Related
So I'm fairly new to android about three months now, and need help.....
1) How do you modify system files and apk's? (tried Estrongs but it won't let me use root access even when i click the always allow prompt)
2) Can someone explain exactly how i partition for Apps2SD ( PM me if possible)
3) Can you change bootscreens with a .zip flash? if so does anyone have a link for the cynanogen mod nexus boot as used in Darchvanilla??
4) How to change to a normal 2.1 lockscreen?
Thank you and any help is deeply appreciated.....
abov3dis said:
So I'm fairly new to android about three months now, and need help.....
1) How do you modify system files and apk's? (tried Estrongs but it won't let me use root access even when i click the always allow prompt)
2) Can someone explain exactly how i partition for Apps2SD ( PM me if possible)
3) Can you change bootscreens with a .zip flash? if so does anyone have a link for the cynanogen mod nexus boot as used in Darchvanilla??
4) How to change to a normal 2.1 lockscreen?
Thank you and any help is deeply appreciated.....
Click to expand...
Click to collapse
1.) no idea...try linda file manager.
2.) you partition it with the recovery image. swap/ext/fat32
3.) yes
4.) define normal?
Normal by the 2.1 vanilla lockscreen (I Sware I hate the HTC lock,lol)
and could you post a few instructions for apps2sd because i'm still not sure,
abov3dis said:
Normal by the 2.1 vanilla lockscreen (I Sware I hate the HTC lock,lol)
and could you post a few instructions for apps2sd because i'm still not sure,
Click to expand...
Click to collapse
to remove the htc lock screen just pull the lockscreen.apk via adb or using the new fresh kitchen.... or you could install fresh's new 2.1 rom. apps2sd should set up automatically as long as the rom you pick has it integrated. you have to make sure your sd card is partitioned before flashing the rom.
fixxxer2008 said:
to remove the htc lock screen just pull the lockscreen.apk via adb or using the new fresh kitchen.... or you could install fresh's new 2.1 rom. apps2sd should set up automatically as long as the rom you pick has it integrated. you have to make sure your sd card is partitioned before flashing the rom.
Click to expand...
Click to collapse
I can concur with this ^
If you want a good 2.1 rom then go with damage or fresh. If you want a 1.5 id go with pancake without sense, super fast!
First and foremost i want to thank esk02k and his friend for the images. All Credit goes to him for the images check out his post on xda called the thc weed leaf (i would post the link to his page but it wont let me says out side links are not allowed by new users but yet its an internal link). I didnt use all of them as there was only 37 images that i had to replace and i couldnt find the file that links to the boot up animation png files to add in the extra files so i used most of them and all i did was make it to the right size and converted them from jpg to png.
I am using the stock rom and my phone is rooted using universal androot version 1.6.2 beta5 (search for 1-click root for N1 to find this it will work on this phone) you have to install super user then you need root explorer found in the market. Now on to how to install this.
1) Install universal androot and the root explorer run universal androot to get your phone rooted you may chose soft root which only lets you temporary root till you reboot (dont worry it will not void your warrenty)
2) Download kyocera zio m6000.zip at the bottom of this post and extract it to a folder on your pc
3) Copy the folder to the root of your sd card
4) Open up root explorer and click on /data/FLEX/bootanimation
5) Copy Startup_Sound_M6000.ogg from the folder you copied to your sd card to the /data/FLEX/bootanimation folder overwriting the one in there
6) Next goto /data/FLEX/bootanimation/assets folder and copy all the png files from the folder you copied to your sd card to the assets folder over writing the ones in there
7) Exit out of root explorer and reboot your phone to see your new boot up screen and enjoy the first mod for this phone. (Note im not sure why the android screen dont show up no more when none of the files that was replaced was the android png files only the cricket png files are replaced)
Well there you have it the very first mod for this phone i hope you all like it as this is my first attempt at making a boot up screen animation im not sure how to make it animate more so please give constructive critisim do not bash it please and please tell esk02k thank you for all the hard work he did with the images all i made was the start up sound and resized the images and converted them to png to work on this phone so in all it only took me bout 7 hours his work was a ton harder and probably took him days maybe weeks. So major props to esk02k
**edit** Wow i started this by making the first mod for the phone and showed you all where to replace the stuff and got the ball rolling and not one thank you. Wow it shows me how much im appreiated here.
