Missing security Tab in Bluetooth setting - XPERIA X1 ROM Development

Hi all,
I am using the Rom cooked by NRGZ28
I tired to put this question in in the tread, however, no one seems to notice my voice.
I had both Energy.KOVSKY.23544.Sense2.5_with_Cookie.Mar.13 .7z ROM and
Energy.KOVSKY.23544.Sense2.5_with_Cookie.Mar.5 .7z ROM flashed on my phone
and both couldn't find the security tab that was supposed to be under the bluetooth setting, I need to switch off the password for connection option.
hoping someone is kind enough to help me solve this issue
thanks a lot!

same problem here!!!! plz help

never find a security bluetooth setting in a rom cook, you guys.
i've tried a lot of cooked rom in xda and most of them missed it always.

celarbi said:
never find a security bluetooth setting in a rom cook, you guys.
i've tried a lot of cooked rom in xda and most of them missed it always.
Click to expand...
Click to collapse
so how are we going to connect with device which you cannot enter paring code with ?

same problem here

here the same problem on Valkirie 6.1

Me too. I also noticed that there is a duplicate of one tab.

really do need help !!

Don't know the rom you guys are using, but I use Christian's Clean Rom with 23545 and this has the Security Tab of course. Perhaps you want to try that one.
Regards

Related

Anyone got WM6 for Charmer ? :|

I'm dying waiting If any one got some news. please share
ValkyrieLenneth said:
I'm dying waiting If any one got some news. please share
Click to expand...
Click to collapse
yeah im running it. you use the wizard base rom and replace wavedev.dll and battdrvr.dll with ones from the prophet rom to get the sound and battery working. install arcsoft to restore mms. no camera support though. looking into it.
one of the big errors though is that coming out of sleep soft resets it, so doesnt make it very practical!!
edit: apparently the battery needs to get used to wm6 and the soft reseting stops after a few days, mine now has
WM6 for Charmer
Could you send me a PM with a short instroduction for installing the wm6?
mfg
softonic123
i can crossbow on charmer too
Can anyone please email it to me @ [email protected] ? thank you
and me
could u allso send it me please with the roms aswell [email protected]
well, i'm seriously interested also - i would be glad if anybody may send me WM6 ROM image through any of common sharing services
And why didn't we take the os from prophet?? With its batarry and wave dll
i have it!
i have the rom ! ya just got to patch it to run on charmer ! woop! will let u guys know how to fix it!
samwood said:
i have the rom ! ya just got to patch it to run on charmer ! woop! will let u guys know how to fix it!
Click to expand...
Click to collapse
Hi, Samvood
Could You give us some info about the ROM please? Which ROM is that one based on?
Regards
Radek
its the wizard rom
ive got the nk.nbf file
@Samwood:
Have you flashed your device with that nk.nbf file? does it work?!
share!
Is this modified ROM uploaded somewhere?I would like to toast and testi it
Any suggestion to madkoe[AT]gmail.com thanks
trying
still trying to flash device with this rom,i need some help with flashing it plz
WARNING!
still trying having trouble
and what about tricolor mode on your brick? it is possible?
still working
im still working on it, yeah i got it into the bootloader, and reflashed it, im just trying to see what went wrong, could anyone else help who have sucscessfully done it on there charmer?
Are these versions of WM6 final or just beta builds?
I'm looking forward to flash my Charmer (MDAcII) to WM6, but I won't try to mess up my phone with some beta rom.
BTW: Any ideas if WLAN will work under WM6? According to 'some' posts here in the forum, WM5 + WLAN on Charmer = Not working properly. :-/
Bye, Youser
youser said:
Are these versions of WM6 final or just beta builds?
I'm looking forward to flash my Charmer (MDAcII) to WM6, but I won't try to mess up my phone with some beta rom.
BTW: Any ideas if WLAN will work under WM6? According to 'some' posts here in the forum, WM5 + WLAN on Charmer = Not working properly. :-/
Bye, Youser
Click to expand...
Click to collapse
everythings beta, there will never be a official wm6 final as htc will only develop wm6 for new models. as for the wlan stuff, wm5 wasnt the problem it was the drivers written for it by the wifi card maker.
imo wm6 isnt worth it, its not finished, big problem with standby, the camera doesnt work, mms isnt included as standard. it just looks pretty, and that can be done on a wm5 device anyway.
ok, thx for the feedback ;-)

