Related
I am unable to mount my SD card when it is in my G1 and connected to my computer. I used to be able to before I upgraded to Windows 7. I am using JacHero 2.7.1 with the latest USB drivers, fastboot and ADB both work. But when I connect my phone to my computer and choose to mount the card, nothing happens on my computer. In device manager, my G1 is still there under ADB Interface. However, the SD card is mounted as WPD File System Volume Driver with a little caution sign on the icon. When I view properties of the device, it says "The device cannot start. (Code 10)"
How can I get this to work? Its kinda annoying to have to turn off my phone, remove my fishbone case and go through all that just to put a picture on it.
SolemnWishing said:
I am unable to mount my SD card when it is in my G1 and connected to my computer. I used to be able to before I upgraded to Windows 7. I am using JacHero 2.7.1 with the latest USB drivers, fastboot and ADB both work. But when I connect my phone to my computer and choose to mount the card, nothing happens on my computer. In device manager, my G1 is still there under ADB Interface. However, the SD card is mounted as WPD File System Volume Driver with a little caution sign on the icon. When I view properties of the device, it says "The device cannot start. (Code 10)"
How can I get this to work? Its kinda annoying to have to turn off my phone, remove my fishbone case and go through all that just to put a picture on it.
Click to expand...
Click to collapse
You can always use adb push? Lol try uninstalling the usb storage devices and reinstalling them
well, the problem is USB Mass Storage doesn't even show up. And when I try to install newer drivers it says "Windows has concluded that your driver is up to date" and stuff like that. ADB push is a little slow for me lol
Uninstall whatever your SD Card is installed as, then restart your computer, replug in your phone and mount the SD Card and it should prompt that a new device was plugged in.
h.nocturna said:
Uninstall whatever your SD Card is installed as, then restart your computer, replug in your phone and mount the SD Card and it should prompt that a new device was plugged in.
Click to expand...
Click to collapse
Just tried that, the moment I plugged it in, my computer automatically installed the driver, so still not working.
SolemnWishing said:
Just tried that, the moment I plugged it in, my computer automatically installed the driver, so still not working.
Click to expand...
Click to collapse
Ugh, I hate that... try manually updating drivers and see if you can get it to install the Mass Storage Device drivers from a list...
I tried that, there wasn't an option for USB Mass Storage, but there was one for SD Card in the pre-installed driver list, however when I selected that one I received an error. Just a note, that Android HTC Phone USB Device is listed under disk drives with no caution signs in the icon, however I am unable to get that one to work either. Could it possibly be Windows 7..?
AHAHAHHAHA YES I FIXED IT WOOO HOOOO!
Okay, so what I did was go into the development settings and UNcheck USB debugging. The moment I did that, my computer made the "new hardware sound" and then said "driver install successful" and when I clicked on it to see the driver, the driver was "USB Mass Storage Device". Now I can mount it WOOHOO!
Thanks you guys for all the help
edit:
With USB debugging reenabled, it stops working again, so I gotta turn it off everytime I wanna mount... ah well
That sucks, I have mine permanently on cuz I use ADB so much (Also using Windows 7 here) And everything detected perfectly. Well good job on finding a workaround.
SolemnWishing said:
AHAHAHHAHA YES I FIXED IT WOOO HOOOO!
Okay, so what I did was go into the development settings and UNcheck USB debugging. The moment I did that, my computer made the "new hardware sound" and then said "driver install successful" and when I clicked on it to see the driver, the driver was "USB Mass Storage Device". Now I can mount it WOOHOO!
Thanks you guys for all the help
edit:
With USB debugging reenabled, it stops working again, so I gotta turn it off everytime I wanna mount... ah well
Click to expand...
Click to collapse
Great could u change thread title to solved? Im sure lots of people have this problem too .Also update your OP =]
alritewhadeva said:
Great could u change thread title to solved? Im sure lots of people have this problem too .Also update your OP =]
Click to expand...
Click to collapse
ahahaha sorry, buy whats an OP?
