I have a Touch Diamond and this is getting really annoying.
The screen is losing alignment all the time. I align it and it works okay... for a couple of minutes. Then the center of alignment goes either way up or way down. Sometimes only for a couple of seconds and sometimes for couple of hours. Hard-resetting it doesn't help, either.
It's happening on every single ROM I try.
And since I'm currently using win 6.5, the only way to get to screen alignment is through the start menu, so if the center of alignment goes up (I think it's up), I have to just wait until it's back to normal as I can't press the Start button.
It's annoying as hell... I have to be lucky to be able to write a message or type in a number... or do anything else actually.
Help? Pretty please?
EraserHR said:
I have a Touch Diamond and this is getting really annoying.
The screen is losing alignment all the time. I align it and it works okay... for a couple of minutes. Then the center of alignment goes either way up or way down. Sometimes only for a couple of seconds and sometimes for couple of hours. Hard-resetting it doesn't help, either.
It's happening on every single ROM I try.
And since I'm currently using win 6.5, the only way to get to screen alignment is through the start menu, so if the center of alignment goes up (I think it's up), I have to just wait until it's back to normal as I can't press the Start button.
It's annoying as hell... I have to be lucky to be able to write a message or type in a number... or do anything else actually.
Help? Pretty please?
Click to expand...
Click to collapse
No help for that problem, all what you can is sending phone i service , if you have warranty!
Before that, you can try with stock rom, and stock spl, and using mtty tool, use button search to find threads about that!
Good luck...
I have emailed support center about this issue. All they could come up is the usual stuff - try hard resetting etc...
Of course, nothing helped.
Seems like I'll have to get it repaired. However, my warranty is out.
Has anyone had problems like this? I mean, how much could it cost (I hope they won't have to change the screen itself)?
Hello, zdravo,
i think they'll have to change display, cause same thing was at me ...
You can find cheap display and all tools with it for changing display and instructions how to do that with yourself, i'm not sure how much, look at ebay, if i remember not more than 40$
Good luck, sretno
Is there ANYTHING I can do to make this device work in a sensible way?
I mean I find it deeply unsettling that I have yet to see anyone else complain about the huge design flaw this phone has.
That being, when I receive a call, the touch screen activates at the slightest touch. That doesn't make sense because I don't tie it to my wrist... I carry it in my pocket or my belt clip and even in my belt clip it presses random spots on the touch screen. I want it to not do that, first of all. In fact I don't want the phone to even turn on touch activation until I give it clearance to turn on, because otherwise it will stay there and randomly press buttons until I check my phone and realize someone called me an hour ago.
Because that's the thing—I need it on vibrate a vast majority of the time, I can't feel it vibrate but it'll open random programs or do random crap. I can always tell because whenever I decide to reach down and check my phone I feel it overheating, and I think, "Yup. Someone called me and I didn't hear or feel it vibrate." That's actually ridiculous. That's severely headache inducing at how completely backwards it is without the option to change it in settings. At least not that I've seen. As I've said, no one else is complaining about it... so what are you guys doing?
I'm sorry but as I said, this phone drives me nuts. I can't help but feel angry just by talking about it.
Actually you could either turn on the screen lock so that even if it turns on, it's locked and none of the buttons or screen touching will do anything, and the machine will turn itself off after a while.
Or,
you can install BSB tweaks and set it so that the phone doesn't turn on unless you tell it to.
Most of the time it's not the device, it's the user. Especially obvious when reading user reviews and most users claim features don't exist when in fact they never found them. Or phone is capable of certain things, but the user is not only unaware, they are angry the features are not there.
GET TO KNOW YOUR DEVICE or use available tweaks and information
use a loud ringtone, use vibrate, use a screenlock program... (S2U2 is excellent, but you may find it complex).
Or extend the phone ring time before it goes into voicemail (that's in phone settings I recall)
The phone is not perfect, but it can very easily be configured to avoid accidental answering or not noticing the call in the first place. That said, the standard options are not good...
To be fair, I'm not stupid, but I am pretty ignorant when it comes to stuff like this. Bear in mind I've been using an old flip phone for the majority of my life, and I've spent a good amount of time looking through my X1 for a setting that would make my phone work better. I've found nothing that would keep the touch screen off for incoming calls or texts, which genuinely irks me.
Yes I tried locking the phone for a while, but it's a pain getting a call and then not being able to answer in time because I notice it late, pull it out, and then have to unlock it to answer. Also, locking the phone didn't stop the touch screen from turning on and pressing random buttons... it was just that with it locked there were no buttons to press except the digit code and I might be right to guess that my phone would lock me out completely if I randomly hit the wrong buttons enough times. Also the backlight was draining the battery and it was overheating anyway. It didn't make a difference.
