Just FYI ive got the touchscreen working on this striped down version of a RC branch build of 7. Its very snappy and memory usage is down to 400MB after booting and it takes up 4GB of HDD space.
Id definitely recommend it to anyone with a shift, To get the touchscreen working set the Tablet PC and Human Interface Device Access services to automatic startup at first boot
Enjoy, Don't ask about where to find it or how to activate it or things that would get this thread deleted as its a must have for all shift users.
Is everything working ok? Wifi, shift control center, screen resolution?
Same as usual yeah it only takes up 4GB of disk space
Ok, thanks. I'll try.
Seems the only problem i could find is Office 2010 not installing because of error 1903, It can be fixed by copying the c:\windows\fonts folder from another instalation and not overwriting whats already there
Thanks for the find kashifsiddique!
I'm currently downloading this Build 7264 x86 I was wondering how big is the fonts folder? Would it be possible to post a link just in case other don't have another windows installation.
Looks like the fonts folder is about 350MB. I'll just back this folder up that I have before I reinstall. =)
Thanks again!
HI all -
I vill test windows 7 Netbook but i can not fin the download link,can you post the link where vi can download
sorlei said:
I vill test windows 7 Netbook but i can not fin the download link,can you post the link where vi can download
Click to expand...
Click to collapse
forum rules don't allow direct linking, try usenet or bt
Ciao Dannyt84 non riesco a mandarti la mail
se puoi mi invii il link
Grazieeeeeeeeeeeeee
Related
Finally got the ubuntu Running on Blackstone!!!!
After the X1 & Raphael & Rodium, Ubuntu is on the Blackstone!
Installation
1-Extract the contents of the .zip file to the root of your storage card
2-Run Haret.exe
3-Rename ubuntuarm.img to ubuntu.img!!
4-Replace the Startup with the attached one (dont forget to insert your wifi mac adress.
*** If you want to replace the zimage, you can do it with working one from Android (from here!) Its working!
5-To have wifi working, start wifi on windows Mobile and Run Haret!
Release Notes:
Working:
Touchscreen, calibration is way off though
Hardware keyboard, touch pro layout, no fn key, so many special characters don't work
Framebuffer
X server
Wifi supposedly works if you follow the below steps, not confirmed yet
Not working:
3d acceleration
Charging
3G
Screen rotation
Front buttons
Power control such as standby, works but no way to resume
Unknown:
USB
GPS
Camera
HW3d
I hope that one of Xda Dev could mod this to fully work or to get the similar status of android on Blackstone
Download Link : Here
Pics and video of the running ubuntu will be post soon!
Reserved for pics
oooo f..ck it a crazy! stupid idea. IMHO
andriod develoment
If I am correct there are 2 developments, andriod and windows, both have different pages
I think you can get more help if you put it in the andriod development page
oh, it is a great job
1 question: is it possible to run it from internal storage? I have Transcend Class 6 card which can't run Linux from
i don't think so,but i'm gonna try it tonight and i will also post the pics and the video!
If there is a dailer /message tool i will def try it .Have tried off storeage card before but was missing a couple of files, unpacked it wrong. I did "split" my card in two, one FAT and one ext2 partition. It was with the ubuntu for omni i belive.
you dont have to split it anymore you can run it through sd card directly.
there is no dialer for ubuntu right now, i'm gonna find a way to make it possible by developing a new one after finishing my exams,or by porting the android one!
@ZaxXx: running ubuntu from internal storage doesn't work for me!
My wifi doesn't work... I've already updated startup.txt with my HD mac adress but it doesn't seems to ok... Does it work with anyone else?
I'm surprised with the speed
The taskmanager says that the cpu usage is: 95% and memory 33MB of 102MB used...
jspgresende said:
My wifi doesn't work... I've already updated startup.txt with my HD mac adress but it doesn't seems to ok... Does it work with anyone else?
I'm surprised with the speed
The taskmanager says that the cpu usage is: 95% and memory 33MB of 102MB used...
Click to expand...
Click to collapse
I can confirm the wi-fi issue...but it's really amazing!!
Hi men.
Looks like people on rhobuntu project is getting great improvements, including proper mouse behaviour, wifi, and possibly sms and 3g!
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=640785
ZaxXx said:
1 question: is it possible to run it from internal storage? I have Transcend Class 6 card which can't run Linux from
Click to expand...
Click to collapse
me too,but why?
Funciona Perfecto en mi Touch HD !!!
Gracias desde España !!!
