Ok this is weird. I had wm5 and an at&t rom before. My phone is unlocked and I am from Pakistan. I upgraded my rom to KaiserTouch 21898-WWE (Thread ID=619507)
Previously (i.e. before upgrading) my phone used to register on my operator when I inserted the sim, but now it just says No Service. I have tried Automatic/Manual Registration and although I can see my network in the list, whenever I select it, the tytn II gives the same error message. The weird thing is that I can use all my sims from other operators flawlessly on my tytn II. The particular sim (which before upgrading ran fine but is now giving a no service message) runs fine on my other cell phones. Can anyone give me a solution to the "No Service" problem? My tytn II is neither blacklisted nor does it have any hardware fault(as it can run other sims perfectly).
I have used Kaiser Sim/CID unlock with no luck. Also all my networks are 2G capable only
Are all of your connection settings correct for your carrier? Are you running on the stock radio?
Related
Hi,
This Kaiser is unlocked. When I insert my current t-mobile (NL) and turn-on, start the phone, will the 3G/HSDPA be configured directly?
If not, could anyone point me how to configure the 3G/HSDPA? Especially if you know the setting for t-mobile NL.
Honestly, I never have 3G/HSDPA phone, I use only GPRS with the HTC Magician.
Thanks for any help.
It should be configured automatically whenever you put in a new sim card, I'm sure T-Mobile NL will be one of the many supported networks.
Worked perfectly with my Vodafone UK sim, so unless you're with some little used operator out in the middle of nowhere, I don't think you'll have any problem.
Yep. can confirm this. Recognised my (7 or 8 years) old belgian Proximus SIM and configured all settings correctly.
I bought a Kaiser / TyTN II in Hong Kong, and it is a Chinese Windows version. When I was in Hong Kong, I tested and used it with different service provider SIM cards, it just worked fine.
However, I am now back to the states, and I put in a Cingular SIM card. My Kaiser could not find any the network at all. My Kaiser does not support the current service provider (Cingular), and suggested me to download the updates.
I tried to solve the problem by going through the network wizard, but I could only fine those Asia Pacific countries. No Northern Amercia countires can be found.
Please help!
Just to be certain, is it a newer 3G 64K SIM card?
Might just be a bad/old SIM card. I'd swing by a store and see if you can't get a new one myself...
Hi, I also got same problem today in China.
I am using Peoples Phone/GPRS SIM in HK, and everything work correctly.
Today I had business trip to china so I changed Peoples SIM to China UNICOM SIM(Only phone) . Then my kaiser couldn't find any network and asked me to chose Country and Netwrok. But China is not included in the list of Country....
PLEASE HELP ME Also!!
Whne I was about to give up, and left my SIM card in the phone. It took a few minutes, and my phone found "Cingular" signal. Now, I can use my Kaiser with my Cingular SIM card now.
However, whenever I turned off my phone or reset it, the problem happen again, but it took less time to pick up the Cingular signal.
I am using the latest SIM card from Cingular.
Remark: After a few trial confirming what caused the problem, I found out that if I chnage the channel (under phone setting) to Auto, my phone picks up Cingular signal everything I turn on or reset it.
I'm not really sure about this either. When I got my kaiser from att, it came with a new att 3g sim, which I never activated. I popped in my old cingular 3g sim from 2 years ago and it didn't work. Said no sim was inserted. That said, I'm currently using it with an old pre3g tmobile sim from 2004, and all is well.
I had bought a AT&T Tilt off ebay and in the States it works with my Cingular network. However when I travel as I am now in Greece and use the Cosmote SIM card it states that the SIM is not inserted and thus I am stuck. Cosmote runs on the 900/1800 network and Cingular runs on the 850/1900. The TyTn II is supposed to work on each and every frequency. It was supposed to be unlocked when I bought it but I don't know exactly what to do now.
Anyone help?
The Card is not even recognized, this points more to a broken SIM Card. The TyTn Can operate in all these Frequenzies and would prompt an error that this device is locked to another network if it wasn't unlocked. So this error message is more like there is no SIM Card inserted.
Have you tried it in another phone? cleaned the metallic contacts of the Chip?
Maybe you can try the unlocker program, to make shore it really is unlocked.
http://forum.xda-developers.com/showthread.php?t=357592
Good luck
Pyper70 said:
I had bought a AT&T Tilt off ebay and in the States it works with my Cingular network. However when I travel as I am now in Greece and use the Cosmote SIM card it states that the SIM is not inserted and thus I am stuck. Cosmote runs on the 900/1800 network and Cingular runs on the 850/1900. The TyTn II is supposed to work on each and every frequency. It was supposed to be unlocked when I bought it but I don't know exactly what to do now.
Anyone help?
Click to expand...
Click to collapse
Try to check on Phone settings if Network selection, Type and Band are in automatic mode.
Samson711 said:
The Card is not even recognized, this points more to a broken SIM Card. The TyTn Can operate in all these Frequenzies and would prompt an error that this device is locked to another network if it wasn't unlocked. So this error message is more like there is no SIM Card inserted.
Have you tried it in another phone? cleaned the metallic contacts of the Chip?
Click to expand...
Click to collapse
The Cosmote SIM I have for my TyTn works great in my friends K1 Motorola KRZR and his brother's RAZR...Both of which were unlocked in the US and also have greek SIM cards.
Does there need to be a special 3G SIM card inserted for the device to operate?
For the link
http://www.imei-check.co.uk/kaiser-unlock.php
Its telling me I have to pay to check if its unlocked....I don't want to shell out $40 for something that "might" be done already
My v1615 (with Vodafone) showed the same error after owning the phone for 2hrs! Vodafone confirmed the device had a hardware fault and issued a replacement straight away - new handset has been fine.
I'm not saying that's the case with yours but it's already highlighted to me that the stability of these phones can be flaky at times (having been warned by several people before buying)
Hello,
I have an (apparently) unlocked MDA Vario III. I originally tried with a virgin UK payg sim, and also a T-Mo UK sim, but no matter what settings I try, whether on standard Rom/Radio, or custom, I cannot make the data connection work.
I'm currently on the stock T-Mobile Rom and Radio, with factory T-Mobile data settings. Even that, with an activated T-Mobile sim gives me the "Cannot connect to the network for an unknown reason" error message.
What could be causing this? Have I scuppered the phone by trying to unlock it? Could it be the SPL? (That's the only non-stock thing currently on there). Is there a way to generate some kind of log to work out what's going on?
-- J.
Hi volks
I have unlocked my t-mobile mda Vario 3 (aka kaiser) and everything working fine, it work with all sims(f.e. A1, telering, ...) but not with "Hutchinson 3 Austria" it is an umts network and the kaiser should work whit it!
when i put in the 3 sim i can enter pin, device searching for network, but the kaiser will not connect to network, always searching for network. i live in Vienna, a big city, there should be enough signal strength *gg*
i also tried another 3 sim but will not work tried to change band settings and network settings but will not work. i also brought the kaiser to t-mobile and they send it to service, the service says that the device works fine and is unlocked
so anybody an idea?
i also have the same problem with my o2 sim card. it acquires a connection briefly then cuts out again and just keeps searching for a network
it happened to me too, i resolved the situation by inserting a piece of paper on the top of simcard, to make pressure because with time kaiser loses pressure needed to read the card...