When I go to boot android from my SD card it won't load. I run Haret.exe and then the linux boot screen comes up, but then i get this message at the bottom:
Kernel panic - not syncing attempted to kill init!
2.165865 Rebooting in 3 seconds.
After this last line it stays frozen forever. I am using Myn's latest Warm Donut, and yes I have all the files on my SD cards root, and it is formatted to FAT. I haven't taken anything out of the files that I downloaded. Any help would be greatly appreciated.
Thanks for all the great work
Same thing happened to me
I used to do this kind of stuff on my Kaiser. I don't know what is wrong. But, I get the exact same problem.
HELP same is happening to me.
I get the same message on my sprint Touch.
Kernel panic - not syncing attempted to kill init!
2.165865 Rebooting in 3 seconds.
does anyone know the solution to this. I tried Myn with same freeze. Android 1.5 worked but then it shuts down after 5 min.
All other builds give me the same message and then FREEZE.
Thanks for your help.
2.165850 Rebooting in 3 seconds
Please help!
I am seeing many others with this same issue when booting from SD when I searched for "attempted to kill init!" under Vogue CDMA.
Kernel panic - not syncing g: attempted to kill init!
2.165850 Rebooting in 3 seconds
After that it just stays frozen. Any help would be great appreciated.
I had this exact same problem yesterday and I finally solved it after messing with the phone all morning.
I am using the verizon version of the phone btw and I am kind of a newb to this whole process.
The boot problem ceased after I installed windows mobile 6.1. I can't post the link because I am new to this forum, but it was a verizon package of windows 6.1 that included a radio update. I think the reason it fixed the boot problem was because it updated the radio.
Please note that by doing this I had to call verizon and re-activate my phone on their network (while having windows mobile 6.1 installed on the phone.)
After installing windows mobile 6.1 on the phone (with included radio update), I was able to flash to Android with no problems and no longer got the freeze up at "rebooting in 3 seconds.."
Hope this helps!
2.165850 Rebooting in 3 seconds
zmanb said:
I had this exact same problem yesterday and I finally solved it after messing with the phone all morning.
I am using the verizon version of the phone btw and I am kind of a newb to this whole process.
The boot problem ceased after I installed windows mobile 6.1. I can't post the link because I am new to this forum, but it was a verizon package of windows 6.1 that included a radio update. I think the reason it fixed the boot problem was because it updated the radio.
Please note that by doing this I had to call verizon and re-activate my phone on their network (while having windows mobile 6.1 installed on the phone.)
After installing windows mobile 6.1 on the phone (with included radio update), I was able to flash to Android with no problems and no longer got the freeze up at "rebooting in 3 seconds.."
Hope this helps!
Click to expand...
Click to collapse
Thanks zmanb!
I got it to work after updating my ROM to WM6.1 with new Radio from HTC web at: htc.com/us/support/touch-sprint/downloads#133
Thanks again for your reply. I am now running : Myn’s Warm Donut - [RLS 5 - 04/24/2010] -Added X10 & Teds Espresso Themes 04/26
Use the sprint one, it unlock gps as well.
Related
I have a really annoying problem with my P4350.
Before the official Update i was running HERALD_WM6.0_4.12.07.06.PDAVIET with 4 MB Pagepool.
it worked really nice and i had never any problem with it.
Now i updated to the official HTC WM6 Rom. First i also installed the OS from PDAVIET over the Official one. But then i encountered after a little time the Bootloop of death.
it was always rebooting, and removing of the microsd did not really helped at the bootloop it was only stopping at the bootscreen and hang there forever.
the only chance was a Hardreset. After that i installed only the official Rom from HTC from the Bootloader. Now i am running only the official WM6 Rom and it is also rebooting after some time. i did not installed anything that i didnt installed also in the original WM5 Rom, and SD-Card removing also dont help.
After some Hardresets i installed a Safemode tool.
now i encountered another Bootloop and i can enter the Safemode. There i sometimes disable a Homeplugin, then it boot again. But not for long, it will hang again in the Bootloop. I have no idea wath File/Program is doing this thing and i have not many applications that boot at startup. It is also happening if i have no Home-Plugins enabled (from Safemode disabled).
can someone help me at this, or is it only possible that i downgrade or never install any application(wath is also no guarantee that it will not again enter the bootloop)
(sorry for every error in my text because i am German)
How long do you wait before giving up when you pull out the SD card? When I installed the home screen I got the continuous reboot and when I took out the sd card it stayed at the green windows mobile screen for about 2-3 minutes before booting into the home screen.
