I need a nice case for my HD2 - HD2 Accessories

Hello friends!
This is one of my very few posts. It's not that i am shy, it's just that the people here are so good in what they do - i end up having all of my questions answered before i even get a chance to ask them.
Well now i think there is one i can still ask.
I need a nice case for my Leo. The one they give you just offers no real protection and i can't attach it to my belt (which i really like). So i am curious if someone can sudjest one which doesn't cost more than 30€.
Thank you all in advance!

case
what about this one
pm me

try the Krusell one - they are always quality and last well I have been using them for ~8 years. http://krusell.se/nav/searchResults/?searchString=HTC+HD2

You should find all you want to know here...http://forum.xda-developers.com/showthread.php?t=578283
WB

Thanks guys you were really helpful!

I use the one that came with the tmo us hd2.

A word of warning about this Krusell case.
Just had one of these delivered today and will be sending it straight back! very nicely made with some good design features BUT I can't use my phone properly. There is a leather strip at the top of the screen that makes it impossible to use the top task bar features, even with my little finger.

4braid said:
A word of warning about this Krusell case.
Just had one of these delivered today and will be sending it straight back! very nicely made with some good design features BUT I can't use my phone properly. There is a leather strip at the top of the screen that makes it impossible to use the top task bar features, even with my little finger.
Click to expand...
Click to collapse
Do you have the TMO US version? Your phone is larger than the spec for this case, so it won't fit properly. I've run into the same problem with my UK Tuff Luv case (QUITE a nice case, as well! Shame!). I'm afraid the premium cases will have to be re-sorted for the HD2-US versions, and, until then, we're pretty much stuck with gel-skins

Related

Crystal Case...thoughts...

Im looking at either getting the nice leather case, the official HTC one "Diamond Pouch PO S390" (seen in this thread here... http://forum.xda-developers.com/showthread.php?t=403691) or this http://cgi.ebay.co.uk/HTC-Touch-Dia...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
Anyone got a crystal case for their Touch Diamond? If so whats it like?
Im looking to protect my Diamond as I know how easy to scratch and mark they are (its doing ok at the moment but id like to keep it protected and looking like new)
Thanks, any feedback would be appreciated
I got one yesterday ( for $15 CDN ==" since i didn't want to wait for shipping)
from what i've seen so far
Seems like a great case, it is a tight fit for the diamond, so there are some worries with regards to upgrading the battery in the future....
But aside from that, it does its job of protecting my diamond and the change in dimensiosn is barely noticeable to me.
Moderators Could you move this to Diamond Accessories please, sorry, thought I had posted it in there, but hadnt.
Thanks for the feedback, sounds positive, I want to get a leather case, but at the same time its nice if i can just use it rather than get it out of the leather case to use it.
Mmm, food for thought!
yse mods please move the thread ^^"
i was contemplating the leather case as well before...
the benefit to the hard case is that its as it doesn't make it more difficult to access the phone and you dont need to take it out of the case to do anything
the only pet peeve i have with my case is that the power button on the top left is now a bit harder to press due to the case
just my 2 cents
Most of the crystal cases i have come across are dust magnets...so that puts me off them. Ive ordered the pouch today from Expansys...the official one although i have to wait 3 days before they come into stock..
Had one of these plastic cases on a samsung phone - the case cracked after a few days Lets hope these are different
One reason why im staying off silicon/crystal cases is so that I could enjoy the flushed screen.
Strange.. U guys don't seem to find it a luxury to have a flushed screen. I love it as I don't need to finger-wrestle in order to tap the 'X' button...
MasK, thats a very good point! I know what you mean there, very frustrating.
Mmm, think im just gonna opt for the Leather Case. Think I would just get frustrated with the Crystal Case.
Thanks for your feedback and comments guys.
Slightly off topic...
But do you think somebody (HTC or after-market company) will produce a soft touch / matt finish rear cover for the Diamond? I mean, its an easily replaceable, small piece of plastic and would protect (or hide) fingerprints and make it less scratchy if its soft?
Just a though... if any external companies looking it at, I'll pay £2.99 for a rip off soft touch back cover on eBay from Hong Kong
DG

New case!