Everytime I try to copy the files, it says I do not have enough space. What do I need to get rid of?
muttd said:
Everytime I try to copy the files, it says I do not have enough space. What do I need to get rid of?
Click to expand...
Click to collapse
Remove some unwanted apps or apps that came on the stock rom that are worthless to you i removed the demo games that the company put on it and that gave me enough free space you need 6.50 mega bytes free to use this i made it as small as i could with out making it look like crap. you can remove some of the apps from /data/app i would recomend to back up the files before u delete them in case u have to put them back.
I have tried to copy the new pngs to the assets folder, but every time. I do, the original files replace the new ones. The closest I got was when I rebooted and I saw the first png of the original cricket boot animation, then it skipped all but the very last one of the new png I attempted to install.
Can anybody help me?
Sent from my Zio using XDA App
I am a new user of Kyocera Zio M6000. I also want to install the boot up screen for it. You describe the installation process clearly. Thank you for it.
SnakeFist said:
First and foremost i want to thank esk02k and his friend for the images. All Credit goes to him for the images check out his post on xda called the thc weed leaf (i would post the link to his page but it wont let me says out side links are not allowed by new users but yet its an internal link). I didnt use all of them as there was only 37 images that i had to replace and i couldnt find the file that links to the boot up animation png files to add in the extra files so i used most of them and all i did was make it to the right size and converted them from jpg to png.
I am using the stock rom and my phone is rooted using universal androot version 1.6.2 beta5 (search for 1-click root for N1 to find this it will work on this phone) you have to install super user then you need root explorer found in the market. Now on to how to install this.
1) Install universal androot and the root explorer run universal androot to get your phone rooted you may chose soft root which only lets you temporary root till you reboot (dont worry it will not void your warrenty)
2) Download kyocera zio m6000.zip at the bottom of this post and extract it to a folder on your pc
3) Copy the folder to the root of your sd card
4) Open up root explorer and click on /data/FLEX/bootanimation
5) Copy Startup_Sound_M6000.ogg from the folder you copied to your sd card to the /data/FLEX/bootanimation folder overwriting the one in there
6) Next goto /data/FLEX/bootanimation/assets folder and copy all the png files from the folder you copied to your sd card to the assets folder over writing the ones in there
7) Exit out of root explorer and reboot your phone to see your new boot up screen and enjoy the first mod for this phone. (Note im not sure why the android screen dont show up no more when none of the files that was replaced was the android png files only the cricket png files are replaced)
Well there you have it the very first mod for this phone i hope you all like it as this is my first attempt at making a boot up screen animation im not sure how to make it animate more so please give constructive critisim do not bash it please and please tell esk02k thank you for all the hard work he did with the images all i made was the start up sound and resized the images and converted them to png to work on this phone so in all it only took me bout 7 hours his work was a ton harder and probably took him days maybe weeks. So major props to esk02k
Click to expand...
Click to collapse
Apparently, the same number of images as the original must be used?
I tried one of my own, using boot screen found elsewhere on XDA that had more images. Didn't work.
Going to play around w/ the images today, reduce the count to the same as the original and see if that's indeed the case.
Or maybe it was the size of the images. I dunno yet.
Doesn't do a thing to my Cricket Zio.
hey i figure since your so gutsy can you get me a recovery rom my phone is crashed and cant find crap online
aago1254 said:
hey i figure since your so gutsy can you get me a recovery rom my phone is crashed and cant find crap online
Click to expand...
Click to collapse
We need a good solid backup rom, any post?
If your phone is a brick check the other zip threads for the update and you'll be on your way to a working phone
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Zip threads?
Where can I find these zip threads?
ZIO threads. Like the 2.2 in the development section
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Zip threads
Well, the 2.2 thread appears to refer to the windows downloader, with which I have two problems:
1) I don't run windows but linux, and
2) To do this, it appears I need to get into USB debug mode. I'm stuck in fastboot.
What I think I really need is the stock ROM from the Sanyo Zio. Does somebody here have this?
I can see if I can use adb to pull the 2.2 rom and if I have any luck I will let you know
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Thanks
I'd really appreciate it.
You can email me too - justin at justinholmes.com
You may want to see if you can use a windows machine to update. I think you can do a virtualbox but I'm not 100%
Sent from my from my rooted 2.2 no bloat Zio using XDA App
I'm wondering if ReactOS is far enough along to run the updater. Will have to give it a try, liveCD.
No go. Booted the live CD, couldn't access any of the media devices to access the update tool.
