Database Develop

Can't upgrade to cooked ROM

hello guys...i've been trying to upgrade to this Romeo's rom....but seems there's a problem with it...after i copy n run the jump spl, the screen become tri color...n i waited for the "usb" words to appear in the middle of the screen,but it didn't appear....and because of this i've been stuck at these steps for few days...i hav searched at the wiki's, but couldnt find about this probl..help pls guys...thanks in advvnce,,

okay..think i find the way now..searchd again at the wiki...n the suggestion was to reflash the original rom...think this is my original rom "1.81.707.0 (radio 1.27.12.11) Dopod WWE "...the question is...the rom version and the radio version is different here....the rom vers is exactly the same wit my rom...but the radio is different....should i just proceed or not?

What version of JumpSPL are you using? Mine, and a couple of other's as well, didn't show the "USB" with version 1.93. Try version 1.56 and it should work.

Please tell me that you are not trying to flash a ROM using JumpSPL...

i've been told to use this "JumpSPL1.93-KAIS" in order to use the "@ROMEOS_v3_5"...i just follow the steps given to me...

Connect Kaiser to computer using USB cable
Make sure ActiveSync icon is GREEN
RUN kaiser-HardSPL.exe on Computer (PC)
Follow instructions on screen:
Click to expand...
Click to collapse
Wonder if someone told him to cid-unlock first..
The wiki/sticky would have.

ChumleyEX said:
Wonder if someone told him to cid-unlock first..
The wiki/sticky would have.
Click to expand...
Click to collapse
That's why I went with an open-ended statement/question. His original post states he checked the Wiki, but I saw no mention of HardSPL.

NotATreoFan said:
That's why I went with an open-ended statement/question. His original post states he checked the Wiki, but I saw no mention of HardSPL.
Click to expand...
Click to collapse
i checked wiki because the instruction given to me went wrong...i downloaded this romeo v3.5 and comes together with jumpspl and hardspl as well...the instruction ask me run the jumpspl before running evrything else....so here,u guys saying that i should straight away run the hard spl is it?

giggsy_lel said:
i checked wiki because the instruction given to me went wrong...i downloaded this romeo v3.5 and comes together with jumpspl and hardspl as well...the instruction ask me run the jumpspl before running evrything else....so here,u guys saying that i should straight away run the hard spl is it?
Click to expand...
Click to collapse
JumpSPL
HardSPL
ROMeOS
in that order...

Ok, so I know I have posted this before....and have seen it posted in about 100 other places ( not to mention the ROM UPGRADING thread right on the front page of the WIKI ). JUMPSPL is ONLY used to flash your current locked spl into a HARDSPL.
Step 1
Run JumpSPL on the phone
Step 2
Flash HARDSPL onto the phone
Step 3
Using HARDSPL, Flash your ROM and/or RADIO
NEVER NEVER NEVER DEVIATE FROM THIS!!!!!

pyraxiate said:
Ok, so I know I have posted this before....and have seen it posted in about 100 other places ( not to mention the ROM UPGRADING thread right on the front page of the WIKI ). JUMPSPL is ONLY used to flash your current locked spl into a HARDSPL.
Step 1
Run JumpSPL on the phone
Step 2
Flash HARDSPL onto the phone
Step 3
Using HARDSPL, Flash your ROM and/or RADIO
NEVER NEVER NEVER DEVIATE FROM THIS!!!!!
Click to expand...
Click to collapse
yeapp...this the order i followed..after i run the jumspl,the tricolor thing appeard...and the sync stopped..and it didn't reconnect,i tried to run the hardspl n follow the steps..but it appears no connection with device...when i checked the wiki about stuck at tricolor...they ask to flash back the shipped rom again..found that rom but in different radio vers with mine....is it ok to just run the original rom again?

giggsy_lel said:
yeapp...this the order i followed..after i run the jumspl,the tricolor thing appeard...and the sync stopped..and it didn't reconnect,i tried to run the hardspl n follow the steps..but it appears no connection with device...when i checked the wiki about stuck at tricolor...they ask to flash back the shipped rom again..found that rom but in different radio vers with mine....is it ok to just run the original rom again?
Click to expand...
Click to collapse
In answer to your Question, Yes.
Read the instructions of Post #2 very carefully of this thread to install Hard SPL: http://forum.xda-developers.com/showthread.php?t=396922.
Then flash the ROM.
Ta
Dave

DaveShaw said:
In answer to your Question, Yes.
Read the instructions of Post #2 very carefully of this thread to install Hard SPL: http://forum.xda-developers.com/showthread.php?t=396922.
Then flash the ROM.
Ta
Dave
Click to expand...
Click to collapse
okayyy bosss....i think this might help...gonna try now..