Also, have you tried this: http://www.modaco.com/Continuous-reboots-t256186.html ?
thanks for your help.
But i already waitet for way more than 3 minutes. i think it was ~ a half hour.
I already tried to rename the OMAP850_SDHC.dll but with no luck. The File is in the Rom and it is not alowed to rename this File. (if i look at the Settings from Resco Explorer ROM is activated)
my OMAP850_SDHC.dll is 46.38 kB big and from 02.07.07 5:44 if this information can help.
at the moment i try to avoid a reboot from my device...
I think i found the troublemaker.
I deleted a windows-design that i liked and used in all Rom-versions, and since i deleted the file it seems that the reboot-problem is solved.
If my Herald will hang again in a reboot-loop, i will write here again.
so long... thanks for the help.
Hi all,
I have been visiting these forums for 2 years now and have downloaded some great tools and ROMs to enhance my Trinity, however something all of a sudden has gone very wrong!
I upgraded to WM6.1 Elegance edition about 3/4 months ago, CID unlocked the phone about a month ago and everything has been working like a dream.
However just today, I attempted to turn the volume down on my phone during a meeting (I always forget to normally!) and there was no display. After few battery resets, again no display. It starts up, loads the the Elegance splash screens and then hangs on the screen before when the OS should appear.
My decision was to flash the ROM again. I cant flash using Activesync as it wont pick up on the hung screen, so I started the bootloader and got as far as 1% of the flash and it will restart. So I tried the SD Card method when resulted in a "loading" screen appearing for a few seconds and then it goes back to the standard bootloader and displayed a 00068002 error.
I am out of ideas, I hear mtty.exe is a good program for this kind of thing, but what I want to know is if this is fixable or if I should give up!
I have been working on this since 2pm today none stop!
Can any of you guys give me any suggestions please?!?!?
Kind regards,
Jonathan
Should be a cinch
Did you SPL the Phone before flashing roms?
If you put the phone into the bootloader mode The RGB screen and kill of activesync you should be able to run one of the flash update programs.
If I have flashing problems its usually Active sync so I kill it then run the flash program.
I've got a sneaky suspision your battery might be causing the problem.
Hi there, thanks for the reply. As I was new to upgrading I havent used SPL on the phone before flashing the ROMS. I did use an unlock tool recently as i wanted to try a different network SIM to see if it worked when I was in South America, so the phone is unlocked to all networks. Are you saying if I SPL now it should sort the problem out? If so how do I do this withour ActiveSync working - can you use SD?
Another thing I failed to mention was that when I start an upgrade and it follows all the steps, it doesnt say the current ROM on the screen where you press update ROM. It just gives the name of the new ROM and the current one is left blank.
I have disabled Active Sync before attempting the update. It seems to go through fine and then the phone restarts wafter 1% of the update.
What makes you think it is the battery? I am happy to spend under 20 pound on ebay if you think it will fix the issue!
try unbrick.bat.......my trinity was also stuck.......unbrick.bat save my day....
The same happened to me several time....I could not find a solution other than this one:
1. Flash the official HTC ROM.
2. Flash the required ROM then.
it works for my TrinTy.
After long last, I've finally updated the WM6.1 Clean Developer Edition and have fixed up almost all the problems you guys had with the original.
Changes from original 1.0 version:
Portrait Camera now working
MMS 4.0 is included with basic MMS settings
Custom splash screen!
Some other bugs I can't remember...
User Customization 2.0 - You'll really like this if you have a microSD card!
Installation:
Installation is now completely automated. If you are currently running the official T-Mobile ROM, please run the CID Unlocker.exe that is included.
Once you are CID Unlocked, run the Windows Mobile 6.1.exe program.
Done!
If at any time you want to go back to the T-Mobile ROM because of an error flashing or whatever, you will need to turn your phone on in bootloader mode. To do this, hold down the camera button and then press and release the power button while still holding the camera button down. Your phone should go to a screen with red,green, and blue bars. Plug it in to your computer now and run the T-Mobile Update from their site.
