Greetings Experts,
I am using X1 & after update Rom my X1's keypad is not working . after opening keyboard, screen not rotating landscape, but after closing keypad, screen shows exactly what I typed on keyboard. Sorry for my english. I flashed 4-5 different rom files today but problem is still there. Is there cab file needed to enable this ?
I am following SD card method & stuck in this problem even I dont know exact version Rom for it.
I think I tried these Roms if any one can understand my problem Please help me.
RUU_Signed_NL_Vodafone
Xperia X1.5 Kovsky
X1i_GENERIC_UK_KOV_R2AA010
Christian_WWE_3300_Full
Now Using : XPERIA_Gen_II_full_WWE_Keyboard_v.1.0
Regards,
Mansoor Ahmed
It's a hardware problem, your flex cable is worn out.
Dear harveydent,
Keybord is working but not showing in display. after opening keypad screen gets stuck & not rotating, & after closing keypad screen shows exactly what I typed on it.
Regards,
Mansoor Ahmed
I didn't say your keyboard or screen was broken. I said the flex cable was.
The hardware problem is the cable that connects your keyboard/main unit and lcd screen together (the flex cable). So your keyboard 100% works. Your screen 100% works. But when you slide open the phone, the flex cable stretches. Since it's worn out, some connections break when it stretches the main board can no longer send signals to the screen, so it appears to freeze. But the keyboard (and everything else) still work, so you can still type, only YOU CAN'T SEE IT since screen can't get any signals from the board. When you slide the phone back, the connection is restored and you can see what you typed.
Related
i was replacing my g1 digitzer. I had the guide with me still took me 12 hours to figure out how to do it. i disassembled assembled it thousand times before the slide was properly working and touch screen was functional. Now the problem is, something is wrong i cant figure out.
When i open the keyboard the screen doesnt flip orientation. It does on its own.
When i type through keyboard the buttons change randomly and they dont respond to what i am pressing
. The music volume bar shows up it self , the sound is very very very low from the speakers.
Camera still works.
touch screen working perfectly.
The trackball, menu button, and all those on that panel are working fine.
please help me fix this thing
This not the right place for this. But might have somthing to drivers? And know this probly won't help but u should wipe ur phone if you have not all ready.
Youll have done what i did when i swapped my housing round, i missed 1 conntction that stopped my touchscreen working,,, and then i realised i put the keyboard sensor on upside down :how embarrasing smiley:
actually i damaged one of the connectors on the strip of my keyboard
everything else is working now except for few alphanumeric buttons!
my brother gave me the xperia,and he said its broken.the thing is,the phone actually works,but when i slide the keyboard out,my screen goes black.i would like to fix it.the phone works whitout problems,but sometimes i accidentaly slide it,and it goes black,and wifi loads again,blah,blah...so can anyone hhelp me??
if u slide the keyboard than the screen goes blank.. maybe the problem was on the cable flexible... just googling and serching how to reassamble the X1 than se the cable flexible maybe its lax... or if its broken just by the cable flexible and replace the old ones with the new ones.. hope this will help...
yes, sounds like a ribbon issue
read this for starters and follow the advice to search for some more details
gl
Hi,
Xperia X1 is three weeks past warranty. Touch screen suddenly stopped working; Display screen still works fine with keyboard in or out. All hardware buttons and keyboard buttons worked, phone worked OK, it was just the touchscreen that was dead. Never had any display problems when sliding keyboard in and out like I have read in here.
HOWEVER...
My mobile Tech Support told me to reset and now all I have is the initial Windows boot screen that says 'Tap the screen to setup...". WTF? Of course when I tap the screen nothing happens.
Is there a key or button combination I can use to invoke the setup routine? Is there anyway to connect it to a PC and control it? Be nice to get the phone back to working, I can live without the touchscreen for now.
There could be an issue of the flex cable being loose. You could try and open your X1 and re-attach the flex cable and hope it solves the issue.
There are some videos out there that shows you how to do it
I have had my Milestone for a while and it is out of warranty. Recently a narrow strip on the right side (when held vertically) of the phone has stopped responding to touch. It has decommissioned the search softkey, the backspace, L and the P key of the keyboard.
However, I have noticed that the touch response on the left has increased. For instance Q, A, and Z keys respond even if i touch the black edge of the screen, this goes for the back/return softkey as well.
This leads me to conclude that somehow my phone's inner working's alignment to the screen has been disturbed.
I have tried several roms...CM7, Froyomod and stock froyo but the problem remains.
I did use a third-party car charger once that gave me the ghost screen issue. Draining the batter to 0 with the app Battery Refresh and charging it to the full with Milestone charger solved the issue.
I'm in Bangladesh and there is no moto here...there is no support and sending the phone abroad for a fix is not an option. I'll have to fix it myself or save up for a few months to buy something else...not a bootloader locked moto again.
So, any suggestions? or directions I should be going or looking at?
1. The ghost touch appeared for me, too, after flashing FroyoMOD. I left the phone for ~a night slided-out, without battery, micro SD, SIM etc ) and it worked fine for ~5 days. Then, the same right side stopped working. We don't actually know what is the problem (moisture, bad charging, wear of the flex cable, defective digitizer) and we also can't be sure if we replace the digitizer the problem won't appear again. So, I suggest that you should sell the phone.
2. You could get an i9000, an LG 2x or a Desire HD.
L.E. I'm 95% sure that this isn't a software issue, so flashing different ROMs wont help.
same issue...
solution: dumped stone, got galaxy (Y)
My milestone eventually died. No M logo even. Thinking about getting a Huawei U8500 as an interim phone before I get something good.
Try Iphone insted
Once I got the same problem, it was not on the edge, but the middle of the screen & U, J & N keys stopped working. It was under warranty so I got the things replaced.
Touchwood
Atsthe title describes, i have a problem with the phone. After sliding out keyboard, screen goes black.
it started all with black screen, which didnt turn on with power button, either with keys. Did fact reset, changed rom, didnt help.
Now i have a problem, even worser.
When sliding the keyboard, most of the times, phone freezes and reboots.
I have tried to make it more clear with the video.
Thanks in advance
http://youtu.be/5wOsrzrithI
Try pulling the battery or shut it off. Then slide open the keyboard and reboot. If the Motorola logo appears on the screen fine even with the keyboard open then its likely some software issue. If its showing the same symptoms while booting then its a hardware issue.
spunker88 said:
Try pulling the battery or shut it off. Then slide open the keyboard and reboot. If the Motorola logo appears on the screen fine even with the keyboard open then its likely some software issue. If its showing the same symptoms while booting then its a hardware issue.
Click to expand...
Click to collapse
Thanks for the reply. The phone is booting up with the keyboard open, but as soon as i close it it freezes again. I am almost sure it is a hardware problem, but which part. do i have to replace the whole display, or just a cable, if cable, which cable could it be ?
I recently also found out, that the Front camera is not working anymore.
Normal camera gives: unable to initialize error. could it be related with it??
...Its simple. You need new flex cable.
http://www.ebay.com/itm/New-Flex-Ca...r-Motorola-Droid-3-XT862-XT883-/290774966754?
CornholioGSM said:
...Its simple. You need new flex cable.
http://www.ebay.com/itm/New-Flex-Ca...r-Motorola-Droid-3-XT862-XT883-/290774966754?
Click to expand...
Click to collapse
Thank you very much for the reply.
It looks like a flex cable issue for me too, just wanted to make it sure, cuz i dont want to buy other parts and spent much on it .