Related
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
Hi guys!
I've just upgraded my phone from wm5 to wm6.1 but i encountered problem regarding with the wifi. my wizard can't conect to any wifi but it can detect any presence of wifi around. i've tried to hard reset it but the problem remains the same. i don't know what to do.
and also, upon upgrading, my phone lost the voice tag(voice dialer) program. i want to have it back because i just bought a bluetooth headset that supports voice dialer.
thank you in advance!
raevinor said:
Hi guys!
I've just upgraded my phone from wm5 to wm6.1 but i encountered problem regarding with the wifi. my wizard can't conect to any wifi but it can detect any presence of wifi around. i've tried to hard reset it but the problem remains the same. i don't know what to do.
and also, upon upgrading, my phone lost the voice tag(voice dialer) program. i want to have it back because i just bought a bluetooth headset that supports voice dialer.
thank you in advance!
Click to expand...
Click to collapse
The wifi might be a problem of authorizations, MAC filtering, etc...
Upon upgrading your phone did NOT lose voice tag, instead the chef who cooked the rom you're using decided not to include it. Either you get the program and install it or install a rom that has it
I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz
hey ya'll, (may be wrong place for this, so my bad) -- I just recently had to hard reset because I installed kaiser notifications and when ever I'd get a missed call, it never stop playing the missed call sound...
so after hard resetting, I now get the 2 arrows with an X for the GPRS/EDGE/3G icon -- I've searched around and haven't found a fix (I tried deleting my connection settings and re-entering them, but doesn't work)
tia for any suggestions!
jrinco11 said:
hey ya'll, (may be wrong place for this, so my bad) -- I just recently had to hard reset because I installed kaiser notifications and when ever I'd get a missed call, it never stop playing the missed call sound...
so after hard resetting, I now get the 2 arrows with an X for the GPRS/EDGE/3G icon -- I've searched around and haven't found a fix (I tried deleting my connection settings and re-entering them, but doesn't work)
tia for any suggestions!
Click to expand...
Click to collapse
I was told the fix for this yesterday and made a CAB for it.
It's a problem with Diamond/Raphael based ROMs.
Ta
Dave
ah, thanks! however, I tried it and it didn't fix it (and I did a soft reset afterwards too)
jrinco11 said:
ah, thanks! however, I tried it and it didn't fix it (and I did a soft reset afterwards too)
Click to expand...
Click to collapse
You should add the following key to the registry:
HKLM\Software\Microsoft\Shell\Taskbar
Add a DWORD called LegacyGprsNotification = 1.
This should work after a soft reset.
I not, you'll have to try another ROM. It is a problem with the newer ROM ports.
I know raiisak has fixed in his new beta ROM.
Ta
Dave
DaveShaw said:
You should add the following key to the registry:
HKLM\Software\Microsoft\Shell\Taskbar
Add a DWORD called LegacyGprsNotification = 1.
This should work after a soft reset.
I not, you'll have to try another ROM. It is a problem with the newer ROM ports.
I know raiisak has fixed in his new beta ROM.
Ta
Dave
Click to expand...
Click to collapse
unfortunately still doesn't work -- And I've been using L29 v9 for a while now, and the gprs icon never had an issue -- it's just after I now did hard reset that this started happening
doh, just found out what it was! I had installed a different dialer which upon uninstalling it fixed my issue.... haha
thanks for your help though, I appreciate it!
Hi everyone..
I am a somewhat profiecient Tilt user.. had a few windows mobile phones before.. and had my tilt over a year.. I never had any problems with the WM 6.0 rom so I never upgraded it.... But now I ahve a problem... Today my GPS wasn;t locking on so I reset the phone, and as usualy it fixed the problem.. but now my messaging (and email) won;t work...
I have the HTC Home Installed (been installed a long time) and I use the buttons on the clock screen on it to access my MMS and Email... I went to send a txt and it did nothing.. I thought hte phone was froze.. but other stuff works.. I tried email next.. same problem... It also says the MSVC has encountered a problem and that is not working either.. it all happened at the same time....
The real problem is I have my phone EXACTLY how I wanted it.. with this tweek and that tweek... This program and that program.. this setting & that setting... sigh... I have an odd provider (Einstein PCS) so I had to set up all custom MMS, Email, Internet, and other setting that took a long time to get them all just "right"... I thought the SD card may have went, but other software that I know is on the SD card runs fine (including tomtom)... Any suggestions from anyone before I do hard reset? Please.. I don;t want to have to redo everything...
Retrace your steps
Hi
I have found that when something stops working after installing new software, if I uninstall any software, in the reverse order it was installed, this usually restores functionality. Uninstalling one piece of software at a time and running trials in between uninstallations usually helps to identify the culprit. If you haven't actually installed new software to co-inside with the failure then this advice is no good for you.
For future reference I would recommend using Sprite Backup (I think that the latest version is 6.5 and can be found on their website). With this software you can make a back up of your existing configuration prior to installing any new software. Then, if anything goes wrong you can just hard reset and run the backup file (stored as an .exe file) from the storage card and you'll get back to exactly where you were before the install.
Hope all that helps.
Cheers
andrew-in-woking
Thanks for the advice but I did nto install anything.... I will get that sprite backup though for future use... thank you.... What I did find this morning is this...
http://www.htcwiki.com/thread/107262...&maxResults=20
It seems many other people have had MOST of the same problem... When I followed the directions and deleted the inbox om my SD card, it fixed everything... even the Microsoft Voice command.. no idea how they are related, but it must be.... The only problem is that now after doing all this research on new ROMs, I found one I want to try... now I gotta decide if I want to go through all that work if I don;t have to... I think I will do the sprite backup.. download a default at&T 6.0 rom if I can find one.. then TRY The new rom.. if I hate it.. install the default rom and resotre my settings.. Thansk for you help though
Teej53214 said:
Hi everyone..
I am a somewhat profiecient Tilt user.. had a few windows mobile phones before.. and had my tilt over a year.. I never had any problems with the WM 6.0 rom so I never upgraded it.... But now I ahve a problem... Today my GPS wasn;t locking on so I reset the phone, and as usualy it fixed the problem.. but now my messaging (and email) won;t work...
I have the HTC Home Installed (been installed a long time) and I use the buttons on the clock screen on it to access my MMS and Email... I went to send a txt and it did nothing.. I thought hte phone was froze.. but other stuff works.. I tried email next.. same problem... It also says the MSVC has encountered a problem and that is not working either.. it all happened at the same time....
The real problem is I have my phone EXACTLY how I wanted it.. with this tweek and that tweek... This program and that program.. this setting & that setting... sigh... I have an odd provider (Einstein PCS) so I had to set up all custom MMS, Email, Internet, and other setting that took a long time to get them all just "right"... I thought the SD card may have went, but other software that I know is on the SD card runs fine (including tomtom)... Any suggestions from anyone before I do hard reset? Please.. I don;t want to have to redo everything...
Click to expand...
Click to collapse
Do you have your Einstein settings. I haven't been able to get my Fuze to connect reliably. I'd certainly appreciate it. Thanks!