OK then,
I was going to get a new housing for my sad looking Ameo. They come in the standard Ameo silver or a rather smart HTC black. I already have a silver case, but here is the question.
Do the black housings, wear, scratch, or paint rub away easy? I don't want to get one and find it looks crap after six months. They ain't cheap! before anyone else says it, I know it depends how you treat it. I'm on about normal wear and tear use. How does yours look now? are there any signs of the metal underneath showing?
Regards
Jay
Black Case On The "advantage"...
Hey Jay,
I have a HTC Advantage x7501, with the black case of course, and have been using it with "typical" every-day use now for about 6 months. I have never even seen one of the silver cased "Ameo" versions of the device in person, so my review is a bit "one-sided," if you will... Also, I have a friend with whom I work with that also owns the same model as I. With saying all that, and without having experienced the silver model, I would bet the silver model would hold up a bit better on the finish due to the fact that if the silver gets scratched, the metal beneath it looks much closer to the silver finish than the black. I have a couple small blemishes on mine, and I am very particular with my mobile devices, but after using day-by-day at work and home, it has managed to get marked up just a bit. The biggest problem is, if you get a scratch on it, the metal below sticks out "like a sore thumb!"
I definitely believe that the black finish is a bit more professional looking, where sometimes the silver finishes can make a device look cheap or make it stand out.
Anyways, to give you my honest account on TWO Advantage x7501 devices (black finish) after 6 or so months of daily use, it is overall good, and neither one shows any major signs of wearing finish. Also, we both use a case that the device "slides" tightly in and out of each time you use it (without the keyboard attatched), and the device really hasn't shown any real signs of wear on the sides where it rubs the case. However, if you do happen to mark it up in any way, you will definitely notice it. Again, I am very picky, so keep that in mind, but so you have a better idea of what I am saying, I attatched a couple of pics so you can see what it looks like when or if you do scratch or mark it.
HOPE THIS HELPS!!!
-Ryan
Also Note: Only one of the devices I wrote about is pictured, but are very similar in condition, and were both purchased slightly used.
X7501 Cosmetics...
I have had my X7501 for almost 10 months now and it only has one very tiny mark on the top right corner (you have to look hard to even see it).
Since I'm also very particular about my devices (I always keep them looking new) I just used a Sharpie (permanent marking pen) to "erase" the offending mark. This works great and I would recommend it to anyone wanting to touch-up black anodized aluminum like the Athena housing.
Wow! thanks for the reply Guys, Ryan that was one hell of a reply. Must have took you a while to do that and I appreciate it. toyfreak, the idea with the marker pen is a great one. I think on just that idea alone I will get black. Its harder to touch up silver! It looks better too.
Regards
Jay
Indeed is surprisingly hard coating, I carry mine in my pockets and can't say I'm careful with it, rather the opposite, I have it since it came out and there is only a little wear in one of the corners, hardly noticeable, where the scratches are more visible, is on the silver border next to the screen, not that it look bad or anything.
Black housing - Where?
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Silver / AMEO
Hi guys,
Proud owner of a wonderful brick since 6 months in grey color I should say that if I new I would have choosen a different color.
The grey AMEO housing is far from being "time resistant"...
Since few weeks the "video camera" around the front cam as disappeared and the "Alert" will soon do the same.
I allways take good care of my stuf and I'am bit disapointed for a 1.000 bucks machine to see it !
hmeyer said:
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Click to expand...
Click to collapse
They are available on ebay, if you search athena case you should find them. any problems then let me know. There is a guy who does spares on there and he has them in black or Silver.
regards
Jay
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
responderman said:
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
Click to expand...
Click to collapse
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
tootallk2000 said:
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
Click to expand...
Click to collapse
Forgive my ignorance, What is the difference?
Jay
responderman said:
Forgive my ignorance, What is the difference?
Jay
Click to expand...
Click to collapse
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
I need a new housing too.
Anychance you could PM me a link or contact for this.
Thanks in advance.
tootallk2000 said:
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
Click to expand...
Click to collapse
7501 does have 2 cams. the 7510 doesnt
goodluckje said:
7501 does have 2 cams. the 7510 doesnt
Click to expand...
Click to collapse
LMAO dude have you been drinking? The 7501 has 1 camera and the 7500 and the 7510 has 2. I own the 7501 which is also cheaper than the 7500. I suggest you google them and you'll see the difference.
tootallk is correct. 7501 has 1.
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
wgary said:
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
Click to expand...
Click to collapse
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
oops my bad.
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
Here you go,
http://search.stores.ebay.co.uk/sk-...shopQQfsooZ1QQfsopZ1QQsaselZ239115870QQsofpZ0
Not cheap though!
Jay
P.S if im in trouble "Madbird" made me do it

New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL

New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...
Added Pictures...
Added pictures...
nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.
cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.
nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!
Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com
Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?
Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.
We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024
finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.
Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.
Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell
This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.