Hmm
but listen, I can't get the phone into USB debug mode, so how can I run the updater? At the moment I'm stuck with fastboot. Normal boot is black screen, no response of any kind, no adb.
Turn the phone off, hold volume up down and power and your phone will bopt into modem download mode. Then update.
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Umm wrong thread.
Try the android 2.2 thread. Lot's more helpful info there friend
jMyles said:
but listen, I can't get the phone into USB debug mode, so how can I run the updater? At the moment I'm stuck with fastboot. Normal boot is black screen, no response of any kind, no adb.
Click to expand...
Click to collapse
Sent from my Zio using XDA App
ok, so maybe im slow or stupid & yes ive searched & searched, but no luck for me.
im trying to make some "flashable" update,.zip files to install to the system/app section of my htc cdma hero, & ive read & read, & researched, but im still at a loss.
so can anybody please in "noob/dummies" terms explain on how to do this, what files i need, b/c i see these "manifest.mf, cert.sf, & cert.rsa" files inside the update.zip files, & then theres the update-script file, & the apk.
how/where do i make/get these files, etc.
im ADHD & dyslectic, so please make it as simple as possible to follow.
also, how do i uninstall system apps & all the apps folders/cache files w/ adb, ive tryed but get "failed" error, i mean i can go in w/ root explorer & delete these, but it seems like a pain to track it all down, i just dont want to remove the app, but uninstall them completely, & not leave any junk behind.
thanks a million!
im trying to swap out some system apps (same apps), just different versions & size, & i tryed to just replace them w/ root explorer & reboot, but it doesnt work.
im on cm6.1 stable if that helps
jcj77d said:
ok, so maybe im slow or stupid & yes ive searched & searched, but no luck for me.
im trying to make some "flashable" update,.zip files to install to the system/app section of my htc cdma hero, & ive read & read, & researched, but im still at a loss.
so can anybody please in "noob/dummies" terms explain on how to do this, what files i need, b/c i see these "manifest.mf, cert.sf, & cert.rsa" files inside the update.zip files, & then theres the update-script file, & the apk.
how/where do i make/get these files, etc.
im ADHD & dyslectic, so please make it as simple as possible to follow.
also, how do i uninstall system apps & all the apps folders/cache files w/ adb, ive tryed but get "failed" error, i mean i can go in w/ root explorer & delete these, but it seems like a pain to track it all down, i just dont want to remove the app, but uninstall them completely, & not leave any junk behind.
thanks a million!
im trying to swap out some system apps (same apps), just different versions & size, & i tryed to just replace them w/ root explorer & reboot, but it doesnt work.
im on cm6.1 stable if that helps
Click to expand...
Click to collapse
Check out http://wiki.cyanogenmod.com/index.php?title=Barebones for a great guide on using adb to uninstall system apps.
As for update.zip info, I'm just starting to break into it myself. For a noob, I would suggest using the attached update.zip template (a read me is included ), and then you will need to sign the update. Two easy options:
1) Search the market for signapktic by Stericson.
2) Check out this amazing program: http://forum.ppcgeeks.com/android-development/126517-pc-ppcgeeks-android-apk-zip-signer.html
jcj77d said:
so can anybody please in "noob/dummies" terms explain on how to do this, what files i need, b/c i see these "manifest.mf, cert.sf, & cert.rsa" files inside the update.zip files, & then theres the update-script file, & the apk.
how/where do i make/get these files, etc.
Click to expand...
Click to collapse
Those three files are created when you sign the zip. If you just want the apks flashed to the system then you don't need to modify the script file in that template - as for the framework.jar/apk part of the instructions, you can ignore those because that part was added bc the zip was initially created for themers
If you're interested in doing more than flashing to /system, such as flashing to /data or /sdcard, or removing items with a flash zip then check out my old post HERE - as a forewarning some of the stuff can get pretty technical
Otherwise follow the above post and you should be set both signers he/she listed are pretty easy to use
kyouko said:
If you're interested in doing more than flashing to /system, such as flashing to /data or /sdcard, or removing items with a flash zip then check out my old post HERE - as a forewarning some of the stuff can get pretty technical
Click to expand...
Click to collapse
LOL, I wasn't sure exactly where I got that .zip template from (That was a looong night of Google'ing and reading ) And the blog that you linked to is where I learned a lot of what I was after. Thanks! Now, if I can just figure out a way to create an update-script that will flash MY memory with all there is to know about Linux...
