Database Develop

็้้้้Help me pls (no booting)

my tattoo not booting it's alway on logo 'tattoo' and can't fastboot, hboot, hr
pls help me

Apteem,
Assuming that your Tattoo was booting at some time in the past, it will help to know what you did that made it stop working.

mainfram3 said:
Apteem,
Assuming that your Tattoo was booting at some time in the past, it will help to know what you did that made it stop working.
Click to expand...
Click to collapse
i will rooting for add font when i adding font my tattoo is hang and can not booting

apteem said:
i will rooting for add font when i adding font my tattoo is hang and can not booting
Click to expand...
Click to collapse
do you have a backup font?? if yes, you can push the backup in while you plug your phone, run the adb command and restore your fonts. seem like some fonts don't working and make Tattoo can't boot.

3DPRO said:
do you have a backup font?? if yes, you can push the backup in while you plug your phone, run the adb command and restore your fonts. seem like some fonts don't working and make Tattoo can't boot.
Click to expand...
Click to collapse
i don't backup and when i plug my phone i can not use command adb because computer don't see my phone

can't enter fastboot or hboot????

gambitvbi said:
can't enter fastboot or hboot????
Click to expand...
Click to collapse
can't enter fastboot and hboot

And boot into recovery?
Are you sure you are trying to enter hboot/fastboot the right way? If you see the "tattoo"-logo, you should already be through hboot.
-bm-

-bm- said:
And boot into recovery?
Are you sure you are trying to enter hboot/fastboot the right way? If you see the "tattoo"-logo, you should already be through hboot.
-bm-
Click to expand...
Click to collapse
i should be doing ? my tattoo alway on logo not working when i press home+turn it show message "Can't open /cache/recovery/command"

Apteem,
If you see the "Can't open /cache/recovery/command", your in recovery mode.
You need to be in Fastboot.
Power down your phone.
Press Volume Down and Power at the same time.
You should get a white screen with 3 skating androids.
The hboot will scan for several files on your memory card.
When it is done, press the correct key to enter fastboot.
"Fastboot" will appear on the screen.
Insert USB cable.
"Fastboot USB" will appear on the screen.
Launch the RUU utility in your PC and flash away.

mainfram3 said:
Apteem,
If you see the "Can't open /cache/recovery/command", your in recovery mode.
You need to be in Fastboot.
Power down your phone.
Press Volume Down and Power at the same time.
You should get a white screen with 3 skating androids.
The hboot will scan for several files on your memory card.
When it is done, press the correct key to enter fastboot.
"Fastboot" will appear on the screen.
Insert USB cable.
"Fastboot USB" will appear on the screen.
Launch the RUU utility in your PC and flash away.
Click to expand...
Click to collapse
how i get it ?

what do you need? the ruu? look for RUU Click HTC WWE 1.67.405.6 WWE release signed NoDriver.rar in developers forum

gambitvbi said:
what do you need? the ruu? look for RUU Click HTC WWE 1.67.405.6 WWE release signed NoDriver.rar in developers forum
Click to expand...
Click to collapse
in adb command << error: device not found

Help me pls !!!

apteem said:
Help me pls !!!
Click to expand...
Click to collapse
Do you have a goldcard, or have you made one?
EDIT: To get fastboot menu as mainfram3 posted above, HOLD DOWN VOLUMEDOWN (on the side) as you boot the Tattoo up. You will get into a screen with androids on skateboards. Give it 30 seconds, then download the offical WWE ROM, extract it, run the EXE and follow the instructions.
If you are failing to do this, well, sorry, but send it in for repairs under a "downloaded new update and won't boot anymore" excuse.

Coburn64 said:
Do you have a goldcard, or have you made one?
EDIT: To get fastboot menu as mainfram3 posted above, HOLD DOWN VOLUMEDOWN (on the side) as you boot the Tattoo up. You will get into a screen with androids on skateboards. Give it 30 seconds, then download the offical WWE ROM, extract it, run the EXE and follow the instructions.
If you are failing to do this, well, sorry, but send it in for repairs under a "downloaded new update and won't boot anymore" excuse.
Click to expand...
Click to collapse
i don't have a gold card and i failed to do RUU. my tatoo is device in HK but i live in thailand.

apteem:
The key of making a goldcard is the sdcard's CID. You should borrow another android phone running donut kernel from others and insert your sdcard to it, get the CID(the way discribed in other thread) and make the goldcard. btw, RUU can't run without java VM.

cn.fyodor said:
apteem:
The key of making a goldcard is the sdcard's CID. You should borrow another android phone running donut kernel from others and insert your sdcard to it, get the CID(the way discribed in other thread) and make the goldcard. btw, RUU can't run without java VM.
Click to expand...
Click to collapse
thx u i wil tryingl

any way for help me.

apteem said:
any way for help me.
Click to expand...
Click to collapse
No way but making a goldcard in my opinion, or waiting for the community ROM.