SolemnWishing said:
AHAHAHHAHA YES I FIXED IT WOOO HOOOO!
Okay, so what I did was go into the development settings and UNcheck USB debugging. The moment I did that, my computer made the "new hardware sound" and then said "driver install successful" and when I clicked on it to see the driver, the driver was "USB Mass Storage Device". Now I can mount it WOOHOO!
Thanks you guys for all the help
edit:
With USB debugging reenabled, it stops working again, so I gotta turn it off everytime I wanna mount... ah well
Click to expand...
Click to collapse
thanks mate you helped me out was having the same problem on my zte blade
Thank you so much my friend.
I had the same problem on my Desire.
I was wondering couple hours for this stupid thing.....and finally I mound my SD Card on your way.
No Go!
Windows 7 64bit for me and Galexy Prevail still no go with the WPD FileSystem Volume Driver, I can't get this suka! started and it was working before everything? why did it stop?
I hate this crap...... Ahhhhhhhhh! Im pulling my hair on this crap.... Willing to try other sugestions, I am def not reformatting to get this to work...lol...
---------- Post added at 10:06 AM ---------- Previous post was at 09:24 AM ----------
Okay because of a great guy from a microsoft website forumboard I was able to fix this with the below fix.
Thank you (Patricio16)
If still doesnt work try this:
1. My Computer -> Properties -> Advanced System Settings. This takes you into the system properties like in XP. Go into Environment variables and create a new System varable called devmgr_show_nonpresent_devices (I don't think it's case sensitive). Set this to a value of 1.
2. Go into device manager. From the view menu, choose "show hidden devices". Because of the environment variable, you now see all devices not in use.
3. Uninstall any "Universal Serial Bus controllers" not in use (greyed out). Also I uninstalled any storage volumes, storage volume shadow copies, and disk drives also not in use. You should see your offending USB device in one of these areas.
4. STILL DIDNT WORK!! Then:
4.1 Make sure your cellphone detects and see the content of the card. Then, right click MY COMPUTER - Choose Disk Mngmt- Look for the storage device in trouble (you will see that it doesnt have an assigned letter yet) - Add a letter to it - Check and you'll see the drive. (Edit)rocxylemmon- remove the WPD by uninstalling it if it does not go away on it's own then recheck for any new devices and it will change to the drive letter you assigned it too.
Actual Link To The Site - ****://social.technet.microsoft.com/Forums/en/itprovistahardware/thread/24374678-e65d-40fd-9581-62b09c8feeb8
This fixed mine so hope it fixes yours.
Drivers for android / htc / g1 / and SDK are installed on my PC..
USB cord is not broken...
Tried turing USB debugging off..
Title says which rom im using... and i have searched --- and nothing.
When i connect my USB, there isnt even any option in the drop-down to mount usb. If i load in ubuntu, the icon pops up on my g1... and i will click mount, but then an error will come up in ubuntu. Is this an issue within this rom... or is there something i can do to fix this? Thanks in advance...
purplxhaze420 said:
Drivers for android / htc / g1 / and SDK are installed on my PC..
USB cord is not broken...
Tried turing USB debugging off..
Title says which rom im using... and i have searched --- and nothing.
When i connect my USB, there isnt even any option in the drop-down to mount usb. If i load in ubuntu, the icon pops up on my g1... and i will click mount, but then an error will come up in ubuntu. Is this an issue within this rom... or is there something i can do to fix this? Thanks in advance...
Click to expand...
Click to collapse
Have you tried reflashing?
purplxhaze420 said:
Drivers for android / htc / g1 / and SDK are installed on my PC..
USB cord is not broken...
Tried turing USB debugging off..
Title says which rom im using... and i have searched --- and nothing.
When i connect my USB, there isnt even any option in the drop-down to mount usb. If i load in ubuntu, the icon pops up on my g1... and i will click mount, but then an error will come up in ubuntu. Is this an issue within this rom... or is there something i can do to fix this? Thanks in advance...
Click to expand...
