Database Develop

CorePlayer 1.2 Just Released!

Anyone try it yet? Downloading now...

Installed last night over v1.1.3 without issue. I just have coreplayer installed, no TCPMP or flash bundles. I went to m.youtube and picked a video, Core opened and streamed it nicely. It looks pretty much the same as before but the change log certainly shows a ton of fixes and tweaks.

I installed it too, and still cannot play files from m.youtube. I have TCPMP and flash installed.
Also still cannot get audio from ac3 files, do you have the same?

gnollo,
Go into Core Player menu>tools>preferences>select page>File Associations and set RTSP protocol (check the box).
Bingo-m.youtube.com

Does ist only support m.youtube? Or is there a chance to get it working with full youtube like TCMP with Videoflashbundle?

They promise full youtube support later this month

Ac3 will only be supported later

Alemaker said:
gnollo,
Go into Core Player menu>tools>preferences>select page>File Associations and set RTSP protocol (check the box).
Bingo-m.youtube.com
Click to expand...
Click to collapse
I followed your instructions.
Now when I click on the picture on a clip, coreplayer starts but the file does not play (or does not stream, not sure which of the two....

Menneisyys said:
Ac3 will only be supported later
Click to expand...
Click to collapse
Thanks for that, I am playing ac3 files with TCMP at the moment, but there is more stutter when panning.

TheGodfather-GF said:
Does ist only support m.youtube? Or is there a chance to get it working with full youtube like TCMP with Videoflashbundle?
Click to expand...
Click to collapse
Guys,
Don't get your hope high for Youtube, it will never happen the way TCMP does with flash bundle...
Personally, I am very disappointed with Core Player's progress, I brought the very first version of CP on the day it was released back in Oct 06 and an year and half later, it's hardly any different (my opinion) Betaboy will tell us of millions of fixes, improvements etc but I am not convinced at all. I am still using TCMP Player.
Here is confirmation from Betaboy...
"As far as YouTube... we do not play ANY flash video... nor will we ever with the restrictions Adobe has on the Flash Container (even though we do support it internally for testing purposes only)"

gnollo said:
I followed your instructions.
Now when I click on the picture on a clip, coreplayer starts but the file does not play (or does not stream, not sure which of the two....
Click to expand...
Click to collapse
Not sure,
All I did was what I wrote in my instructions and it's working for me.
Sorry that I can't provide more detail.

gnollo said:
I followed your instructions.
Now when I click on the picture on a clip, coreplayer starts but the file does not play (or does not stream, not sure which of the two....
Click to expand...
Click to collapse
I checked RTP and RTSP then exited Core and did a power off reset and it worked fine after that.

RemE said:
I checked RTP and RTSP then exited Core and did a power off reset and it worked fine after that.
Click to expand...
Click to collapse
tried that but no change.
CP shows filename and duration after loading, but the video never appears. I tried moving along the timeline, no change.

seems better than previous versions
It might be a soon judgment / coincidence though, but the 1.2 which replaces my 1.1.3 plays smootlhly (in QTV mode)
Is it the extra twealing they did, or the DCS V1.7 ROM...(the fastest I tested so far) it will stay a mistery.
Gonna try VBenchmark tomorrow to see if we get a +1800 score .

No youtube playback through Coreplayer...
gnollo said:
tried that but no change.
CP shows filename and duration after loading, but the video never appears. I tried moving along the timeline, no change.
Click to expand...
Click to collapse
.
Been having the same problem as you. I even flashed a new ROM to my Kaiser, but to no avail.
@ Alemaker:
Could you check please to see what you may have installed that is bringing you success? Flash application? TCPMP without FlashBundle or whay?
Any ideas Betaboy?

QTV does not work for LG KS20
The QTV mode does not work with coreplayer 1.2 on my LG KS20, all I get is a black screen. Do I have to do something to have this program working as advertised for the MSM 7200 chipset ?
I searched this forum and found another KS20 user stating that the 1.1.3 was already not working and some users having differents PPC having the same black screen problem. I found a post on the 1.2 release thread on the coreplayer forum where another KS20 user was having the same blank screen problem. Did anyone found how to get rid of it ? I bought coreplayer yesterday for QTV support, and since it does not work, it is useless for me since TCPMP is working as well as this product without QTV support.
If someone could help me, it would be much appreciated.
Edit : the rtsp protocol does not work either, and I have the same problem as the user on the coreplayer forum : I can no more view rtsp streams with WMP when I uncheck this protocol support in coreplayer. Any help about this too ?

