i flashed cyan mod and it only displays the letter h ,is there any way to have it display 3g and i rooted my nexus but i forgot to perform a nandroid backup so all i have is the rooted roms,since i didnt back it up does that put my phone at risk of being damaged in anyway ?????? can any one help me????????
First, Wrong Section.
Second, H is faster than 3G.
Third, Your phone won't be damaged by flashing ROM's.
H is 3G. If you want it to actually say 3G you have to edit the images in framework-res.apk. If you cant do that then flash something else or learn how to
H > 3G
You are not losing anything with the H symbol. Also, there is a questions section for such.
Related
I have a HTC hero with mobi pcs, a hawaiian regional carrier that runs off they own towers and no big parent company (verizon, att,etc). My question is that if I flash to a new rom does the rom get rid of the prl and all the information to connect to the certain network I'm on. The hero is laggy and since the updates go thru the carrier with android I doubt my lil company will update us.
I have checked google n whatnot but when someone asks a question like this the thread always goes into another topic and the original answer is not fully answered. Thanks ya'll!
PS. Cdma network so I thought this would be the right catagorie to post lol
pctechwright said:
I have a HTC hero with mobi pcs, a hawaiian regional carrier that runs off they own towers and no big parent company (verizon, att,etc). My question is that if I flash to a new rom does the rom get rid of the prl and all the information to connect to the certain network I'm on. The hero is laggy and since the updates go thru the carrier with android I doubt my lil company will update us.
I have checked google n whatnot but when someone asks a question like this the thread always goes into another topic and the original answer is not fully answered. Thanks ya'll!
Click to expand...
Click to collapse
cant answer for sure...i BELIEVE a sprint based rom would mess with your service somehow. definatly dont flash fresh2.0d, which DOES affect your pri
sorry i cant be more of a help.
are you rooted? and if so, what recovery?
after my last response, i vaugly remember reading another thread similiar to this. ill link you tomaro
It shouldnt mess with connection. Since im pretty sure a rom doesnt mess with the radio on your phone.
If you do root your phone and get amon-RA-v1.6.2 you can make a nandroid backup. Which is a backup of your entire rom. You can have that to always go back to.
Use DamageControl 2.07.2.. If your connection doesnt go threw right away, then go to setting>about phone>Update Profile and Update PRL.. Both would fix your connections with your carrier.
If that fails to connect, then just nandroid back to your defualt rom.
But im 95% sure it would work.
MAKE sure you do Backup/Restore>Nandroid backup
Jus10o said:
It shouldnt mess with connection. Since im pretty sure a rom doesnt mess with the radio on your phone.
If you do root your phone and get amon-RA-v1.6.2 you can make a nandroid backup. Which is a backup of your entire rom. You can have that to always go back to.
Use DamageControl 2.07.2.. If your connection doesnt go threw right away, then go to setting>about phone>Update Profile and Update PRL.. Both would fix your connections with your carrier.
If that fails to connect, then just nandroid back to your defualt rom.
But im 95% sure it would work.
MAKE sure you do Backup/Restore>Nandroid backup
Click to expand...
Click to collapse
Now I see the ways to root a non Sprint hero with the sprint ruu then choose don't change Pri, flash to sprint ruu and root it that way. I don't like the idea of flashing it to sprint.LOL. what would be the best way to root it?
There is a way to Root non sprint heros.
I think you have to ruin an SD card, but IMO it's worth it.
ALSO
There is a 1 special ROM for NON Sprint Hero's. I really can't for the life of me remember what its called....maybe "Unsung Hero" or something like that.
But it does not mod PRIs or PRLs like some of the Sprint Roms do.
You can search on "Root Non Sprint Hero" to come up with the how to root with a "Gold Card"
Then you can search for
"Non Sprint ROM"
and get that rom for NON Sprint HEROs.
OK OK. Mahalo for everyone speedy reply! VERY HELPFUL!