The Fer-Shiz-Nizzle said:
Check out http://wiki.cyanogenmod.com/index.php?title=Barebones for a great guide on using adb to uninstall system apps.
As for update.zip info, I'm just starting to break into it myself. For a noob, I would suggest using the attached update.zip template (a read me is included ), and then you will need to sign the update. Two easy options:
1) Search the market for signapktic by Stericson.
2) Check out this amazing program: http://forum.ppcgeeks.com/android-development/126517-pc-ppcgeeks-android-apk-zip-signer.html
Click to expand...
Click to collapse
thanks, i know how to sign
Issue 1: I'm trying to install ClockPackage.apk, Gallery3D.apk, MyFiles.apk in order to have the stock clock. I keep getting the error "Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]" when i try to use the command adb install (any of the 3).apk. I have also tried "adb push" which doesn't seem like a valid command. I tried moving the 3 apk files to my sd card on the phone and using "installer" and "eoeAppinstaller" from the market and these fail as well. Any more suggestions? I really like this di11igaf's ROM, but I cannot stand the new alarm ( i like the gradual volume increase of the stock). I have tried a couple of market clocks, but they just didn't work for me. Thank you very much in advance.
Issue 2: If I use CWM and choose Reboot into Recovery i get the following:
Android system recovery <3e>
Samsung Recovery Utils
- for BML -
Enter OK Key, Select : Vol UP / Vol Down
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
format internal sd card
update media, please wait
update media finished
-- Install from package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
-- Applying Multi-CSC...
Installing Multi-CSC
(in red)
Installation aborted
At this point I can use the volume buttons to scroll up and down, but the power button will not select anything. The only thing I can do is remove the battery and boot the phone back up, which then takes me into CWM recovery v2.5.1.0. I was able to install the di11i add on, but I don't think that I'm supposed to be pulling the battery to get to this point.
Thanks again and sorry about the long post.
Im no expert on this type of stuff but I use di11i roms and I just transfer apk's to the root of the phone through the regular mass storage mode and use root explorer for the rest.Havent had any problems yet.
As for issue 2 is the package a .zip file? If not that may or may not be the problem.
From my own personal experience the 3dapp isn't sign so I can't install it too
System apps are best copied manually into the /system/app folder using app like root explorer. Make sure the folder is in r/w mode.
diablo009 said:
System apps are best copied manually into the /system/app folder using app like root explorer. Make sure the folder is in r/w mode.
Click to expand...
Click to collapse
+1 you can simply use root explorer to copy the apk files into \system\app folder. quick and easy.
booty hater said:
As for issue 2 is the package a .zip file? If not that may or may not be the problem.
Click to expand...
Click to collapse
It is a zip file and it installed. What concerned me was the process. Should it have frozen up like that and forced a battery pull? Nothing I've read leads me to believe that was proper behavior of the CWM.
diablo009 said:
System apps are best copied manually into the /system/app folder using app like root explorer. Make sure the folder is in r/w mode.
Click to expand...
Click to collapse
I don't have that directory. Are you creating it on the phone and then putting the files into it? I may have not been clear on what I am trying to do. I am trying to do what was posted in this forum http://forum.xda-developers.com/showthread.php?p=11207089&highlight=clockpackage#post11207089 posts #2515
I just looked into exactly what you were talking about and I got it figured out.It wasnt installing for me either but this is what I did and it works now.
Through mass storage mode I copied the 3 files to the root of the card.
Then I moved the files to the app folder which is inside the system folder.
I use root explorer for the moving.
When you move them into the app folder its gonna ask to overwrite say yes.
After you get everything moved it will work if you go to the app in the drawer.I never actually installed anything but did an overwrite.
booty hater said:
I never actually installed anything but did an overwrite.
Click to expand...
Click to collapse
Right. Apps in the system/app folder are auto-picked up
supervg3 said:
I don't have that directory. Are you creating it on the phone and then putting the files into it? I may have not been clear on what I am trying to do. I am trying to do what was posted in this forum http://forum.xda-developers.com/showthread.php?p=11207089&highlight=clockpackage#post11207089 posts #2515
Click to expand...
Click to collapse
u cannot see it in my files. u need to have root access, and something like root explorer.
So it looks like I could have just copied and pasted the files from the sdcard/Clock folder I placed them in to the /system/app folder using Super Manager. I swear I tried that and it failed before I went through all the crappy steps below. Oh well.