Could someone tell me whether CorePlayer can play audio files using a simple folder-type structure - i.e. just a plain list of files in their folder order, NOT using ID3 album/artist/genre/inside-leg-measurement/etc tags.
What I have at the moment (playing via PocketMusic 4) is just one AUDIO folder on my storage card, and within that there's a PODCAST folder, a RADIO folder and a SONGS folder. These three folders are updated automatically every time I sync my device to my PC so that any newly fetched podcasts, individual song downloads, etc are copied into the three folders silently.
When I launch PocketMusic, it scans the whole AUDIO folder and creates a list of all my MP3 files, showing the podcast files at the top, then radio stuff and finally songs (with each folder's contents neatly sorted alphabetically). Playback returns to the last played item and position by default, which is great for those two-hour podcasts that I can't listen to in one session. Once I've listened to a podcast, I just delete the file via PocketMusic from the device, and the sync program will later delete the PC copy too. All really simple and neat and totally automatic.
I guess the one big downside is that is won't play video podcasts. I've looked at lots of other programs, but nothing else seems to offer this very logical load-list-on-startup and sort by folders facility. Will CorePlayer do this sort of thing?
Andre

Hey! Where the heck to you set 1.2 so that if you put your device to sleep (lock the keys and turn off the backlight) the music continues to play?

whocares2 said:
The QTV mode does not work with coreplayer 1.2 on my LG KS20, all I get is a black screen. Do I have to do something to have this program working as advertised for the MSM 7200 chipset ?
I searched this forum and found another KS20 user stating that the 1.1.3 was already not working and some users having differents PPC having the same black screen problem. I found a post on the 1.2 release thread on the coreplayer forum where another KS20 user was having the same blank screen problem. Did anyone found how to get rid of it ? I bought coreplayer yesterday for QTV support, and since it does not work, it is useless for me since TCPMP is working as well as this product without QTV support.
If someone could help me, it would be much appreciated.
Edit : the rtsp protocol does not work either, and I have the same problem as the user on the coreplayer forum : I can no more view rtsp streams with WMP when I uncheck this protocol support in coreplayer. Any help about this too ?
Click to expand...
Click to collapse
whocares2... let me first offer you a refund as "it does not work, it is useless for me". Second we will look into the WMP fill assoc bug.
Also... Did you follow the other threads here about QTv and what we did to get it to work? But point taken in that we we not 'officially' state QTv support but we will mark it as 'unofficial'.

dgduris said:
Hey! Where the heck to you set 1.2 so that if you put your device to sleep (lock the keys and turn off the backlight) the music continues to play?
Click to expand...
Click to collapse
Top bar left > down arrow/right > View > Blank Screen

Tcpmp doesnt seem to be working on Xperia

I couldnt get tcpmp to work on the xperia... anyone else with this situation?
bR

I think the reason it does not work is because the xperia is not yet available

anath said:
I think the reason it does not work is because the xperia is not yet available
Click to expand...
Click to collapse
but i have it right here on my hands...and i can say its a brilliant phone..am just keen on seeing video playback on this lovely phone..
bR

What was the problem with TCPMP? Which version have you tried? There is a special version for Windows Mobile 6.1, older versions will not work.

foo said:
What was the problem with TCPMP? Which version have you tried? There is a special version for Windows Mobile 6.1, older versions will not work.
Click to expand...
Click to collapse
please can you lead me to that...
thanks

i have this error: Unexpected program failure. please send "crash.txt" to the developer. Program will now exit.
and am using 0.81RC1
Thanks

essojay said:
please can you lead me to that...
thanks
Click to expand...
Click to collapse
Sure: http://forum.xda-developers.com/showthread.php?t=380387

Just get the coreplayer. SHell out 25 bucks or 12 quid

same error on my device. (tcpmp 0.81beta)
(i`ve got my german qwertz xperia x1 today.) tcmp suxx.
no stereo speakers, no htd compatibel accelerometer. (no G-sensor htc compatible)

core 1.2.5 works with mp3 + videos on x1.
i`ve tested it already.
but the videos are NOT running smoth like the core player on my htc diamond.
there are a lot of lost frames. we have to wait for a firmware update with updated
drivers.
i hope the HTC XPERIA X1 will got an own forum category on xda-dev`s, with rom developement.