Case Mate Barely There for HD2 TMO_US

For any one who likes their Case Mate cover on their iPod and other products, you might find that the current HD2 cover by Case Mate DOES NOT fit the TMO-US model which is 1.5mm different. I think if Case Mate receives a spark of interest for this item through phone calls from TMOUS HD2 owners, They may want to comply with the demand.......give them a call as I did. They close at 5PM Eastern Time
CALL CASE MATE at 1-866-689-3432 AND HELP BUILT DEMAND for a great product. I find it interesting that they show a cover for the iPad on their website BEFORE its is even available for purchase but no cover for the best phone on the US market.
CALL CASE MATE 1-866-689-3432
i thought i read in the cases thread that they are already making it
methodz said:
i thought i read in the cases thread that they are already making it
Click to expand...
Click to collapse
They, in fact, do make it......for the "international version" HTC HD2, NOT TMO_US HD2.
http://www.case-mate.com/HTC-HD2-Cases/Case-Mate-HTC-HD2-Barely-There-Cases.asp
Look at the bold print just above the price.
If it is available, please enlighten us at where this elusive item is to be purchased.
Hi all, here is a little warning from me and Beards, who purchased the Case-mate barely there silver chrome for out international HD2.
I already returned this case. It was really a bad experience. Although it looks very nice, thin, save the slim design for HD2, unfortunately, it was a nightmare to take the phone out of the case. If you want to take the phone out often, or you are the type that like to change case once a few days like me, or worse if your HD2 crashes or hang and you have to do a soft reset with pen, you really shouldnt buy this case. For the first time I put my phone into the case, and near 10' to take it out, it also nearly scratched all 4 rubber corners of my HD2. If I continue using this case, my beloved HD2 going to be just like the pics in Nightfire123 review, really terrible.
I really recommend not buy this case, if you dont want your lovely HD2 get scratches.
And here is Beard's opinion through our PM:
"When I received my case I was away abroad and it was my daughter who said she thought the case was marvelous.
However, since coming back home and having now tried the case I agree completely, it's an absolute nightmare to take off (only found this out the other day when I had to remove the case from the phone).
Only be grabbing one of the sides and pulling it really hard did I 'eventually' manage to prize it from the phone.
I shan't be returning the case as my daughter threw away all the packaging and it didn't cost a great deal.... I shall however keep the case so that I can use it to experiment against other cases."
U can check this thread from Nightfire123 to see how it will scratch your HD2 after using for a while
http://forum.xda-developers.com/showthread.php?t=642714
fantasytozi said:
Hi all, here is a little warning from me and Beards, who purchased the Case-mate barely there silver chrome for out international HD2.
I already returned this case. It was really a bad experience. Although it looks very nice, thin, save the slim design for HD2, unfortunately, it was a nightmare to take the phone out of the case. If you want to take the phone out often, or you are the type that like to change case once a few days like me, or worse if your HD2 crashes or hang and you have to do a soft reset with pen, you really shouldnt buy this case. For the first time I put my phone into the case, and near 10' to take it out, it also nearly scratched all 4 rubber corners of my HD2. If I continue using this case, my beloved HD2 going to be just like the pics in Nightfire123 review, really terrible.
I really recommend not buy this case, if you dont want your lovely HD2 get scratches.
And here is Beard's opinion through our PM:
"When I received my case I was away abroad and it was my daughter who said she thought the case was marvelous.
However, since coming back home and having now tried the case I agree completely, it's an absolute nightmare to take off (only found this out the other day when I had to remove the case from the phone).
Only be grabbing one of the sides and pulling it really hard did I 'eventually' manage to prize it from the phone.
I shan't be returning the case as my daughter threw away all the packaging and it didn't cost a great deal.... I shall however keep the case so that I can use it to experiment against other cases."
U can check this thread from Nightfire123 to see how it will scratch your HD2 after using for a while
http://forum.xda-developers.com/showthread.php?t=642714
Click to expand...
Click to collapse
Your opinion is exactly what I like to see and I greatly appreciate your input!!! You make a very good point; there is no soft reset access from the front of the device. Also, the memory card is also not accessible. I'm agreeing with you; maybe I don't want this case.....Buuuuuut, if they did make changes for fitting TMOUS HD2, and take customer complaints on the design into account, the new design may be as to improve on the errors of the previous. Hey, I'm an optimist.

[Q] Is the Dot View case worth it?

