i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
I just got the ms cab file make but it doesnt make it so that it installs automatically. I want to make it so that it installs to the windows directory.
Can somebody share some tips?
What do you mean it doesnt install automatically? or it doesnt install where you expect it to?
Give us a little more to go on & people will have a better chance of giving you a useful answer
~Beeble
I am very fussy with my toys, and like to have what i need / use and not everything else that others have loaded, this is nice, but i dont end up using the programmes, so they annoy me as take up space
If i install a lite rom, with no prgrammes but a recent version, i take it i can then load the programmes i use / want and basically build my own device?
or is it easier to downloaded a kitchen and the programmes and make my own rom? i have currently got duttys 1.7, seemed to get high reviews, and looks good, but for me it doesnt feel right, some icons are not crisp, and i wont use, so thats annoying me.
then i have folders for apps and media etc, i loaded my programmes onto the mem card and after installing the new rom the proggies were still on the mem card (didnt know if would get wiped) so i copied the shortcuts to the programmes folder, but i cant copy to the indivual folders that they belong in.
where do i get the official programmes from if i want to build my own rom? like or the important / required stuff? or is that all included and the kitchen helps with adding extras?
its far easier to install a lite rom and then start adding your own applications. which, by the way, cannot be done by simply adding the shortcuts from the microSD to the Program Files directory. you need to have the .cab file for every program you want to install.
if you want to cook your own rom, you need to read about cooking and kitchen essentials. basically, you may find in there most programs you may want to include in your rom. also, there is a description on how to add other programs of your liking to the kitchen. there used to be a kitchen guide very good detailed around here, but cant seem to find it anymore.
i only added the shortcuts as i had originally installed my applications on to the storage card, so i guess all the nessassary files were there, and i was able to add a shortcut to the programmes folder for access from the start menu.
i think i`ll go with a light rom, and install programmes i want / need.
if that doesnt work, then i can try making one myself.
i am worried i will forget to install something important, will a lite rom include everything needed for the phone to work as it should? (all the touch functions, and camera, album, texts, signal, be able to play media files when install programmes for it etc)?
Hi to all! Im preparing my first rom, and i have problems
Im using the Visual Kitchen and my problem is that, y prepared the cabs i want to install like a Kvosky Package, and y edit de config_ap, when it is customizing, it says : Installing : Program.cab , but when it reboots, the programs arent installed (I have to install them manually form the folder windows) and it doesnt created me the shortcuts, from the rhodium calculator, audio booster ...
If i could install well the cabs i could make a cab with the shortcurts. any idea of what should i do?
reybrujo92 said:
Hi to all! Im preparing my first rom, and i have problems
Im using the Visual Kitchen and my problem is that, y prepared the cabs i want to install like a Kvosky Package, and y edit de config_ap, when it is customizing, it says : Installing : Program.cab , but when it reboots, the programs arent installed (I have to install them manually form the folder windows) and it doesnt created me the shortcuts, from the rhodium calculator, audio booster ...
If i could install well the cabs i could make a cab with the shortcurts. any idea of what should i do?
Click to expand...
Click to collapse
Tried the Rhodium packages I posted in my kitchen thread:
http://forum.xda-developers.com/showthread.php?t=526738
Place the downloaded folder in EXT\SHARED\ and select/deselect the packages you like to use from visualkitchen.
No need to add them in config_AP.txt
I have tyou packages installed, and it works fine, but, i dont know why, y add the packages form calculator, or audio bosster, and then in programs they dont appear
And ther otre problem with config_ap is adding mi cabs, for expample, no data
Sorry for my bad english
Hi there,
Everytime after I used/ installed a new, fresh made ROM on my Kaiser, I have to install the same software, again and again..... like TomTom, Coreplayer, SKTools and so on.... That takes time and is soooo boring.
Is there a solution to make one exe file that includs all the software I want to install, like a batch file...
Is this possible and if it is, how can I make it and adjust it when I want to add or remove software...
Who can help me with this issue?
Greets from Holland,
SASHIMI will install software to the loaction you wish, install your reg edits & more