I recently switched from fresh 1.1 to fresh 2.0b and also the new radio flipz came out with. I love it and I cant wait for all the bugs to be out. I do have a kinda serious problem tho and need the advice of a droid/linux guru. Why is my usb connection not working anymore. I tried it on 3 cpus and no recognization. Also I used the dev tools and it says everythings fine. Some other things I have done is wiped->flashed etc. no luck and also installed the drivers. nothin. On a side note it does charge! thanks alot any advice would help!!!
When you say your USB doesn't work, what exactly do you mean? Do you mean that your device is no longer recognized?
If that is the case, try this (also, make sure usb debugging is enabled):
I have win 7 64 and here is what worked for me:
1. Uninstall HTC Driver (this will likely give you an error, you can ignore it)
2. Uninstall HTC Sync
3. Download and install PdaNet
4. Follow the directions when installing PdaNet
Yea basically the phone is connected cia usb cable. by using the app" dev tools" i can tell the phone and computer are communicating with each other but no notification by windows or phone and they will not Activsync, htc sync, or mount. Also if you boot to recovery it will add files. really odd but it seems to be a problem with alot of ppl. Preciate it im trying what u said right now I will post with results.
pjung1 said:
Yea basically the phone is connected cia usb cable. by using the app" dev tools" i can tell the phone and computer are communicating with each other but no notification by windows or phone and they will not Activsync, htc sync, or mount. Also if you boot to recovery it will add files. really odd but it seems to be a problem with alot of ppl. Preciate it im trying what u said right now I will post with results.
Click to expand...
Click to collapse
turn on USB debugging
USB debugging is most definitley on. I double triple check it every time. The uninstallation of htc sync and driver and the install of the pdanet did not work everything was fine until 2.1 and the radio. But I did wipe and reflash a second time
bump still strugglin comin guys someone has to have the answer
well the radio should have NOTHING to do with connecting via usb... try nand-ing back to a 1.5 and see if you can connect through adb again.. my $0.02
I have the same problem and I am using damage 1.0...The problem is that it no longer gives me any options when i plug in to my computer. I have been working on this for a few days, it really sucks cuz i don't have any other roms on my memcard so I am kinda screwed if I can't figure this out...maybe i will just wipe and start over. I am 100% sure this is not related to the radio whatsoever. Does anyone know how to change the default for when u plug into a computer...i have tried just going to settings/connect to pc. Ask me is checked, and disk drive is default. I am wondering if there is a default to clear in apps management.
bee976 said:
I have the same problem and I am using damage 1.0...The problem is that it no longer gives me any options when i plug in to my computer. I have been working on this for a few days, it really sucks cuz i don't have any other roms on my memcard so I am kinda screwed if I can't figure this out...maybe i will just wipe and start over. I am 100% sure this is not related to the radio whatsoever. Does anyone know how to change the default for when u plug into a computer...i have tried just going to settings/connect to pc. Ask me is checked, and disk drive is default. I am wondering if there is a default to clear in apps management.
Click to expand...
Click to collapse
Got it.
Go to Settings > Connect to PC
Choose away
pjung1 said:
I recently switched from fresh 1.1 to fresh 2.0b and also the new radio flipz came out with. I love it and I cant wait for all the bugs to be out. I do have a kinda serious problem tho and need the advice of a droid/linux guru. Why is my usb connection not working anymore. I tried it on 3 cpus and no recognization. Also I used the dev tools and it says everythings fine. Some other things I have done is wiped->flashed etc. no luck and also installed the drivers. nothin. On a side note it does charge! thanks alot any advice would help!!!
Click to expand...
Click to collapse
well if you are using disk drive you need to use usb ports build into the mobo. idk why but any usb that is not built in will give you problems. even on my laptop the usb ports that are plugged into the mobo dont work but the ones built in do. try that.
Avalaunchmods said:
well if you are using disk drive you need to use usb ports build into the mobo. idk why but any usb that is not built in will give you problems. even on my laptop the usb ports that are plugged into the mobo dont work but the ones built in do. try that.
