Just curious...
I've had the phone for just over a week, and have the Kang-O-Rama bundle installed. Overall, it's awesome...
What I have noticed though is that there doesn't appear to be a tone for incoming call waiting. A couple of days ago I noticed I had a missed call/VM after I hung up on my current call. I tested it out by calling a friend and having another friend (who was with me) call me while I was in the call. There was no audible notification while in call.
I then activated the "vibrate incoming call waiting" or whatever option and that appeared to work, but still no tone. And even the vibrate may be hit and miss, as I missed another call today while on a call.
Does the Nexus One not have a call waiting tone? Is it buggy? Is it the CM ROM?
yes I am having same problem but I am using home rom.
I think I have seen this, but not quite what you describe. my phone beeps only the first time for call waiting, then it stops. maybe this is the way its supposed to be cause I like it like that.
Is your in call volume on low and is it enable in the settings? Setting-call settings-additional settings-call waiting checked.
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi,
Ok, i tried ringing my kaiser from another phone and realise that the kaiser only actually starts ringing/vibrating and notifying of an incoming call ONLY after 2 rings from the phone making the call.
This has an overall effect on me knowing if i am going to get calls, missed calls and calls diverting to voicemail after 6 rings...
Can someone confirm they get the same problem...
F
Frontline said:
Hi,
Ok, i tried ringing my kaiser from another phone and realise that the kaiser only actually starts ringing/vibrating and notifying of an incoming call ONLY after 2 rings from the phone making the call.
This has an overall effect on me knowing if i am going to get calls, missed calls and calls diverting to voicemail after 6 rings...
Can someone confirm they get the same problem...
F
Click to expand...
Click to collapse
Can't duplicate the problem here! It rings on the very first ring.
Hi
If the phone is in standby (it's normal state after a couple of minutes) then it will take about a ring or 2 for it turn on and sound the notification. This seems normal for all pocket PC phones. SmartPhone's behave more like normal mobiles and ring quicker as they are always on and don't have a standby mode like pocket PCs.
Having a ring tone on the storage card can also slow things down so make sure your ring tones are in the devices memory.
Regards
Phil
Same problem here.
If my phone in sleep/ON mode the incoming call will forward to voicemail.
Outbound call always work.
If I power cycle the phone, incoming call will work.
I think something not sync between the phone and the ATT network.
So ATT think my phone is offline.
Hey all...I probalby should know this as I have uses a PPC device for 2 years...but I don't remember having this issue on my last phone.
When I am on a call and get another coming in it consistently beeps/rings for the call waiting.
I have set my phone up to wait 30 seconds before going to voicemail (as I am not always around the phone). Because of this if I am in the middle of a conversation and get another call, I can't hear the other party (and am distracted myself) because my phone keeps ringing the other line for 30 seconds until the call is rejected.
When using MS Voice Command, I get the same thing with incoming announcements. If I am on the phone with Caller A and then Caller B calls, MSVC keeps saying "Incoming Call from Caller B."
I don't want to turn off Call Waiting, but I would like to change the notification so it is only a beep or something simple every 5-10 seconds and not a continuous ringing or talking.
Is the caller ID ring/tone able to be managed differently from the ring tone/announcement? What is the best way to manage this?
thanks
bumping to see if anyone has advice?
I have Same Problem With BlackStone and this annoying me so much
Any advice ?
PhoneAlarm has a setting to Vibrate for alerts while in a call.
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
I'm currently on the Android N preview. During a call i hear a "Beep Beep" every ten seconds(Sounds like call waiting). Is there a way to stop this sound? I've checked the phone settings and call settings But I don't see anything that addresses this sound. Any one else have this problem or annoyance?
I'm using as daily driver, and I didn't hear that sounds.
rrubio999 said:
I'm using as daily driver, and I didn't hear that sounds.
Click to expand...
Click to collapse
Yes..it's odd. I was on a call..no beeping. Received another call,clicked over..the sound started. I then ended call..called back no sounds. It's random..
Beeping is often a sign that the call is being recorded, no...?
I get the two beeps just before a call is initialised. One low pitch and second higher pitch right after. Usually happens at 2 locations in the City of London. Doesn't happen anywhere else!
Beeps on stock ROM and also on Pure Nexus r22 rom.
So you're not the only one
Had this happen to me for the first time yesterday, after switching from one call to another. It stayed active, even after I hung up both calls and made another one. Fixed on reboot.
BaumerS4 said:
Had this happen to me for the first time yesterday, after switching from one call to another. It stayed active, even after I hung up both calls and made another one. Fixed on reboot.
Click to expand...
Click to collapse
I had multiple calls today with no beeping. Same callers as before. I'm just wondering what causes it. It's more of an annoyance than a problem