I also spent a generous amount of time on the internet looking for solutions, but as I've said, no one else seems to have had my problem, so I was certain I wouldn't find a solution until I asked for myself. Believe me, I wouldn't have posted anything here if I'd found one.
Anyway I'll try "tweaking" it as was suggested. Thanks for the help.
(Also bear in mind having to "tweak" a device DOES suggest it was badly designed in the first place, which was kind of my point. Paul C knows what I'm talkin' 'bout.)
Peace.
Faceeat said:
To be fair, I'm not stupid, but I am pretty ignorant when it comes to stuff like this. Bear in mind I've been using an old flip phone for the majority of my life, and I've spent a good amount of time looking through my X1 for a setting that would make my phone work better. I've found nothing that would keep the touch screen off for incoming calls or texts, which genuinely irks me.
Yes I tried locking the phone for a while, but it's a pain getting a call and then not being able to answer in time because I notice it late, pull it out, and then have to unlock it to answer. Also, locking the phone didn't stop the touch screen from turning on and pressing random buttons... it was just that with it locked there were no buttons to press except the digit code and I might be right to guess that my phone would lock me out completely if I randomly hit the wrong buttons enough times. Also the backlight was draining the battery and it was overheating anyway. It didn't make a difference.
I also spent a generous amount of time on the internet looking for solutions, but as I've said, no one else seems to have had my problem, so I was certain I wouldn't find a solution until I asked for myself. Believe me, I wouldn't have posted anything here if I'd found one.
Anyway I'll try "tweaking" it as was suggested. Thanks for the help.
(Also bear in mind having to "tweak" a device DOES suggest it was badly designed in the first place, which was kind of my point. Paul C knows what I'm talkin' 'bout.)
Peace.
Click to expand...
Click to collapse
First of all tweaking does not mean a phone was badly designed, tweaking or modding gives the option to add, remove, or change anything you want in your phone. With your logic every smart phone was badly design becuase everybody tweaks their phones. And what you are saying makes no freaking sense. How can you not answer a call when your phone is lock, the incoming call pops up on the screen? How is your phone turning on and pressing random buttons when it's locked lol? How about you give more info on what rom you are using becuase what your saying makes no dam sense.
Oh, come on, man. It was my first smart phone. If I wasn't giving it the benefit of the doubt that I COULD do something about my issues, I would've taken the phone back. Instead I posted here and asked, because I was fed up using the search function trying to figure out what I was doing.
With your logic every smart phone was badly design becuase everybody tweaks their phones.
Click to expand...
Click to collapse
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Don't get me wrong, I'm GLAD my issue can be fixed, and thank you. I'm just saying. I didn't know, and the result of not being able to figure it out was me being upset with the device.
Do you want to continue this pointless argument or can we just drop it now?
How can you not answer a call when your phone is lock, the incoming call pops up on the screen? How is your phone turning on and pressing random buttons when it's locked lol?
Click to expand...
Click to collapse
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Faceeat said:
Oh, come on, man. It was my first smart phone. If I wasn't giving it the benefit of the doubt that I COULD do something about my issues, I would've taken the phone back. Instead I posted here and asked, because I was fed up using the search function trying to figure out what I was doing.
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Don't get me wrong, I'm GLAD my issue can be fixed, and thank you. I'm just saying. I didn't know, and the result of not being able to figure it out was me being upset with the device.
Do you want to continue this pointless argument or can we just drop it now?
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Click to expand...
Click to collapse
For the 2nd time what rom are you using? 6.1 or 6.5? If it keeps being touched on your belt clip why not just keep your phone in your pocket instead? Also what is your backlight power time settings, like what is the time intervals of when you screen shuts off? Also maybe the latest version of the lock app S2U2 V2.41 might solve your problems. I've had my phone for 8 month's and have never experienced what you are saying or herd of but then again I don't keep my phone on a beltclip I keep it in my pocket. It sounds like S2U2 2.41 should help because it gives access to those options you want to change in the S2U2 settings.