[Q] There's any form to enter to the bootloader, from my pc?

Pleas i need help. my vol-down button is broken. I need another way to enter into the boot loader.
Thanks

Gab00 said:
Pleas i need help. my vol-down button is broken. I need another way to enter into the boot loader.
Thanks
Click to expand...
Click to collapse
Use the cedesmith's cLK bootloader and cLK Android build. In this bootloader you do not hold the voldown button, you hold down any key (except power) to show the console.
cLK: http://forum.xda-developers.com/showthread.php?t=901305&highlight=bootloader

thanks, i'll try and inform u
spalm said:
Use the cedesmith's cLK bootloader and cLK Android build. In this bootloader you do not hold the voldown button, you hold down any key (except power) to show the console.
cLK: http://forum.xda-developers.com/showthread.php?t=901305&highlight=bootloader
Click to expand...
Click to collapse

clk is a good idea - but you need the volume key to flash it - directions::
make sure you have hspl
- enter SPL by holding VOL DOWN key while powering/resting the phone.
- flash with customruu like you would a windows rom and/or magldr
Click to expand...
Click to collapse
sorry, mate. haven't seen a solution for your problem.
edit - are you running android (i assume so) or WM? if the latter, lots of options.

jsmccabe78 said:
clk is a good idea - but you need the volume key to flash it - directions::
sorry, mate. haven't seen a solution for your problem.
edit - are you running android (i assume so) or WM? if the latter, lots of options.
Click to expand...
Click to collapse
Yeah, you're right. My mistake. It was about the SPL (phone bootloader) ...
But the phone bootloader can trigger via USB cable (for example, when installing the wm6 rom via USB, the windows installer restarts the phone to phone bootloader). I have not tried, but it seems possible

spalm said:
You're right, but the phone bootloader can trigger via USB cable (for example, when installing the wm6 rom via USB, the windows installer restarts the phone to phone bootloader). I have not tried, but it seems possible
Click to expand...
Click to collapse
you are right about rebooting into bootloader - but that is via WM, not android. i have not seen the ability of android to directly boot into WM bootloader without volume key usage. but would be nice if i am wrong, as many are dependent on the volume key! definitely anything is worth a try; hope you get it OP!

jsmccabe78 said:
you are right about rebooting into bootloader - but that is via WM, not android. i have not seen the ability of android to directly boot into WM bootloader without volume key usage. but would be nice if i am wrong, as many are dependent on the volume key! definitely anything is worth a try; hope you get it OP!
Click to expand...
Click to collapse
Yes, again I must agree. I checked.
With the wm6 on board you can trigger phone bootloader via USB and ActiveSync. With android can not.
So when you have a wm on your phone, you can install cLK or maglrd. When you do this, you have no way back with a broken vol-down button - for now.
Thank you jsmccabe78 for correcting

spalm said:
Yes, again I must agree. I checked.
With the wm6 on board you can trigger phone bootloader via USB and ActiveSync. With android can not.
So when you have a wm on your phone, you can install cLK or maglrd. When you do this, you have no way back with a broken vol-down button - for now.
Thank you jsmccabe78 for correcting
Click to expand...
Click to collapse
i saw, in another post, that i can copy the bootloader.exe file into de device and run from the phone. That can be usefull.
thanks

Gab00 said:
i saw, in another post, that i can copy the bootloader.exe file into de device and run from the phone. That can be usefull.
thanks
Click to expand...
Click to collapse
you are running android, correct?
i'm not saying don't try it, but i don't believe exe files do anything in android...give it a go and report back.

jsmccabe78 said:
you are running android, correct?
i'm not saying don't try it, but i don't believe exe files do anything in android...give it a go and report back.
Click to expand...
Click to collapse
I'm running android, i can't enter to the bootloeader. =(
i'll install another dft rom.
Thanks

[Q] Help unbrick device

After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one

The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.

did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).

SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "

kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash

arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.

SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!

arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.

arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure

SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11

arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...

arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.

RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s

SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?

Power and vol-, not+

Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?

arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.

[Q] my Sptint HTC Desire 510 is completly brick

i tried to root my 510 and now it is completely brick
when i press power button it stuck on HTC logo and nothing else
.. i want to make it like original case
i want it with the original recovery and original rom .. like i used it for the first time
please guide me to the right direction .. please

nuclearmaker said:
i tried to root my 510 and now it is completely brick
when i press power button it stuck on HTC logo and nothing else
.. i want to make it like original case
i want it with the original recovery and original rom .. like i used it for the first time
please guide me to the right direction .. please
Click to expand...
Click to collapse
You're probably missing the OS. You're not going to get the original recovery back but you can download a stock image and flash it in recovery to get an OS.

dipspit said:
You're probably missing the OS. You're not going to get the original recovery back but you can download a stock image and flash it in recovery to get an OS.
Click to expand...
Click to collapse
thank you for response
actually i dont know how to start this
please lead me for steps to do that
what i need ? what is the best rom i can download and the link
and thank you again

nuclearmaker said:
thank you for response
actually i dont know how to start this
please lead me for steps to do that
what i need ? what is the best rom i can download and the link
and thank you again
Click to expand...
Click to collapse
What carrier do you have? I'm assuming that you have TWRP installed?

dipspit said:
What carrier do you have? I'm assuming that you have TWRP installed?
Click to expand...
Click to collapse
the carrier is Sprint .. and yes i guess that i can install TWRP v 2.8.1

nuclearmaker said:
the carrier is Sprint .. and yes i guess that i can install TWRP v 2.8.1
Click to expand...
Click to collapse
Download
Boot to hboot (volume down + power)
Select recovery
Connect usb to computer/phone
Open cmd (WIN + R)
cd to wherever you downloaded to (eg. Downloads)
Run "adb push revmod.zip sdcard/revmod.zip"
Disconnect usb to computer/phone
In TWRP go to backup and backup the phone.
Go back and go to install.
Find revmod.zip
Flash
Afterwords, reboot when asked.

dipspit said:
Download
Boot to hboot (volume down + power)
Select recovery
Connect usb to computer/phone
Open cmd (WIN + R)
cd to wherever you downloaded to (eg. Downloads)
Run "adb push revmod.zip sdcard/revmod.zip"
Disconnect usb to computer/phone
In TWRP go to backup and backup the phone.
Go back and go to install.
Find revmod.zip
Flash
Afterwords, reboot when asked.
Click to expand...
Click to collapse
after doing all that steps and successful install
i reboot and the same HTC logo stuck and nothing happen
any ideas ??

nuclearmaker said:
after doing all that steps and successful install
i reboot and the same HTC logo stuck and nothing happen
any ideas ??
Click to expand...
Click to collapse
The problem is the lack of an OS to boot and so it just hangs at the HTC screen. Either a) flash another stock or b) assuming it's been less than 30 days, take it back to wherever you bought it and complain it's broke and feign ignorance. You may also try restoring to factory defaults and installing the stock again. Sounds like you may have ****ed your partitions doin whatever it is you was doin.

dipspit said:
The problem is the lack of an OS to boot and so it just hangs at the HTC screen. Either a) flash another stock or b) assuming it's been less than 30 days, take it back to wherever you bought it and complain it's broke and feign ignorance. You may also try restoring to factory defaults and installing the stock again. Sounds like you may have ****ed your partitions doin whatever it is you was doin.
Click to expand...
Click to collapse
thank you so much..
that really work .. any ideas about unlock the sim card ? even with root ?

nuclearmaker said:
thank you so much..
that really work .. any ideas about unlock the sim card ? even with root ?
Click to expand...
Click to collapse
Awesome sauce.
So far no method has been developed. Contact Sprint and ask to unlock your phone is my only answer.

dip_spit said:
Download
Boot to hboot (volume down + power)
Select recovery
Connect usb to computer/phone
Open cmd (WIN + R)
cd to wherever you downloaded to (eg. Downloads)
Run "adb push revmod.zip sdcard/revmod.zip"
Disconnect usb to computer/phone
In TWRP go to backup and backup the phone.
Go back and go to install.
Find revmod.zip
Flash
Afterwords, reboot when asked.
Click to expand...
Click to collapse
I have the same phone but i dont understand what you are saying after "select recovery". could you explain in more detail? please?