Ok this is going to sound pretty cheap, but I didn't want to pay the ~$4.02 for an ap that I was going to use three times. I did find another way. I used Super Manager and http://forum.xda-developers.com/showthread.php?t=877316&highlight=installing+apk post #3.
So for any other cheapskates out there.
1. Install Super Manager on phone
2. Install ADB on pc
3. Connect phone to pc and copy the three files ClockPackage.apk, Gallery3D.apk, and MyFiles.apk to the sd card. (I just drag and dropped in windows explorer)
4. Use Super Manager to move to /system/app/ and rename the existing file Gallery3D.apk (I renamed it to Gallery3D.old)
5. Use adb to copy the 3 files from the directory in which you originally placed them on the phone to /system/app/
in adb type:
adb shell
su
(accept the prompt on your screen)
cd /sdcard/whereveryoustuckfile
cp blahblahblah.apk /system/app/ (the red from Pirateghost).
6. Reboot
The clock and alarm work fine, but I cannot get Daily briefing option in alarm to work. I get a FC. I did install the "apk add on pack for 5.6" post 3 of http://forum.xda-developers.com/showthread.php?t=897416 , but I dont think Daily Briefing was included in that. Any suggestions? And one last thing - what is the di11iBrowserfix.zip from post 3 of the thread above for? Thanks again to all who contributed.
I got the daily briefing working. Everything is almost perfect, but I would like two things still.
1. Is there anyway to change the tune that is played when you have smart alarm selected? I have a different tone selected, but I think once you select smart alarm it defaults to that new age tone.
2. My alarm goes off, I stop it, but then I have to unlock it before I see the daily briefing. Can anyone think of a way to have the phone unlock when I turn off the alarm. I know it is so insignificant, but it used to do that when it was stock and it was pretty cool.
Come one guys and gals - don't make me figure this one out by myself j/k but seriously I have surprised myself already by getting this far and I really don't have skill or knowledge for the last two things. I'm learning though....slowly.
Thread etiquette
Did I do something wrong here? I got some really quick responses to my questions before, but nothing on my latest. I ask this next question with all seriousness - should I have started a new thread since it's kind of a new topic? No worries either way, I just want to post in the the most effective way. Thanks. BTW, my phone is working great. I'm getting ready to install 6.0 GPS is a little screwy - often has me west of my location by about 30 meters by I attribute that to the phones hardware. Other than that I have no complaints (except for the lame smart alarm tune)
diablo009 said:
Right. Apps in the system/app folder are auto-picked up
Click to expand...
Click to collapse
Diablo, I know this totally off topic and I´m sorry, but I´ve just seen your signature and noticed you run di11igaf´s 6.0 on Glitterballs and as I´m not able to post on development yet, here´s my question:
Will I have too much trouble on flashing another kernel over the di11picKle? I was happy with speedmod + jk4... that was the best working config for me so far...
Just keep in mind I´m a noob
ddoubt said:
Diablo, I know this totally off topic and I´m sorry, but I´ve just seen your signature and noticed you run di11igaf´s 6.0 on Glitterballs and as I´m not able to post on development yet, here´s my question:
Will I have too much trouble on flashing another kernel over the di11picKle? I was happy with speedmod + jk4... that was the best working config for me so far...
Just keep in mind I´m a noob
Click to expand...
Click to collapse
you should start a topic instead append to other's topic.
you can flash any kernel/modem using CWM, just make sure it is i9000's.
ddoubt said:
Diablo, I know this totally off topic and I´m sorry, but I´ve just seen your signature and noticed you run di11igaf´s 6.0 on Glitterballs and as I´m not able to post on development yet, here´s my question:
Will I have too much trouble on flashing another kernel over the di11picKle? I was happy with speedmod + jk4... that was the best working config for me so far...
Just keep in mind I´m a noob
Click to expand...
Click to collapse
Nope. Get the CWM flashable zip, and copy to ur sdcard. Then go to CWM recovery console, and install this zip. Reboot.
But, please take a nandroid backup, and try to avoid OC kernels if u r unsure ur phone can handle it. Phones freeze when tried to oc beyond their capability.
diablo009 said:
Nope. Get the CWM flashable zip, and copy to ur sdcard. Then go to CWM recovery console, and install this zip. Reboot.