Download link: http://www.sendspace.com/file/vxxsq3
Rapidshare mirror: http://rapidshare.com/files/133831473/Clean_Developer_Edition_Revision_1.1.rar.html
Note: The T-Mobile Edition BETA 2 will be released sometime later today or tomorrow for those who have been waiting for an update since the last.
works great so far! thanks again for the updates
Beautiful, I love for your work .
did you add rickwyatt fix for the interface
edit
after trying to download this 10 times already im kinda pist
upload it somwhare else it stops like half way
huh?
okay i must first apologize for my ignorance, as i am very new to this. first what is "CID unlocked"? Also, are there still bugs being worked out of this rom? i previously had a dash ( HTC Excalibur ) and used a 6.1 rom from an xda member and really liked it. T-mobile has not issued a release date for wm 6.1 and frankly i am sick of waiting! will this rom work the same as the previous rom i used for my dash? thank you ahead of time for any answers and help you may be able to provide me with.
Everything works perfect! The only thing I have not tried is mms but I don't mms often.
Thank you for all your hard work!
Noted BUGS
#####
#BUGS
#####
1.) To upgrade from Dev 1.0 to 1.1, I for some reason had to cid unlock. For some reason, every time I tried to flash the Juno, I kept getting an invalid certificate message.
2.) Microsoft's Getting Started App is missing.
3.) After LiveSearch is installed, when a user tries to exit the application they would encounter a missing resource error. (Note: This never occured in the 1.0 version. I'm currently googeling for a solution).
-----
That's all I could find. Otherwise, great ROM. I've noticed it works a bit faster then the 1.0 Rom, what changes did you make?
I also upgraded for dev1.0 to 1.1 and did not have to cid unlock the exe worked great
live search I have no problems with and get no error win exiting
getting started is missing and looked in the windows folder I did not see it there so I think he removed it but who needs it I did have a died shortcut in the all programs for it but after adding more programs to it it is gone
the battery on the settings slide still needs to be edited in the reg to open
still have to try User Customization
but all and all works great
hopefuly need4speed can make a cab to fix these bugs brcouse im kinda sick of flashing my phone
im also waiting for a mirror
ahhh victory
I had some bugs that didnt bother me so much on 1.0, so I am excited for an update.
And I will never get sick of flashing my phone MU HA HA HAhahaha!
When I have it up and running I will post notes of usage ND4, Thank you so much for this.
kron2 said:
I also upgraded for dev1.0 to 1.1 and did not have to cid unlock the exe worked great
live search I have no problems with and get no error win exiting
getting started is missing and looked in the windows folder I did not see it there so I think he removed it but who needs it I did have a died shortcut in the all programs for it but after adding more programs to it it is gone
the battery on the settings slide still needs to be edited in the reg to open
still have to try User Customization
but all and all works great
Click to expand...
Click to collapse
Okay, I'll reflash my phone, and see if i have any problems.
Problem with install
Hi All
I have tried several times to follow the steps to upgrade to this Windows Mobile 6.1 using ND4SPD's file from both download sites. After running the unlock procedure, when I start the Windows Mobile 6.1.exe installation proceeds to just after the status bar comes up on the phone, Then, I get an error that the image file is corrupted. The phone reboots back to Windows Mobile 6 Standard.
What could the problem be?
Tim
What exactly does user customization 2.0 do?
timtillman said:
Hi All
I have tried several times to follow the steps to upgrade to this Windows Mobile 6.1 using ND4SPD's file from both download sites. After running the unlock procedure, when I start the Windows Mobile 6.1.exe installation proceeds to just after the status bar comes up on the phone, Then, I get an error that the image file is corrupted. The phone reboots back to Windows Mobile 6 Standard.
What could the problem be?
Tim
Click to expand...
Click to collapse
Dose your phone turn white after running CIDunlocker.exe? Also u have to remove storage card and restart phone before anything.
This rom works in gene p3401?
kormanb1123 said:
Dose your phone turn white after running CIDunlocker.exe? Also u have to remove storage card and restart phone before anything.