Now I wonder how to get sprevovery or clockwork on it to do a full backup Oh the stock/unrooted rom. Like as how for I dump this rom so I can recover it later, maybe even with the pri /prl within it in case anything goes wrong. You guys are effing great, so much knowledge here!!!!
My phone is not connecting to 3g anymore. I have tried flashing different radios from flipz. I also tried flashing different roms. Also, when I dial *#*#4636#*#* and change the thing to evdo only it still says 1x. I tried all of the options it has. Can anyone help please.
Does it say you are roaming in "about phone"?
What is your prl version?
What is your signal strength (average dB)?
It says not roaming, the signal strength right now is -88 dbm, the mobile network type is CMDA- 1xRTT,the PRL version is 60670. I got an app called Real Signal and sometimes the CMDA signal is full while the EvDO is always empty
If I download the 2.1 update from htc.com/us/support/hero-sprint/downloads/ will that fix it? And will I be able to root it and flash a custom rom
lemendoza said:
If I download the 2.1 update from htc.com/us/support/hero-sprint/downloads/ will that fix it? And will I be able to root it and flash a custom rom
Click to expand...
Click to collapse
Yes, the 2.1 RUU from Sprint/HTC can be rooted. It's worth a shot to see if it fixes your error. Many people run this RUU from time to time when errors happen that can't seem to be fixed/solved. It will often fix the errors, and then they can re-root and go back to custom roms.
Alright, I'll give it a shot!
Is there a .zip file instead of an .exe or do I have to update it following their instructions to maxmize my chances of fixing the error?
hi,i am using milestone 3(ME863)@Hong Kong version.
after i flashed DROID3-CM9-03-28-SELFKANG, my 3g data no longer works, the signal is fine, i can make/receive calls but as for data, market/internet anything requiring a connection it just does not work unless connected to a wifi network.
Moreover, i have changed the build.prop to gsm but i still cannot use 3g data.
so how can i get back the 3g data?
(sorry for my bad english )
there's a new issue, after i pressed the USA band, my phone did not have any signal. How can i get back the signal?
Searching pays. There's this fix here. The poster uses a XT862 but has XT883's (a.k.a ME863) radio installed on it so his phone should be on the same page as yours and you can safely try this fix. There are lot of guys here using Droid 3 on GSM so you should look around a bit.
Good luck!
blackbuddha said:
Searching pays. There's this fix here. The poster uses a XT862 but has XT883's (a.k.a ME863) radio installed on it so his phone should be on the same page as yours and you can safely try this fix. There are lot of guys here using Droid 3 on GSM so you should look around a bit.
Good luck!
Click to expand...
Click to collapse
thx for your reply. But i still cannot get any 3g data after replaced the build.prop, i only receive the signal. However, when i changed back to stock rom, i can use 3G data and signal. Moreover, i modified the libmoto_ril.so. i can receive 3G data for a second. After that it will disconnect automatically and then it will turn on for a second again.
How can i solve the problem?
justin6b37 said:
there's a new issue, after i pressed the USA band, my phone did not have any signal. How can i get back the signal?
Click to expand...
Click to collapse
Have you updated the internet settings in the device? After flashing CM9 and if you are using GSM, you have to manually go in and set the wap settings if they are not correct on the sim card.
clorox.bleach said:
Have you updated the internet settings in the device? After flashing CM9 and if you are using GSM, you have to manually go in and set the wap settings if they are not correct on the sim card.
Click to expand...
Click to collapse
thx for your reply. After i flash cm9 again, i can get the signal again but the new problem is that i cannot use 3g data....
Are that all of the custom roms in this froum cannot support gsm 3g data? i changed the build.prop of all that rom but i still cannot use 3g data
There might be a solution for the 3G Data Connection.
I have a Droid 3 XT862 with the Chinese Radio (XT883 as yours i believe) and my provider is AT&T. I am running CM9 and after i used the buid.prop from this link:
http://forum.xda-developers.com/showpost.php?p=23884104&postcount=1368
3G connection worked just fine. Don't try to flash this zip file through safestrap as it won't (at least no go for my occasion). Uznip it and copy the build.prop file to sd card. Then move it to /system by using Root Explorer (so you can mount /system as RW). Before do that, rename the old build.prop to build.prop.bak so you can have a copy in case new one won't work. You must also change the permissions to the new build.prop to rw-r-r . Finally reboot your phone and see if it will work.