Click to expand...
Click to collapse
I am not sure what u mean by mobo? but it worked on the same usb's when i first flashed, i typically use the exact same usb for everything...i have 4 ports built into my laptop and none of them work for the phone. i even tried reinstalling drivers and htc sync...idk, i just wiped, and then restored and still no go, i guess i will try a wipe w/o restore.
If you're on a desktop, he means plug the cable into the USB ports on the back of the computer chassis. The USB ports there are soldered directly onto the motherboard, where as USB ports on the computer chassis are connected by a cable to the USB headers on the motherboard. What he's saying is that the cable could've been damaged/fried/came loose, so try the ones in the back.
mrinehart93 said:
If you're on a desktop, he means plug the cable into the USB ports on the back of the computer chassis. The USB ports there are soldered directly onto the motherboard, where as USB ports on the computer chassis are connected by a cable to the USB headers on the motherboard. What he's saying is that the cable could've been damaged/fried/came loose, so try the ones in the back.
Click to expand...
Click to collapse
OiC, that isn't the problem I have tried multiple ports on all of my computers(all laptops) as well as multiple cords...idk FML, just reflashed will see if it works.
ok so i just wiped and reflashed, now i am stuck at the X loading screen and the phone is frozen...FML, is it bricked, i can still get into recovery, i have the old fresh 1.1 ROM on my card, should i just flash that, or should i just use the nandroid backup i made from stock?
ok so flashed back to stock and my computer still won't recognize my phone...any other ideas, it has to be the computer right?
bee976 said:
ok so flashed back to stock and my computer still won't recognize my phone...any other ideas, it has to be the computer right?
Click to expand...
Click to collapse
unless your phone won't charge plugged into the wall (meaning it's your phone), then yes.
Did u check with changing the cord ??
I had a similar problem after upgrading radio & fresh 2.0b. I just changed the USB cable and it worked fine. Even now it doesnt yet work with the earlier cable. Something went wrong in that front, but a diff usb cable did the trick for me. try it out
i have changed 5 cords. have messed with every setting known to man after doing so wiped and reflashed. everything i have used every usb port 1.0 and 2.0 and my phone most definitly charges ( my phones never been so charged) i am a comp prog going on my mis degree im pretty good at this and know my stuff Im just wonndering 2 things is it phone or cpu? reason I keep being so indecisive is because comp will recognize a device when it is in heroc but wont verify its a hero( ive tried all drivers) but phone connected fine b4 2.0 i duno im all out of ideas im gonna try to install the new heroc .6 and hope for the best thanks for the input guys!!!
Related
Just a quick question- I have a Captivate that will charge when plugged in via USB but there is no data connection. The phone doesnt recognize that its plugged in to a computer, and therefore despite being able to boot into download and recovery mode, I cannot use ODIN to do anything. Clockwork wont work either due being on 2.2.
Ive read some other threads where most concluded it is more or less a hardware failure. Im coming to that conclusion myself, but wanted to check with you guys first. The audio jack did the same thing for a couple days-- it wouldn't work when plugged in. It did come back on its own, though Im not sure why.
Im running Cognition 2.2beta3, and cannot flash back to a stock rom nor to any other rom due to the lack of being able to use ODIN.
Is there any other way to flash back without ODIN? Also, if this is indeed a hardware failure- how can I go about getting it fixed? I traded for it on craigslist for an iPhone 4 so I didnt get it direct from AT&T. It did work for the first couple months.
Thanks in advance for your help!
Do you have USB debugging enabled (Settings-Applications-Development)?
If so, you won't get the connection choice screen when you plug in your USB. You can either disconnect USB debugging to get the choice screen, or leave USB debugging enabled and click on the "Select to copy files" choice in notifications.
I have tried with USB debugging on and off, and in various USB modes. None work, as the Captivate doesnt even acknowledge theres a data connection that has been made.