urgent help

i had kaiser and i instal some of the roms on it but the last rom didnot appear any sound of the mobile it vibrate only no sound at all then i install another rom the same problem please help no sound at all what can i do
Go back to the ROM that did work, or search for the fix (if there is one) for that ROM. Did you install the ROM named
rusty_hook_v4_I_have_no_idea_what_ROM_you_are_using ?
Was it a Windows Mobile 6.1 rom?
you hear no sound because you did not install the appropriate radio for the cooked ROM. Search the cooked ROM thread and find out which radio to use or even easier loook through forums and people usually put the ROM they are using and the RADIO version as a signature on their name. Once you do that you should be fine. I had the same problem and I was going psycho but i figured it out.
thanks alot
thanks alot for ur reply i had solved the problem by instaling the original rom for tytn ii
you really didn't solve the problem you just avoided the fix. Re-install the ROM you really wanted and do a search in the forum for Kaiser Radios... maybe someone would be kind enough to post a link to the thread. Flash the radio into your device and you should be fine, i promise. You may also need to download the Keyboard fix because the keys may be thrown off by one on the keyboard after the rom update. You can find that in the CAB Collection Tread. C'mon people lets not be lazy.
gqstatus0685 is right - install the rom you want to use then look here to install the correct radio.

Blackberry Connect - bbconnect - on Touch Diamond

Hi All.
So here we go again - trying to get Blackberry Connect to work on a new device..... so we've succeeded on the Kaiser and Touch Dual with both original and cooked rom's but I can't get any version to work on the new Diamond - received mine yesterday after frying the mini usb port on my Touch Dual and its one of the 1st things I installed? I've tried all the current fixes (I think) most of them summarized here in Elec.Two's post:
http://forum.xda-developers.com/showthread.php?t=371652
I'm hoping there will be a few others out there working on the same problem - I've just changed my aku back to .1.1.4 - I can get the device to sync when connected using activesync as a pass-through connection but get the "old" data tunnel available message and then it flips to "not connected" .....
I'll keep trying and keep this thread updated but could really use some help!
Hi, Im trying to change the name of this. I would like to change it to HTC-Herm200 or someting else. But I dont know what the build number have to be there. Anyone know ?
this has NOTHING to do with rom development... use some sense people! moving thread!
ROM Development????
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?
Im tying to change in HEX Editor the Signatures. For example there are DIAM100 (or DIAM10000) and build 19588. I changed it to HERM200 and 19588->17745. I can change it without changing the size of .nbh. But thre are "Diamont" Signatures too and by changing Diamong->Hermes wir have one less character (7->6). It changed the size of the .nbh.
So im trying to flash it to the Diamond nad about 96% OK, but then ROM flash error.
A meaning of it all is that it have to work, because RIM asks the Number and NAME and then when its in the list->OK, NO->pending.
I need some tools like SSPL 1.34 and ROMUpdate Utility that dont asks of CRC or something else.
Please Help
I've seen a few members reporting that they have a later ROM version > 1.35.707.3 - See thread http://forum.xda-developers.com/showthread.php?t=394985&page=12 I have not been able to find this as an officially released ROM and I'm not aware that its been dumped as yet? This slightly newer ROM may help solve the problems and may help usap with his question on the version number?
If there's anyone out there who know's the AKU and the version number for ROM 1.35.707.3 can you let us know???
Thanks
Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?
Click to expand...
Click to collapse
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.
walshieau said:
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.
Click to expand...
Click to collapse
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM
Blob8me said:
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM
Click to expand...
Click to collapse
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
Click to expand...
Click to collapse
I'm not sure who to agree with...it really shouldn't matter so much to people.
Dark Fire said:
I'm not sure who to agree with...it really shouldn't matter so much to people.
Click to expand...
Click to collapse
Agreed - It shouldn't matter and here it will stay
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? Apparently - despite the popularity of "our" site less than 5% of device owners actually change anything on their phone never mind update firmware - official or otherwise? HTC are trying to minimise "support" issues by ironing out as many bugs before the next release - I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Thanks again.....
Blob8me said:
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? ... I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Click to expand...
Click to collapse
Yep, all of the evidence suggests that that's the reason behind the delayed release in Europe. New ROM. Hopefully with none of the bugs we've found so far (but I doubt it).
And that's a really interesting fact. It would be both nice and worrying to know that we influence them. (Nice when good devices like the Touch Diamond are announced, but worrying when there are major problems, such as that big driver problem).
Offtop (maybe)
I was playing yesterday with another phone and became the ROM extracted. So Registry and some of the files have the name of it in it. And I changed it to another name (Herm200 and HTC-HERMES) so that after the recreating and flashing the ROM it was everywhere Hermes. But PHONE ROM was dead (No signal, no phone). There were some imei*.pfg and some *.rgu and *.dsm where I changed all to HTC-HERMES and HERM200. So I had to flashing it to normal ROM.
And by the Diamond i worked with not extracted ROM. So i think there are 2 roads to change it: in extracted and not extracted ROM.
What do you think about it?
UPDATE on 1.34.831.1 and bbconnect?
Have just tried all the usual routes with the new EU Rom (details below) having used OliNex's SPL to Flash:
ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H
Still no success..... I've seen that there are other Roms also out there such as 1.35.871.5 but not yet available?
I was hoping that the Stock EU Rom would be OK as in the past the Stock "Official" Roms have run bbconnect with no changes and no problems???
If anyone has any other suggestions then your help would be greatly appreciated?
UPDATE ON Elite 1.0 and bbconnect....
Still nothings working - Sigh.....
I've got a specific request in the main Elite 1.0 Rom thread for walshieau to add bbconnect support now that HSPL is released - so hoping it wont be too long now!
walshieau said:
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Click to expand...
Click to collapse
walshieau - any news on working on a solution now that we have HSPL out???? Can you add bbconnect compatability to the next Elite release????
UPDATE on 1.37.405 and bbconnect
Just added a comment on the main thread for this, the latest WWE EU Rom Release...... still not playing....
USAP - Any more thoughts??
walshieau - come on - you promised to help with a solution.....??? Help me out here????
Refresh......
Just refreshing as I'm getting desperate for a solution as I use the blackberry function for work and really don't want to switch back to my touch dual - has ANYONE had any success on the diamond with bbconnect?
Another "post" refresh.....
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?
Blob8me said:
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?
Click to expand...
Click to collapse
me waiting for a solution also. from what i notice, we just need 1 carrier to support bb on the diamond n we r all set. currently this is what i hav experience with the touch n touch dual which i have been able to connect despite local carrier not supporting it.
give a shout out if u do come across a solution though.

