Database Develop

Getting tired of this, please help on 3g :(

Hi all, i have searched for this problem and nothing
When i try to make a video call, says allways the 3g ins not avaliable
What i need to do? need help please! :/

P4k1t0 said:
Hi all, i have searched for this problem and nothing
When i try to make a video call, says allways the 3g ins not avaliable
What i need to do? need help please! :/
Click to expand...
Click to collapse
For video calling u have to be in 3G coverage are. Do u have 3G icon in the upper bar of you screen?

No it doesnt appears the icon of 3g
When i do a reset on my pda, the 3 first seconds the pda is in 3g mode and after that the pda goes for G only
Can you help-me please?

P4k1t0 said:
No it doesnt appears the icon of 3g
When i do a reset on my pda, the 3 first seconds the pda is in 3g mode and after that the pda goes for G only
Can you help-me please?
Click to expand...
Click to collapse
Did you go into comm manager to make sure 3G is turned on? It appears you are using Dutty's rom, and as such should have posted this question in there. Anyone who could help you would have seen it in there. and then we wouldn't be frustrated that you created a new thread for this. Which is against the SOP around here.

YEs the 3G is turned ON, and i'm using Duttys rom! :/
Can someone help-me? I have searched a bit and dont have found anything

P4k1t0 said:
YEs the 3G is turned ON, and i'm using Duttys rom! :/
Can someone help-me? I have searched a bit and dont have found anything
Click to expand...
Click to collapse
Well i'm not sure what else would cause you not to get 3G, except maybe a hardware defect, if you changed the band, or perhaps there is no 3G in your area.

To answer your question, if it stays 3G for a couple seconds and goes to G that definately means you DON'T have 3G in your area.
Kraize

Kraize92 said:
To answer your question, if it stays 3G for a couple seconds and goes to G that definately means you DON'T have 3G in your area.
Kraize
Click to expand...
Click to collapse
Yeah i haved just thinked on it :/ Its badly
Well i will go to my network providor, to see if they resolve my problem!
Thanks for your time, i will report some news soon

When 3G was first set up in the country where I live, something like that would happen. It seemed to be the network not letting me roam into it because I had a GSM pre-3G SIM card. The problem solved itself when the network provider offically "turned on" it's 3G service. So I believe you might be experiencing a network related problem. Even if there is 3G coverage, your GSM account might not be eligible for 3G service or you might need a newer SIM card.

Force WCDMA Only

Hi all,
Would like to check if anyone knows how could i set "WCDMA Only" (3G Only) on Galaxy S?
I can only Force 2G only via the settings menu, but not 3G only.
Managed to access the "Phone Info" menu via *#*#4636#*#*, selected "WCDMA Only" from the dropdown box.
However, nothing seemed to be set nor i see any button to save the choice?
Anyone happen to know how can i have it set? Or i could manually set it by applying some settings somewhere?
Thanks alot!

you cant force 3g... you would get no signal if you didnt have a 3g connection

boinger66 said:
you cant force 3g... you would get no signal if you didnt have a 3g connection
Click to expand...
Click to collapse
I know that. However, such settings are available in Nexus One.

i2umi said:
I know that. However, such settings are available in Nexus One.
Click to expand...
Click to collapse
It is also available on the HTC Desire :
WCDMA only
GSM/WCDMA auto
GSM only

*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.

Is there a way to shortcut this with anycut?

-Double Post-
Sent from my GT-I9000 using XDA App (Which seems less than stable...)

The app Network simplifies the procedure quite a bit. Haven't actually gone into a low signal spot yet to see if it fully works as intended though.
Sent from my GT-I9000 using XDA App

thank you very much..i have been searching this high and low...you save my day..

Thank you so much! This helped me diagnose the SGS and see if I have 1900 3G in my area (1 bar). here's a tip that I used for quick access to the debug screen just as a trial and it actually worked
Enter ONLY *#*#197328640#*# then hit add to contacts (notice there is no * at the end).
Give it a name (Samsung Debug Screen) and tap to edit the number and enter the final * at the end.
Save and exit. Now whenever u want to enter debug mode to change the network or other stuff just type *#*# and it should appear. Tap on the contact and voila!

clubtech said:
*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.
Click to expand...
Click to collapse
Awesome, thanks for this! Lots of fun debug info in there.
boinger66 said:
you cant force 3g... you would get no signal if you didnt have a 3g connection
Click to expand...
Click to collapse
My operator doesn't have a 2G network... all they have is 3G. There's no point in my phone looking for anything other than a 3G network.