It worked in the past in all modes... debugging with the option to mount the drive, mass storage, Kies, and the media mode. No dice at the moment. Tried a hard reset today... nothing.
Looks like it could be a hardware issue-- just weird as the audio jack had the same issue and seemed to (randomly) resolve itself. Thanks for the suggestion! Any other ideas?
cmr0385 said:
I have tried with USB debugging on and off, and in various USB modes. None work, as the Captivate doesnt even acknowledge theres a data connection that has been made.
It worked in the past in all modes... debugging with the option to mount the drive, mass storage, Kies, and the media mode. No dice at the moment. Tried a hard reset today... nothing.
Looks like it could be a hardware issue-- just weird as the audio jack had the same issue and seemed to (randomly) resolve itself. Thanks for the suggestion! Any other ideas?
Click to expand...
Click to collapse
I had the exact same issue as you few days ago. One forum member recommended to me to uninstall the Samsung USB driver and reinstalling it again. It worked as soon as I did this. You should give it a try.
I had a similar issue when performing a master clear and flashing JI6. I am on windows 7, and I noticed that a different driver is needed to use Odin in download mode. I had been sideloading apps as well as transferring files with the stock driver from samsung, but my computer still wouldnt recognize the phone when in download mode. The solution was quite simple, when entering download mode my computer gave me the "driver not found" messege. I just let Windows Update find the right one for me (not sure if its generic or not) and everything worked fine after that. Hope this was relevant to your issue.
And I guess you can't do the phone off, open Odin, plug in USB with vol up/down pressed, right?
Not sure if this will help, but I bought a second USB cable to carry in my laptop case. If I use it I can charge the phone but cannot connect it to a PC. If I use the one that came with the phone it works fine.
I have actually tried some other cables and they have issues too. They all have a larger cable housing towards the end that plugs into the phone, where the one that comes with the phone is slimmer.
A friend at work as a Fascinate and he has the same issue, we suspect that the increased size is keeping the usb from connecting all the way in the phone.
Ive tried different computers and different cables, as well as different drivers. Ive used 64bit systems and 32bit systems... XP and Vista.
The phone itself goes into download mode, though I have to go through the terminal and use 'reboot download'. I cant use command line on the computer as it doesnt find the device... the phone never is identified to it. It just charges.
Is there any way to perform the commands that ODIN does without actually using ODIN? If nothing else, Id like to flash back to JF6 and be able to use the OTA updates. At this point, Im stuck till clockwordmod works with 2.2.
I experienced the same thing. My Captivate would charge, but it couldn't connect to any of three computers (WinXP w/drivers, Mac OS X, and Linux) with either of two micro usb cables I had. I would always get a USB error in some form.
I was on cog 2.1, and was able to roll back to the JH7 OTA update without ODIN. Afterward I brought it to an ATT Tech Center and convinced them it was a hardware failure.
I got a warranty replacement, and it didn't work either.
It turned out to be bad micro usb cables. One was the original Samsung cable, but it was loose, there was plenty of play and wiggle in the sockets of both phones.
The best micro usb cable I've found is from a Kindle. It has a a larger plastic base than the stock from Samsung, but critically it has a longer connector. There's a solid click when connected and absolutely no play or wiggle possible. It works every time.
I don't know if you can restore from 2.2 to JH7 without ODIN. Now that we have 2e Recovery on Froyo (in Cog 2.2 BETA6), could you use Clockwork Mod (Rom Manager) to flash designgear's JH7 OTA ROM?
Try some alternate micro USB cables, you might be surprised!
Im having the same issue, was there any resolution to this from the OP??
I suspect hardware also, and Ive got another Micro USB on order from Amazon and will prob buy one from a store tomorrow also.
the stock cable is horrible, I bought a nice charger the other day and it has a nice click and stay, and since I plugged it in to the new charger it no longer shows up on any computer with the stock cable. Im wondering if the new charger with a tad larger connector spread the connectors just a tad too far for the stock cord.