Himalaya 6.5 5.2.23001 (Build 23001.5.0.60)WWE 32MB_RD 20/07/2009 by swampy395

Here's the release of my 6.5 23001 ROM it's Fast and staible,
I'd like to say Thanks to all the people that have given there tools and shared there work on this site like Bepe,Itsme,Explode,SunDream,Da_G and Many more how's names I'v missed
Explode for his help over the last 2 year's or so, Thanks mate
Thanks Guy's you all Rock
If you change the descktop theme do a soft reset and then your dialer will match your desktop
Change Log
build v1.01 ------ had camera bug fixed in v1.20
build v1.20 ------ New start menu layout, and some small tweeks
build v1.20 32MB RamDisk
Download v1.20_Rom
http://www.4shared.com/file/119359561/8e4616b1/Swampy395_Hima_23001_5_0_60_v1_20.html
If you want Titanium Weather go here http://forum.xda-developers.com/showthread.php?t=487090
and get Showaco-Titanium-Weather-QVGA-by-Mnemonique-v3e-M2D-Icons.cab
MMS install the 2 cab's then run networkwizard from settings\connections
enjoy best regards
swampy395
Hi swampy,
Sounds interesting, I'll flashing it, to try.
EDIT
Camera is not working on this?
download and install a good job
Thank very much for your hard work.
Will give it a go
Thank you swampy =)
Already downloaded the file and flashed it to my fon. Flashing time is reduced from 30-40 minutes to just 13 minutes. Its fast and stable. Been using it now, i'll observe it and report any bugs i may encounter.
WOW, good work!!
Really fast and stable, faster than 21232 (I think) Really great work!
new build
Hi guys an gals
New v1.20 5.2.23001 see post (1)
Beta removed it seems staible
regards
swampy395
Flashing now. Really well done, swampy395.
Edit: Video mode fails - Camera is working
I like the new edited start menu, most.
:d 漂亮
Thank you for your 23001!
But the line download can not do for me,can you take it in "brsbox.com",thank you very much!
Req. Kindly please help me
Sir Swampy,
Please kindly help me...can you cooked with your rom with this app Extendir v.103, I greatly appreciate your rom when I flash it with my xda 2 it was fast and stable thats why I wanted to try to cooked with extendir...please help me
This is the post:
http://forum.xda-developers.com/showthread.php?t=530710
macleo said:
Sir Swampy,
Please kindly help me...can you cooked with your rom with this app Extendir v.103, I greatly appreciate your rom when I flash it with my xda 2 it was fast and stable thats why I wanted to try to cooked with extendir...please help me
This is the post:
http://forum.xda-developers.com/showthread.php?t=530710
Click to expand...
Click to collapse
Hi mate
sorry but from what i read about this app you have to have wince_nls in the XIP and there's not enougth space in XIP, so It's a none starter
there's so little space left in the rom now with 6.5 that were gona need to find some other way to do things, we may make it to the end of 6.5 there's a small cab with my rom and that don't fit in the rom that's Y it's in the cab
but wm7 needs hardware we don't have in our devices
regards
swampy395
very nice and fast ROM, thank you
but I am having problem with external bluetooth GPS module. I turn ON bluetooth on the device and the module. Then pair it and select to use "Serial Port". But the device is listed as Disconnected and when I try to connect, it says: "Your device did not connect with GW-GPS-005. The connection failed or the passcode is incorrect."
Passcode is correct and in WM5, 6.1 and some beta 6.5 it worked just fine
edit: same problem when connecting to Nokia 6260. Will try flashing some WM6 ROM to be sure the BT on Himalaya is working(worked last week, but to be sure)
edit 2: so the BT is working, but every 6.5 ROM I tried can't connect to anything... can someone please test if their bluetooth is working? please please
Hi mate, once again thank you for this update. Great job my friend ! ! !
Flashing again finished in just 13 minutes, start menu folders multimedia, accessories and communication now been updated. And flashing with this rom did not made any changes to the installed programs in my previous rom specially contact numbers,titanium theme and other components except for time settings, ringtone and task bar icons which have to reset or reinstalled. Noted speed and stability is still present. Is this related to flashing rom without losing data thread in development and hacking section? just curious