But, please take a nandroid backup, and try to avoid OC kernels if u r unsure ur phone can handle it. Phones freeze when tried to oc beyond their capability.
Click to expand...
Click to collapse
Thanks for the info and sorry for appending to this topic!
hi guys, so as the title states, i'm new to the droid scene and i have a streak 7. i have been reading for a few days now and want to root my streak. i am unsure about how to do this, i have seen gingerbreak and superoneclick. based on the fact that i dont know crap, which would you guys recommend? i have some other issues that concern me. maybe some of those fixed would be a good start?
issues:
1. i cant seem to connect my streak to my pc, running windows vista
2. i have no idea what all these acronyms mean?
3. i dont know what ROM to use, hell i dont know what a good ROM is
4. i cant connect my streak and my iphone via wifi
maybe some one can pint me to a basic, newb users guide would be good also. if some one is willing to help me, i'd appreciate it! sorry if this is the wrong spot
hello and welcome
1) did you install the dell drivers?
2) which acronyms are you referring to?
3) rom flavor depends on your needs... streakdroid is awesome but has bluetooth issues...on the flip side......is is overclockable. Im using custom 2.2 ...I need bluetooth sadly and can't sacrifice it for an overclockable kernel.
4)you need to modify the wpa supplicant file in order to tether via adhoc ( device to device )
Steps on how are in the forum.im typing via my ds7 ....otherwise id look it up for you. Its easy to find though.
Hope that helps!!!
pyraxiate said:
1) did you install the dell drivers?
2) which acronyms are you referring to?
3) rom flavor depends on your needs... streakdroid is awesome but has bluetooth issues...on the flip side......is is overclockable. Im using custom 2.2 ...I need bluetooth sadly and can't sacrifice it for an overclockable kernel.
4)you need to modify the wpa supplicant file in order to tether via adhoc ( device to device )
Steps on how are in the forum.im typing via my ds7 ....otherwise id look it up for you. Its easy to find though.
Hope that helps!!!
Click to expand...
Click to collapse
Thanks for your reply. Here is what I found:
1. The drivers I found won't work with vista but I was directed to another method I hope works
2. All the "apk, rom, wpa" stuff like that. I mean I figured out a rom is what you use as a front end of sorts
3. I don't need overclocking, don't need speed at all as it's just going in my truck as an audio source, gps, video player, Internet thing.
4. I'll use your post to search this method out. Might need some help. I'm assuming I need to have the devise rooted first?
On a rooting note, what's the best, easiest method for a newb such as myself? I am on 2.2.2 and it's a t-mobile streak 7.
Again thanks for your help.
With 2.2.2 use gingerbreak. Its one button and your rooted.
Sent from my Dell Streak 7 using XDA Premium App
csheppard93 said:
With 2.2.2 use gingerbreak. Its one button and your rooted.
Sent from my Dell Streak 7 using XDA Premium App
Click to expand...
Click to collapse
Does it require connecting to a pc? Or can I download gingerbreak and install it on an sd card? Better yet do you know of a link to a tutorial or thread? I'm on my phone now and won't be around a computer till late Sunday.
waxworkz said:
Does it require connecting to a pc? Or can I download gingerbreak and install it on an sd card? Better yet do you know of a link to a tutorial or thread? I'm on my phone now and won't be around a computer till late Sunday.
Click to expand...
Click to collapse
It does not require connecting to a PC. Here is the link to the tutorial; http://forum.xda-developers.com/showpost.php?p=13900137&postcount=1
rsfinsrq said:
It does not require connecting to a PC. Here is the link to the tutorial; http://forum.xda-developers.com/showpost.php?p=13900137&postcount=1
Click to expand...
Click to collapse
Thank you, I shall try that and hopefully not brick my streak.
As far as installing a ROM, any other ideas, advice, links? I like to read as much as possible to be well informed before I do anything.
If you like honeycomb android 3.2 you might wanna us honeystreak hd7 but it isn't the easiest to put on ur streak and u need a computer for this rom
Sent from my Droid using XDA Premium App
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
shadowdrag96 said:
If you like honeycomb android 3.2 you might wanna us honeystreak hd7 but it isn't the easiest to put on ur streak and u need a computer for this rom
Sent from my Droid using XDA Premium App
Click to expand...