Click to expand...
Click to collapse
I just tried without the memory card.
Yes it turns white. The unlock util reports success.
I reboot the phone, start the update util, the screen gets red green and blue bars.
At 2%, the update util shuts down with:
"ERROR [270]: Update Error"
"The image file is corrupted. Please check your update utility."
The phone then reboots.
So, what do you think ?
Tim
@tech_hardman: this will NOT run on the gene. It is specifically meant for the htc juno. If you try it, it might brick your phone.
@guitarkid6920: UC 2.0 basically allows you to have all of your settings, programs, etc installed automatically after the rom is installed so you don't have to work on it every time you flash a new rom.
@timtillman: Make sure that after your phone gets the app unlock that your phone restarts. Physically disconnect from your computer and wait for it to restart after the app unlock. It should work.
ND4SPD said:
After long last, I've finally updated the WM6.1 Clean Developer Edition and have fixed up almost all the problems you guys had with the original.
Changes from original 1.0 version:
Portrait Camera now working
MMS 4.0 is included with basic MMS settings
Custom splash screen!
Some other bugs I can't remember...
User Customization 2.0 - You'll really like this if you have a microSD card!
Installation:
Installation is now completely automated. If you are currently running the official T-Mobile ROM, please run the CID Unlocker.exe that is included.
Once you are CID Unlocked, run the Windows Mobile 6.1.exe program.
Done!
Download link: http://www.sendspace.com/file/vxxsq3
Rapidshare mirror: http://rapidshare.com/files/133831473/Clean_Developer_Edition_Revision_1.1.rar.html
Note: The T-Mobile Edition BETA 2 will be released sometime later today or tomorrow for those who have been waiting for an update since the last.
Click to expand...
Click to collapse
Sounds great! By the way I'm newbie here and can you help me to do this step by step coz i'm little scared to try. I'm with the original 6.0 rom and if ever error happens can you pls add also the procedure to bring it back to original rom, tnx.
Sure thing. I'll update the post right now.
Hi,
I got given a couple of Treo 750 phones. Both on the Optus Australian Network so I scratched around for days and found the upgrade software. Shows update 2.27
1st one went perfect.
2nd one on same computer got through copying files and executing update and stalled at the start of completing update.
I got the Windows mobile screen show and it just was not loading for ages. Previous one loaded and then asked for input of Date, touch screen settings etc.
The installer can be re run but says no USB connection at the moment.
I have done a hard reset and get the palm display then locks on the Windows Mobile screen.
I saw procedures to use the Mini SD card but the cards I have won't work in any treo, they are not SDHC type but standard 2G ones.
I next found the recovery tool but holding the left lower button and then hitting reset did not work but does work on my good phone where it shows the coloured bars and SPL....
The left button is a bit dodgy so I suspect it may be faulty. Is there anything else I can try?
EDIT: Ok I pulled apart the phone, looks like it had a hard life as broken case around two screws and they would not unscrew easily. Found the tiny button had dry solder joints. Fixed that up and was able to recover using the reset proceedure.
Phone now working.
could you explain in more detail what you did. thanks man
webafile said:
could you explain in more detail what you did. thanks man
Click to expand...
Click to collapse
What would you like to know?
Once I physicaly repaired the phone as indicated in the edit I was able to hold the left hand button (which was faulty) and the reset at the same time that allowed me to get into the SPL mode and recover the phone.
I understand it very little and most posts on these forums are over my head.
I would like windows 6.1 but there is so much information that seems to conflict that I don't know I am game since it is now working on an official 6.0 Optus version.
I am happy to help but if you can maybe tell me where you are at the moment and what you want to acheive and what you have tried I hope I can fill in the gaps for you.
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
thanks man
webafile said:
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
Click to expand...
Click to collapse
Ok to start with what country are you in and what telco were you with eg Vodafone etc as you will need that as a start.
