Database Develop

My htc starts up, but freeze during boot up

First of all i do not know where to post this. I have had a HTC wizard for over a year now. it has been working fine after cooking up wm6 and installing it for 6 months. today when i restartet the phone pulling the battery out and inserting it, the phone starts up, then the blue screen comes and shows ispl etc, then windows image shows, there it stops. i do not know what to do. It has been a while since i did pocket pc modding now, and i have forgotten all about it.
Alexander, [email protected]

Maybe something crashed the OS software.
Hope you have a system backup, or at least PIM backup using ActiveSync because what you need now is a hard reset.
Punching the reset hole (next to IR window) while holding CommManager+VoiceDial, then press "Dial" as prompted.

how do i hard reset my dash/s620?

i have tried hard reset
i have hard reset the phone. i do not have any backup in active sync. and i dont think that matters. because my phone does not connect to activesync since it does not start up. and in the three colored boot mode the phone is not detected by active sync. when i hard reset the phone it just came to the same point and freezed

If you didn't touch the ROM for long time, then it is probably a hardware failure...

lovemy318 said:
how do i hard reset my dash/s620?
Click to expand...
Click to collapse
READ YOUR PHONE MANUAL, and THIS IS NOT DASH FORUM.

hard to believe
First off, thanks for fast responses.
It cant be hardware(Not as a total theory of course) or likely not, because phone was not touched by water, shock, bumb fire or anything. it laid on my desk, worked, laid on my dask more, freezed. and it has been working for 6 months with wm6. is there anyway i can flash something into it. without activesync, but in the three colored boot mode?

Get into bootloader, plug in your usb cord and give it a minute...ON THE TRI-COLORED SCREEN do you see in the bottom corner "USB"??? If yes, you are OK. Get a stock rom such as the Tmo 2.26 and flash that. If you do not see "USB" in the bottom corner then as far as I know, you are fukd.
For more info on issues, read the linky in my siggy. There is valuable info there that may help with other ways to flash a rom.
Good luck.

i see usb
thanks, guess i am not fked then
Only problem is i have forgotten all about this now, and that i am sorry for.
But i have to ask you, as from norway wich stock rom to choose, what is stock rom, and when you say bootloader, is that an expression for the three colored screen or is that a program, that can flash in three colored screen? Thanks, i do not expect an answer on this noob questions, but i would really apreciate answers.

stock rom & bootloader
stock rom is the rom which comes with ur phone while purchasing it.. u can call it base rom..bootloader is tri-coloured screen which is bios for ppc if it gets fked then phone is bricked..next time if u cant boot up, then u can flash ur phone with the help of bootloader...

that was fast
thanks, but i do not think i have the rom that came with my mobile phone:/
and i do not know how to flash from tri colored screen, because all the files i have tried cant detect my phone.
ipl adn spl are 3.08 if that helps anything.

that was fast
is there an app you use to flash from tri colored

there is no need for any app, just connect ur phone to tri-coloured screen..u willl see usb in down left corner.. then ur phone is connected then run RUU utility.. if any problem comes i am online at hotmail... [email protected]

Can you power down? If not, remove battery for 1 seconds, the re-insert. Then press all at once the camera, comm and power buttons (or I believe you can also press the camera and soft reset. It is in the wiki explaining, as are some stock roms. Use any stock rom if you plan on flashing a cooked rom. The Tmo 2.26 is a decent stock rom, there is a 3.08 on the forum somewhere that you can also use. Get a stock rom. Get into the tri-colored bootloader. Look to see if it says usb in the bottom corner. If yes, connect your cable and using the ruu from the stock rom, flash your phone. Once a stock rom is installed follow the directions to cid/sim unlock your phone. Once unlocked, you can flash any cooked rom.
PS- I am assuming you have a G3 phone.
PPS- reading the wiki and the stickies are very helpful. Give them a try.

im sutch a noob
yeh i got same problem... i will try a hard reset but im at school... hope it fixes it... i got imate jasjam... BETTER WORK OR I WILL KILL MY BROTHER 4 STUFFING AROUND WITH MY PHONE

im sutch a noob
gah... it diddent work what do i do now????

