I have the Htc tilt 2 and cannot get the hard-spl unlocker to work no matter what i do. this is really pissing me off
RHOD300 32M SS-BC
SPL-0.07.0000
Can Anyone Help me out!!!!!!!
At what point does it fail? I had to install enablerapinew.cab on windows mobile before running hardspl and then it worked for me. Just unlocked my tilt 2 less than 2 weeks ago.
fails when i press auto flash. i tried putting that thing on my phone but when i tried to run it, my phone just freezes, thanks
Make sure you're not trying to flash the CDMA version. Read closely. Use the attachments on Olipro's post, don't go to the htc-unlocks site to get your HardSPL files.
if you have a question about hardspl, you need to ask it in this thread..not start a new one.
http://forum.xda-developers.com/showthread.php?t=550131
Related
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
RockGod117 said:
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
Click to expand...
Click to collapse
I don't think you'll get much help here as this is the WIZA100 & WIZA200 forum, not the HERM300...
RockGod117 said:
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
Click to expand...
Click to collapse
You say that your device is still able to enter bootloader...? If this is correct then you do not have a brick. I understand that you do not have a Wizard, but a Hermes.
This is what you need to do:
Download the Hermes Official WM5 T-Mobile Rom
Put your Hermes in bootloader mode
Connect to your PC via USB
Run the ruu_hermes_tmhu_1.21.116.4_1.05.02.00_wwe_ship.exe that you just downloaded and you should have a working Hermes again.
Next time you want to upgrade your phone, you will want to read into what you are doing VERY extensively. You will find volumes of information under the Hermes sub-forum or in the WIKI under Hermes.
Good luck. Post back here if this was helpful just so I know I didn't waste my time.(thanks)
Non-Free Way to Unbrick
I bought one of these that was bricked one time. (for super cheap). After hours of trying stuff I broke down and paid $30 at imei-check.co.uk They sim unlock and CID unlock all at once. The result was an UNBRICKED phone. I still sold it and made about $100 profit. I think an HTC employee with insider info runs the site. Good luck.
Hey Chaps,
Just thought earlier today i'd have a go at upgrading my phone with the new HTC firmware for my Vodafone Kaiser. First i tried it on it's own only to find the 'vendor' had blocked the upgrade, then i ran the HARDSPL software, when it rebooted my phone to the tri-colour screen i stopped pressing enter on the batch file and ran the HTC upgrade again! ... success - sort of; the upgrade got to 15% and stopped with a connection error (my usb's dodgy i think), then when the phone rebooted to the tri-colour boot loader it'd a) no longer accept the HTC Rom (vendor thing again) and b) become irritatingly broken.
Is it possible to flash an older vodafone rom to the device? if so, where can i find such a beast. Or does anyone know of any devilish ways to put the new rom on using the bog standard bootloader?
Thanks in advance big time to any clever phone experts who can de-brick my... er... brick
Dan.
your supposed to install hardspl before upgrading it if you try it on its own it will brick it at least thats what i heard from the stickies
azazelx, he has hardSPL installed, anyway.
@JimmyJangle: flash via microSD card. [url="http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash" URL]Read here.[/url]
You need winrar to extract file nbh from the shipped ROM.exe.
Hmm, i don't think i do have HardSPL actually installed,
When i saw the tricolour screen come up with different version information I stopped that batch file that was installing HARDSPL (impatiently) and started the HTC one (which failed at 15%). So now i (think) i have a phone with no firmware and the bootloader says:
KAIS130
SPL-1.56.0000
CPLD=8
I reckon if i can find a vodafone made rom the bootloader'll let me install it.
Any idea where i could find one?
What is ur orginal shipped ROM?
Your solution now is flash back the orginal ROM by using microSD card method I mentioned above, install HardSPL succesfully, then flash whatever ROM you prefer.
Hey Nghiem,
Thanks for the help, that link doesn't go anywhere though.
Also, wouldn't i need the original rom from somewhere in order to do that?
Thanks,
Dan
where did you buy the phone e.g vodafone, orange, etc...so I can tell you the original ROM? Because you phone CID is not unlock, hence you must flash the back the shippied one.
Get the WM 6.1 Vodaphone official here http://forum.xda-developers.com/showthread.php?t=365058
Hi,
I got the phone from Vodafone in the UK.
It had WM5 on it... erm, that's it.
I've just beem trying to load original voda roms back on to it but it's not happy - i don't know if they really are the originals though, one says 'reconstructed'.
Dan
Actually, that was the rom i tried and it came up with the Vendor ID error.
Dan.
Link on post #6 is the official not reconstructed. How about download directly from Vodafone website? It's strange when you have carrier ID block even with its ROM. Also, try reconstructed ROM listed here http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
Search for mtty, see if it can help you out.
MTTY saved the day!
Only 3 hours of my life lost!
Thanks,
Dan
Cheers. Don't forget to flash HardSPL and read the wiki before doing anything.
Hi All
Owning a Vario III and using Hardspl I upgraded to the latest incarnation of HTC's ROM (WM6.1). Having been caughtout with the freezing issue and after reading some posts about removing Hardspl I began to do so.
After reading the Idiots guide which stated :
'2. Flash the OEM ROM to your device (this will restore your OS but not the bootloader, we'll get to that below)'
I couldnt locate a proper T-mobile Wm6.0 ROM so thought as I'm just getting rid of the Hardspl I'd use the standard HTC ROM WM6.0 which went on fine.
This allowed to rid my phone of the HARDSPL.
I was then getting the Vender ID error when trying to load the new WM6.1 HTC ROM (which of course I would get as HARDSPL had been removed).