wow!
wow! another wm6.5 rom!
hi,
how can i do a german version of this? ive got this mui files from efsane http://ahorn.todesmut.org/wm6.5_0407_mui_ctrlpda.zip (pw: ctrlpda) for german language. can i use the kitchen by sun_dream or do i need another kitchen?
MK[PCTF] said:
very nice and fast ROM, thank you
but I am having problem with external bluetooth GPS module. I turn ON bluetooth on the device and the module. Then pair it and select to use "Serial Port". But the device is listed as Disconnected and when I try to connect, it says: "Your device did not connect with GW-GPS-005. The connection failed or the passcode is incorrect."
Passcode is correct and in WM5, 6.1 and some beta 6.5 it worked just fine
edit: same problem when connecting to Nokia 6260. Will try flashing some WM6 ROM to be sure the BT on Himalaya is working(worked last week, but to be sure)
edit 2: so the BT is working, but every 6.5 ROM I tried can't connect to anything... can someone please test if their bluetooth is working? please please
Click to expand...
Click to collapse
Hi mate
Over the last 2 years or so I'v had with many rom this sort of probs with GPS devices in 6.1 and more so in 6.5 ROM's
1) work round is to pair some other device/s IE: PC, Headset, or some other phone ETC. then pair GPS, It will then have to use a different port/dma/irq etc..
Over on Blue Angel forum "GloomyBoy" did a tutorial on fixing some probs with 6.5 an GPS it's worth a look
I'v just paired my bt_gps ok, It's unbranded don't know it's make got it with hima 4 years ago
Please let me know how you get on and ill see if its something that can be builtin
regards
swampy395
japo_g said:
Hi mate, once again thank you for this update. Great job my friend ! ! !
Flashing again finished in just 13 minutes, start menu folders multimedia, accessories and communication now been updated. And flashing with this rom did not made any changes to the installed programs in my previous rom specially contact numbers,titanium theme and other components except for time settings, ringtone and task bar icons which have to reset or reinstalled. Noted speed and stability is still present. Is this related to flashing rom without losing data thread in development and hacking section? just curious
Click to expand...
Click to collapse
most times if you had programs installed to ramdisk then there still there after a reflash but not every time if new rom ramdisk size not same as last then it will be lost for sure,
P.S. after you flashed the ROM in the upgrade folder there's a file RUULog.log can you past it's contents or zip it here so i can see, Y your flash time is so short as it's 40 mins with my dual core 2gHz laptop
regards
swampy395
ahorn said:
hi,
how can i do a german version of this? ive got this mui files from efsane http://ahorn.todesmut.org/wm6.5_0407_mui_ctrlpda.zip (pw: ctrlpda) for german language. can i use the kitchen by sun_dream or do i need another kitchen?
Click to expand...
Click to collapse
Hi mate
sorry i tryed porting to another language once before and didn't manage it,
i'v seen a tutorial, I think in hima forum how to doit but, you'll have to search it out and try it,
Note when building for any other language than "WWE" there are more file and there larger too, Space is in short supply
not saying it can't be done but it will be hard good luck
regards
swampy395
Thanks very much for reply!
I looked over at the Blue Angel forum and the tutorial is basicaly the same I did every time when pairing my Hima with the GPS on WM5, 6 or 6.1 but is not working on 6.5(for me) because the dang thing is somehow unable to connect.
So I tried to pair something else. Headset is working fine and other phones not.
But this is no issue with your ROM, my Hima can't connect to anything on any 6.5 ROM as I found out. The only option for me is to flash 6.1 ROM and live with it, because I use the phone only as a GPS navigation
Still, thanks for your time, your ROM is realy nice, fast and all