Pasos:
Descargar el archivo adjunto.
Descomprimir el .rar
Descargar STARTUP.txt del primer post
Reemplazar el STARTUP del primer post por el del .rar que has descomprimido.
Cambiar el nombre de ubuntuarm.img a ubuntu.img
Copiar ubuntu.img y la carpeta ubuntu a la raiz de la SD.
Ejecutar Haret.exe y ya esta...
Tarda unos 5 minutos en instalar...
Hi all,
I've got a problem, that I cannot move mouse on taskbar. I can move it through whole screen but a few mm before taskbar mouse stops
download link not working, please help
link die
12.19 3D PACKAGE WITH BETTER PERFORMANCE FOR TESTING
http://forum.xda-developers.com/showthread.php?t=852937
-----------------------------------------------------------------------------------
GIVES THANKS TO "djdafreund" FOR DOING THIS FOR US. THANKS
----------------------------------------------------------------------------------------
Latest Kernel
Commit# 1238
Commit Date: Sat Dec 18 20:44:32 2010
Commit ID: 43f0a96
Pushed by: ACL (on behalf of WisTilt2)
Commit Messages:
•1238 - Speakerphone mic fix.
http://forum.xda-developers.com/showthread.php?t=869992
or
http://www.megaupload.com/?d=MVUZIME1 .....zimage and modules
=====================================
http://forum.xda-developers.com/showthread.php?t=852937
1 - Grab the "zImage and Module's" download
2 - Grab the "all 3d drivers and gralloc" download
3 - Grab the "build.2.prop. and froyo.user.conf.zip"
Extract the 3 following files from the downloaded files into the main directory of your SD card
--------------------------------------------------------------------------------------------------------------
- libGLES_qcom.so
- gralloc.msm7k.so
- build.prop
Just edit "froyo.user.conf" and add these 3 commands below.(Should be close to the end of this file, located in your (android dir)\CONF\ directory"
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
mount bind/sdcard/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so
mount bind/sdcard/gralloc.msm7k.so /system/lib/hw/gralloc.msm7k.so
mount bind/sdcard/build.prop /system/build.prop
Finally, unzip the "zImage" and "modules.xxxxx" files you downloaded also in your main android directory, (replacing zImage when asked, and deleting your previous module.xxxxx file)
Then, download the 2 APK file's, "fps2d" and "com.adobe.air.xx" file, and try installing them within Android (double click on the file's within Android), run fps2 3 time's to get a good average.)
Hope this is helpful, that's me!! The more user's we get to help this, making it easy to understand and follow, the more we can help your progress with this.
will test in a bit, thanks for link.
It appears that this isn't compatible with the phone (AT&T Pure) it hangs whatever application tries to use the 3d driver.
edit- nevermind, seems to be functional, speed increase isn't really that noticeable though.
edit2- problem is file was named .so.so in original zip, mount path only includes .so
device: HTC Touch Diamond 2 T5353 528MHz
SPL radio: 4.49.25.91
version of Android: system-FRX03(FINAL)
kernel version: htc-msm-linux-20101124_215731
so far very responsive....
manage too run angry birds with good graphics but lag maybe coz of the our phone processor....
good job mate
kjtan said:
device: HTC Touch Diamond 2 T5353 528MHz
SPL radio: 4.49.25.91
version of Android: system-FRX03(FINAL)
kernel version: htc-msm-linux-20101124_215731
so far very responsive....
manage too run angry birds with good graphics but lag maybe coz of the our phone processor....
good job mate
Click to expand...
Click to collapse
Good. Stay tune, we still tweaking it. It getting better. Thanks
sprint htc touch pro 2 (rhod400)
My scores with HTC Touch Diamond 2 T5353 528MH
17,6 in neocore and 445 in Quadrant.
tiad8 said:
forum.xda-developers.com/showthread.php?t=852937
hey guys i have this 3d driver. i want people to
test it. i already post it over PPCGEEKS .
with this driver im getting better graphics ,
smoother speed . anything that used 3d works
great for me . 3d gallery loads in seconds . games
have better graphics . angry birds lite beta plays
great .
Speed is good on games .
Just mount this file ( libGLES_qcom . so) . Thanks
to ACL. We have a way to mount this
using froyo conf. Just edit froyo conf and add
this command.
mount - -bind / sdcard / libGLES_qcom . so /
system / lib / egl/ libGLES_qcom . so
Or download this one
Click to expand...