I tried everything as well, I hard rebooted, put into recovery mode and even deleted all my user data to try and see if there was some software that was blinding the computer to the connection... no luck
Ill let you know what I find.
Same issue here. Has anyone had any luck with a new usb cable? Luckily, I can transfer files from my computer via bluetooth for now, but it takes forever!
So I've searched through threads and can't seem to find any solutions. I'm running Axura 2.1CE w/ JK3 kernel. I've used multiple cables, on different computers and none of the computers are able to even detect the device. Any thoughts?
autocorrelation said:
So I've searched through threads and can't seem to find any solutions. I'm running Axura 2.1CE w/ JK3 kernel. I've used multiple cables, on different computers and none of the computers are able to even detect the device. Any thoughts?
Click to expand...
Click to collapse
I had this happen to me a couple of times. One time i just needed to restart my phone, and at least once it was a bad flash and I just had to reflash over and master clear. never had it become a permanent problem.
used2hvatreo said:
I had this happen to me a couple of times. One time i just needed to restart my phone, and at least once it was a bad flash and I just had to reflash over and master clear. never had it become a permanent problem.
Click to expand...
Click to collapse
I've tried rebooting more than once and also it won't connect to ODIN =\
autocorrelation said:
I've tried rebooting more than once and also it won't connect to ODIN =\
Click to expand...
Click to collapse
can you not get into download mode using hardware buttons?
The usb cable that came with the phone is not working for you even after installing the proper samsung usb drivers? What windows OS are you trying on?
Make sure it is a data cable and not a charge only cable. Look at the tag that is on the cable and it should tell you what it is.
Like UpNSmoke said.. make sure your using the correct cables.
It is suggested that if your having issues with a computer recognizing your phone to plug the cable in to the USB Port that is on your Motherboard on your Computer.
I would also suggest that if you haven't already - use the drivers that are in Design Gears ODIN 1 Click Back to Stock (links also provided in the sticky here as well). These are the one's I've been using since I've had my phone - and haven't had any issues.
Another thing you can do is - plug in your phone - and then re-install the drivers while the phone is plugged in.
And lastly.. I seem to have better luck with my Windows 7 box then my work's Windows XP machine. Good luck..
used2hvatreo said:
can you not get into download mode using hardware buttons?
Click to expand...
Click to collapse
I've put it into download mode, though nothing comes up
upNsmokeAllDay said:
The usb cable that came with the phone is not working for you even after installing the proper samsung usb drivers? What windows OS are you trying on?
Click to expand...
Click to collapse
The cable I used was the one that came with the phone, what's odd is that I've never had this problem until earlier this week. I've tested it on Win7 x64 and Win7 x86
avgjoegeek said:
Like UpNSmoke said.. make sure your using the correct cables.
It is suggested that if your having issues with a computer recognizing your phone to plug the cable in to the USB Port that is on your Motherboard on your Computer.
I would also suggest that if you haven't already - use the drivers that are in Design Gears ODIN 1 Click Back to Stock (links also provided in the sticky here as well). These are the one's I've been using since I've had my phone - and haven't had any issues.
Another thing you can do is - plug in your phone - and then re-install the drivers while the phone is plugged in.
And lastly.. I seem to have better luck with my Windows 7 box then my work's Windows XP machine. Good luck..
Click to expand...
Click to collapse
Tried ODIN 1-click and every machine I've run it on is windows 7.
I haven't had any luck getting a decent connection to my phone yet either. I've tried several different drivers, x86 and x64, different versions of each. Different versions of Kies and Kies Mini. I've tried suggestions from online. Nothing has gotten me anything reliable. I almost forgot, I've tried 2 different phones also. It would be one thing if it just NEVER worked, but for it to work sometimes and other times not, mostly not, is frustrating. I'm afraid to try a new ROM since everything I see about unbricking a Captivate requires a USB connection.
You definitely need to have to have a working USB connection before flashing... and plus you need it to return to stock using ODIN.