Rogers HTC dream not booting into recovery or fastboot help!!!!

heres the scenario i did, i basically did hard spl on my device, it rebooted itself and then nothing is happening further from there. Device boots up all i see is ROGERS and thats it. pressing power and camera button doesnt do anything, pressing power and home button also doesnt do anything. Please help.

did you put the 1.33.2005 spl from the rogers heres your real root thread of the hard spl floating around on all the other rooting threads?

yes thats true i used one of the hard spl from here....but im running out of luck....need assistance please

if your phone will not boot into either bootloader (camera and power) or recovery (home and power) then you have a brick, i hope your phone is still under warranty

I dont know if its still under warranty, coz i didnt get this phone from rogers, i bought it off from someone.......it was a brand new one....so im hoping for some good knews from somewere....

wordlife said:
I dont know if its still under warranty, coz i didnt get this phone from rogers, i bought it off from someone.......it was a brand new one....so im hoping for some good knews from somewere....
Click to expand...
Click to collapse
sorry... but it won't boot using those keypresses then it is a brick...
when you have it plugged up to a computer does it make any kind of sound when the boot screen is on?

it doesnt makes any sound, but somethings does comes in device manager but nothing is listed in there.....i have a feeling its bricked but hoping there should be some way to get in n fix this

Problem just arrived

I was trying to load up my gf's G1 and I had a cyans newest rom and pretty much all was working good. Now my friend decided to try the boot screen flasher to load a custom boot image and well it was not working so he said that it was the SPL and I told him that not to worry about it...But he did it anyway and now when the phone loads it stays on the G1 screen. I tried to load into recovery (home+power) to see if I could nandroid but no dice. Any Ideas...I would like this to work by time she gets home as I am creating a playboy theme for her phone.
P.S. I decided to let my friend know not to touch my phones by a nice punch in the arm
P.P.S. I know I should search for this but I am time crunching thanks to my friend and need to get this working again for her ASAP

I would give him a little more than a punch.... if he flashed the SPL
and you cant get to the SPL (Cam+Power) or recovery (Home+Power)
then your phone is bricked....
just so you know... the boot screen flasher has two options..one for the standard/engineering/hardspl and another for the haykuro SPL

Yeah When I do camera power I still get the G1 screen

Sorry but this is a brick. Not fixable.
Try not to actually kill your friend, but he definitely deserves a serious beating.
There is one thing that's worked on a few magics/sapphires, but I don't think anyone's had it work on a g1.. you might as well give it a try since it's literally your only shot: You need to have fastboot drivers already installed and working on your pc and a copy of the engineering or hardspl.. plug your phone in by usb but don't switch it on and execute this command:
Code:
fastboot flash hboot hboot.img
You should get the message "Waiting for device...", now hold [camera] power the phone on and hope. If it doesnt work, try pulling and reinserting the battery a few times. The idea is to get fastboot to recognise the phone before it trips up and start the flash, but as I said I don't know if this has ever worked on a g1. It has been reported that this is more likely to work with linux than windows as it reacts to usb devices much more quickly.

goldenarmZ said:
Sorry but this is a brick. Not fixable.
Try not to actually kill your friend, but he definitely deserves a serious beating.
There is one thing that's worked on a few magics/sapphires, but I don't think anyone's had it work on a g1.. you might as well give it a try since it's literally your only shot: You need to have fastboot drivers already installed and working on your pc and a copy of the haykuro spl.. plug your phone in by usb but don't switch it on and execute this command:
Code:
fastboot flash hboot hboot.img
You should get the message "Waiting for device...", now hold [camera] power the phone on and hope. If it doesnt work, try pulling and reinserting the battery a few times. The idea is to get fastboot to recognise the phone before it trips up and start the flash, but as I said I don't know if this has ever worked on a g1. It has been reported that this is more likely to work with linux than windows as it reacts to usb devices much more quickly.
Click to expand...
Click to collapse
fastboot only works in the spl though. the radio never calls the spl if the radios outdated.
also, why would you want to send haykuros spl back on the phone, when thats what caused it to brick in the first place.
can you link me to where the magic people got it to work? because i doubt their brick is the same as this