Click to collapse
sprint htc touch pro 2 (rhod400)
works great
hello i tested this with qoudcom 3d bencmarking and it works well on htc diamond 2 frx03 latest kernels thanks
How to install it in XDAndroid??
instructions
download this file (3d driver) libGLES_qcom . so and put it on your SD card. Then download my froyo. Conf and replace the one that you have. in config on sd Good look. Thanks you
here is the link http://forum.xda-developers.com/showthread.php?t=852937
What's my froyo??
zooster said:
What's my froyo??
Click to expand...
Click to collapse
devi fare download di libGLES_qcom.so.11.29.10.ZIP.zip e froyo.user.conf.zip
qui http://forum.xda-developers.com/showthread.php?t=852937
apri libGLES_qcom.so.11.29.10.ZIP.zip e metti libGLES_qcom.so dentro il primo livello della carta SD.
apri froyo.user.conf.zip e metti froyo.user.conf dentro la cartella con il nome "conf"
froyo
my froyo is a file on sd card by map config /froyo.user.conf
will this 3d lib work on LENINred's Eclair(2.1) ?
Hi, Guys, I used a folder "Andboot" to booting Andriod, so how can use the driver?
Many THX!
brafun said:
will this 3d lib work on LENINred's Eclair(2.1) ?
Click to expand...
Click to collapse
ok figured it out myself! downloaded the .so placed it in the root folder of the SD and put in andboot/conf/eclair.user.conf the mount string bit... got 18.2 FPS
Next question is will this drain the battery faster?
xrshwy said:
Hi, Guys, I used a folder "Andboot" to booting Andriod, so how can use the driver?
Many THX!
Click to expand...
Click to collapse
just the same
place the .so on root of ur sd card
and replace the conf file inside andboot/conf
Hi, Tommy,
I have put the .so on SDCARD, the andriod didn't work at all, and I have put the .so in folder andboot, the andriod can start but slowly. and I didn't know the 3D driver had been instilled correct or not. where can I find this information?
Thanks.
brafun said:
will this 3d lib work on LENINred's Eclair(2.1) ?
Click to expand...
Click to collapse
yes it worked for me. i already test his build with 3d driver and is smoother. thanks
first post updated. test and report please.
3d driver for testing with gralloc. UPDATED 11.29.10
1.open up the froyo.user.conf
2.make sure this line is at the bottom
mount --bind /sdcard/andboot/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so
3.dump it replace the file in the andboot/conf
4.then place ur libGLES_qcom.so under ur andboot folder
all above is base on the following folder structure
-sdcard
-andboot
-AndroidApps
-conf
-media
-STARTUP CONFIG
Please note that this is a guide to how to setup an environment to create your own ROM, and to build a test AOSP ICS Rom that will work on an emulator. While it is possible to do all this in 32-bit Win 7, you will find it much (!) easier in 64-bit Win 7. The intention is to allow all the folks who have said they'd like to work on a ROM to get their feet wet. If you complete all the steps in this guide you will have a Vanilla ICS Rom that works in the Android Emulator. You would still need to modify the kernel for the Tegra and add the special radio and other drivers before porting to the Streak.
Of course you can skip step 4 if you are willing to either dual-boot Ubuntu, or go into Ubuntu full time. However I figure a lot of folks on here are still on Windows for one reason or another.
1) Make sure that the ROM for your Windows 7 computer is set to allow Virtualization. If you have a Core i7 this will be the default. Otherwise you will need to make sure to set it manually through the Setup that should come up before BOOT.
2) Download VirtualBox 4.1.8
DL Link here for VB:
http://download.virtualbox.org/virtualbox/4.1.8/VirtualBox-4.1.8-75467-Win.exe
DL Link here for VB Extensions (necessary for USB, shared folders, etc):
http://download.virtualbox.org/virt...alBox_Extension_Pack-4.1.8-75467.vbox-extpack
3) Download Ubuntu 11.04 64-bit
DL Link here:
http://www.ubuntu.com/download/ubuntu/download
Make sure (!) to select the 64-bit version before clicking download
4) Install VirtualBox and Ubuntu:
Install and Setup Guide:
http://www.sevenforums.com/tutorial...ndows-7-virtual-machine-using-virtualbox.html
(Note that some of the images from this guide are from an earlier version of Ubuntu)
I personally recommend that as long as you have at least a Quad Core that you give your VB machine Two Cores and Two Gigs of RAM. For the HD size of your Virtual HD remember that the Android Source Code is almost 16 Gigs. For speed and other purposes I suggest creating a fixed size 80 Gig (or larger) Virtual HD. While this can be on an external drive, if you have room on an internal drive that will also improve performance.