I then thought sod it and Ran SSPL-KAIS.exe and then began to run the latest HTC ROM. It started fine but bombed out at 15% and then I was left with a Tri-color screen and the message below :
In the Upper right hand corner it says RUUNBH
On the left side a little lower it says
KAIS1*0
SPL-1.56.0000
CPLD-8
At the bottom of the screen if I have USB plugged in it says USB, if nothing is plugged in it says Serial.
I cant seem to run MTTY 1.16 or 1.42 as I'm using Vista and the processes are slightly different (though I stopped what I thought were the relating ones to no affect)
Anyone on this awesome forum got any bright ideas as to how I can resurrect this one ?
btw : if I/we do manage to fix this one, do you think it will be possible to a) have a copy of the OEM T-mobile ROM ?? b) still upgrade to latest Wm6.1 ROM without the need for Hardspl ??
Cheers all
Steve
RUUNBH errors are from incomplete flag clearing after a flash. All that is needed is MTTY, 1.42 is best, & a few commands.
The first command is:
cmd>set 16 0
The second based on what SPL you now have (1.56) is:
cmd>boot
For use with Vista, you'll need to follow the dirsections used to flash via vista, & roll back the USB drivers. Do a search for Flashing with mtty and vista in google.
FANTASTIC !!!
Many many thanks for your prompt help !. Magic.
Im back up and running thanks to you brilliant help .
Do you think its worth trying again to Flash the phone using SSPL-KAIS and the latest HTC ROM ? or do u think I should quit whilst I'm back up and running ?
Alternatively, is there a way for me to sidestep the T-mobile lock without using HardSPL ?
Apologies for the questions, but after reading the many many posts on this, my brain is deffo boggled !!
Big thanks
Steve
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
gazzacbr said:
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
Click to expand...
Click to collapse
To Flash a ROM you'll most likley need Hard SPL
Follow the "Getting Started" Link in my Sig.
If you cannot get WM to boot, you'll need to re-flash your orginal carriers ROM.
Ta
Dave
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
gazzacbr said:
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
Click to expand...
Click to collapse
You shouldn't be using cmonex's SD method the first time round. It is for upgrading only.
I have downloaded the package from point 2 (you should follow the USB method in post 3, NOT the SD set) and have upload it onto my site, please let me know when you are done with it.
http://taeguk.co.uk/xda/HardSPL and CidUnlocker.zip
Ta
Dave
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
gazzacbr said:
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
Click to expand...
Click to collapse
Enter your bootloader and try flashing any ROM supplied by your carrier to get into Windows Mobile.
What screen do you get stuck on? If it is the tri color screen check out the link in my signature.
Ta
Dave
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
gazzacbr said:
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
Click to expand...
Click to collapse
No.
Can your phone boot into Windows or not?
Ta
Dave
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
gazzacbr said:
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
Click to expand...
Click to collapse
Yeah, you need the ROM your carrier supplied.
Where is the Phone from?
Does a Hard Reset help?
Ta
Dave
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
gazzacbr said:
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
Click to expand...
Click to collapse
That's right, flash the HardSPL 3.29 first (SIM unlock is optional, CID unlock isn't needed - Hard SPL takes care of that - but it comes as part of the SIM unlock) then flash a WM6.1 ROM.
Ta
Dave
gazzacbr said:
not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
Click to expand...
Click to collapse
Only if it's from the same region the RUU was intended for eg the European TyTN II's won't accept the latest Hong Kong WWE ROM by default because of this so as already suggested hardSPL works around this. My WM 6.0 UK original TyTN II upgraded to WM 6.1 OK but that was using the HTC UK provided ROM update. That updated everything required including the SPL and Radio to the required HTC versions. I'm back on the original WM 6.0 version though due to reliability issues with 6.1 and poor GPS performance.
Hello,
Iam daniel. My english is not zo good but i will try.
I have flashed my phone with hardspl 3.56.
After that i installed wm6.5 from josh Build 21198
Then i start up my phone and every think look richt.
Then my phone ask for a restart, zo i start up and there was my problem, he doesn't start up.
I see thee first screen with red letters at the bottom and he does nothing.
Can you help me???
Have you tried a hard reset?
Also, did you CID unlock your phone as well? I believe you have to be CID unlocked to flash a 6.5 ROM on your phone.
Had a same matter last day ago, after re-flash, all working fine
I didn't unlock my phone whit cid...
for a hard reset is it the two buttuns (with the lines on it) near the phone buttom?
And a reflash how does that work?
I have no communication with my pc know because he crased in the screen when you starting up. It is the first screen you see when you restart your phone.
Ok, a couple of things... this is the wrong forum to be asking in, and I bet a mod is going to shut this down at some point. You should try posting in the forum for the ROM you flashed.
What you need to do is grab a stock WinMo 6.1 ROM and flash via the SD card method, that should get you up and running again.
Then, you will want to run Olipro's SIM/CID unlocker. What this will do is fully unlock your phone so you can flash any ROM, radio, SPL, any! Be careful, though, since not all ROMs are meant for Kaiser... so make sure you are flashing stuff meant for Kaiser.
Once you run Olipro's unlocker, you will want to re-flash the 3.56HardSPL, then a new radio, then go ahead and start flashing any ROM from the Kaiser section.
WinMo 6.5 ROMs reqiure you to be CID unlocked, and that is why you are stuck where you are.
And yes, you are right with how to do a hard rest.
Thanks! I try this tommorow if it works, if it doesn't work i will post my problem in the forum for rom. But hopfully it works because if cot know a nokia 6500 and i can't without my qwerty