This seems to be a rom problem. My phone does nothing you described. After the screen goes off it does not react to any touching of the screen at all. When its in standy mode (screen off) and a call comes in it reactivates the screen and the call can be answered either by touching the corresponding area of the screen or by pressing the green hardware button. The same behaviour can be witnessed when I lock the phone prior to the screen turning off. So I can say I have never experienced problems like you. My phone runs the latest stock rom for Switzerland (German) and is not branded.
altae said:
This seems to be a rom problem. My phone does nothing you described. After the screen goes off it does not react to any touching of the screen at all. When its in standy mode (screen off) and a call comes in it reactivates the screen and the call can be answered either by touching the corresponding area of the screen or by pressing the green hardware button. The same behaviour can be witnessed when I lock the phone prior to the screen turning off. So I can say I have never experienced problems like you. My phone runs the latest stock rom for Switzerland (German) and is not branded.
Click to expand...
Click to collapse
My phone is the same way but I'm on a custom rom. He might have to flash is phone if nothing else works.
Faceeat said:
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Click to expand...
Click to collapse
Everyones different, every one wants something to work a little differently.
Faceeat said:
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Click to expand...
Click to collapse
As mentioned previously there are many alternitive unlocking programs
Slide to unlock 2 (S2u2) is very good, customisable and free.
Here is the website http://ac-s2.com/ you can also find threads about it on XDA Developers.
I am currently using Throttle lock, Provides extra security without having to use pins, customisable, and free here is the website http://www.throttlelauncher.com/portal/Products/ThrottleLock/throttlelock-09
Once again you can find threads about it on XDA Developers.
to use either of these programs, just download the .cabs from the websites, transfer them to your phone and click on them to begin installation.
hope that helps.
For the 2nd time what rom are you using? 6.1 or 6.5?
Click to expand...
Click to collapse
6.1
Everyones different, every one wants something to work a little differently.
Click to expand...
Click to collapse
Yes, but I'm pretty sure no one wants their phone wasting batteries.
If it keeps being touched on your belt clip why not just keep your phone in your pocket instead?
Click to expand...
Click to collapse
What difference would that make? I keep other things in my pocket that are probably more likely to hit the touch screen. Besides, I got the phone before I got a belt clip. It was in my pocket first. I thought the belt clip would make it better. Since it doesn't I still prefer the belt clip for the phone's accessibility.
Also what is your backlight power time settings, like what is the time intervals of when you screen shuts off?
Click to expand...
Click to collapse
On that screen in the settings there's an option to turn off the device after a certain amount of time. Before, when I was in those settings, I had it unchecked, thinking it would turn the phone off completely. But it does exactly what I want—it disables the touch screen after a minute.
Still, that's not a perfect solution, but it helps a lot. That plus the lock app should make it well within working standards. Thank you.
SORRY FOR WASTING YOUR TIME GUYS. I take back what I said. I'm now an enlightened individual. I can build rainbows with my mouth.
Faceeat said:
Is there ANYTHING I can do to make this device work in a sensible way?
I mean I find it deeply unsettling that I have yet to see anyone else complain about the huge design flaw this phone has.
That being, when I receive a call, the touch screen activates at the slightest touch. That doesn't make sense because I don't tie it to my wrist... I carry it in my pocket or my belt clip and even in my belt clip it presses random spots on the touch screen. I want it to not do that, first of all. In fact I don't want the phone to even turn on touch activation until I give it clearance to turn on, because otherwise it will stay there and randomly press buttons until I check my phone and realize someone called me an hour ago.
Because that's the thing—I need it on vibrate a vast majority of the time, I can't feel it vibrate but it'll open random programs or do random crap. I can always tell because whenever I decide to reach down and check my phone I feel it overheating, and I think, "Yup. Someone called me and I didn't hear or feel it vibrate." That's actually ridiculous. That's severely headache inducing at how completely backwards it is without the option to change it in settings. At least not that I've seen. As I've said, no one else is complaining about it... so what are you guys doing?
I'm sorry but as I said, this phone drives me nuts. I can't help but feel angry just by talking about it.
Click to expand...
Click to collapse
Maybe a magnet on your belt phone keeper
turns on the phone...........
Recently I also discovered that keeping X1 close to a second mobile phone MAKES X1 randomly open apps by itself....
Crazy but true!!!!
Once somebody calls you and quits,
without your reaction there's no way you can activate anything if your phone is locked with a code....
A short press of the power button suspends the screen? lol.
I was about to say it but sean0r beat me to it (by weeks lol)
I felt the same thing when I first bought the phone (1-2 hours).
I just usually set my backlight to turn off after 10-30 secs. (Settings->Power->Advance Tab)
And I also don't use the lock feature since I think it's more of a hassle then to just turn the screen off (power button, like sean0r said) then turn the screen on again when I'm about to use it. It basically does the same thing like the lock/unlock button, it help prevents unwanted screen touch, only I feel it's way way more faster than the unlock button (even if you configured the lock/unlock button, to lock quicker).