Click to collapse
debugging needs to be on and check for a "mount usb" app in the application drawer
reflashed with multiple ROMs -- same issue.
This kind of all started AFTER using "auto-mount" apps. Since then i have reformatted card multiple times, apps are gone.. issue resides. Any help will be appreciated.. thanks
Also, every time I plug into usb on any PC... it pops up as "USB Device Not Recognized." All drivers are installed properly. (even reinstalled for verification)
When plug in and in Ubuntu Live... shows up as Android Phone... but errors out when i click to open for viewing.
oshizzle1991 said:
debugging needs to be on and check for a "mount usb" app in the application drawer
Click to expand...
Click to collapse
Nothing. First thing i tired...
any help wit this would be good
so bump. thanks
Hey, everyone, I tried posting about this in the CM7 general discussion thread, but no one seemed apt to respond.
I think this was a problem that popped up in the 60s or 70s in terms of nightlies, but I'm having it again now since around the 155 mark.
I'm on 160 and when I plug my NC into the USB cable, I no longer get any options to connect for file transfers in the notification area. If anyone could help me out with this, I'd really appreciate it. It's just so perplexing and no one seems be having this issue except me. If it's user-side error, that's fine as well, I'd just like to know how to fix it.
1. When you plugged the NC in, did the PC recognize any "removable" drive?
2. In the notification area, did you see any other indication?
3. You run CM7 off uSD or eMMC?
votinh said:
1. When you plugged the NC in, did the PC recognize any "removable" drive?
2. In the notification area, did you see any other indication?
3. You run CM7 off uSD or eMMC?
Click to expand...
Click to collapse
1. No, nothing comes up.
2. The notification area remains blank.
3. I'm running it off eMMC.
Thanks for taking the time, by the way!
If so, unplug the usb cable then replug in a few times and see what happens.
If still nothing, try to use other usb cable.
Oh, btw, have you had Nookcolotweaks app installed?
I do have Nook Tweaks installed, yes. I'm using the cable that came with the Nook, but I'm not sure I have any other cables around.
Do make sure you check OFF the USB Host feature (reboot and reconnect)
I gave that a try, too, but still nothing. So confusing!
Don't be so hard on yourself.
Let try it on different computer if you have.
Also try difference usb cable.
Last, if nothing works, update latest nightly build
When you disconnect and reconnect the nook in testing/trying to get it recognized... unplug usb cable from computer... its made a difference at times.
I know this sounds basic but in applications-settings ensure you have usb debugging checked. Sometimes when flashing different nightlies, settings change.
Sent from my NookColor using Tapatalk
Thanks again for all the help, everyone! I made sure USB debugging was checked and tried unplugging/replugging the cable, but there's still no notification coming up.
A new development:
I tried connecting it to my Windows PC instead of my Linux and it brought up this message that said it didn't recognize the device. I also tried to get ADB to see it and it can't. Does this information help or am I in trouble here?
Next time, do clearly indicate that you are using Linux or Windows. I'm sure many members here are Linux but still far less support than Windows world.
When I provided those suggestions in previous posts, I meant in Windows.
Anyway, back to your issue.
1. "it didn't recognize the device" because of missing adb usb driver. You need to get it installed first in order to use ADB, however it has nothing to do with your usb mass storage function. For now, you don't need to worry about it just yet.
2. Back to my question before, have you seen any "removable" on the PC (Windows)
Along with USB Host uncheck, if still having problem, I would suggest you either downgrade to the earlier versions or wait until tomorrow and update with another nightly build.
Good luck
I have the ADB drivers installed in Windows, as far as I know. I've used it before.
I typed "adb devices" into the prompt and it doesn't see the NC at all. Since one of the nightlies seems to be what prompted this sudden change in connectivity, I guess I'll just hope that one of the new ones can fix it. Thanks again.
Also, Windows doesn't show anything "removable" except for my external HD.
Try to disable usb debugging as you can still use ADB over wifi. This should always put the device to usb storage mode when connected.
arda99 said:
Try to disable usb debugging as you can still use ADB over wifi. This should always put the device to usb storage mode when connected.