I have the free 0.72RC1 running on my Toshiba G900 that too has 480x800. And this is no problem, running all very smooth. I am waiting for my x1, but I am sure, this TCPMP-version will work as good on the X1.
What one has to do is to try the video settings. On my G900 I use the "GDI" but this is depending on the PPC and can be different on X1.
Even largest .avi are played very smooth.

DOMin8or said:
core 1.2.5 works with mp3 + videos on x1.
i`ve tested it already.
but the videos are NOT running smoth like the core player on my htc diamond.
there are a lot of lost frames. we have to wait for a firmware update with updated
drivers.
i hope the HTC XPERIA X1 will got an own forum category on xda-dev`s, with rom developement.
Click to expand...
Click to collapse
Sounds more like an issue with Coreplayer rather then the X1 itself. The panels alone use 3d acceleration so the xperia doesnt need any firmware update for drivers. Does Coreplayer pick up the Ati imageon under the Videos tab in preference??
Once it becomes a bit more poplar I'm sure people will post in the CoreCodec forum about tehe issue. I know I will for sure since I bought the app for the Touch Pro and Kaiser.

Which TCPMP/Player You Have On Your Device
puerrican85 said:
Sounds more like an issue with Coreplayer rather then the X1 itself. The panels alone use 3d acceleration so the xperia doesnt need any firmware update for drivers. Does Coreplayer pick up the Ati imageon under the Videos tab in preference??
Once it becomes a bit more poplar I'm sure people will post in the CoreCodec forum about tehe issue. I know I will for sure since I bought the app for the Touch Pro and Kaiser.
Click to expand...
Click to collapse
You need several component parts to make it with a 6.1 wm pocketPC.....!

puerrican85 said:
Sounds more like an issue with Coreplayer rather then the X1 itself. The panels alone use 3d acceleration so the xperia doesnt need any firmware update for drivers. Does Coreplayer pick up the Ati imageon under the Videos tab in preference??
Once it becomes a bit more poplar I'm sure people will post in the CoreCodec forum about tehe issue. I know I will for sure since I bought the app for the Touch Pro and Kaiser.
Click to expand...
Click to collapse
oh yea do you use mymobiler? if so could you see how that works with the x1 also http://www.mymobiler.com/

This version of TCPMP works perfectly on Xperia X1 http://rapidshare.com/files/122436543/TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB.zip

sounds good. just downloading
thx 4 da link

ell82 said:
This version of TCPMP works perfectly on Xperia X1 http://rapidshare.com/files/122436543/TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB.zip
Click to expand...
Click to collapse
Sadly, this does not work on my UK X1i. Video frame changes every few seconds and audio is disjointed. I've played around with the settings, to little (if any) effect.
- Mike

Does anybody have h.264 files playing well on coreplayer or TCPMP?
in fact, i don't really even know what's the difference between the two they have such similar names.
h.264 will open on TCPMP (I installed the h.264 codec), and it shows the first frame, but otherwise video may move one frame the entire clip and audio may play half a second of audio. I tried boosting the buffer settings (what are the optimal settings?) and the video format (no idea which one is for what.
Coreplayer will open it and tell me it doesn't support h.264 when the webpage says it does!! It will play the audio perfectly, but no video at all.
Very confusing.

well, h.264 needs lots of cpu performance.
in fact i've got problem to play h264 videos on my "old " P4 2,3ghz laptop...
so i dont know if its possible to run it on the X1

good!
http://www.4shared.com/file/127539627/86a6a2da/TCPMP_xperia_x1.html

After all the drivers and discussions...Can any1 play videos well on a Kaiser?

Hey guys
Title says it all
I was wondering, after all the new drivers that have been released and all the discussions has any1 actually been able to use the Kaiser as a decent video player??
Ive been trying, tweaking Core Player, trying different drivers, different setting when i encode etc etc... But i cant get the video to play smoothly! I still get "tearing" between scenes... Its just not a pleasure to watch
Anyone else had more luck of late??

Try this: http://forum.xda-developers.com/showthread.php?t=357330

So i guess then the short answer is... No??
I see that Core Player has its own codec or whatever it is, meant specially for the Qualcomm CPU, to try and get adequate video performance out of it... But for some reason when i use "video output QTV" i just get a purple block on the screen and audio!!!
Of the remaining options, Directdraw, raw framebuffer and GDI, does any1 know what the pros and cons are? Do any seem to work better than the rest??
Will try the MP4 tip tonight and see if it helps!