Help to newb

Hi, I just now got my fist HTC Diamond 2(topaz). It is my first windows mobile phone and I was really excited about upgrading to 6.5, but it is not coming out any soon . However I am little confused how to do that. So can you tell which rom should I use for my HTC topaz. Please step by step... thx... Would prefer most stable Rom,
Is there also dictionary somewhere.. I don't know what all these words me... cooked...radio.. and so on..
(I googled but roms come out very fast.... and couldn't find any good tutorials..)
Dking7 said:
Hi, I just now got my fist HTC Diamond 2(topaz). It is my first windows mobile phone and I was really excited about upgrading to 6.5, but it is not coming out any soon . However I am little confused how to do that. So can you tell which rom should I use for my HTC topaz. Please step by step... thx... Would prefer most stable Rom,
Is there also dictionary somewhere.. I don't know what all these words me... cooked...radio.. and so on..
(I googled but roms come out very fast.... and couldn't find any good tutorials..)
Click to expand...
Click to collapse
....first install HardSLP!
....second:
Radio Rom: resposible for gsm signal, wifi...
...third:
Cooked Roms:
Our Chiefs are always cooking roms with the newest applications and share them to us.
In the benchmark you can see which rom is the fastest. But I woud suggest you just try them out!
Are you 100 % sure that as a newbie you really need to flash new rom first? Why not to get to know your device a bit before making any changes?
zimmicz said:
Are you 100 % sure that as a newbie you really need to flash new rom first? Why not to get to know your device a bit before making any changes?
Click to expand...
Click to collapse
...first install HardSLP!
....second:
Radio Rom: resposible for gsm signal, wifi...
...third:
Cooked Roms:
Our Chiefs are always cooking roms with the newest applications and share them to us.
In the benchmark you can see which rom is the fastest. But I woud suggest you just try them out!
Click to expand...
Click to collapse
well maybe I will use 6.1 for a month then switch to 6.5..
thx.. helped a lot
probably in september we will see new phones with wm6.5, I've read about it in czech forum today (official information from czech office of microsoft)

Categories

Resources