Click to collapse
Thank you. Seems as I'll be home later tonight so I'll be able to try and at least root the streak tonight. I hope it goes well.
ok so i rooted my streak 7 tonight. wasnt so bad i used gingerbreak.
now i need to modify the supplicant file in order to tether my iphone to my streak via wifi. i found all the info and the files, but i dont know how to "flash the zip in recovery" i read through some 16 pages and still cant figure it out. can any one point me to a step by step on how to apply the patch? or just write it out step by step? i am getting the hang of this stuff but i dont know enough and dont want to mess up my streak and not be able to use it all via wifi.
thank you again guys, you are a big help to a newb
ok i think i figured out how to do it:
1: changed zip file name to update.zip
2. moved to sd card
3. opened up clockwork recovery
4. ran rom up date of said zip file
5. asked to make back up
6. rebooted in recovery mode
7. dont know if it worked??
8. still wont see my iphone using mywi for tethering
again any help would be great guys. thanks
wpa fix
waxworkz said:
ok i think i figured out how to do it:
1: changed zip file name to update.zip
2. moved to sd card
3. opened up clockwork recovery
4. ran rom up date of said zip file
5. asked to make back up
6. rebooted in recovery mode
7. dont know if it worked??
8. still wont see my iphone using mywi for tethering
again any help would be great guys. thanks
Click to expand...
Click to collapse
You don't need to do any of that....
http://forum.xda-developers.com/showthread.php?t=970219
You are rooted. All you have to do is use any file explorer which allows writing to root and copy this file to /system/ bin (back up your old one by renaming it to wpa_supplicant.old first. Restart wifi by going into settings and uncheck / recheck the box. You can now tether
The file is a zip. Extract the wpa_supplicant file from it and copy......not the whole zip itself...just the extracted file
pyraxiate said:
You don't need to do any of that....
http://forum.xda-developers.com/showthread.php?t=970219
You are rooted. All you have to do is use any file explorer which allows writing to root and copy this file to /system/ bin (back up your old one by renaming it to wpa_supplicant.old first. Restart wifi by going into settings and uncheck / recheck the box. You can now tether
The file is a zip. Extract the wpa_supplicant file from it and copy......not the whole zip itself...just the extracted file
Click to expand...
Click to collapse
Wow and I thought about copying the files. But I kept reading about "running" a patch, so I thought I had to let the script do something. Thank you very much for your link! I will try it hopefully tonight when I get home from working.
ok i am trying what you posted pyraxiate, but i cant seems to rename the files? i have tried both es file explorer and android file explorer.
ok i dont think my root went through. i re-read that the gingerbreak has to be on the devise and i had it on the sd card. problem is i cant get the gingerbreak apk to the eternal memory of the devise. my computer is only 32 bit and the adb files wont work on 32 bit, only 64 bit. so it seems i am stuck until i find a computer with an OS other than vista! damn it, unless some one has solution guess i am stuck unrooted for now
Do yourself a favor and use the super1click via tether to a laptop. Its easy. Install the drivers they give. Also I bought root explorer. Well worth it!
Also you can use the xp32 bit driver. It worked for me.
http://forum.xda-developers.com/showthread.php?t=939921
That's how I did mine
If you have the gingerbreak.apk on the SD card use a file manager and install it. Then open in in the app drawer and click root. The device will reboot if it worked. Might take a few minutes and look like it froze.
Sent from my Synergy Rom
Thing is I emailed it to myself and it still saved it to the sd card part, even though I removed my sd card?? I did the gingerbreak and it did reboot, I also did the clockwork recovery. I still don't know if it worked? Seems as though I try and rename the wpa files and I'm not allowed, does this mean that it isn't rooted?
waxworkz said:
Thing is I emailed it to myself and it still saved it to the sd card part, even though I removed my sd card?? I did the gingerbreak and it did reboot, I also did the clockwork recovery. I still don't know if it worked? Seems as though I try and rename the wpa files and I'm not allowed, does this mean that it isn't rooted?
Click to expand...
Click to collapse
I know es file explorer wont work for root. You need a root file explorer. Also, it would be a good idea to download a rom ( either streakdroid or custom 2.2.2), put it on the internal storage, and try booting into cwr to flash it. You boot cwr by powering the streak off first. Hold volume up in and push / hold power. You will get a recovery boot menu. From there choose update from zip ( this is where cwr is) and cwr should boot. From there follow guides to wipe data / cache / delvik and then go to install a file from zip. Choose the rom zip ...sit back...and relax as it flashes to a fully rooted rom
Hope that helps!!