I can play YouTube stuff just fine on my Tilt with the newest TCPMP. Haven't tried other stuff yet.

randomguy321 said:
So i guess then the short answer is... No??
I see that Core Player has its own codec or whatever it is, meant specially for the Qualcomm CPU, to try and get adequate video performance out of it... But for some reason when i use "video output QTV" i just get a purple block on the screen and audio!!!
Of the remaining options, Directdraw, raw framebuffer and GDI, does any1 know what the pros and cons are? Do any seem to work better than the rest??
Will try the MP4 tip tonight and see if it helps!
Click to expand...
Click to collapse
I use coreplayer version 1.2.2 and QTV display driver delivers up to 70% better performance than TCPMP. Try to find a solution to your problem on coreplayer forum.

Where did you get the 70% number from?

Im not sure if this helps...but
I converted a few movies that I had downloaded a while back thru windows media player...I think Pulp Fiction or something. It played just fine. Great video, great audio, good synchronization. Really impressive. All this on AT&T Tilt.
Keep working on it or flash a ROM since most have the support u need to watch the video. Honestly, u would probably benefit from reading the forums for about flashing a ROM than to mess with new codecs and other drivers.
Have u tried downloading TCPMP and core player. Install both. Then open TCPMP in background. Now open ur windows media player and try to play a video.
Now if u can stream videos from ninjavideo.net ur doing better than I
Cheers
-ac

Found this on the CorePlayer forums....Seems ambiguous at best...
http://forum.corecodec.com/viewtopic.php?f=4&t=1044
It seems that they have an option to enable "TyTN II driver mode" but they dont actually support the processor in the TyTN II...Odd!!
Apparently version 1.2.5 has a fix for the black screen in QTV mode (on WM 6.1 ROMs) does any1 have 1.2.5 to verify this??

That's right, they've fixed it.
randomguy321 said:
Found this on the CorePlayer forums....Seems ambiguous at best...
http://forum.corecodec.com/viewtopic.php?f=4&t=1044
It seems that they have an option to enable "TyTN II driver mode" but they dont actually support the processor in the TyTN II...Odd!!
Apparently version 1.2.5 has a fix for the black screen in QTV mode (on WM 6.1 ROMs) does any1 have 1.2.5 to verify this??
Click to expand...
Click to collapse

ChumleyEX said:
Where did you get the 70% number from?
Click to expand...
Click to collapse
There's a benchmark option in coreplayer. Play an avi file first on QTV driver and then on Rawframe buffer you'll see the difference. Than if you're still not convinced you can play the same file in TCPMP on rawframebuffer and compare the results.

Youtube w/ the new manilla 2d works flawlessly for me, as does any .flv i just plop on the phone (without re-encoding). Streaming mobitv is a bit laggy. But other then that my video runs great. For awhile quicksilverscreen was working str8 off the website too. (seems to not be working atm however).
I installed no new video drivers or anything just manilla2d. .flv has always worked since i installed the tmpg stuff.

Yes I Can!!!!

Just installed Core Player 1.25 and it works PERFECTLY!!!!
QTV works in the new ROMs in V1.25 and it plays my videos perfectly! Benchmarking, my frame rates arent much different to the RAW buffer, but the videos visually play better, there is no tearing as scenes change, they look great....
V1.25 does the trick!!!

randomguy321 said:
Just installed Core Player 1.25 and it works PERFECTLY!!!!
QTV works in the new ROMs in V1.25 and it plays my videos perfectly! Benchmarking, my frame rates arent much different to the RAW buffer, but the videos visually play better, there is no tearing as scenes change, they look great....
V1.25 does the trick!!!
Click to expand...
Click to collapse
could you help a noob out, maybe with download links or something...
first of all, what is QTV? is it better than tcpmp? how do I get youtube videos to work? what is v1.25? I am using duttys 6.1 rom, this will work on my phone right?
sorry for all the questions.