[Q] 64 bit RUU

Hi,
Im searching RUU for 64 bit.

Europe version... https://mega.co.nz/#!aNBDWITC!Zpb7D2ublCdR6YPm46hSgy6vtDWXwgvud1iDfOuFDc8
vwadam said:
Hi,
Im searching RUU for 64 bit.
Click to expand...
Click to collapse

jdmedeiros said:
Europe version... https://mega.co.nz/#!aNBDWITC!Zpb7D2ublCdR6YPm46hSgy6vtDWXwgvud1iDfOuFDc8
Click to expand...
Click to collapse
Thanks for link,I tried it,first time its load one thing,im click on Accept.... than windows is close and its all...i tried 3 times too and nothing..im wait 1 hour,but nothing..

Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48dKBYczMLGPBt1ld7YUiHdXQ0jG7nO-bt-IFn0 and rename it o 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
vwadam said:
Thanks for link,I tried it,first time its load one thing,im click on Accept.... than windows is close and its all...i tried 3 times too and nothing..im wait 1 hour,but nothing..
Click to expand...
Click to collapse

jdmedeiros said:
Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48dKBYczMLGPBt1ld7YUiHdXQ0jG7nO-bt-IFn0 and rename it o 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
Click to expand...
Click to collapse
Ok,thanks.
You mean restart Recovery or not?

No, I mean what I wrote. When you press the Power button from the Fastboot screen it will go to the HBOOT screen, look for a file named 0PCVIMG.zip and try to install it.
vwadam said:
Ok,thanks.
You mean restart Recovery or not?
Click to expand...
Click to collapse

jdmedeiros said:
No, I mean what I wrote. When you press the Power button from the Fastboot screen it will go to the HBOOT screen, look for a file named 0PCVIMG.zip and try to install it.
Click to expand...
Click to collapse
When i try to add this file to my phone its say its not connected (Im in sdcard folder in pc,but its say this)
If i want to add another file its working perfect,but with this zip no..you have any idea?
ADB and Fastboot dont work,i checked adb devices/fastboot devices and adb only say list of device attached but not tell device name,fastboot is say nothing..

Phone hang at htc logo screen
jdmedeiros said:
No, I mean what I wrote. When you press the Power button from the Fastboot screen it will go to the HBOOT screen, look for a file named 0PCVIMG.zip and try to install it.
Click to expand...
Click to collapse
Hi jdmedeiros,
I loaded this RUU (which is the correct ROM for my htc 510 bought in Singapore) to the micro sd card and it runs and then return error message "Device halted due to large image update fail. Press power to reboot."
I have rooted my 64 bit htc510 and some reason I may have deleted or uninstall the wrong apps, my phone is not able to reboot to factory default and always hang at the white screen with htc logo.
Anyone knows how to find this will be greatly appreciated.
Thanks.

Is your bootloader locked?
if (bootloader is not locked) {
1. reboot phone to bootloader (it will say fastboot usb under a red bar)
2. from the pc run "fastboot oem lock" (the phone will restart and come to the bootloader screen referred to in point 1.)
3. press the Power button; it will go into the HBOOT and if that is the right file for your phone than it should install.
4. let us know if it worked... we like to know
}
looloo510 said:
Hi jdmedeiros,
I loaded this RUU (which is the correct ROM for my htc 510 bought in Singapore) to the micro sd card and it runs and then return error message "Device halted due to large image update fail. Press power to reboot."
I have rooted my 64 bit htc510 and some reason I may have deleted or uninstall the wrong apps, my phone is not able to reboot to factory default and always hang at the white screen with htc logo.
Anyone knows how to find this will be greatly appreciated.
Thanks.
Click to expand...
Click to collapse

jdmedeiros said:
Is your bootloader locked?
if (bootloader is not locked) {
1. reboot phone to bootloader (it will say fastboot usb under a red bar)
2. from the pc run "fastboot oem lock" (the phone will restart and come to the bootloader screen referred to in point 1.)
3. press the Power button; it will go into the HBOOT and if that is the right file for your phone than it should install.
4. let us know if it worked... we like to know
}
Click to expand...
Click to collapse
I am able to see fastboot usb. When I ran "fastboot oem lock", phone restarted but ended with the attached error message "status read failed. (too many links)". See attached file.
Now the top of the screen has 2 new lines :
"*** Relocked ***
*** security warning ***
Please help. I tried various method but still stuck with the boot screen or went into bootloaded screen but not able to install anything.

