phone in bootloader run splxploit when bootloader change
After this download full rom here is link:http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
Then flash full rom bat do not disconnect usb cable in any step.
Before use any step disable active sync.

Usb are dead
Gsmhacks thanks for ure reply. I have tried that one, and lot read ing on wiki. But since i cant use the usb i cant use that splexploit whether on live linuxcd, or .Net version even win version. The usb port cant be opened . I think i broke the usb pin. From the beginning everytime i flashed my trin i never used ruu utility, i always do the sd card method and that is the best and easiest method and it works for me.
I just curious perhaps can anyone or is there any utility to unbrick trin via sd card. I knew a lot a people has bring their trinity life from dead by using htc stackflow splexploit. I hope that was work for me too! Too bad my usb are dead. Damn!

Here what you need bat only work if you have hard spl
If you install hard spl before brick trinity you can use SD CARD to flash trinity. YOu need to formate sd card to FAT32 with Card Reader donwload full rom here is link: http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
then extract and file RUU_Signed.nbh rename to TRINIMG.nbh and copy it to the root folder of your miniSD card.
Here is full instruction again also first format sd card to FAT32 !!!! VERY IMORTANT to format sd card to FAT32 or all other step will not work THEN:
1. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract (or you can also use winrar via wine).
2. Rename the .NBH file to TRINIMG.nbh and copy it to the root folder of your miniSD card.
3. With miniSD card inserted on the phone, start the bootloader (hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom).
4. You should see the screen pictured on the left, confirm flashing on screen by pressing the power button.
5. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
6. When flashing completes soft-reset your device.
and you will flash and unbrick trinity bat this only work if you install before this hard spl i mean cid unlock trinity. if not you must fix usb port.

That will work? I hope so
Ok then i'll try flashing using that rom. Oo, i have install hardspl btw and so far flashing using sdcard method no probs. But after i bricked my trin flashing doesnt smooth like be4. Always gave me error 0018003 update fail on the halfway, i guess because i have bad nand on trin and probably cuz cooked rom.
Can u give me another link, perhaps on xda ftp. rapids so slow 4 me. Btw i have download dopodasiawwe official rom on xda ftp *twice but still when i tried to run the package it gave me corrupt archive integrity fail w!f.
Thanks gsmhackerns, i downloading the package now!

Perhaps you can find a way to make a goldcard for Trinity?
See http://forum.xda-developers.com/showthread.php?t=437996

That's what i looking for! Thanks.
Humm, superb. Yay, great! Thank you stepw. Even its for elf with a little mod i hope this will work. Once again thank you.
Stepw, i have tried making the gold card, everything went ok. I have temp. cid *supercid* but the probs now is i can't download http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.execan someone uploaded to somewhere else. Rapidshare crap! perhaps on xda ftp.
thanks!

goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also

cmonex said:
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
Click to expand...
Click to collapse
Indeed. Youre right cmonex, it doesnt make any difference at all 4 my trin. After several tried using and making goldcard 4 trin, finally i made working goldcard4trin, but gosh it still stuck when i tried to update the os (update os fail) humm anyone.

Sorry for wasting your time with Goldcard, I have overlooked that you have a hard spl on your Trinity. In this case goldcard doesn't make a lot of difference.
And there's no trindiag.nb to the best of my knowledge that could be used instead of SSPL cmonex is suggesting to run from SD.
Back to the topic, sounds like you have some "bad" blocks in flash and OS can't be flashed. Bad blocks can be reset with "task 2a" command, see this thread for more details:
http://forum.xda-developers.com/showthread.php?t=330496
The question is how to run it without USB and I don't have an answer for you
Some people have previously mentioned they managed to flash smaller OS images when larger images failed, perhaps if you try flashing some minimal vanilla ROM, it will succeed?

Bad NAND, Yup!
Ya... as i mention before yup i do have bad nand block on my devices. Using manila rom with smaller img size the flash went 'OK'. But it doesn't boot at all infact just black screen with green led on.
Okay the only solution probably use mtty and do task 2a if i'm not mistaken. But like you said "The problem is the USB port". I think the port is ok cuz i already tested it connecting my usb to my trin without inserting the battery and the red led *magenta* is on. humm, weird!
But if something can make it working without involving any pc connection it would be a great achievement. hahah! well i supposed i have to put my trin on bunker before someone can make it happens
I asked SEA in my country and they recommend me to changed the machine it self and they charge me around US $160 ho...ho.. too "wideeeeee" for college boy like me

Same problem, i flashed the rom
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
and after that i tried to flash a new radio!
power+cam and the cell phone did not show usb, then i used sspl to rum the radio but it locked at 0%
after that it is stucked at bootloader screen
ipl 1.0
spl 3.20 .....
but no usb and no sd card !!
did i lost the cell phone?
there is no jtag ou something like that ?

so now... you still want this SSPL? i'm thinking of patching one up to automatically run task 2a maybe. or just restore stock spl for warranty service if that's what you have in mind. but you didn't really reply to that offer?

Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english

Needed!
Cmonex, sorry for longtime haven't seeing this thread again. okay i really need your help btw if you willing to help me. The spl your talking about perhaps can sort out the probs (i hope) at least we tried. as for task2a cmd to clear the bad nand block is none usefull for me since usb conn. are definitely drop dead.
how about patch the SSPL to do task2a cmd to solve the bad NAND block first.

dinizbruno said:
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Click to expand...
Click to collapse
no usb, no sd, no chance sorry. jtag it or get it serviced or get another phone.
as for jtag, hermes jtag has been worked out by scholbert. trinity is probably the same, but you will have to find the pins. the rest of the process will be the same.

Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,

The O.S is more important to these operations than can be stressed - for a 99% safe flash Win XP is your best bet , I have had nothing but error 260,270 halfway flashed roms and usb faults running on vista and since I had my original bricking episode - NOTHING , I repeat NOTHING including genuine roms has flashed without a recovery or at least without doing something strange in the process - SPLXPLOIT has been a saviour here , without it I would've been lost.
Cant the O.P simply use another machine to test out the USB theory ?

ALIVE AGAINnnnnnnnnnnnn!!!!!!!!
My p3600 was stucked att bootloader, and wont give "usb" and do not read TINIMG.NBH (tried on elf with ELFIMG.nbh and the card was great)!
I did a golcard with the post on elf about it and the cell with the gold card inside was the same, no trinimg.nbh and no usb.............
BUT..............
with the goldcard inside, turned OFF, i placed it on the usb cable off the pc and the device booted to the bootloader screen, but this time he got "USB" , before flashing anything i removed the card , and putted switched off in the usb, booted with "serial" with card and pressing power and then placing usb still "serial" message!
I putted the card, did not switched on , placed on the usb and waited for it to boot for it self , and for my surprise "usb".
Flashed stock rom, and it booted nice!!!
Please try!
saved my day!

sidekraouf95 said:
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
Click to expand...
Click to collapse
I have to know how to repair my phone please... nobody can explain precisely how to put my phone on bootloader using my sd card directly from my computer under vista...???

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

How to flash HTC HD Rom ?

Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy

stussy said:
Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
Click to expand...
Click to collapse
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.

philrom said:
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
Click to expand...
Click to collapse
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.

stussy said:
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
Click to expand...
Click to collapse
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.

philrom said:
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
Click to expand...
Click to collapse
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...

stussy said:
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
Click to expand...
Click to collapse
??
What's the situation now? What SPL version do you have now?

philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i check now

philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
Now my SPL is SPL-1.56 olinex
But the screen colour become 3 colour only ... just look alike our computer safe mode

philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?

Just do the guide from Digital Outcast Step-by-Step and you can't go wrong.
If you got a problem with a certain step, then explain it detailed.
We can't help if we don't know the exact problem.

stussy said:
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Click to expand...
Click to collapse
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.

philrom said:
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
Click to expand...
Click to collapse
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot

stussy said:
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
Click to expand...
Click to collapse
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.

philrom said:
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
Click to expand...
Click to collapse
I will try tonite bro, anything will let you know
Thanks a lot

[Q] Nextgen+3.0 with HD7

Cannot Flash 3.0... I am running 2.4 just fine right now.
I go to bootloader with computer attached and it hangs at 0% after I hit upgrade.
What have I done wrong?

did you installed HSPL or RSPL? if rspl you'll need to install it again, but you should install hspl after in order to avoid any future problem with flashing custom roms...
H/RSPL v3 is here

Yep Thank you so much!
NebZoNe said:
did you installed HSPL or RSPL? if rspl you'll need to install it again, but you should install hspl after in order to avoid any future problem with flashing custom roms...
H/RSPL v3 is here
Click to expand...
Click to collapse
Ok! That was it! I had forgotten that I didn't HSPL in case of a hiccup. Thanks again!

can push thanks button if i helped...thanks!

Check ur spl, and three color screens' USB connect well.
I suggest u use a laptop flash ur phone

pls help

my htc hd7s bootloader screen shows just one line
PD29150 SS-BC(4k)
i got this when something went wrong while RSPL HSPL...
i am not able to install any rom on this..
pls help..
iam attaching snap of screen ..

That's what happens when the phone gets bricked, the bootloader gets damaged and you only get one line, the devices MID information. Did you downgrade your spl first to 3.xxx or below before trying to install rspl/hspl? Can you get into USB host mode? Press camera+volume down+power on, this will bring you into USB host mode. If you can get into USB host mode there is a chance you can repair the bootloader with the Goldcard method. Post back your results and we'll see what we can do to get it fixed for you!

thanks xdrc45
i will try this and get back to u.
aakash

xdrc5
i have tried custom roms many times. but this was sone when i install a stock rom on it and then again used espl hspl. after that i got that screen..
pls tell me how to use gold card method to repair bootloader..
i want ot install custom roms on my device.
thanks

aakashvijay said:
xdrc5
i have tried custom roms many times. but this was sone when i install a stock rom on it and then again used espl hspl. after that i got that screen..
pls tell me how to use gold card method to repair bootloader..
i want ot install custom roms on my device.
thanks
Click to expand...
Click to collapse
Its not really hard you just have to make a Y cable (otg) out of some USB cables and have a SD card reader/flash drive. Here's a detailed tutorial on how to make the Y cable, how to use it and the SD card reader!
http://forum.xda-developers.com/showthread.php?t=893152

xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks

aakashvijay said:
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
Click to expand...
Click to collapse
Hello!
try this:http://forum.xda-developers.com/showthread.php?t=1676794

aakashvijay said:
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
Click to expand...
Click to collapse
Yeah there you go...try Ruyzalim's goldcard tutorial, great pics, deatailed and easy to follow!! Also when your making the Y cable, don't make it too long in lenth or sometimes it won't work properly!

xdrc45 said:
Yeah there you go...try Ruyzalim's goldcard tutorial, great pics, deatailed and easy to follow!! Also when your making the Y cable, don't make it too long in lenth or sometimes it won't work properly!
Click to expand...
Click to collapse
what if i make an goldcard and replace microsd card in HD7 and then go to usb host mode...
pls suggest because nothing is going works for me..

RIFF box
aakashvijay said:
what if i make an goldcard and replace microsd card in HD7 and then go to usb host mode...
pls suggest because nothing is going works for me..
Click to expand...
Click to collapse
Your only solution to fix the bootloader(SPL), but you must pay to someone who repair phones...
I don't know how much will it cost you...