Solution added to FAQ

sorry to ask if this is already answered but how exactly to i get to CONFIRM my wcdma only selection? i check it and nothing happens, data connection stays on "G" symbol. I know for sure that at the place where i tested i get NO 3g signal. which means probably that i should be losing all signal after choosing wcdma only. that does not happen. also if i close the phone info app and reopen it, choice gets back to default (3g/gprs).
any help appreciated... I really need this.

forcing to only 3g is a bad move, i tested it on my n1 and i kept dropping calls once 3g lost signal.

raspdeep said:
forcing to only 3g is a bad move, i tested it on my n1 and i kept dropping calls once 3g lost signal.
Click to expand...
Click to collapse
I know but i need it for the internet.. and i need it badly.. please help anyone as soon as possible. thank you guys

Its available in the new firmware I9000XWJM1
Hey, its there in I9000XWJM1 and tested working great as expected! However its a beta so you may see other issues. Not sure if its there in latest stable.

Just to confirm, i upgraded my firmware to XWJM5 today, and i noticed that in settings > wireless and network > mobile networks, there's a new menu 'network mode' in which there's 3 options - auto / gsm only / wcdma only. Nice touch!
In answer to the cynics, there are times when browsing, when the phone is borderline whether to give you 2g or 3g, it does come in handy, and it's safer too, as if i have to browse on 2g it makes me want to smash the phone up!!

spark001uk said:
Just to confirm, i upgraded my firmware to XWJM5 today, and i noticed that in settings > wireless and network > mobile networks, there's a new menu 'network mode' in which there's 3 options - auto / gsm only / wcdma only. Nice touch!
In answer to the cynics, there are times when browsing, when the phone is borderline whether to give you 2g or 3g, it does come in handy, and it's safer too, as if i have to browse on 2g it makes me want to smash the phone up!!
Click to expand...
Click to collapse
LOL "safer"

@OP Although 'WCDMA only' mode may not be a good idea and hence not recommended but just to confirm
my current Build i9000XXJPH have following three modes
GSM/WCDMA (auto mode)
GSM only
WCDMA only

JM8 build also have this mode. I noticed that when I flash the i9000M (bell version) previously it didn't have these modes.

[Q] [SOLVED] Can't Get Data (3g) need help

PROBLEM SOLVED - DEFECTIVE SIM CARD. Thanks everybody !!!
Hi guys,
I really need your help with this one, here's the deal :
1. just bought my second SGS from vodaphone CH last week.
2. the phone came with 2.1 stock
3. i was not able to get data connection (able to make phonecalls and sms, but no 3g)
4. my apn settings are correct (i have another sgs configured same way on same network)
5. decided to upgrade to 2.2 (JPH) hoped this would help - NO
6. updated MODEM & CSC to the SAME ones working on my second SGS - STILL NOT WORKING
what else could it be ???
THANK YOU FOR YOUR HELP

did you install DroidWall ?

Nope,
Never heard of that Apo.
Can it help ?

dial *#0011#
see what if you are on data

Here's a screenshot
AllGamer said:
dial *#0011#
see what if you are on data
Click to expand...
Click to collapse
Here's what's there, can you see what is wrong ?

Try this, worked for me
This is a weird coincidence. I have (had!) the exact same problem.
My problem was when I reflashed my galaxy S with stock firmware back again, I lost 3g connection. Using a different sim (which supports only Edge) I was able to get edge connection but with my sim, there was no connection.
Here's what I did. It seems when you select the band selection to "Automatic" it somehow didnt get registered properly even though it showed up on the settings->Wireless and network->Mobile networks->NetworkMode. Even though it read GSM/WCDMA (auto mode) it wasnt actually the case.
So - type *#2263# on your phone to enter the Service Mode's Band Selection.
There see if first row is [1] AUTOMATIC[] OR [1] AUTOMATIC[*]
In my case it wasnt selected ie. there was no *. So I clicked on it and did that selection myself and baam!! H connection. It connected even before I exited from service mode.
I tried a 2g and 3g card after that multiple times and it connects properly to E or H from then on.
Give it a try. I am hoping that your APN is set properly.
Anup

Thanks for the help, but unfortunately this didn't work :-(
1. Automatic was selected.
2. Ive tried to play around with the options there and within the mobile networks.
Nothing works ... this is so frustrating :-(
Sent from my GT-I9000 using XDA App

up.........................................................................

Why didn't you just call Vodafone and get their help before flashing the phone If you already have another SGS configured same way at the same location with 3G, then chances are there is a hardware problem with the phone.
Anyways, try contacting vodafone, they might still do something about it (despite the fact you have voided their warranty by flashing).