brilliantslide said:
could you help a noob out, maybe with download links or something...
first of all, what is QTV? is it better than tcpmp? how do I get youtube videos to work? what is v1.25? I am using duttys 6.1 rom, this will work on my phone right?
sorry for all the questions.
Click to expand...
Click to collapse
here is what i think of from the top of my head...qtv is one of the options in the video driver selection in Coreplayer...Coreplayer is the paid version of tcpmp...From my experience, it really smoothens out the transition of scenes in this mode, but it also depends on how the video is encoded I think, coz' the movies I had encoded much earlier which i used with my treo 650 were still choppy even with the qtv display....But my recent acquisition, Ironman, it plays quite flawlessly...
v 1.25 refers to the latest version of Coreplayer, which fixes most of the bugs of earlier version...You can scope it out at corecodec.com, but sadly there is no trial version for it though so if you really want to watch and play videos on your tilt, it might be worth it for you...
As to the youtube videos, you can either:
Buy and use Coreplayer
Download the Youtube player extracted from the opal
Use the recomp version of tcpmp, the orginal won't work on the 6.1 so look for the recomp
Or if you wanna show off a bit on the bus or something, download opera 9.5 and flashlite 3.1, The flash vid will play as a part of the web page....

No sound while recording video?

Hey guys.
Yesterday, I went to a Bullet for my Valentine concert here in Brussels. I took my brand new HTC Diamond with me to shoot some videos.
After that, I got home and decided to view them.
I couldn't hear no sound! (Volume of the phone checked)
Then I tried to shoot another video while having the phone in normal mode (not silent as in the gig) and still same isue...
Any solutions?
Regards

While in the video recording mode, click on the settings tab (bottom right, gear icon).
You should now be presented with four options, choose "Advanced"
Now at the bottom of the screen you should see a right and left arrow, click the right arrow once.
The second option from the top is "Record with Audio" I would take a good bet that yours is set to off... yeah go ahead and change that to on.
Hope thats your problem... if not, your outa' luck

I guess I'm out of luck then...

Does your mic work in general, such as in a phone call.
If yes, then your simplest solution but drastic fix. Is a hard reset.

Yeah, mic does work properly. I guess I'll try a hard reset then.
Thanks!

Hi,
I have the same problem. The sound while recording video is very low. looks like the hands free sound record type is not active while recording videos.
A hard reset doesn´t help. do you know if there is some king os tweak to solve this problem?
Greets

same problem here
i didnt have this problem on htc offical rom
but after upgrade to dutty rom i have this problem
i think it because the camera software it self
in dutty rom he use the latest update of camera software i think this version use deffrent audio format .samr
even the computer VLC player cant play this format
---------
erorr : No suitable decoder module:
VLC does not support the audio or video format "samr". Unfortunately there is no way for you to fix this
---------
this erorr from VLC Player

Have you guys found a solution to this? i have Dutty's ROM and it will not record with sound. My previous ROM was fine, this one does not work...

anyone????

You will be amazed, but... open Media Player (and any other player that is installed) and modify the sound volume to maxim. After this, try to record video...

testerics said:
You will be amazed, but... open Media Player (and any other player that is installed) and modify the sound volume to maxim. After this, try to record video...
Click to expand...
Click to collapse
grr...didnt work =/
I increased the volume on windows media player from 77% to 100% and maxed out TCPMP...still records with no sound...I went into preferences and checked the box that says record with sound as well...

anything else anyone would be able to suggest? anyone had this problem and solved it?

guess ill have to deal with it =/

Malik05 said:
grr...didnt work =/
I increased the volume on windows media player from 77% to 100% and maxed out TCPMP...still records with no sound...I went into preferences and checked the box that says record with sound as well...
Click to expand...
Click to collapse
Try to uninstall TCPMP and other players or programs that could interfere with sound on your Diamond, soft-reset, and try to record again... maybe this could help.

testerics said:
Try to uninstall TCPMP and other players or programs that could interfere with sound on your Diamond, soft-reset, and try to record again... maybe this could help.
Click to expand...
Click to collapse
uninstalled TCPMP and soft reset the device...still a no-go =/

Malik05 said:
uninstalled TCPMP and soft reset the device...still a no-go =/
Click to expand...
Click to collapse
It looks like you need the new official 2.0 ROM upgrade...

Malik05 said:
uninstalled TCPMP and soft reset the device...still a no-go =/
Click to expand...
Click to collapse
Well this worked for me.. see if this works for you.
Copy the file to pc. Rename the file and change the extension from ".MP4" to ".3gp".
Should play now on the Real Player or QuickTime.

Lemme know if it works!

rxpaul said:
Well this worked for me.. see if this works for you.
Copy the file to pc. Rename the file and change the extension from ".MP4" to ".3gp".
Should play now on the Real Player or QuickTime.
Click to expand...
Click to collapse
IT WORKS!!!!!!!!!
renaming the mp4 to 3gp makes the video play with sound!!!!
thanks!!!!