5) Install the Toolchain (Android Build Environment):
http://mjanja.co.ke/2011/11/building-android-4-0-on-ubuntu-11-10/
The first three steps will take between 1-2 hours. Step 4 will take an hour or so as well. Step 5 takes multiple hours due to the size of the Android repo source library. Plan accordingly
Hope this helps!
Looks good, but its way easier to use a direct Ubuntu installation, dude.
So far as i can see, you can use the sdk on 32-bit, too.
Mind everyone he said this was for AN EMULATOR
giveen said:
Mind everyone he said this was for AN EMULATOR
Click to expand...
Click to collapse
And that it still requires tuning for the Tegra chip and the custom radios. This is not a new ROM, rather it is what you would need to do to setup an environment to create a ROM.Just saw so many folks saying they would like to help, that it seemed to make sense to show them how to get started. If anyone has gone through this and is ready to take that next step, this would be a good place to let folks know.
exebreez said:
Looks good, but its way easier to use a direct Ubuntu installation, dude.
So far as i can see, you can use the sdk on 32-bit, too.
Click to expand...
Click to collapse
Support on 32-bit is "experimental" according to Google. As for a direct install, that'sonly true if you are ready to convert to Linux or dual boot. On a fast machine having the VM is actually pretty quick, and allows you to mess up without impacting everything else.
It's a tuto to creat a ROM for a smartphone or a computer?
Samoht59 said:
It's a tuto to creat a ROM for a smartphone or a computer?
Click to expand...
Click to collapse
This is more of a guide on how to build an environment were you can begin to build android.
How to Compile Skia Rendering Engine to a rom. (for Indic Support)
rahulsby said:
How to Compile Skia Rendering Engine to a rom. (for Indic Support)
Click to expand...
Click to collapse
Missing a link?
Hey guys,
We're back with another update for Remix OS Player version 1.0.110.
Here are the release notes:
__________________________________________________
Remix OS Player version: 1.0.110
Release date: November 15, 2016
Release notes:
1. Incorporated the latest Android Studio (version 2.2) which improves graphics performance significantly
2. Fixed bugs related to keyboard shortcuts and hotkeys
3. Fixed bugs related to keyboard hotkeys in full screen mode
__________________________________________________
Thanks for all your feedback and please remember to sending us feedback here:
http://bit.ly/2cPNq27
Speed
WOW is all I have to say this is the update that was so NEEDED. The speed it runs at is 1000 times better in my opinion. I actually am installing all my apps I use in the emulators I use in windows and making this the primary Windows Emulator for Android. THANK YOU for the AWESOME WORK!!
One thing I notice is the mouse has a slight delay in response. Once that is fixed, this will become my Primary for Android.
UPDATE!!
The Pinch zoom option uses Ctrl-Alt key the same as release mouse from the emulator. This causes a conflict and makes the pinch zoom almost useless. Please Fix.
Internal Storage
How do I get more than 4gb internal storage... the one game I tried to install won't just cause of lack of space.
You and me both. All the apps on my Samsung Galaxy Tab Pro (non-Samsung, of course), I had no trouble installing. Then I tried to install 'Asphalt 7', and I ran out of space.
I want to increase this space to at least 50GB. The procedure to increase internal space for Remix OS for PC will not work with Remix OS Player.
The only offline installer I can find seems to be corrupt & the downloader is giving a server error.
silver9990 said:
The only offline installer I can find seems to be corrupt & the downloader is giving a server error.
Click to expand...
Click to collapse
same here. please someone fix the download server.....
Unable to install
For the past 2 days, the installer gives me an error while trying to downlaod version 1.0.110.
Here is the message I keep getting:
Server Error
Download server experience problem, please try later. (torrent sha1sum check fail)
mohsin_75 said:
same here. please someone fix the download server.....
Click to expand...
Click to collapse
hlo63 said:
For the past 2 days, the installer gives me an error while trying to downlaod version 1.0.110.
Here is the message I keep getting:
Server Error
Download server experience problem, please try later. (torrent sha1sum check fail)
Click to expand...
Click to collapse
Same here, I also get the message,
"Server Error
Download server experience problem, please try later. (torrent sha1sum check fail)"
It's been like this for days as I first tried to download it 4 days ago, would have thought somebody would have noticed and fixed it by now...