B-man007 said:
fastboot only works in the spl though. the radio never calls the spl if the radios outdated.
also, why would you want to send haykuros spl back on the phone, when thats what caused it to brick in the first place.
can you link me to where the magic people got it to work? because i doubt their brick is the same as this
Click to expand...
Click to collapse
to the first part of your statement: thats our best guess but noone REALLY knows, so if you dont want off the wall, maybe fix your phone solutions, then go else where
and i do agree that using HARDSPL versus haykuro would prolly be better idea, but its worth a shot nonetheless, depends all on where the fastboot code exisits and where exactly the phones hang, if you have some specific details that the rest of us are missing then do SHARE
and from what ive heard you'll need to be running linux for the reasons above (windows being slow as balls to do anything, and "security" {hostility} protocols applied to the usb bus)

B-man007 said:
fastboot only works in the spl though. the radio never calls the spl if the radios outdated.
also, why would you want to send haykuros spl back on the phone, when thats what caused it to brick in the first place.
can you link me to where the magic people got it to work? because i doubt their brick is the same as this
Click to expand...
Click to collapse
That's what I thought til I saw this thread too, but the magics were spl bricks or I wouldn't have even posted it You're right tho, I meant to recommend hardspl, not haykuro's.. slip of the fingers. I've edited the post.
I'll try to find the magic thread again.. I can't quite remember where it was though..

ESKIMOn00b said:
to the first part of your statement: thats our best guess but noone REALLY knows, so if you dont want off the wall, maybe fix your phone solutions, then go else where
and i do agree that using HARDSPL versus haykuro would prolly be better idea, but its worth a shot nonetheless, depends all on where the fastboot code exisits and where exactly the phones hang, if you have some specific details that the rest of us are missing then do SHARE
and from what ive heard you'll need to be running linux for the reasons above (windows being slow as balls to do anything, and "security" {hostility} protocols applied to the usb bus)
Click to expand...
Click to collapse
what do you mean by no one already knows? We do know. i dont think youve been following xda very closely.
read the the threads that relate to the spl because all that info is already shared. Heres the summary
IPL>SPL>Android
when the link from IPL>SPL is broken.... there is nothing
Fastboot is on the SPL.
Its not "the rest of us" that don't know this....its just you
@Golden
Im surprised that hasnt been looked at yet. However..the spl bricks are probably very different from the ones on the G1
reason being is that Magic users are using Magic radios and Magic SPLs
These G1 bricks are from using G1 Radio and ported Magic SPL's
Technically, any magic radio should be compatible any magic spl
their bricks would easier to fix as the proper software is probably still on there while g1 may or may not recognize the software such as the magic spl

T-mobile G1(Dream110)-bricked : HELP :o)

Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )

MiTMaNeK said:
Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )
Click to expand...
Click to collapse
I can help, but need more info. Tell me about the process you used to root and flash.
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?

I can help, but need more info. Tell me about the process you used to root and flash.
Click to expand...
Click to collapse
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?
Click to expand...
Click to collapse
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.

MiTMaNeK said:
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.
Click to expand...
Click to collapse
I am guessing they flashed Haykuro's special (i.e. danger or death spl) since they wanted an eclair ROM. Furthermore, I am guessing they did not flash the updated radio before the SPL?
Either way, since nothing happens when holding home, or camera, I am sorry to say you have a brick.

Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D

MiTMaNeK said:
Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D
Click to expand...
Click to collapse
As of yet your options are to send it to HTC to have it fixed, replace the motherboard, or follow this thread
http://forum.xda-developers.com/showthread.php?t=591048
Maybe these guys will figure it out.

Thx for this link, Its last hope for my friends G1 =), or buy used broken G1 with good motherboard =)

In all the cases I've read about if you can't access bootloader and recovery then your phone is bricked for good, but if you can access at least one of them your phone can still be fixed

Its fully bricked. So Power+ Cam and Power + Home dont work, maybe they found the way how to repair it )

G1 Bricked (Not able to fastboot)

Hi everyone really sorry for opening a new thread for a G1 brick.
My G1 has stuck at the T-Mobile screen and on pressing Camera+Power i cant get into fastboot to restore using the .nbh file.
I am not able to get into recovery using power+home key also.
There has to be a way to get my dream back....
please please please help

JTAG or go for a replacement. I'm guessing it's a DangerSPL brick, right?

Danger SPL
Yes dude....
i have done this so many time.....
this time i forgot to update the radio first and this is stuck....
Someone should have a solution for this....
I read many thread which say use it as a paperweight...
I am not loosing hope....
XDA Member will have some solution.....