finallyy...i got it man...thankss alot devshaw...i found that u must take out the sdcard n simcard in order to proceed the steps...now i'm gonna test some roms here...hey devshaw which rom u think best?for me i prefer roms having nice interfaces....seems dutty n L26 are more in interfaces...their design is gorgeus....since this is the first time flashing the rom i don't know which to choose...i've been told to use romeos by hang.tuah,since he's same country from me...i just give it a shot...any recommends??

giggsy_lel said:
finallyy...i got it man...thankss alot devshaw...i found that u must take out the sdcard n simcard in order to proceed the steps...now i'm gonna test some roms here...hey devshaw which rom u think best?for me i prefer roms having nice interfaces....seems dutty n L26 are more in interfaces...their design is gorgeus....since this is the first time flashing the rom i don't know which to choose...i've been told to use romeos by hang.tuah,since he's same country from me...i just give it a shot...any recommends??
Click to expand...
Click to collapse
For a nice UI try the [27-08-08] L26 KaiserDiamond Throttle Launcher (Beta 6 released!). ROMeOS is fast and stable though, best way to find out is to try them.
Ta
Dave

plzzzzzzz help meeeeeeeee

my helard p 4350
ipl 1.08.0001
spl 1.08.0001
i try to flash custom room so that happened
and when i try to flash any room its display invaild update tool
stuck on boot loader what can i do
plz advise me
thanx for ur cooperation

try this thread. read the WHOLE thread and carefully:
http://forum.xda-developers.com/showthread.php?t=417930

mr_guitar_eg said:
my helard p 4350
ipl 1.08.0001
spl 1.08.0001
i try to flash custom room so that happened
and when i try to flash any room its display invaild update tool
stuck on boot loader what can i do
plz advise me
thanx for ur cooperation
Click to expand...
Click to collapse
you could also try this:
Originally Posted by ivanmmj
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...

In his case, the goldcard is the answer. He did not heed the warnings about flashing a phone with an SPL/IPL lower than 4.

ivanmmj said:
In his case, the goldcard is the answer. He did not heed the warnings about flashing a phone with an SPL/IPL lower than 4.
Click to expand...
Click to collapse
thats what i thought.

what the gold card
actually i falsh a new room through hard spl then i try to falsh another one through ruu,
but now when i go through bootloader and the three coloure displayed i cant flash any rom cuz its stopped at 0% and the msg invalid,,,,,,,,,,,,,
so ?

What did you flash the second time? It broke your SPL and IPL.
Search for the word Goldcard.

spacemonkey333 said:
try this thread. read the WHOLE thread and carefully:
http://forum.xda-developers.com/showthread.php?t=417930
Click to expand...
Click to collapse
i gave him the goldcard link already

thanx for the link mr but it must need a memory card
is that right
and the steps is not clearly
plz any one help me
[email protected] plz contact me via mssenger
Br

is there any way to get back my device gold card doesnt work

That's the only known method. If it's not working properly, make sure you're following the steps properly. If it still doesn't work, then it's repair time... Sorry.

Done ,, gold card is great
thanx my friends

Cannot seem to flash blackstone??

Hey all,
I currently have the original ROM Version: 1.19.61.1 WWE and i am trying to update the SPL to a HSPL so that i can use cooked ROMs, can someone tell me why this isnt working? I used the HSPL from the sticky thread on this forum yet it hasn't changed anything......do I have to hard reset my blackstone after doing this? I am getting the error [240]:FILE OPEN telling me to update utility.
Thanks

What type of operation system do you have? Is it vista?

http://wiki.xda-developers.com/index.php?pagename=RUU_Errors - doesnt really apply to HSPL package though for your error code?

I have XP does that make a difference?

sergioiacobucci said:
I have XP does that make a difference?
Click to expand...
Click to collapse
Should make it easier as you don't need to update vista drivers as you're using XP.
Have you followed cRaCKwHoRe's guide to get HSPL or USPL onto your device. Follow link to his guide in my signature.
ERROR [240] - When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again. Check that the contents of the folder is a CustomRUU.exe file and an .nbh file. If you put the os-new.nb file in by mistake instead of the .nbh, this is the error that shows up.

just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks

sergioiacobucci said:
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
Click to expand...
Click to collapse
well browse the threads of some roms n u can know the best rom for u..
ya once u fash a 6.5 rom all screen problems will be sorted out.
for radio version, they usually are not included on cooked roms

Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help

sergioiacobucci said:
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
Click to expand...
Click to collapse
well ya it has the radio n well no probs cos its the 1.14 radio..
all's good..

thanks for all your help much appreciated

Remove Hard-SPL

Hi, can you help me with how to remove the Hard-SPL to upgrade to the original ROM for HTC Touch Pro 2. I'm from Bulgaria, the phone is not locked to an operator (AT & T Orange), etc. What files will I need and how. I also want to download the original Rom from the site of HTC. Thanks in advance!

http://forum.xda-developers.com/showthread.php?t=550131
All info you need is here.
One note from my experience: first downgrade to original rom then install original spl. I had an issue, it was bricked, but all it needed was to one more time upgrade original rom.