PhoenixFx said:
Why didn't you just call Vodafone and get their help before flashing the phone If you already have another SGS configured same way at the same location with 3G, then chances are there is a hardware problem with the phone.
Anyways, try contacting vodafone, they might still do something about it (despite the fact you have voided their warranty by flashing).
Click to expand...
Click to collapse
The problem is that I'm not from Czech Republic. The phone was purchased there by a friend of mine and brought to me...

wCDMA Milestone (mod)

Doing this will boost call QUALITY & response time between the tower and your phone. It also seems to cut alot of the background noises as well.
1. open dialer
2. *#*#4636#*#*
3. change GSM Auto (prl) to wCDMA preferred.
4. click Enable QXDM SD Log
5. SMSC: -refresh, then long hold update.
6. Scroll to top, run ping test...
7. Once done, hit HOME.... NOT BACK!
if you run into any issues, swap back to GSM-Auto (prl) then update your SMSC number again. By default it loads as GSM-Auto, so if you reboot, you will have to swap it again.
-=-=-=-=-=-
Ive been running like this for around 10 days now and & definitely notice a good gain in call quality, not only in response time, but clarity as well. I don't get any background static and outside wind/other noise seems to drop as well also.
-Leave me feedback and let me know what you think if you try it.

Is this working fpr European Phones (in my opinion Germany) too?

gmbhneo said:
Is this working fpr European Phones (in my opinion Germany) too?
Click to expand...
Click to collapse
I have EUR version of XT720 and using it with T-Mobile USA; I tried that method, it works.

Ph0z3 said:
Doing this will boost call QUALITY & response ti
1. open dialer
2. *#*#4636#*#*
3. change GSM Auto (prl) to wCDMA preferred.
4. click Enable QXDM SD Log
5. SMSC: -refresh, then long hold update.
6. Scroll to top, run ping test...
7. Once done, hit HOME.... NOT BACK!
Click to expand...
Click to collapse
1-2-3 no problem
4_ I dont have that option anywhere
5_refresh Ok , but log hold update doesnt change anything ??????
6-7 no problem
I dont really feel any difference . ill tell you in a couple days
also there must be a way to set this on boot or make this persistant , I noticed if you go back in that menu and use back to exit it will also revert changes to default ...

gmbhneo said:
Is this working fpr European Phones (in my opinion Germany) too?
Click to expand...
Click to collapse
yes it is. like i said, if it doesnt, change back... no harm done.
DAGr8 said:
4_ I dont have that option anywhere
5_refresh Ok , but log hold update doesnt change anything ??????
Click to expand...
Click to collapse
4. Not all phones will... it varies with service.
5. should automatically update, if nothing pops up saying it saved... skip it.
DAGr8 said:
I noticed if you go back in that menu and use back to exit it will also revert changes to default ...
Click to expand...
Click to collapse
thats why i said USE HOME... NOT BACK. Also im looking at the radio file to figure out a boot sequence to make this permanent, once i get it solved, ill post it.

Ph0z3 said:
thats why i said USE HOME... NOT BACK. Also im looking at the radio file to figure out a boot sequence to make this permanent, once i get it solved, ill post it.
Click to expand...
Click to collapse
ok I know this is confusing but what I meant is if I apply the changes . then hit menu . I do some testing and then I go (again) in *#*#4646 etc etc , even if I dotn do anything and I just hit 'back' it will reset the settings ...
btw got my first compliment today someone said my phone sounded louder then usual 9normally its the otherway aroud ppl say its not loud enough ...

Did it and the network xhanged from GPRS to HSPA will test it and report here
Sent from my Milestone

Im sure ill get it at some point or another.. so here is it...
WHAT IS wCDMA... and why is it better than GSM?
-=-=-=-=-=-=-=-
wCDMA (Wideband Code-Division Multiple Access), an ITU standard derived from Code-Division Multiple Access (CDMA), is officially known as IMT-2000 direct spread. wCDMA is a third-generation (3G) mobile wireless technology that promises much higher data speeds to mobile and portable wireless devices than commonly offered in today's market.
wCDMA can support mobile/portable voice, images, data, and video communications at up to 2 Mbps (local area access) or 384 Kbps (wide area access). The input signals are digitized and transmitted in coded, spread-spectrum mode over a broad range of frequencies. A 5 MHz-wide carrier is used, compared with 200 KHz-wide carrier for narrowband CDMA.
Summary:
1.WCDMA is a 3G technology while GSM is a 2G technology
2.GSM is slowly being phased out in favor of CDMA
3.GSM is still more widespread than CDMA
4.WCDMA and GSM uses different frequency bands
5.WCDMA offers much faster data speeds than GSM
6.WCDMA would soon replace GSM

