Has anyone been able to acquire a horizontal leather case for a Titan (actually a xv6800) with a 2400mAh extended battery? I ordered one from OrionGadgets.com via Amazon and it does not fit. While the case has elastic on the sides that will eventually stretch enough to fit the phone in, the top strap with the magnetic clasp is not long enough to properly stay in place.
Any help would be apprciated. BTW I am hoping to pay $30 or less.
Thanks
nelson
[email protected]
Body glove makes one that works for the xv6800 with enough room for the extended batteries. Found mine at a kiosk in the mall locally so not sure where to send you to find one.
Ditto. The body glove actually fit my 3500 mAh battery on the 6800.
Is there a case/battery cover (the battery cover is preferred) for the HD2 that has a kickstand besides the extended battery one from HTC? I really don't like the HUGE lump on the back of the phone that the extended battery makes.
u can make by yourself.
http://pocketnow.com/how-to/make-your-own-htc-hd2-kickstand
So I purchased an extended battery but my case doesn't fit with it. It does however fit with the case if I take the battery door off. Is it safe to just use the case as a battery door, or should I look for another case?
ajgates92 said:
So I purchased an extended battery but my case doesn't fit with it. It does however fit with the case if I take the battery door off. Is it safe to just use the case as a battery door, or should I look for another case?
Click to expand...
Click to collapse
Are you using the official droid holster shell? I had the same confusion. It looks like it works properly without the original backing, just with the backing that comes with the holster.
Sent from my XT860 running ICS
I was wondering if anyone has tried using the Seidio Active Extended case with other batteries like the extended Hyperion or Anker batteries? Does the Seidio Extended Battery Cover fit those batteries?
Thanks
After my review of Innocell and Active Extended case, I was asking the same question but never heard back from anybody either. In that review I posted all the dimensions so perhaps someone can confirm?
vectron said:
After my review of Innocell and Active Extended case, I was asking the same question but never heard back from anybody either. In that review I posted all the dimensions so perhaps someone can confirm?
Click to expand...
Click to collapse
I've used the Active Extended with the Anker battery and it fits perfectly. That was before switching to the ZL9300 which does not fit with the Active Extended...
If you put on the back and the battery there is still room to fit thicker batteries. Don't know which ones, but if you press on it, there is some flex and spare room underneath.
Techronico said:
I've used the Active Extended with the Anker battery and it fits perfectly. That was before switching to the ZL9300 which does not fit with the Active Extended...
Click to expand...
Click to collapse
Thanks for that info. Did you use the Anker battery cover or the Seidio battery cover with the Active case?
webdave said:
Thanks for that info. Did you use the Anker battery cover or the Seidio battery cover with the Active case?
Click to expand...
Click to collapse
Good question! You can't get Seidio battery cover without buying Innocell (Seidio's 4500 mAh extended battery). While Active Extended is stand-alone product. I just looked up battery cover picture of Anker and it resembles battery cover of Innocell (continues line instead of like in some other brand where they have a big step in battery cover). So, I assume Anker extended with it's cover will fit Active Extended case. But let's wait for confirmation from Technorico and Chris.
The active case is nice and all, but I've been waiting for their extended convert case. I enjoyed it on my thunderbolt It's much more rugged and hiker friendly.
Hey guys I was wondering if anyone has found a solution for fitting a decent case over these phones with extended batteries. I only found that zerolemon gives a decent case (still not as rugged as I desire, but better than no case!) but I would prefer to go with a extended battery that is not as bulky such as mpj or hyperion. Any suggestions on getting a good case or am I doomed till hyperion or mpj releases one (probably never?).
007shinobi said:
Hey guys I was wondering if anyone has found a solution for fitting a decent case over these phones with extended batteries. I only found that zerolemon gives a decent case (still not as rugged as I desire, but better than no case!) but I would prefer to go with a extended battery that is not as bulky such as mpj or hyperion. Any suggestions on getting a good case or am I doomed till hyperion or mpj releases one (probably never?).
Click to expand...
Click to collapse
I don't think you'll find a magic case that will shrink existing matter into a smaller space. The larger capacity demands a larger battery that is not going to be smaller or form fitting to a phone not initially designed for it. It will have to be bulky by definition.
The zero lemon option at least is boxy and rectangular. The other options are lopsidedly large at the base. I personally am going to add a tpu case over my mpj battery for added grip.
i didnt even realize extended batteries were still made. isn't that too bulky?
waylo said:
I don't think you'll find a magic case that will shrink existing matter into a smaller space. The larger capacity demands a larger battery that is not going to be smaller or form fitting to a phone not initially designed for it. It will have to be bulky by definition.
The zero lemon option at least is boxy and rectangular. The other options are lopsidedly large at the base. I personally am going to add a tpu case over my mpj battery for added grip.
Click to expand...
Click to collapse
What tpu case are you going to add?
007shinobi said:
What tpu case are you going to add?
Click to expand...
Click to collapse
I saw this one:
https://www.amazon.com/gp/aw/d/B00ZAK1GAS/ref=psdcmw_3081461011_t1_B015XBS45I?th=0
and ordered a clone off eBay. Getting here tomorrow, will let you know how it goes. Not willing to use the super slippery back that comes with these extended batteries!
Do you guys think my g4 with a mugen battery and door, could I put one of those metal or hybrid bumpers on this?
Doubt a bumper would work. There is usually at least one part of the new back that alters the dimensions of the edge. The zerolemon one makes the whole thing boxy. The one I linked to above changes the whole lower 3/4th edge.
If you did your own 3d printing of a new back, and only had a pronounced lump in the center, potentially you could.
Case for extended battery
I use an otterbox on my G4 with 6200 ma battery. I leave the phone back off, cut the back out of the otterbox where the battery would hit and then just stretch the rubber over. It tucks into a groove in the front half and works great
I use Hyperion Extended battery and Hyperion TPU Case, and i do modification to add NFC feature on Hyperion
You can see on my attachment. White TPU Case too easy to get dirty
willows said:
I use Hyperion Extended battery and Hyperion TPU Case, and i do modification to add NFC feature on Hyperion
You can see on my attachment. White TPU Case too easy to get dirty
Click to expand...
Click to collapse
Does the Hyperion TPU case have a lip in front of the screen? Any chance you have a pic of the front with the Hyperion TPU case?
007shinobi said:
Does the Hyperion TPU case have a lip in front of the screen? Any chance you have a pic of the front with the Hyperion TPU case?
Click to expand...
Click to collapse
The case I got off ebay which is the same as the Hyperion one does have a lip, thus making the front very similar to many TPU cases.
007shinobi said:
Does the Hyperion TPU case have a lip in front of the screen? Any chance you have a pic of the front with the Hyperion TPU case?
Click to expand...
Click to collapse
You can see the attachment for TPU case in front of the screen
Trnzbldr said:
I use an otterbox on my G4 with 6200 ma battery. I leave the phone back off, cut the back out of the otterbox where the battery would hit and then just stretch the rubber over. It tucks into a groove in the front half and works great
Click to expand...
Click to collapse
Hello! Can you share some picture pls? I'm very curious, I would like something like this...
Zerolemon extended battery 8500MAH http://www.amazon.com/LG-G4-ZeroLem...01181ODJI/ref=cm_cr_arp_d_product_top?ie=UTF8