USA and im with AT&A
Try the method describe in the thread below - Mine work
Hi, you might want to try this method
Follow it one by one and do not skip a step
http://forum.xda-developers.com/showthread.php?t=460783
I just did mine last Saturday (it was a Vodafone phone)
AT&T should be easier since the Windows 6 ROM is easier to get
If you'd like to update to WM 6.1, you should upgrade first to WM 6
Something i read about the radio not working to full capacity if you upgrade straight to 6.1
As for the WM 6 ROM, i'm sure you can find it
Good luck
Hi All,
I have a Treo 750 and it WAS running WM 6.0 Professional (OFFICIAL) and I got it onto the phone and then tried to install WM 6.5 and then I downgraded to 5.0 and tried to update back to 6 and it bricked my treo, any of you wonderful xda ppl have any solution?
Also, I have tried installing the ROM again (via SD updater) and it looks like this:
SPLASH1 OK
BOOTLOAD OK
GSM OK
Micro P OK
EXTROM FAIL
OS
Update Terminate
UPDATE FAIL
I cant install the windows installer one as WMDC 6.1 or ActiveSync 4.5 WILL NOT show the device up on the computer. I have Windows Vista Home Basic, and when I tried MTTY, the only ports I get are COM1, COM2, and COM3. I can't get the usb to show up. Even with MTTY 0.01 when I got the USB connection, it would not open. Is it Vista? Or am I not doing it right? ANY HELP WOULD BE APPRECIATED TO GET MY POOR TREO BACK!!!!!!!!!
Thanks
~Mike
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
simunlocktreo said:
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
Click to expand...
Click to collapse
Is this universal (i.e. Hermes/BA/Trinity) or just for the Treo 750. I think what bricked it in the first place was installing a custom rom by veisen (WM 6.5)
~Mike
Didnt Work
That one thing didn't work. It keeps coming up ERROR 226: FLASH WRITE ERROR Anything else???
~Mike
Hi guys,
I have a weird problem.
As of recently two days ago, my tilt won't take any flashes anymore. I believe with was caused by an action of mine which I tried flashing android from SD to NAND.
Here are the symptoms:
1) After a failed attempt at loading the Android Kernel, I installed the stock HTC ROM (Kaiser_HTC_ASIA_HK_WWE_3.34.721.2)
2) The stock rom flash worked, but any subsequent flash do not work
3) When trying to flash (either from Active Sync or SD Card) it gets stuck at 0%
Current state is as follows:
1) Phone boots up normally with stock rom
2) I can get into Bootloader mode no problem
3) When trying to flash it doesn't work
I have tried several steps in order to recover.
1) Tried to flash Stock rom again (Faillure)
2) Tried to flash HardSPL again (Faillure)
3) Tried MTTY 1.42 (Don't know if Success or Faillure) - I have attached the screenshot below
I have been successful in flashing multiple custom ROMs before, but idiot me wanted to try the android and now I messed my phone up. I guess it's true what they say: "If it ain't broke, don't fix it!"
Anyways...
So it seems to me, the connection is getting done but nothing wants to be pushed.
Here are my credentials:
PC:
XP Service Pack 2
Phone:
ROM Version: 3.34.721.2WWE
ROM Date: 09/30/08
Radio Version: 1.70.19.09
Protocol Version: 25.83.40.02H
HardSPL 3.34
So my question is, do you guys know how to get my Kaiser working again?
Do you recommend in attempting Android on Kaiser again or leave it be?
Any help is greatly appreciated in clarifying this out.
Dave.
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
tsiftis21 said:
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
Click to expand...
Click to collapse
You can just dont put http or wrap it in code and it's due to limitation on accounts to prohibit spam untill you reach a ceratain ammount of posts.
Screenshots
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
tsiftis21 said:
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
Click to expand...
Click to collapse
remember to take out your sim and sd card while flashing.
Mr. Clown said:
remember to take out your sim and sd card while flashing.
Click to expand...
Click to collapse
I had tried without the sd card, but I had forgotten to take out the sim card.
I tried without the SIM card and the same result is present. Won't go past 0%.
Any other ideas?
Does any one have any ideas how I can get my tilt up and running again? Any help would be greatly appreciated.
Thank you
I get the same issue...
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
tstaddon said:
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
Click to expand...
Click to collapse
I had this on my tp.
My usb was dying out, i ended up switching my tp with the one of my brother cuz my brother got a galaxy S.
Try if active sync works properly and keeps connected for 15 mins or more.
My connection kept getting lost untill eventually no pc would be able to reconize my phone.