And since you're new, if you haven't used any of the great custom ROMs you should definitely try it!! Read the guides carefully though, I warn you it might be addictive =D
The custom ROMs and this great XDA community is what made me keep this phone despite this phone's poor poor poor poor poor...I mean horrible build quality! Sony should thank these guys...seriously...
Sorry for bumping an old thread...
I'll rebump - flash Mr. Rusch's Touch X ROM if you are a noob. It is slick, stable, and well configured by default.
It isn't the flashiest, but it is stable and convenient. I highly recommend for beginners.
Sounds like you're using the actual security lock with password, try just using the keylock where you slide it to use it. (Like iphone)
regardless, I think you should flash energie rom on your phone.
Ive flashed many many roms including spikegottis, 826x, and even various Titanium roms but energie is the best overall for speed, apps and reliability
So I have spent the last 3 hours scouring the site and web looking for a theme that works like the Blackmod Enhanced theme for fascinate. Have not found a single thing to mod the backlight timer so maybe can't be done yet. Anyone tried that theme on the captivate?
I am rooted and tried cog 2.bv6 but it killed my wi-fi at home which was a deal breaker for me. This time trying to just tweak the stock eclair and really would love to have the 15 second extended backlight for the soft keys, the enhanced power button with reboot, recovery etc options, a battery percentage indicator (and full flash support, I realize that is more than just theme based and gets into full blown ROM's but doesn't hurt to throw it in, getting by with Skyfire browser for now)
Anyone know of a theme or very very very stable ROM that will give me these features? Backlight is the biggie as it's the only thing I can't stand on the phone.
Rob
:edited typos
I flashed Assonance 4.3, disbled the lagfix, flashed SetiroN's 1200MHz 1.4.5 Kernal, followed by the gingerbread theme (I only got the theme to flash by renaming it to update.zip and flashing in recovery manually) and it is running very stable and has backlight notifications.
AFAIK there is nothing that currently extends the backlight to stay lit longer. I'm hoping someone figures this out soon because I'd like the keys to stay lit for as long as the screen is on. The only thing available is backlight notifications which are lit up when you have a new text, email, or missed call.
I would love to have them on while the screen is visible (Except for video watching) as well. I wonder why manufacturers don't use a technology similar to the screen like the nook for the buttons? It would just be backwards... have it be all dark with a bit of the lighter color showing through. It would be easy enough to see and not take hardly any battery power right?
So this looks to be possible right now; however, it would be exceedingly difficult to do this in a sane way. For example, how do you know when to turn the lights off? Should they just be kept on until the phone falls asleep? I'd have to dig into AOSP a lot more, but I'm thinking this isn't a cut and dry easy to implement feature by any means.
Was talking to someone about this in another thread and there was a misunderstanding. The point to extending the backlight for the soft keys, for me anyway, would be to keep them active thus eliminating the need to touch the screen to enable the back or home button (or pressing the button several times to get it to wake up). Just in case someone had the wrong impression of the goal here.
Guardian_Bob said:
So this looks to be possible right now; however, it would be exceedingly difficult to do this in a sane way. For example, how do you know when to turn the lights off? Should they just be kept on until the phone falls asleep? I'd have to dig into AOSP a lot more, but I'm thinking this isn't a cut and dry easy to implement feature by any means.
Click to expand...
Click to collapse
I think just giving the option of the length of time someone wants them to stay on kind of solves this. I would love them to stay on for 15 seconds or so instead of the 3 seconds it is at now.
Ya I seriously would like this implemented. DEVS someone please try to do this. I would gladly be willing to donate for it.
So I wasn't clear before. I'll try again.
There are technical issues with detecting when the user has stopped touching the screen. It isn't as simple as raising a timeout value, you'd have to create an application that was constantly monitoring all gestures, using a good bit of processing power and battery.
This appears to be controlled by hardware for the most part.
How about as a start the application can at least extend the time to 15 sec after any one of the bottom 4 buttons are pressed.
Sent from my SAMSUNG-SGH-I897 using XDA App
I would be happy just having the lights lit. The key activity for the 2-3 seconds is fine.
I am getting old i guess and need to see where the keys are
On Di11igafs 2.5 they stay on at least 10 seconds so there must be a way..
Sent from my Super Captivate S......XDA - style!!
http://forum.xda-developers.com/showthread.php?t=875013
Happy new year.