Video Recording

Video recording app now in the market, tested and works ok overall but no sound. To stop recording hit back button. Very buggy!!

watts da name of it

yeah it's working well.
very, very buggy mind you, alot of force closing but, hey, it works i suppose.
quality's not too bad but it's really slow, so as long as you keep still it works fine
i'll get a little video uploaded to show you.

illrific said:
watts da name of it
Click to expand...
Click to collapse
Video Recorder/Video Camera

can anyone find where it is on the sdcard and here is more info[URL="]http://www.android7.org/forum/viewtopic.php?f=10&t=5[/URL]

santaninja said:
can anyone find where it is on the sdcard and here is more infohttp://www.android7.org/forum/viewtopic.php?f=10&t=5
Click to expand...
Click to collapse
Been trying to find it myself, all it has in the program file is a bunch of blank pics! Man its a start but buggy as hell!!!

on the website it says there's gonna be an update in the next 2-5 days so lets hope the bugs get ironed out. also i'd quite like to see more stable recording and sound
but maybe i'm asking too much

Interesting. Pity about the bugs and no sound, but it's a start, which is very good.

Good start. Bring on the updates.

Keeps asking to update! very annoyin

i saw this app today, for some reason decided not to download it
but its a "good" start
hope to see this being updated constantly.

How could u not even try it out .
I grabbed it as soon as physically possible.
It needs a lot of work.
And yes, MJPEG
Really needs some work haha.
EDIT: I just realized that my post has a lot of smilies

Update Released!
New update with a much cleaner interface. The videos are stored(i use this loosely) onto the sd card in /.org.android7/videorecorder. Uses about 16m for 10 seconds of video. The audio works as long as you also have the VoiceClient installed, it's not very loud but it's there.
After opening the app press record to open the recorder window(your not recording yet) hit menu-record to record and the same to stop recording.
I'm curious how the recording is working? It would be nice to at least be able to re-assemble the recordings on my machine.
In the video folder there are two file types blah.3gp [16kb] (appears to only be the audio) and a group of blah.jpg [~225kb] images (tho these are not viewable even on my pc?) any ideas?
The videos it makes are not viewable on any of the other viewers on android either. (the only thing it's really missing)

Well, it seems to get better with updates.
2 things i realized...
1) When you replay a video after you record it, it plays like its on fast-foward or 2x.
2) If you delete a video from your phone, the video gets deleted(Why is 30 seconds of recording 32 Megs by the way?) BUT the audio files from the video(which the file type is .jpg also, weird?)stays in the anroid7.org folder so they never really delete, you have to manually go in there and delete them when you USB to your comp.
Either way, i consider the effort and applaud him for the first video recording app of its kind on the android OS, i see potential in the future.

built-in video player?
I'm confused.. I know g1 doesnt have a built-in icon for video player but i just noticed that i can open a video file using an astro file manager (unless astro has a video player itself).. it has an auto-rotate function too and looks like the Video Player in the Market.. hhmm.. And currently, I dont have any video player program installed in my G1... Can someone clarify this?

Ya, I've tried rebuilding the 'video' into something useful. The Audio file name is xxxxx.jpg.3gp (amr i believe) and the images 225k each ~2/sec don't appear to actually be .jpg, nor can i get them open with .gif .bmp .jpeg .png as extensions
this is on windows, maybe they'll turn up something more promising on *nix.

I quit testing this.
It's not encoding nothing only take fast pics and save de audio on 3gp format.
It's good to see that we can take pcitures so fast because this show us the real posibilities with this cam on HTC G1.
Google has to build something using the internal h264 posibilities of decode/encode(i guess) to encode the pics and audio on real time(too heavy processing ?)
Till that time....just wait and see

It CAN.
WinMo guys did.
Prove me wrong.
HTC Touch Diamond T-mobile G1
Main specs:
Qualcomm MSM7201 CPU Qualcomm MSM7201 CPU
192 MB of RAM 192 MB of RAM
3.2 MP Camera, no flash 3.2 MP Camera, no flash
OS: WinMo OS: Google Android
Videorecording:
352x288x30fps None.
So:
1) It is definately technically possible.
2) Hey, WinMo does Android, the open source, WTF???

Where's Our Video Player?
Does anyone remember TCPMP / Core Player on WinMo?
Why can't we have that satisfaction on our G1's???
Is it the hardware-decoder thing? Is it OTW?
Anyone know what's up?

There is a video player, It's called Video Player....