Maybe you should try to keep current on developments.
There is NOT A SINGLE REASON to use the deathspl.
As for your "poll"... what do you expect to learn from something like this? Do you realize that any numbers you get will be completely MEANINGLESS?

lbcoder said:
Maybe you should try to keep current on developments.
There is NOT A SINGLE REASON to use the deathspl.
As for your "poll"... what do you expect to learn from something like this? Do you realize that any numbers you get will be completely MEANINGLESS?
Click to expand...
Click to collapse
By adding the poll I am just trying to avoid post which says hey even i have the same problem.
I was upgrading to cm 5 which needs deathspl.

chinmayfun said:
I was upgrading to cm 5 which needs deathspl.
Click to expand...
Click to collapse
Aaaaannnnnd.... it doesn't need it
http://forum.xda-developers.com/showthread.php?t=704560

lbcoder said:
There is NOT A SINGLE REASON to use the deathspl.
Click to expand...
Click to collapse
Sure there is as its one if the few full engineering spls. And I don't think your latest development will ever be quite as user friendly (however some more configuration it will be very close)
The real user friendly fix/patch for 1.33.2005 (those that know what they are doing can decide if any benifit of the spl exists) is an assertion statement in the recovery script to check the radio version is not one of the two common 1.x ones.
(the evil patch is to make the assertion somehow also autoinstall the lattest Rogers e911 patched rom if the user has the 1.x radio. Because atm the rogers rom appears to be very safe from the user messing up the boot chain.. actually we may need to "perfect" the spl a bit more I think it will let us erase hboot)

I am still a newb to the android scene - and do believe I as well made the same mistake - and have bricked my G1.
If eveything I've read is accurate, I can purchase a donor phone - broken screen, or other issues - so long as the mother board is still good.
Swap out the new mother board for the bricked one, and have a working phone again - right ?
Have an opportunity on a donor phone - have no issues pulling phones apart, and putting them back together
But just want to make sure I understand the basics
Thanks in advance for any replies

Motherboard only option ?
Is replacing the motherboard the only option left ?
I am not sure i would be able to do that
Worst day of my life i screwed up big time
Any help is appreciated.
Some tool to recover back to original.
I can understand there is no way to repair as I am not able to get into recovery nor fastboot so cant adb also...

youtube
i checked the below video bt this is kinda a complicated and nt a solution for me

chinmayfun said:
i checked the below video bt this is kinda a complicated and nt a solution for me
Click to expand...
Click to collapse
There is no tool to get it back except by the options listed above. If you are not going to switch the mobos in the G1 then you won't be able to do the other option either. There is no software that can bring your G1 back after a deathspl.

protomanez said:
There is no tool to get it back except by the options listed above. If you are not going to switch the mobos in the G1 then you won't be able to do the other option either. There is no software that can bring your G1 back after a deathspl.
Click to expand...
Click to collapse
Thanks....
i will have to plan out on buying a new android....
had waited for a long time to get tht android phone from a friend in usa....
now there are many android phones available in india.... will have to start saving some money.... cant live without an android....

hey,
i had the same prob.
only thing,
mine bricke in cause of a radio update,
i tried all which was in my head,
and all i can do
but after some nights spending to my phone i found this:
i copied my nand backup to root of sd,
and connected it to pc
first he told me, device not known
so i tried to boot the modified recovery,
and *tada* i was in recovery mode,
plz try and tell me if it fix your problem,
for mine it did
best regards,
psycho

Mine is also due to radio update dude, before flashing spl the radio has to be flashed i and forgot to do that.
Will try out your suggestion, just hoping that it work and my g1 is back to life.
Ne ways appreciate your suggestion.
Please let me know if you were able to get into recovery mode prior to putting the files on the sd card.
And if you could tell me the list of files (if u had nething other then the nand update) which you put on the sd card, i can replicate the exact process.
Thanks,
Chinmay

Hope
Is there any hope to get the G1 back to life from the Death SPL Brick ?

You should read instructions carefully man. Its not that hard. You should always verify that you have a compatible radio before flashing DangerSPL.
There is a method to recover your device and it involves a lot of time and patience. Google "JTAG".
Sent from my HTC Dream using XDA App

"JTAG".
me too, my G1 Bricked (Not able to fastboot). but i wanna know if the JTAG method work 100%.please.