You mean that you must first install the original Rom (I could not download it from HTC's site can help you). And then correct me if I'm wrong:
First you say to install the original ROM.
2nd to download RhodiumSPLRelocker_079SPL.zip unzip it and run. Exe
3rd Stock_SPL_Restore_084.zip to download and in the same way as putting a new ROM to choose it (unzip it first)
Do I need to do Hard Reset at any time? And maybe a little help otkade to download original ROM.

I did this from the link you gave me in boot loadera get out this Oninex, then I load again ROM-a which had previously tried to put my original and gave me an error

The instructions say to flash the stock ROM before you re-lock SPL.

I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!

ivailo0 said:
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
Click to expand...
Click to collapse
i don't think you can re-lock your phone with custom rom on your phone but what you do is hard_spl it (if spl re-locked) then
task 29 ----> install stock rom ----> re-lock spl
good to go

Isteglih his RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the right Stock Rom correct me if I'm wrong. Inastaliram it and to 0% gave me an error. - 294 Invalid Vender ID.
But it's not e what I need.
I'm not too far into things ...

Please help, now I can not get no ROM, and this olinex do not write anymore. and gives me an error any attempt to put the new ROM. Now when I work under the Energy ROM ...

Hi
Before flashing another rom, please use the tool called task29. get it here http://forum.xda-developers.com/showthread.php?t=649191
Check here for another rom for your device http://rapidshare.com/#!download|33...dio_Rhodium_4.49.25.17_Signed_Ship.exe|180171
or here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
use the SPL relocker tool LAST
Good luck!

Hello, thank you for the help you gave me, but I think we still have a problem (task29). Do the following:
1 - http://forum.xda-developers.com/showthread.php?t=649191 here I lost my task29.zip.
2 - unzip it, inside there was task29, had ROMUpdateUtility.exe. ROMUpdateUtility.exe and opened as follows next .. next .. me and sticks to 0%.
In the above post I mentioned that yesterday I did relock SPL before I know that I need to do this first (I do not write now in olinex boot loadera). I think from there

:-( you're in bad way. look for some help here http://forum.xda-developers.com/showthread.php?t=550540

The solutions mentioned above will NOT work, because you don't have hardspl installed.
Flash Hardspl again and then restore to stock rom and spl.

Guessed for it, but waited for someone to tell me. I will use this thread http://forum.xda-developers.com/showthread.php?t=550131 and you will get new and will write what happened. Thanks!

I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!

ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
This is what i told you to do in Post #7 ..... i guess you didn't read it at that time but anyways glad to know your problem is solved

You are right. Thanks again

ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
Bravo! so you how many of your fingers still have finger nails? lol
Baptism by fire, eh? Nice time.

ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.

jfandl said:
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
Click to expand...
Click to collapse
he already had the same phone Hard-SPLed. the license works for the same phone forever. a different phone is different.

Problem in Bootloader in HTC HD7

Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:

Omar Sammak said:
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Click to expand...
Click to collapse
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794

xdrc45 said:
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
Click to expand...
Click to collapse
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:

Omar Sammak said:
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Click to expand...
Click to collapse
Your welcome... You'll have your HD7 up and running a custom rom in no time!

xdrc45 said:
Your welcome... You'll have your HD7 up and running a custom rom in no time!
Click to expand...
Click to collapse
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???

Omar Sammak said:
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Click to expand...
Click to collapse
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.

xdrc45 said:
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
Click to expand...
Click to collapse
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen

Omar Sammak said:
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:

Omar Sammak said:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Click to expand...
Click to collapse
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.

xdrc45 said:
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
Click to expand...
Click to collapse
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!

Omar Sammak said:
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Click to expand...
Click to collapse
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.

xdrc45 said:
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
Click to expand...
Click to collapse
i installed the two ... but i notested that Deepsharing 7 is not established dont know why .. digital power is not working well even when i restart my phone ant rooted the phone and usb video didnt work
so i returned to Nextgen v3 its lighter and stable