Click to expand...
Click to collapse
I tried this out and even ADB wireless can't connect to my device. I even re-installed the ADB drivers in Windows to be sure the problem wasn't on that end.
junkrobot said:
I tried this out and even ADB wireless can't connect to my device. I even re-installed the ADB drivers in Windows to be sure the problem wasn't on that end.
Click to expand...
Click to collapse
If you're using ADB wireless, no need to install any driver on Windows PC, you just need 2 files: adb.exe and AdbWinApi.dll, to connect to Android device.
If you've installed ADB drivers, you might want to remove it as this might mess up usb storage.
arda99 said:
If you're using ADB wireless, no need to install any driver on Windows PC, you just need 2 files: adb.exe and AdbWinApi.dll, to connect to Android device.
Click to expand...
Click to collapse
Alrighty. I have those two. I've connected my NC to ADB both wirelessly and and with the cable in the past, so this should all be straightforward anyhow. It just plain refuses to cooperate.
Go to the Marketplace and download "Nook Color UMS" app. Follow instructions and it will mount properly. I had the same issue used it and it mounts proper through the app.
I have two Nexus 6s, one completely stock and one that I just upgraded to Marshmallow. I downloaded sdk and minimal adb and fastboot today in order to install marshmallow. I just plugged in my completely stock unmodified Nexus 6 into my computer to get my photos off my stock Nexus before I send it back to amazon and although the phone charges, nothing pops up for it being a storage device, I switched it between MTP and PTP on the phone but it does nothing, the phone does not show up, same goes for the Nexus 6 that has marshmallow on it, also switched that to MTP. My computer detects the phone because it allows me to eject it from usb but that is about it. Anything else I can try? trying to get pics off the old Nexus before I send it back.
PolishDude said:
I have two Nexus 6s, one completely stock and one that I just upgraded to Marshmallow. I downloaded sdk and minimal adb and fastboot today in order to install marshmallow. I just plugged in my completely stock unmodified Nexus 6 into my computer to get my photos off my stock Nexus before I send it back to amazon and although the phone charges, nothing pops up for it being a storage device, I switched it between MTP and PTP on the phone but it does nothing, the phone does not show up, same goes for the Nexus 6 that has marshmallow on it, also switched that to MTP. My computer detects the phone because it allows me to eject it from usb but that is about it. Anything else I can try? trying to get pics off the old Nexus before I send it back.
Click to expand...
Click to collapse
btw adb sees the phone no problem
I have the same problem. Windows seems to recognize the phone, but it displays no content when I try to browse files.
Just did a clean flash of the factory image.
EDIT:
Ok, I'm an idiot... here's the solution:
http://forum.xda-developers.com/showpost.php?p=63151023&postcount=2
Yadao said:
I have the same problem. Windows seems to recognize the phone, but it displays no content when I try to browse files.
Just did a clean flash of the factory image.
EDIT:
Ok, I'm an idiot... here's the solution:
http://forum.xda-developers.com/showpost.php?p=63151023&postcount=2
Click to expand...
Click to collapse
nope that does nothing on my phone, both are set correctly at MTP or PTP, nothing works
BTW when I eject the USB it lists it as "android adb interface" I have a feeling that is why it is not showing up?
Mine just says MTP when I eject it. Did you try toggling USB debugging on and off?
Yadao said:
Mine just says MTP when I eject it. Did you try toggling USB debugging on and off?
Click to expand...
Click to collapse
I deleted the adb driver and that fixed the issue but that can't be the correct way because I think it would be pointless to have to install and delete the adb driver each time I want to use it? I knew it was more computer related than phone related but what is the correct way to make the phone work with a adb driver installed on the computer?
PolishDude said:
I deleted the adb driver and that fixed the issue but that can't be the correct way because I think it would be pointless to have to install and delete the adb driver each time I want to use it? I knew it was more computer related than phone related but what is the correct way to make the phone work with a adb driver installed on the computer?