It works!!!
Made a stupid mistake : didn't insert the microsd card when I rebooted the phone in fastboot.
Took about 15 mins to complete the flash. Now back to the stock rom.
Will root the phone again later.
All this will not be possible without your generous help.

Very good! Now when the phone reboots and you are looking at those two lines *** Relocked *** *** security warning ***, meaning that you are in the bootloader screen, press the POWER button and it will go to the HBOOT menu and install your update, as long as the file is in the root of the sdcard and is called 0PCVIMG.zip
looloo510 said:
I am able to see fastboot usb. When I ran "fastboot oem lock", phone restarted but ended with the attached error message "status read failed. (too many links)". See attached file.
Now the top of the screen has 2 new lines :
"*** Relocked ***
*** security warning ***
Please help. I tried various method but still stuck with the boot screen or went into bootloaded screen but not able to install anything.
Click to expand...
Click to collapse

I cant paste this zip on sdcard. Its allways say Phone is not connected or phone not response..any idea for fix it?

Remove the sdcard from the phone and insert it directly into the computer (after you place in the carrier) and then copy the file to the sdcard.
vwadam said:
I cant paste this zip on sdcard. Its allways say Phone is not connected or phone not response..any idea for fix it?
Click to expand...
Click to collapse

jdmedeiros said:
Remove the sdcard from the phone and insert it directly into the computer (after you place in the carrier) and then copy the file to the sdcard.
Click to expand...
Click to collapse
I have added this zip to my 32gb sdcard and rename it to right name,but phone dont find it on hboot,i thin because my pbone is ubl,but i cant lock it because fastboot devices is no work,dont know whats the problem...im using w7 32 bit
Edit: Fixed adb and fastboot devices,going to try it now.
I got this error when phone tried to flash this zip:
"CID incorrect!
Update Fail!
Device halted due to Large Image update fail.
Press bower to reboot"

OK, it's the wrong file for your phone. That's what the message means.
vwadam said:
I have added this zip to my 32gb sdcard and rename it to right name,but phone dont find it on hboot,i thin because my pbone is ubl,but i cant lock it because fastboot devices is no work,dont know whats the problem...im using w7 32 bit
Edit: Fixed adb and fastboot devices,going to try it now.
I got this error when phone tried to flash this zip:
"CID incorrect!
Update Fail!
Device halted due to Large Image update fail.
Press bower to reboot"
Click to expand...
Click to collapse

jdmedeiros said:
OK, it's the wrong file for your phone. That's what the message means.
Click to expand...
Click to collapse
Now RUU too started,its on 3/8 atm,i hope its will fix the problem with phone.
Edit: All is work perfect after ruu,thanks for help.

jdmedeiros said:
Download this and rename it o 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
Click to expand...
Click to collapse
There's a problem with the zip - can you upload it again please? Tried downloading 7 times now, on different browsers and machines, always comes back as corrupt (checked out the contents of the zip with 7zip and the userdata8 img file is incomplete)

64 bit ruu
hi. i need a 64 bit ruu for my desire 510 .if you could help me i would apreciate it . and also i was wondering if "lightning kernel " will work on this device

LYNO23 said:
hi. i need a 64 bit ruu for my desire 510 .if you could help me i would apreciate it . and also i was wondering if "lightning kernel " will work on this device
Click to expand...
Click to collapse
This is from my dropbox and if you download it you need to extract it from the zip file first and it's meant to be used on a computer NOT a phone and if you don't know what you are doing with an RUU read and learn first please do not PM me asking how to use this because I won't answer any PM about this!
HTC Desire 510 64 BIT Europe version
---------- Post added at 09:38 PM ---------- Previous post was at 09:38 PM ----------
bobbytables22 said:
There's a problem with the zip - can you upload it again please? Tried downloading 7 times now, on different browsers and machines, always comes back as corrupt (checked out the contents of the zip with 7zip and the userdata8 img file is incomplete)
Click to expand...
Click to collapse
This is from my dropbox and if you download it you need to extract it from the zip file first and it's meant to be used on a computer NOT a phone and if you don't know what you are doing with an RUU read and learn first please do not PM me asking how to use this because I won't answer any PM about this!
HTC Desire 510 64 BIT Europe version