@RemixOS_Jason
Are you aware of these downloading problems?
Kaide80 said:
Same here, I also get the message,
"Server Error
Download server experience problem, please try later. (torrent sha1sum check fail)"
It's been like this for days as I first tried to download it 4 days ago, would have thought somebody would have noticed and fixed it by now...
Click to expand...
Click to collapse
I have exact same problem and idk why
me 2 since some days now
I'm just wondering where the support team is, I've spent the last 4 days trying to get support from the various places they tell you to go to for support but there's been no response from anyone.
First question. is REMIX OS better as booted like i installed it or like the new REMIX OS player emulated over windows. Whats the diference in use and fell and for my specs does it matter.
Second question is how to put AT(@) symbol on croatian keyboard.
My specs are
LENOVO Z500
i5 3230m
6gb ram
1tb hdd now and on windows boot 120gb ssd
Gt 740m
Thx hope in fast response.
How to copy - paste a file or folder from pc to remix os player?
because there is many apk that i want to install from the pc.
I'm curious why this update thread was not stickied in the forum? Does that somehow imply it is less important or less stable than previous builds?
Is there any way to enable more resolution options for the player? I'm using it on a SP4 but only very low resolution options are showing up.
Yup, good one ! French android keyboard is back. Can't use all characters and symbol just using my laptop keys, and lots of the non letters keys are mixed up, but looks like you attained the requirement for me to talk around about you Best accessibility is a must have point. Hope it will improve again.
Thought too, as said on the updater's beta thread, I had to download and install manually.
Do we get any other update or this is the end of this app just like leapdroid
RemixOS_Jason said:
Hey guys,
We're back with another update for Remix OS Player version 1.0.110.
Here are the release notes:
__________________________________________________
Remix OS Player version: 1.0.110
Release date: November 15, 2016
Release notes:
1. Incorporated the latest Android Studio (version 2.2) which improves graphics performance significantly
2. Fixed bugs related to keyboard shortcuts and hotkeys
3. Fixed bugs related to keyboard hotkeys in full screen mode
__________________________________________________
Thanks for all your feedback and please remember to sending us feedback here:
http://bit.ly/2cPNq27
Click to expand...
Click to collapse
I still can't get my display out of tablet mode
Crolegion said:
Second question is how to put AT(@) symbol on croatian keyboard.
Click to expand...
Click to collapse
Look it up in an Extended ASCII table. I can use Alt-064 for an @ sign.
Maybe someone will be interested in running Windows 10 on OP6/T. I'm using it on my device... aaand it's not suitable for daily use, but it's pretty capable as of now.
Current status of the project:
- CPU works
- Touchscreen works
- USB works
- GPU partially works (there are some glitches, that's why driver isn't pushed yet to github)
- audio doesn't work
- wifi/bt doesn't work
- and pretty much everything else doesn't work
Thanks to https://github.com/edk2-porting for making it possible!
Tutorial to get it working is here: https://silime.github.io/2021/05/20/Windows10-on-arm64-EN/
I've recorded an video how it's done here:
Also I've tried some games on this thing, you can see results here:
NFS MW:
HoMM V:
Left 4 Dead 2:
But there is one important question... Can it run Crysis?
And answer is... Yes, it can:
Spreadsheet of games we tested:
https://docs.google.com/spreadsheets/d/1XYuoySgYQE0HL573sA-0RGMX7I4lt5rWJuQ8Z8yRJNY
Hey man, i'm thinking of installing windows 10/11 on my device "OP6" but have some question.
i saw your video of installing the OS, so when ever i want to boot-up windows i have to flash the "UEFI" image to boot-up windows ? cuz i saw some video about this , when rebooting the device normally through android or windows io reboot to android, but to boot-up windows they flash UEFI image through flashboot and it boot-up windows, right ? if so, when every i want windows i should use another PC to use windows on my mobile device
And can i use "EDK2 - v0.4.2" so that i can have wlan (wifi) support ? ( as the release say )
Asfor_Farah said:
And can i use "EDK2 - v0.4.2" so that i can have wlan (wifi) support ? ( as the release say )
Click to expand...
Click to collapse
I noticed you haven't gotten a response.
The project is a lot more stable than it was (although still a long way to go). WiFi, Bluetooth and battery as well as a few other things have had support added since this post. I recommend joining the project's Telegram or Discord if you are interested in updates or need help with something..I don't know if I'm allowed to post the links here but it's not too hard to find