Hi,
Diamond is not going to bootloader (tricolour) screen after MTTY. MTTY was successful but nothing happening after pressing volumedown+center button.
Now device is just showing - Touch diamond when i switch on.
I have diamimg.nbu on internal storage, is there any way to trigger install.
It was working fine before mtty.
Pull battery out to turn it off.
Put it back in.
Press and hold volume down
Press reset button.
The reason its only showing Touch Diamond is that the MTTY process has cleared off your previous OS. You need to get it back to bootloader and try MTTY again.
I have tried all those stuff but no luck, for every thing diamond just vibrates and shows "Touch Diamond".
I guess boot loader is not working, is there any way to connect to it and repair bootloader.
I have tried snoopy from some post but thats also of now help.
Taken from PPCGeeks:
"Hold down the Volume down key and power button, the take the tip of your stylus and press the soft reset button (bottom left corner of phone under battery cover). After you press reset button keep the Volume down and power button press until the bootloader screen comes up"
Let us know if this works.
Thanks Super....
This is not working, only option i see is some way to connect to it through USB because i had faced this problem earlier also but that time RRU updater used to push it to bootloader.
volume down button used to work only with original HTC ROM for me....only a few time it used to work with cooked ROMs....
Hi,
Anyone can suggest some advance tool which can connect to diamond if its not going to bootloader through normal methods.
Its all clear by MTTY, i have ROM image on internal storage.
Solved finally.......
Hold only volume button pressed, press reset button and immediately after that press ok or back button
Related
Hi guyz,
big problem with my Wings...
I've tried to install SPB Traveller, discovering that doesn't work (was the version for pda).
Then i've disinstalled it and, immediately after, i have no more possibility to press buttons. Only once.
To be more precise...
Switch off the phone removing battery, switch it on again, enetr the pin correctly and, after WM6 screenshot, i'm able to press buttons only once. Not depending from the button...i can pres Start or Contacts, doesn't matter.
After pressing once there's no evidence to have any other button depressed.
I would like to hard reset the phone but, hao can i do if i cannot press any button??
Which is right procedure for hard reset the S730??
There is some shortcut in way not to enter into WM6??
Thanks a lot.
With the phone off, press both softkeys (the ones right under the screen) and then press the power button to turn it on. After a second or so (basically when it starts booting up) release only the power button, but keep the other two pressed.
After a moment you should see a screen asking you if you want to hard reset (you may release the buttons now), press the Send buttont (the green one) and it'll do it.
Soft keys should be "Start" and "Contacts"...i suppose.
I tried many times, releasing Power button keeping softkeys still pressed, immediately after Smart Mobility screenshot....after displaying of radio version, rom version, etc etc.....but it doesn't work.
I think i'm wrong in some passage. Sure that this process works on S730??
Could you be more clear about it, please?
Which boot i have to take care of? Initial settings (radio, rom, etc etc) or Windows Mobile?
Many thanks.
Yep, those are the buttons. And this procedure does work on the S730, as I had to use it once to restore my phone.
The only advise that comes to my mind is to keep the power button pressed a little bit longer than usual, I believe that's what I did.
can somebody PLEASE TELL ME HOW TO HARD RESET THIS THING!??!? i read themanual .. and along with 40 billion forum posts...
VOLUME DOWN and CENTER BUTTON pressed then pressing the reset pin and still holding the volume down and center button DOES NOT WORK.... regardless whether the phone is OFF or on
help
I had the same problem when i tried it the first time!
Try to Soft reset the device and go to the RGB info screen (where you can see the Boot loader version ect.) then hold the center button and volume down and reset the device again. Then it should work!
btw make sure to press the buttons long enough, you need to press it for at least 10 seconds until it has loaded everything for the HR
Actually what needs to be, this is after trying for almost half hour - down volume, center key and Power (not reset). But has Xui said you need to hold it until you get the screen advising you are about to Hard Reset the device.
BTW Mods, can someone update the Diamond Wiki with this info, I da** near broke by buttons thinkink I was not pressing hard enough. When in actuality I should have press the power and not the SoftReset.
This is what I did:
My touch screen doesn't work.
So I have to hard reset the thing.
Hold the power button to turn off the phone completely
Then hold vol down, center key, power button, around 5-6 seconds,
then you see the boot screen.
Thanks guys, you are super and helpful for sure.
hi, please! need help... after I've flash the
Wizard_Love_2.26.10.2_WWE_Novii_CF2 on my G3 device the rom is very slowly and my PC doesn't recognized my wizard when it connected with the USB cable.
any solution how can I change this rom?
many thanks
i can go to the tri-color bootloader mode, is it say somthing?
mine did that yesterday....maybe try a hard reset:
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, [contintue to hold the two side buttons] hold down the navigation pad for ~4 seconds until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.
That's what I did and it worked for me =)
thanks but it doesn't work, the main problem is that after the hard reset the rom is very very slowly (like 7-8 seconds from the moment you tap the "start" till the start menu come)
the PC doesn't recognized my wizard so i can't change to another rom....
I can get into the tri-color mode, does it say that maybe it's not bricked?
my Diamond don't boot after rom update and hard reset. update goes to 100% and no problem but now when i turn on i only see the splash scree that say's "Touch Diamond". Can i solve this?
To enter triggered bootloader mode, you need to take the back off of your phone so you can access the reset hole. Then, you need to simultaneously press the power button, volume down (-) button, and the arrow button (<--) while at the same time, pressing your stylus into the reset hole. I know it sounds nearly impossible, but I am able to do it using two hands for the buttons, and pressing the stylus into the phone with my stomach. Sounds crazy, but it's pretty easy once you've done it a couple of time.
Or get another person to help you with the button pushing..
It's Solved
I have some problem
Can i solve this?
It's Solved
I tried to bootloader mode, recording about 10 different times, Rome and finally came out
Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me