Have you tried re-installing the drivers with the phone plugged in and no dice?
I've tried plugged in, not plugged in. USB hub, USB motherboard connection. Just about everything I've seen online I've tried. Some don't work at all and others work briefly but usually within a day refuse to work more than it does work.
Ive tried uninstalling and reinstalling drivers, changed ports, changing computers, USB debugging. everything, whats wrong?
I had similar problems, and did a system restore on my Windows 7 64 computer. Some updates didn't allow the phone to mount.
I'm not saying this is your case, but it's worth a shot.
kant5t1km3 said:
Ive tried uninstalling and reinstalling drivers, changed ports, changing computers, USB debugging. everything, whats wrong?
Click to expand...
Click to collapse
A little more info would help. What is your PC specs? There are some known issues on Win7-64.
ya i have Windows 7 64 bit
Its Win7 64 I had similar trouble
first try right click Mini Kies run as Administrator, then plug in phone when Kies says to, Windows will recognize it if it has the usb drivers if not it will look for them and will install, then try again ..good luck
it worked not what. my phone doesnt show to "Mount".
You are in debugging mode, right?
rwj5279955 said:
You are in debugging mode, right?
Click to expand...
Click to collapse
ya, i am and i dont know what to do.
Now work shows the icon on my phone but it freezes when i click on it and i have to battery pull to get it back to normal.
Are you on a custom rom or stock? If custom, which rom?
i am on firefly 2.5
Hmm... Well its not the rom. Firefly 2.5 works fine for that. Any chance you've tried a different usb cable? Didn't see that in the op. Could be a bad pin/wire in the usb cable itself or on the connectors.
Also, no dirt/debris in the usb connection on the phone itself right?
Just to be clear the phone will charge when the usb is connected as well correct?
ya ive tried different cables, computers, roms everything i went into recovery with the usb plugged in and clicked mount usb and it works then but i dont want to do that every time.
still doesn't work after a few days
http://forum.xda-developers.com/showthread.php?t=993391
Here's how I fixed mine. Hope it helps.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
thanks ill try it after school
Johnnie5000 said:
Hmm... Well its not the rom. Firefly 2.5 works fine for that. Any chance you've tried a different usb cable? Didn't see that in the op. Could be a bad pin/wire in the usb cable itself or on the connectors.
Also, no dirt/debris in the usb connection on the phone itself right?
Just to be clear the phone will charge when the usb is connected as well correct?
Click to expand...
Click to collapse
I had a cable issue when I first got my Captivate, and it was incredibly aggravating diagnosing the problem. The trouble was that with my USB cable the phone would charge just fine, but the computer would not recognize it. I assumed it was the phone or drivers--since the cable seemed good. At that point I didn't realize how precise the voltage has to be and stuff for the computer to recognize the phone. I tried my wife's cable, and everything worked fine, so I brought my cable back and AT&T gave me a new one. Not that this story helps you at all since you already tried a different cable...
stinkynoon said:
I had a cable issue when I first got my Captivate, and it was incredibly aggravating diagnosing the problem. The trouble was that with my USB cable the phone would charge just fine, but the computer would not recognize it. I assumed it was the phone or drivers--since the cable seemed good. At that point I didn't realize how precise the voltage has to be and stuff for the computer to recognize the phone. I tried my wife's cable, and everything worked fine, so I brought my cable back and AT&T gave me a new one. Not that this story helps you at all since you already tried a different cable...
Click to expand...
Click to collapse
ya thats exactly whats happening but i have two different cables and they both dont work
Is it all possible to swap cords with an AT&T store? I'm sure it's unlikely that both cords are fruity...but it'd be worth a try if possible.
xwiljar said:
http://forum.xda-developers.com/showthread.php?t=993391
Here's how I fixed mine. Hope it helps.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
well I have the same issue but I'm running linux ubuntu. I don't think it is a cables fault it must be the phone or ROM.