Click to expand...
Click to collapse
I honestly don't know. I've always had mixed results. Sometimes it would work automatically, sometimes I'd have to manually install the google drivers when the phone is in the bootloader.
Had the same "problem", to fix it and for windows to show the contents of the phone, you just need to pull down the top drawer and select mtp file transfer from the USB options. It is set for " charge only" as default. Try it out!
Sent from my Nexus 6 using Tapatalk
Pull down the status bar and set charge only to transfer files
Tek-Toyz said:
Had the same "problem", to fix it and for windows to show the contents of the phone, you just need to pull down the top drawer and select mtp file transfer from the USB options. It is set for " charge only" as default. Try it out!
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yasharkhan said:
Pull down the status bar and set charge only to transfer files
Click to expand...
Click to collapse
Exactly: it is not a problem, but just a new way to manage USB connections. You just have to pull down the status bar and choose one of the USB options for your Nexus 6
lol you guys aren't understanding, I did that and it did not fix the issue. The phone was still not recognized as a storage device. I also tried a Nexus 6 that was on 5.1.1 which does not have the charging only option in the drawer and it also was not recognized but once I deleted the adb driver from my computer, my computer saw both as storage devices when I put them into MTP mode
Go into developer settings
Make sure checked Debugging on
Then Scroll down
Look for MTP CHange it to something else in the settings
then back MTP Your computer will then see it it bug in 6.0
Follow my Video
https://youtu.be/At0auL6CQeg
--- SOLVED see first post second page! ---
Hello XDA,
I am only able to read data on the phone when connected via USB on windows. On the phone itself I can change whatever I want ( Via ES-explorer for example) But in windows file explorer I can't. It will not tell me that I do not have proper writing rights, but instead just decides to freeze for 10 minutes everytime I try to make a file change, to eventually give me a beautiful
"windows explorer is not responding" pop-up
What I have tried :
-Rebooting,
-Reinstalling USB drivers,
-Switching USB debugging on and off,
-Reinstalling root,
-Installing the newest Oxygen OS update from February,
-used different cables (also an old micro USB with adapter) And nothing works.
This sucks because I was just trying to change my photography workflow from being Desktop based to being Android based..
Any suggestions ?
Greetings,
Thijs
www.instagram.com/thi_js
Edits: Clarify issue
i have the same problem be great to find a solution
Did you maybe noticed when this problem occurs to you? I know that one months ago it just did work. Should I reinstall Windows completely?
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
lorfo123 said:
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
Click to expand...
Click to collapse
How should one file a bug-report for windows 10 then, this can't be something that shouldn't keep unnoticed by them.
Did rolling back fix something for you, and how did you do so?
I've checked another Windows 10 computer which hasn't been updated and it recognises my one plus 3T so if you Google / YouTube windows 10 roll back it should work
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
1asbak1 said:
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
Click to expand...
Click to collapse
The only other thing I could suggest is using a virtual machine to run win 7
Did you try back usb ports?. My pc with windows 10 fails with the front ports.
Solution
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
ayush2901 said:
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
Click to expand...
Click to collapse
Which version of TWRP are you running? The thing is that If I afterward can't restore the data via USB haha, then the whole point of backing it up seems invalid
lorfo123 said:
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
Click to expand...
Click to collapse
This actually worked. Wauw.
Had to reboot a view times in order to get it in effect, nonetheless, THANKS let the creativity start again
Really,My A** is burnt while my phone showing messages to update,,, Fiunally donw..Thanks a lot...!!
super it works
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
picollo7 said:
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
Click to expand...
Click to collapse
When you connect the phone to pc do you get a notification on your phone with the USB options?
DirkGently said:
When you connect the phone to pc do you get a notification on your phone with the USB options?
Click to expand...
Click to collapse
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
picollo7 said:
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
Click to expand...
Click to collapse
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
DirkGently said:
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
Click to expand...
Click to collapse
Haha, yeah. Does anyone have links to the drivers that work for them?