I have been reading mixed reviews about the case and it's fairly expensive over in Egypt so I cannot really decide if I should buy it or not, and unfortunately there's no option of trying it beforehand.
One recent user said that it actually created a smudge/scratched his screen and that kind of scares me because I just bought the phone for a crap load of money and I don't want to scratch it. I have been a M7 user for almost two years and it doesn't have a single scratch on it. The reason I am hesitant about the Dot View is because it's a flip case and even though I bought the HTC Double Dip Flip case for M7 when I first got it with excitement, I ended up ditching it for a normal back cover about a week later because it's a pain as a daily-driver.
My M8 came with a cover inside the box (which I am assuming is standard with any M8) and it actually does a decent job but I am not a fan of rubber-feel cases and I prefer plastic ones. The only problem with back covers is that when my M7 accidentally fell of the table last week, its screen got shattered and I was very upset about it. I am pretty sure if I had the Double Dip Flip cover on, that wouldn't have happened.
Any information, thoughts, and advice are much appreciated.
I would say its a personal preference. I got a dot view case just to check it out. It was sort of fun but the novelity wore off pretty fast. The big problem with that case is that it offers very little in the way of protection for the phone...and secondly, you can't use it with a glass screen protector (for the most part) because the case doesn't close fully with the glass installed. Also, the phone is a pain to get out of your pocket due to the rubber front, which by the way, will forever attract lint and get all mucked up...All in all it was more of a pain in the end.
I ended up choosing a nice iloome 9H tempered glass screen protector and a Spigen Slim Armor case and its a fantastic match of good looks and protection.
Here are a couple of links if it helps you...best of luck with your new M8. You're going to love it.
http://www.amazon.com/iloome-ScreenMate-Tempered-Protector-Oleophobic/dp/B00ADT25ZG
http://www.amazon.com/Spigen%C2%AE-CUSHION-Protective-Smooth-Cushioned/dp/B00IF5B49S
Thank you for your reply. That case looks rather impressive. I actually forgot to install a screen protector, thank you for reminding me, I'll be doing that tomorrow. I'll see if I can find that case locally, if not I'll see if I can order it online - I am not sure if they ship to Egypt, though, because most sellers on Amazon don't. Thanks again!
EDIT: I found one but I am not sure if it's the same as the one you linked: http://egypt.souq.com/eg-en/slim-ar...rotector-for-htc-one-m8-black-grey-7066001/i/
http://egypt.souq.com/eg-en/slim-ar...een-protector-for-htc-one-m8-black-7066006/i/
It looks rather similar, though, and the price is fair. I think I'll be placing an order.
TarekElsakka said:
Thank you for your reply. That case looks rather impressive. I actually forgot to install a screen protector, thank you for reminding me, I'll be doing that tomorrow. I'll see if I can find that case locally, if not I'll see if I can order it online - I am not sure if they ship to Egypt, though, because most sellers on Amazon don't. Thanks again!
EDIT: I found one but I am not sure if it's the same as the one you linked: http://egypt.souq.com/eg-en/slim-ar...rotector-for-htc-one-m8-black-grey-7066001/i/
http://egypt.souq.com/eg-en/slim-ar...een-protector-for-htc-one-m8-black-7066006/i/
It looks rather similar, though, and the price is fair. I think I'll be placing an order.
Click to expand...
Click to collapse
I own one, and I have a love/hate relationship with it.
First thing first: The case is extremely attractive: everybody will ask you for it, and you can show it off to all your friends (mines are all in love with my phone just for the Dot View Case)
the fact that you can answer / hang the phone without opening the flip is very useful
The Bad: Typing with the case open is a real pain. There are occasions (when sending long text messages) that I found Myself removing the case, typing quickly the msg and putting the case back on.
the way the flip is designed makes it constantly trying to keeps its closed state. so if you are using the phone one handed you will find yourself constantly struggling with the case to keep it open
That's exactly why I hated the M7's double dip flip cover.. it just made typing with two hands a hassle, let alone with only one.
TarekElsakka said:
I have been reading mixed reviews about the case and it's fairly expensive over in Egypt so I cannot really decide if I should buy it or not, and unfortunately there's no option of trying it beforehand.
One recent user said that it actually created a smudge/scratched his screen and that kind of scares me because I just bought the phone for a crap load of money and I don't want to scratch it. I have been a M7 user for almost two years and it doesn't have a single scratch on it. The reason I am hesitant about the Dot View is because it's a flip case and even though I bought the HTC Double Dip Flip case for M7 when I first got it with excitement, I ended up ditching it for a normal back cover about a week later because it's a pain as a daily-driver.
My M8 came with a cover inside the box (which I am assuming is standard with any M8) and it actually does a decent job but I am not a fan of rubber-feel cases and I prefer plastic ones. The only problem with back covers is that when my M7 accidentally fell of the table last week, its screen got shattered and I was very upset about it. I am pretty sure if I had the Double Dip Flip cover on, that wouldn't have happened.
Any information, thoughts, and advice are much appreciated.
Click to expand...
Click to collapse
I've never been one for cases on my phones, especially a phone as attractive as the M8. Having said that however I did get a dot view case as a part of a bundle when I got the M8 and I do find myself using the case most of the time. The reason is the case, in addition to being protective, is also functional. The M8 without a case is so smooth and slick (in every sense of the word) that I'm sure that I would have dropped by now if I wasn't using the dot-view case.

Categories

Resources