My phone is running CM9 with XT883 radio and my 3G is working just fine.
Hi Friend
[HELP]
i have this N1 amoled , no othe rsmartphone so i m very sad !!
i have this N1
NEXUS ONE FCC ID:NM8PB99100 IC:4115B-PB99100
i Make a big mistake
i read this page because i have power button dead
Downgrade the phone to Android 2.2 from 2.3.4 or 2.3.6
i download this
Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ROM.zip.
after i loose 3g , only cell phone i can used
didi I used the AT&T instead of firmware At Mobile International ?
can someone help me to understand ,i try to read but is not easy , i don like make other big mistake i have only this phone
On Nexus the radio is the same for both models.
You probably just didn't enter the correct APN that was there for your previous ROM (or you defined it).
Why do you need to downgrade it?
Jack_R1 said:
On Nexus the radio is the same for both models.
You probably just didn't enter the correct APN that was there for your previous ROM (or you defined it).
Why do you need to downgrade it?
Click to expand...
Click to collapse
i 'd like mod JB root ect
i need to downgrade
Because i have broken power button ,
and a day n1
was blocked in boot , don t star anymore
so i go read this site
myexpeditions.blogspot.it/#!/2011/11/nexus-one-with-broken-power-button.html
after this i can make call with N1
but no 3g for internet
now in setting apn button i cannot select because is turn of
what happened ?
excuse for english
thank for help me
[solved]
thank for help
there was a problem with apn antenna inmy city
excuse
Hey there guys. I made an account here because I seriously don't know what to do. I've been googling how to get T-mobile's 3/4G
on the LG Thrill and I saw that you could flash the V21 baseband and it "supposively" works. The thing is I'm on ICS Stock 4.0.4
unrooted since all the tutorials I've tried end in a failure, and I'd like to get the baseband on ICS.
Is there any way it could work?
By the way, if it can't (or is too complicated) Can you guys help me on how to root and flash the baseband as is. So I can just get
better speeds (anything is better than Edge)
i know that i am wondering the same thing... for some reason i can get 4G in certain areas but it wont pick up 4g when im at home.
EDIT:
I've noticed if I go under settings and search for networks that sometimes "UMTS" is listed in certain areas and I can register on the network but its certain areas for some reason.
EDIT2:
I was able to successfully flash the v18a baseband onto the phone.When using the LG Flash Tool make sure to use a LGP920.dll instead of LGP925.dll. It took forever to register on the network though but it works!
Desertfury said:
i know that i am wondering the same thing... for some reason i can get 4G in certain areas but it wont pick up 4g when im at home.
EDIT:
I've noticed if I go under settings and search for networks that sometimes "UMTS" is listed in certain areas and I can register on the network but its certain areas for some reason.
EDIT2:
I was able to successfully flash the v18a baseband onto the phone.When using the LG Flash Tool make sure to use a LGP920.dll instead of LGP925.dll. It took forever to register on the network though but it works!
Click to expand...
Click to collapse
can you post exactly what you did to flash the baseband? I have an fls file here and no idea what to do with it
http://forum.xda-developers.com/showthread.php?t=2195753
drastic00 said:
http://forum.xda-developers.com/showthread.php?t=2195753
Click to expand...
Click to collapse
I follow the procedure for flashing the .fls file and flash tool gives me and error in 5 secs
Download FAIL!! (5 sec)
PID: NULL
IMEI: NULL
RomBinary Download start
lgp925_v30b_00_cp.fls
F0000002
FAIL
am I doing something wrong?
Probably it is incorrect driver install. Be sure to Uninstall all LG stuff, reboot pc and follow all details carefully, esp. section 1. Log on to pc as admin for everything. Remember baseband flash will 'fail' after 80 or so seconds, but that means it worked...