Sent from my SAMSUNG-SGH-I897 using XDA App
I've been having USB driver issues for a while now with my captivate (On serendipity 4.2 right now, finally decided to try to get to the root of this issue and update); I've used the SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe (and I am on 32 bit Windows XP SP3), and have always received a "USB Device has malfunctioned" message whenever I have tried to plug my Captivate in.
My computer has 2 USB Ports; one of them has a USB 1.0 hub plugged in (which has a keyboard & Plantronics Microphone plugged in as well) and the other has a Logitech mouse. I've tried both of the main USB ports, as well as the hub. The hub's been plugged in when installing and uninstalling (I'm trying to give as many details as possible in the hopes that one of these might trigger a red flag).
Anybody know what the problem might be? Maybe I've been uninstalling the drivers incorrectly? (I've done it through device manager & restarting the computer before reinstalling)
EDIT: No Kies on this computer, has never been installed; I have been mounting the device via the notifications menu but it still gives me a malfunction error.
Hmmm.. You've done everything that I would try as well...
At this stage I can't really say it's anything specific... Have you tried it on any other computers by any chance? Or got it working before?
venomio said:
Hmmm.. You've done everything that I would try as well...
At this stage I can't really say it's anything specific... Have you tried it on any other computers by any chance? Or got it working before?
Click to expand...
Click to collapse
Should mention that I got it working by turning on USB Debugging mode on after installing the drivers, then plugging the device in, and after that it began to function as normally.
So is it working now or not? Sorry, the latest post is a bit confusing...
I think that's a known issue. I usually can not get my computer to recognize my captivate without enabling debugging
Sent from my SGH-I897 using XDA App
venomio said:
So is it working now or not? Sorry, the latest post is a bit confusing...
Click to expand...
Click to collapse
Yes, it is working 100% as it should be.
Hey all,
Recently I have gotten need to RUU my phone. It has a custom hboot 1.56, S-OFF, and is running CM11. My problem is that my computer will not recognize my phone whatsoever. In fact, it doesn't even show up in Device Manager OR the "Safely Remove Hardware" icon in the task bar. USB Debugging is enabled on my phone, and I am using the adb binary from the RUU package.
What's strange is that Windows doesn't even bring up a message to try and install drivers or anything... it acts as if nothing was ever plugged in. On my phone, nothing happens except it begins charging. Not even a USB storage popup or anything.
I'm not really in a location right now where I can test out another computer to try that, nor do I have a spare cable handy at the moment. Has anyone ever had the problem I've having, and if so, what was causing the problem/fixed the problem? I'm thinking it's the cable, but I'm not really sure since it CAN charge the phone.
Thoughts?
mrinehart93 said:
Hey all,
Recently I have gotten need to RUU my phone. It has a custom hboot 1.56, S-OFF, and is running CM11. My problem is that my computer will not recognize my phone whatsoever. In fact, it doesn't even show up in Device Manager OR the "Safely Remove Hardware" icon in the task bar. USB Debugging is enabled on my phone, and I am using the adb binary from the RUU package.
What's strange is that Windows doesn't even bring up a message to try and install drivers or anything... it acts as if nothing was ever plugged in. On my phone, nothing happens except it begins charging. Not even a USB storage popup or anything.
I'm not really in a location right now where I can test out another computer to try that, nor do I have a spare cable handy at the moment. Has anyone ever had the problem I've having, and if so, what was causing the problem/fixed the problem? I'm thinking it's the cable, but I'm not really sure since it CAN charge the phone.
Thoughts?
Click to expand...
Click to collapse
It's probably the cable. I had to install CM on a Tab 2 for my friend and his cable didn't work, only charged, so I had to get another cable, which worked fine.
StormyNight said:
It's probably the cable. I had to install CM on a Tab 2 for my friend and his cable didn't work, only charged, so I had to get another cable, which worked fine.
Click to expand...
Click to collapse
I ended up trying a friends cable and everything worked perfectly. Time to get a new cable now...