It's stated in this thread that it's non-dangerous as you can just reboot the phone / change it back. I'll just pop in here with a word of caution: I couldn't.
I have received a significant increase in speed and response time on my data connection since performing this change. I've received significant performance/quality on my conversations over the phone. I can still receive SMS's, however I can no longer send any...
When I attempt to change it back it's already on "GSM auto (PRL)", and I can no longer get the "Enable QXDM SD Log" button when changing to "WCDMA preferred".
I've attempted to change back by ignoring the step that included the "Enable QXDM SD Log" button, but to no avail.
I've attempted to re-flash GOTs 2.2.1 as that should include the most partitions of any flashable ROM, and I had hoped it re-wrote the radio. Apparently it did not.
I basically have a looong night of debugging ahead of me Such is the nature of modding.
[edit 1]
My phone is a UK Milestone, one of the first models. I am not sure of the technical term for the model.
[edit 2]
Solved it.. The SMSC number was set to 5p41450522.
After some time I found the SMSC (SMS center - responsible for sending SMS on the network) number from my provider. For TDC in Denmark it's +4540390999.
Pressed UPDATE and home button.
NOTE: For non-english phones the menu is translated, and as such the 2 buttons next to the SMSC field may be named the same. The left most button is UPDATE, the right most button is REFRESH. Some languages tend to translate those two words to the same.

The default setting, GSM auto (PRL), will switch to wCDMA when there's a load on the network connection. That is, with a call, a download, or something similar, the phone will accomplish exactly what's been done manually.
The difference is that with this setting, the phone will almost always prefer 3G, meaning you won't have the benefit of using the less power-consuming connection when there's very little load. There has to be almost no traffic for it to step down to 2G.
It won't affect call quality, and if it does, I'm going to go out and state that it's simply a placebo effect. Regardless of which setting you choose, call quality will be the same, as both will have the phone switch to 3G during a call anyways.
One thing you may notice, though. With it set to WCDMA preferred, you may notice a less reliable data connection, and perhaps some dropped calls if you're not in an area with good 3G coverage. GSM auto will prefer 2G network when reception is low, helping to ensure you stay connected.

jlor said:
Solved it.. The SMSC number was set to 5p41450522.
Click to expand...
Click to collapse
Glad you got your issue solved.
xslntx said:
One thing you may notice, though. With it set to WCDMA preferred, you may notice a less reliable data connection, and perhaps some dropped calls if you're not in an area with good 3G coverage. GSM auto will prefer 2G network when reception is low, helping to ensure you stay connected.
Click to expand...
Click to collapse
This is not an issue to me, because ATT is the dominant force here in the south KC metro area, I always have solid signal!

Tag, I did this to see if it fixes my SMS problem.

Thanks to your "wonderful mod" sending SMS didnt work anymore. Make sure you put in the correct SMSC number of your SMS Service Center!

I can no longer send any txt messages after applying this mod, I did a factory wipe and still can't. Any way to revert this?
Took me a while to find the telus SMSC number: +16475800172

gmbhneo said:
Is this working fpr European Phones (in my opinion Germany) too?
Click to expand...
Click to collapse
yes it does

here are two that I found:
t mobile +2063130004
at&t +13123149810
sorry to any issues you may have recieved whole doing this... but as always, full nandroid back- ups should be done before adding a new mod. yeah I realize I said there was no harm if this didn't work out, so I'm sorry for that.
Anyways just google for "(your carrier) SMSC address" then correct it if you are having issues.

Google Talk 4G Problem

I'm not sure if this has been covered yet on this forum, but since we all have 4G phones I thought it would be fair to let you guys know that google talk doesn't work on 4g. As i said i may be late on this (because i haven't been on in a while) but here's what I did.
If using mobile network:
1. Go to Settings/Wireless & Networks/Mobile Networks/System Select/Network Mode/
2. And change your connection to CDMA instead of LTE/CDMA
3. Your phone should reboot and you will be on 3G untill you change it back
I recommend using it over wifi for obvious reasons (its cheaper if you're not unlimited, and maybe quicker)
Also for Wifi no network changes need to be done

Great info, hackn. Thanks!

The Kraken! said:
Great info, hackn. Thanks!
Click to expand...
Click to collapse
You're welcome Kraken. I knew a couple people who didn't already know this so I figured someone up here could use the info as well